Hello,
I own a Qtek 9100
Rom 2.17.7.2
Ext.Rom 2.17.7.102
It connects without any problem to any classic wireless router, but it won't connect to the Belkin Pre-n router (F5D8230-4 - version 1). I flashed the router with the Linksys WRT54GX firmware 1.02.06 (since it is the same chipset), but that didn't help.
The SSID is broadcasted and found by the Qtek, but no IP address is delivered (regardless if WEP key is set or not).
Does anyone have a clue what can be changed to make this working ?
BR. Frans
Same problem
I have the same problem with connecting to Belkin pre-N wifi router using my T-mobile MDA
Wizard with Belkin Pre-n router wifi problem
I found the answer. Just turn off QoS, it will connect without any problem.
Ok I have Helmi's WM6 ROM and I am desperately trying to find a way to get the wireless functionality to connect to a router at work which *must* negotiate via WPA-PSK / AES.
Is there *any* way I can get my device to negotiate via AES, I can only see TKIP.
Thanks in advance
John
I have tried searching the forums for "AES" but no posts were returned, which is odd. I have also tried searching for encryption but there doesnt seem to be any relevant posts.
because i think that the device does not support it
Thanks xplode, I feared as much. One would hope that it would be possible in software, and that the wireless network layer would be upgradable via software.
Which router do you have? Most of them can be set up to allow either AES or TKIP or a combination of both...
PoGa
Poga,
I can connect to my router at home without any issues whatsoever, however it is the router at work that I can not connect to. I have no control over the authentication methods of the router, and the sysadmin will not change the protocols to suite my wireless tastes.
Ho hum
I've recently upgraded my BA to WM6, and without making any changes to my wifi router (Netgear DG834G v3), it now will NOT connect! I was and still am using WPA/TKIP security.
Previously on the original vanilla Orange SPV M2000 WM2003SE o/s it connected fine.
Interestingly, if I disable all wireless security on my router, the BA connects up just fine.
Downgrading back to WM2003SE does not restore WPA/TKIP connectivity to my router.
I've tried a couple of Helmi's WM6 roms and am currently running DVH's WM6 5.60.01 build 18548 with the same frustrating results.
All my WM6 upgrades on my HTC Tytn (SPV M3100) don't have any issues with wifi connectivity. Odd...
I'm pretty sure it's not the router as I've tried it with a 2Wire ADSL access point too and it's the same.
Any ideas guys?
Same thing is happening to me... No WPA connectivity.
No security in router and all OK
WPA on BA
Actually the devise supports it! But there are no drivers!
As I had WM5, WPA-PSK worked fine, but in WM6 it is not implemented...
Just a question, would it be possible to import and use WM5 drivers and what esle necessary, from WM5 to WM6?
In WM5 It worked OK thats right!!
Is the drivers the answer to the problem?
the drivers we use in any WM6 rom are from WM5 so it is understandable to not work quite well
here WPA-PSK with TKIP encryption is working just fine - my router is Linksys WRT54GC
AES encryption is not supported by the BA WLAN Driver
The hardware of the BA dor Wifi ins't the same as any other PDA device?
Can we copy the drivers from another device to our beloved BA?
i don't think so, if it was that easy my roms would not have wlan issues at all
nice one xplode!! dum coment
Hy folks,
I have a problem with my wlan.
my qtek 9100 finds - without problems - my network. But i can connect to it. My normal pc runs over the encryption wpa/psk without a 802.X-encryption. It runs without problems.
As i tried to activate 802.x, my 9100 could connect to the network, but my normal pc could not connect anymore.
but on my qtek, i could not switch off the button IEEE 802.x when i would like to install the network with wpa/psk
can someone help me to install my wlan working with ppc and pc?
thanx in advance
christian
Hi,
i have strange problem with my htc 3600 and siemens wifi dsl router se568. My ppc connects to router but i can't ping router or access internet or any other computer on network. Strange thing is that my ppc connects to other wireless networks without problems. I tried 2-3 laptops and they connect to siemens router. Also i tried some other pocket pcs and they connect also to my siemens router. only combination that doesn't work is my htc 3600 and router.
Anyone has any suggestion how to solve it?
One more thing i use WPA-PSK TKIP encryption.
Igor
komple said:
Hi,
i have strange problem with my htc 3600 and siemens wifi dsl router se568. My ppc connects to router but i can't ping router or access internet or any other computer on network. Strange thing is that my ppc connects to other wireless networks without problems. I tried 2-3 laptops and they connect to siemens router. Also i tried some other pocket pcs and they connect also to my siemens router. only combination that doesn't work is my htc 3600 and router.
Anyone has any suggestion how to solve it?
One more thing i use WPA-PSK TKIP encryption.
Igor
Click to expand...
Click to collapse
Ok found solution. For some strange reason when I put wifi preferences fon pda Best Performance it connects and works fine. When i return it to Best Battery it will not connect. Strange. Probably it is something with my wifi router.
Igor
I can only see WEP in my Wifi setup, is there an update to enable WPA/2 encryption ?
I connect my p3600 to my WEP secured network, so i guess it sould work on p3600i too.
Hope that helps
yes WEP works ,but I'd like to change my home wifi to WPA as its more secure but looks like the phone doesn't support this protocol.
which is strange as I think this has been out for a few years , isn't this included in WM 6?
I'm using Lalle's latest Manila 2D ROM, and I got WPA as well as WPA2 available. I guess it depends on the ROM you're using.
Sorry I misstyped
I wanted to say:
I connect my p3600 to my WPA secured network, so i guess it sould work on p3600i too.
Hope that helps
Sorry for missleading
its funny u should be asking this im have big issues getting my spv m700 to connect to me belkin g mimo + router its set to wpa psk tkip and i cant connect it attempts to but no good just stops then comes up with a cross on me router name only way to get it to see me router as there again is to reset the phone.
now it connects to me dads fine and thats the same router only diff is firmware.
any one else had this if so how was it fixed.
p.s i allso have a ipaq rx3715 does the same thing it wont connect to me router.