Am I missing a step? - 8125, K-JAM, P4300, MDA Vario General

I'm kinda of a newbie to the whole flashing the HTC 8125...I've searched and searched and downloaded a couple of ROMS that I would find pretty cool on my phone but...whats next? I got a Cingular 8125...I did the hardSPL..and heres what I got...
Wizard Service Tool v4.2.2
18/02/09 02:08:43
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: ----------
=> Bootloaders:
IPL: 2.21.0001 (G4 device)
SPL: 2.21.Olip (G4 device w/ HardSPL)
Built on Aug 26 2007 at 19:41:34
Copyright (c) 2007 Olipro & HTC - Hard-SPL
=> Firmware:
OS: 5.1.xxx (Build 14928.2.2.0)
ROM: 2.25
Registry AKU: .2.2.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.25.11.102
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
ee9df2f2 - 5.00M (0x4fec00)
6ea9d13a - 48.23M (0x303c000)
0fb25f92 - 50.95M (0x32f4000)
0fb25f3e - 2.94M (0x2f0000)
2fb25fb6 - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000306901051024050918060635
Key Index: 84
All Done.
I still got WB5 on my phone..and I tried TNT.1933 touchflo..by hooking up my phone with a usb and activesync..but when I ran the RUU it said file error..do I have to upgrade to WB 6.1 first and if so...where do I get it (ive searched wiki and everything I could search here) or am I missing a step? Any help would be great, thanks!

need help?
hi there.... it seems you have unlocjed the device...
now, when you try to upload a new ROM. first of all, the device must be "connected to PC" using activesync (v 4.5)
then u have to run RUU.... in fact most roms you download have the RUU inside... so send me message if need help... send message...
GOOD LUCK

Nothings wrong there and you don't have to upgrade first to any rom,All the wm6 or wm6.1 roms can be flashed directly,as its already HardSPL,you can flash any wm6 or wm6.1 roms as much as you like,but just don't flash any official stock rom,it contains IPL/SPL,it'll Brick the phone.
If its a 'File Open' or 'File Read' error,re download the rom package again and run it,it may be the rom you downloaded is corrupt or missing some files.

Related

New MDA - Unlocking not working

Hi All.
I've tried everything, well, almost but at least a lot... and my new MDA won't seem to unlock!!!
Here is the data:
ROM versie: 2.21.2.5 NLD
ROM datum: 3/9/06
Radioversie: 02.19.11
Protocolversie: 4.1.13.09
ExtROM versie: 2.21.2.108
Modelnr: WIZA200
Seems to be fairly new, haven't seen this version around on the forum.
What do I need to do?
Error message that I'm getting while unlocking:
ERROR: ITWriteDisk - An internal error occured
Please help!!! I would like to have my MDA unlocked!!!!
Cheers.
SignorE
for those of you having problems with lockiwiz 3a not unlocking your phone, well i was having the same problem, but not for long because i discoverd what i was doing wrong.
when you download lokiwiz 3a you have 2 things, lockiwiz and a folder called utils, now in the folder utils you will find a file called enablerapi its about 70kb in size, copy this to your MDA vario in the my documents folder, once there run it by tapping on it in my documents on your MDA saying Ok to everything, once youve done that, then and only then try running the lockiwiz application on your main pc making sure your connected via ActiveSync and look for the SIM unlock code in the black command promt box and jot this number down, then put SIM card in thats different from the one you use and switch on, when asked for the unlock code just type in the number you jotted down and bobs your uncle!!! well he was for me thats is.....good luck. :lol:
mda charmer
MDA
CALLED CHARMER WITH CHIP G3 G4 WILL NOT WORK
MDA
CALLED CHARMER WITH CHIP G3 G4 WILL NOT WORK
Click to expand...
Click to collapse
@chiragp: are you saying i cannot ulock my mda?!?! :'(
cheers.
signorE
Szabika, HU
Wowww.
Million ThanX for any line!
It's Cool!
Nagyon köszönöm!
New Mda Vario - help unlocking
Total Summary
IPL Ver : 2.21.0001
SPL Ver : 2.21.0001
Model WIZA200
ROM : 2.21.2.6 WWE
ROM Date : 03/09/06
Radio Version (GSM): 02.19.11
Protocol Ver : 4.1.13.09
Ext ROM : 2.21.2.109
OS : 2.24.2.6
Flash Chip type : M systems
--
With some reading I think my Vario is G4 --- Is that correct ....
Can I use lokiwizMSL 0.3a to unlock it...

Unable to boot Qtek 9100/SPV M3000/HTC Wizard

hello everyone,
I recently bought a locked Qtek 9100 (SPV M3000/HTC Wizard) and I was trying to unlock it using lokiwiz v0.2. It went through all the steps without any problem, but one... it was still sim locked!
Maybe because my phone is a new version, as it had Feb 06 as its original date... I don't really have any clue.
As this didn't work, I tried to find out in Google if I could find any unlocking code, even if I had to pay 30 euros for it, as that free tool didn't work it out for me.
I used www.gsmliberty.net, paid for it, followed all their instructions - again, everything went perfect - and in the end... ... my phone is not working anymore!... It doesn't even get to the Windows Mobile Logo...
It shows HTC logo and the provider logo, but then reboots and keeps going on this cycle as long as the battery lasts.
I've tried to hard reset, but it stays all the same! I do everything as I have found out in every forum that has some information about it, and it still can't get out of this rebooting cycle...
Can anyone help me on this?
I fear that it had some kind of advanced protection against known unlocking tools and now its ruined for good
Please tell me that we can work this out! The phone was working perfectly before, when I inserted a SIM card that it allowed (from the phone's provider...)
Any help will be most welcome!
Cheers
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
meschle said:
Sorry to hear of your problems. Please tell me the details of the rom including the ipl and spl numbers. Is the rom a qtek one? - your post is confusing.
I would try reflashing the device with the original rom as the format has failed to do anything.
Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.
Click to expand...
Click to collapse
Thank you for your help!
My ROM version is: 2.18.7.2 PTG (15 FeB 06)
IPL: 2.18
SPL: 2.18
I also have this numbers, which I wrote down before the phone got ruined...
Radio Version: 02.10.10
Protocol Version: 413.1.03
ExtROM: 2.18.7.9161
Which of the files in that FTP should I download?...
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Perfect! Didn't want to do anything wrong this time.
I'll do it tonight, when I get home. Hopefully this will turn it around for me...
I'll let you know.
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
hveiga said:
The least I can do is to say THANK YOU!
You have no idea of how much you can to to make the world a better place.
Thank you so much!
If there's anything I can help this forum in, please do let me know, I'll be glad if I can somehow pay back this enormous piece of advice.
Click to expand...
Click to collapse
No problem glad you got it sorted. I like to help (this is what this FORUM is for) and would hope that it does make a difference. Best way you can help is learn, learn, learn and then help, help, help others. The helpers in the forum seem to come and go so i suppose there is a shortage, most come for info and advice. I enjoy posting helps me relax lol thats why i have over 1000 posts - must be well chilled out by now :wink:
btw do other sims work in your device now - if not ask for your money back!
dun know
hi guys i need help here i'm using spv m3000 with french langueage
i did follow as what told in this part (Download rom from here ftp://[email protected]/Wizard/Roms/Qtek/ password is xda.
To get to the bootloader screen to do this, turn off your device then press and hold camera button and then power on. You should then reach the multicolored bootloader screen. Connect to pc using usb cable and you should see usb in bottom left of screen. (the device does not need to be activesynced to flash rom) then start exe on pc and the device will reflash.)
one thing i dun get is what is exe and where to find please help me
my ipl is 1.03
spl 1.03.0000
os 1.3.1.4
exe is the RUU (RomUpdate Utility) icon in the Rom you downloaded,just run the RUU,it'll start to flash.
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
chanra said:
hi thanks for ur info i did try to flah the rom ruu but it cannot
flash the rom is there anything else i forget to do /
i did follow all the instrution where i can get the upgrade rom for french version for this pda phone
btw i'm using window vista
Click to expand...
Click to collapse
Vista is still not compatible for flashing,use winXP,its highly recommended and doen't give any problems.
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
chanra said:
hi thanks alot for info
i did flash wt english rom i use as what u told ( winxp)
thanks alot i wont forget ur help
(zabardast_1)
Click to expand...
Click to collapse
Thanz!
It was my pleasure to help you,glad you got it working
I have problem n unlocking M3000
I have problem in unlocking SPV M3000.
IPL 2.16
SPL 2.16
meschle said:
Looks like your rom is portugese so this will be the one
ftp://[email protected]/Wi...digy_2180702_21807102_20710_QTEK_PTG_Ship.exe
Click to expand...
Click to collapse
i try to download from link but ask for FTP pass !? what is ?
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82
qtek wizard upadting
Hi am new here,
can i updat my device ?
i like to improve the GUI of my pocket pc ,ist possible?
now my device running wm 5 ,can i updat for wm 6?
my device is Qtek wizard200
and more as follows.
suggest me ...thank u
22/09/09 12:02:51
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: .................
=> Bootloaders:
IPL: 2.18.0001 (G4 device)
SPL: 2.18.0001 (G4 device)
Built on Feb 14 2006 at 18:47:41
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14955.2.3.0)
ROM: 2.26
Registry AKU: .2.3.0
Radio: 02.25.11
Protocol: 4.1.13.12
=>Extended_ROM:
Version: 2.26.10.105
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
8fb7d682 - 60.63M (0x3ca0000)
ee9e4266 - 9.99M (0x9fd800)
4ea9d13a - 43.24M (0x2b3e000)
cfb25f96 - 50.95M (0x32f4000)
4fb25f42 - 2.94M (0x2f0000)
0fb25fba - 3.06M (0x30fc00)
=> DOC chip unique ID:
00000000813902052e1c1780140406da
Key Index: 82

T Mobile MDA VARIO HELP ME !!!

hi all.
i m using T Mobile MDA Vario PDA.
i ve installed lastest rom version of TNT.19199_Professional_Wizard.
but i have problem. i hear no voice and my voice does not go out while i m talking on the phone.
when i use earphone i can hear voice and my voice goes out. there is no problem.
when i click Start->Setting->Phone and choose a melody, i hear no voice but if i use the earphone i can hear.
when i m called, the melody plays.
i ve resetted it and installed orginal rom but it did not return the old version.
in last days, i used to listen to music with earphone.
may a problem about earphone input or any switch about the earphone realizes that earphone plugged out?
help me pls. i will crash this product.
ınfo
Wizard Service Tool v4.2.1
31/03/08 15:18:49
CPU: Texas Instruments - OMAP850
MODEL: Wizard
IMEI: XXXXXXXXXXXXXXX
=> Bootloaders:
IPL: 3.08 (G3 device)
SPL: 3.08 (G3 device)
Built on Nov 13 2006 at 14:02:18
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.2.xxx (Build 15342.4.0.01)
ROM: 2.18
Registry AKU: .4.0.01
Radio: 02.69.11
Protocol: 4.1.13.30
=>Extended_ROM:
Version: Unknown
Name: Extended_ROM
Status: hidden
=> Drives and partitions:
|--Handle--|---Size---|
6fb7e6f6 - 963.38M (0x3c360600)
afb7e78e - 19.00k (0x4c00)
ae9d180e - 9.99M (0x9fd800)
4ea98042 - 48.23M (0x303c000)
eeb26272 - 50.75M (0x32c0000)
6eb260a2 - 3.06M (0x310000)
8eb2606e - 3.06M (0x30fc00)
=> DOC chip unique ID:
000000007a2c02013a2e008d020c05be
Key Index: 2
All Done.
Sometimes the fastening clip in the earphone input jack in the phone gets stuck and doesn't get released properly and go back to its releasing position,so can only hear voice through earphone and not through normal speakers.Put in the earphone jack pin in the input jack and pull it out with a jerk,it gets work ok,otherwise try to move back the clip with a small needle pin.
thank you very much. i will try it this evening. if i cant fix the problem i will turn you again )

Wi-Fi problem (WM6 / WM6.1 rom )

hi ı am not spaek eng.
wifi problem wm6 and wm6.1 ı loaded but wi-fi problem.
entered once to the cırcuıt.
WM5 there isnt the problem.
wm6 only is becoming problem
What can ı do ?
ı am sorry speak eng. bad
T-Mobil MDA WM5
G3 unlock
ipl spl = 1.01
rom = 1.1.93
rom date =9/16/05
radio =01.01.10
protocol = 4.0.13.16
extROM = 1.1.9.104
Many of the wm6 and wm6.1 do not auto connect to your network. You need to go to settings - connections - wifi, and manually connect to your network.
Give it a try
bill_in_mtl said:
Many of the wm6 and wm6.1 do not auto connect to your network. You need to go to settings - connections - wifi, and manually connect to your network.
Give it a try
Click to expand...
Click to collapse
bill_in_mtl thanks
manually isnt being useful in this method to the work.
but once find but be fastened
only WM5 isnt wi-fi problem.Why didnt ı understand
Wizard Service Tool v4.2.2
08/05/08 00:31:47
CPU Manuf. FAILED
MODEL: Wizard
IMEI: 35792700*******
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14402.1.1.0)
ROM: 5.1
Registry AKU: .1.1.0
Radio values FAILED
=>Extended_ROM:
Version: 1.1.9.104
Name: Extended_ROM
Status: hidden
=> DOC chip unique ID:
0000000057340204181d04b709090516
Key Index: 24
----------------------------
Reading CID block...
Calculating CID block sum...
CID checksum: 8A1C7412
Decrypted stored sum: 3DC9DB45AAE46633
Decrypted calcd sum: 3DC9DB45AAE46633
Key index : 24 - Block index: 170
CIDkey: MODULESN
CID IMEI: 35638100005****
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
-------------------------------
Reading CID block...
Calculating CID block sum...
CID checksum: 8A1C7412
Decrypted stored sum: 3DC9DB45AAE46633
Decrypted calcd sum: 3DC9DB45AAE46633
Key index : 24 - Block index: 170
CIDkey: MODULESN
CID IMEI: 3563810000*****
SIM lock status: 0000000000000000
Your phone is already SIM unlocked!
What is the problem according to you ??
All Done.
ferfecir said:
Wizard Service Tool v4.2.2
08/05/08 00:31:47
CPU Manuf. FAILED
MODEL: Wizard
IMEI: 35792700*******
=> Bootloaders:
IPL: 1.01 (G3 device)
Built on Sep 19 2005 at 18:00:32
Copyright (c) 2003 High Tech Computer Corporation
=> Firmware:
OS: 5.1.xxx (Build 14402.1.1.0)
ROM: 5.1
Registry AKU: .1.1.0
Radio values FAILED
=>Extended_ROM:
Version: 1.1.9.104
Name: Extended_ROM
Status: hidden
=> DOC chip unique ID:
0000000057340204181d04b709090516
Key Index: 24
----------------------------
Reading CID block...
Calculating CID block sum...
CID checksum: 8A1C7412
Decrypted stored sum: 3DC9DB45AAE46633
Decrypted calcd sum: 3DC9DB45AAE46633
Key index : 24 - Block index: 170
CIDkey: MODULESN
CID IMEI: 35638100005****
CID: 11111111 (SuperCID)
Phone is already CID unlocked!
-------------------------------
Reading CID block...
Calculating CID block sum...
CID checksum: 8A1C7412
Decrypted stored sum: 3DC9DB45AAE46633
Decrypted calcd sum: 3DC9DB45AAE46633
Key index : 24 - Block index: 170
CIDkey: MODULESN
CID IMEI: 3563810000*****
SIM lock status: 0000000000000000
Your phone is already SIM unlocked!
What is the problem according to you ??
All Done.
Click to expand...
Click to collapse
wi-fi problem
Your ROM is not WM6 according to the build number and AKU as revealed by the WST. You must make sure you have upgraded to the latest factory T-Mobile MDA ROM and then upgrade your device to WM6.
jwzg said:
Your ROM is not WM6 according to the build number and AKU as revealed by the WST. You must make sure you have upgraded to the latest factory T-Mobile MDA ROM and then upgrade your device to WM6.
Click to expand...
Click to collapse
RUU_Prodigy_3821_382119_026911_TMO_UK_WWE_Ship (3.08)
and
XM6r5Lite wm6
test negative
The IPL, SPL and radio ROMs are *way* out of date.
You'll want to get up to a 2.x IPL/SPL so you can use a 2.x radio ROM.
Get this file from the T-Mobile US web site:
MDA_software_update_226102_22610105_022511.exe
Update your phone with that file.
This will give you WM5 AKU 2.3 with IPL/SPL: 2.26 and radio: 2.25.11.
Once you have that installed, you can upgrade to any of the WM6 ROMs floating around that are designed for the device such as the TNT ROM.
Since the cooked WM6 ROMs are OS only, they don't have an IPL/SPL to flash and they don't always have a radio ROM either. This is for safety reasons.

O2 Xda Orbit - The Image file is corrupted. Please check your Update Utility

Hi folks!
I have a O2 Xda Orbit (in the wiki, the cruiser version).
Whenever I run the update tool to update whatever (splash screen gsm radio version, rom) it spits out this error:
The Image file is corrupted. Please check your Update Utility
What is wrong?
Device details:
ROM Version: 3.4.206.2 WWE
ROM Date: 4/18/2007
Radio Version: 02.67.90
Protocol Version: 4.1.13.28
-
Thanks in advance
Are you in Windows Vista? (Try Windows XP)
Do you have an SDHC card? (Take it off)
And don't forget to run USPL before you flash anything.
Also you can search for a newer version of the update utility (although I don't know if that will work).
thanks for replying
Hi!
First, thanks for replying.
USPL is the one that makes my screen show a tux pinguin, right? (how cool... can we run linux on that? )
if I run uspl firts it freezes showing a penguin and its not connected to computer via activesync, therefore not able to connect with rom updater
I will try to remove sdhc card

Categories

Resources