Hello,
Since recently I have a weird problem. It started with typing a SMS via the keyboard. When I hit the letter L the device became inresponsive. I softresetted my Wizard and tried again. Same thing.
I then used my virtualkeyboard instead. Same thing. So it doesn't appear to be a hardware issue.
I have reinstalled Windows via a Hard Reset, and it happened again.
This is very annoying since I have to think of text without using the letter L.
Now the annoying part is that since today it is also with the letter A sometimes.
Anyone got any ideas ?
I am using a Windows Mobile 6.1.0.0 ROM NL JvdSpank
Rom date 1/16/08
radioversion 02.71.11
Protocolversion 4.1.13.21
IPL 2.21.0001
Same Problem with "d"
Hi there,
i've got the same problem with "d". I'll try to fix this by going back to the original rom and then flash my actual rom again.
Does anyone else have an idea ? It is really annoying.
Ok, extra symptom. It still happens when pressing L or A, but not all the time.
And apparantly it's NOT a complete freeze, I managed to get in the Taskmanager where I found that the SMS application goes into a 100% cpu utilisation, eventually rendering the system unoperable.
Related
I have problem with my XDA II which is just been upgraded to 1.66 Chinese ROM. The problem is the machine will freeze right when I turn it on. It only shows the last screen when it shuts down with the automatic shut down setting. No buttons will work at all. This happens about once per day. I was not able to softrest or hardreset. Only if I take out the battery and put it back again, the PDA will hardreset by itself. I had no such problem with the old 1.52 Chinese ROM version. Is anyone experincing the same problem as my? Does anyone know how to stop it from happenning again?
same problem system freezes
I have SX56 I have installed some wav file from net but after some when I hardreset it the system got freeze and now I am not able to start the PDA no buttons are operating please help if any one has got the same problem
Hi all,
Since last friday I'm the happy owner of an S200, until sunday atleast. After a soft-reset, initiated from windows, my device won't boot anymore. It hangs in the red-green-blue bootloader screen (says: IPL 2.09, SPL 2.09). I've tried soft-resets and hard-resets, but the device would consequently keep hanging in the bootloader.
So for the past few days I've been searching the web and just managed to update the ROM. I was expecting that updating the ROM succesfully would mean my device would boot again, but it still keeps hanging in the bootloader (saying IPL 2.09 SPL 2.15 now, so the update did take place).
Does anyone has any idea whats wrong with my phone? Or how to fix this? Please help.
* bump *
I've been searching further and tried to do a SD dump, but I'm getting the message I don't got enough rights to perform a SD dump. This meens my S200 isn't CID unlocked. Is there any way to CID unlock the device without the need of booting into WM?
The solution to your problem
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
hi syzzer,
i really feel with you - why? - i have the exactly same problem. after i tried to upgrade my rom from o2-germany to another one the device isn't starting anymore and hangs in the beautiful-colored bootloader. and now, if i just even want to re-install the same or another rom, doesnt matter which one, the s200 wont start again. i think this is a really unlucky situation for us to stand alone with our weak pda =) hoping for more help, otherwise we have to take up our warranty and try to get it fixed by the store we did buy it (if a rom-update damage is still in warranty )
good luck
budy!
awechris said:
Hello, if you are having bootloader screen right after starting your mobile (prophet) check if your camera button is depressed since i had the similar problem. In my case i had to disassembly the phone in order to fix it. Right after fixing the button it worked fine
Click to expand...
Click to collapse
in my case, the camera button is not pressed in... i truly don't know what to do hopeless? mhm?
greets!
budy!
hello Syzzer
I have the same problem, but i make a soft reset and it works.
Camera but + Com Button + Power
Wait until message appear.
You Get the message : For Hard reset press send
If you choose other key the system boots normaly.
I had already tried all your suggestions, but nothing seemed to work.
About a month ago I bought a Trinity. In the mean while, I forgot I had put my S200 in my bag and carried it around for a month. When I found it a week ago and started pressing random buttons, it suddenly booted and has been working ever since! The problem has gone as mysterious as it came. I can only imagine there was some hardware failure / dirt in my device that caused the trouble and is now gone / moved to some place it does not do harm. Because I already bought a Trinity, I gave the S200 to my brother. He's been using it ever since and did not have any problems. So keep your head up, there's hope!
I m also having the same problem
Now I am having the same problem, no button is pressed, and I can not install the NVID ROM
Actually I can install only a few ROMs, the NVID ROM was working before on my Neo perfectly but, I think it can be because I have changed many ROMs, from a month, actually I have tried different WM6 ROMs and I used NVID ROMs mostly for Step 1.
Now when I install any ROM, it shows a msg some nbf one after 80% or 95%
It can install the pdaviet first step ROM, but now the problem is that it hangs very much and it can not start Wifi, it has stopped working, a few more ROMs i have tried, but the WIFI is completely stopped.
When I press it in communication manager, it will show busy icon for a few seconds and will not start it in end.(I tried it in both WM5 and WM6, same problem, I also tried after soft reset and hard reset, the problem is still there)
Please someone help me out.
The problem appeared today morning, while listening music using tcmp. the sound stopped suddenly, and standard animated cursor appeared over tcmp screen. i closed tcmp, and the rest of the system seemed fine, i was able to mute the phone and entered my work place. After a while i noticed the screen is off and i can not turn it on using pwr button, although green led kept blinking so the phone was operating. after a soft reset it would not go over splash screen showing IPL, SPL (which are: IPL: 1.06, SPL 1.06, GSM: 01.12.10, OS 1.6.2.4).
I've tried multiple times and still the same, only difference is that sometimes I can see the cursor and sometimes not. I can get to rgb screen and "press send to restore" as well, but that's it. I can't remember whether previously pressing a key illuminated a screen and keys, but now it doesn't. I used to have problems with screen not going black on idle since few days, but that's it. What could have happened? And if the only solution is hard reset, please tell me, could I somehow backup my contacts now? I don't have activesync here so I have to wait till I finish my work to find out..
please help anyone...
rom version : 1.6.2.4 WWE,
date : 11/15/05
radio : 01.12.10
protocol : 4.0.13.23
extrom : 1.6.2.105
That's spooky. My MDA has the same versions of IPL, SPL, GSM and OS, and this morning started misbehaving.
What's this rgb screen you can get to with the "press send to restore" option?
How do I do a hard reset (I have a backup on SD) without being able to get to the Start>Settings>System>Clear storage control panel option?
Rgb screen is a bootloader which i enter by holding cam+voicedial+commmanager butons while softreseting wizard. the other screen i mentioned i enter holding cam and voice buttons, and then pres reset. that screen says 'pres send to restore factory defaults any other key to quit' and it does hard reset if you press green button here...
my problem seems to be over for now, i managed to turn the phone on while i plugged it into a wall charger (believe me, the battery was not a problem - i don't know for how long it's ok now, but at least i made contacts backup now so that i'm ok with a hard reste if i have to...
You both have old roms and could do with upgrading them to aku2 roms. (your device will be more stable) i.e. the first number of the rom will be 2. Please dont ask me to go through how to flash a rom because there are hundreds of posts on the same topic and read the wiki - shortcut top left of the screen. You need to identify whether your device is g3 or g4 but i suspect you both have g3 chips.
Now read & read esp the wizard upgrading forum and wiki and then when you feel confident - flash your device.
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
banannq said:
mu chipset is g3 based on my ipl/spl info... i wouldn't dare to ask anyone to explain the process of flashing, i'm not that crazy. only thing i'd dare, would be to advice me what rom should i use... or a way to determine this, since i know it can't be just any rom...
Click to expand...
Click to collapse
Looking at your rom numbers i gather you have a t-mobile vario - is it uk or usa rom or polish - i see you live in poland.
there latest uk rom is here ftp://[email protected]/Wi...Prodigy_2210206_109_21911_TMO_UK_WWE_Ship.exe
us rom ftp://[email protected]/Wizard/Roms/Tmobile/RUU_Prodigy_2170702_217_20710_TMO_US.exe
user name xda password xda
Its prob best you sim unlock and cid unlock before you flash in case you change to a non-tmobile rom inc one of the cooked roms.
see here http://forum.xda-developers.com/showthread.php?t=249474
and read dr puttingham's tutorial http://forum.xda-developers.com/showthread.php?t=285435
and now i have given you more than enough hints
p.s. by the way remember to write down your gprs settings and mms settings to use with your new rom.
thats right, its tmobile vario, uk one. it is sim unlocked, i'm not sure about cid but it should not be a problem. thanks for the hints, it really seems more then enough;] i'll probably have to use theese, as soon i have a spare evening...
you don't have to explain me the importance of gprs settings - forcing my wiz to work in uk's o2, then in polish plusgsm, then loosing settings and doing it again finally got me into a habbit of backing every settings up ;]
and last but not least, guys, yesterday i did my first HR ;] ...
I seldom activate MrTrueVGA. But tonight I did that for reading one PDF.
It leads me to hard reset the device right after a soft reset.
But the nightmare is ---
after hard reset, I press ACTION key to restore factory default as suggested. It takes few seconds to finish the default restore. Then I was asked to press POWER KEY to boot.
the device doesn't boot at all. just go back to the previous screen: 'Press ACTION to restore factory default or press Camera Key to exit'
If I press Camera Key, it just simply refresh the screen.
Seems the AMEO has entered an endless loop...
I have to try resetting the device in different way...
Now I mange to get the a dark screen as well as the ACTION key with Green light on.
any idea what mode is it (green light)?
Seems the OS couldn't startup after restoring factory setting. I guess I have to put the origin ROM back to the device instead of the updated WM6.
Continues tomorrow...
I've used it on my Athena with WM6 without a problem. Maybe something else is going on.
Is that an official release of WM6 for your device? I have no problem with MvRTrueVGA what so ever....
Have you tried flashing your device again?
I got my Ameo into a very similar loop. I took the battery out for a few minutes, then when re-inserted, I was able to "see" the Ameo from Sync Centre and re-flash the ROM...
Monocube SafeMode2 saved my butt various time with truevga..
the WM6 is download from here (t mobile version). I am looking for a way to flash back origin version.
BTW, other softwares I run after starup: USB mousr driver, WM5storage.
Sounds like the OS got killed. reflash the device
Thanks Olipro, I am a bit regret that if I had run your hard-SPL, probably i wouldn't experienced this problem.
The symptom do like OS got kill for some reason. I am wondering anyone had tried to hard reset after flashing WM6 ROM?
more update will come...
update:
reflashing ROM image solves the problem.
but i still believe MrTrueVGA caused the problem. Somehow it causes the conflict and blow up the OS.
I use MvRTrueVGA on WM5 and WM6 on my Ameo without problems.
(only smaller graphical bugs)
even changing the resolution never took me more than one soft reset
forget to mention, i use another software "scree orientation" at the same time.
maybe these two chaps don't work well together.
Hi
I have a problem with Keyboard htc snap s521.After jtag operation few keys have changed their position and the Trackball is not function when I pres on him left and right it ok.
Please help me.
Any Ideas???
Welcome to forums
Have you tried a hard reset?
Or perhaps try removing the app that caused this and start from there
Hope it helps
I don't know which application has caused this. This problem has appeared after restoring the boot zone and installin wm 6.5.I have also installed wm 6.1 but I'm facing the same problem.
Now I see something strange.I entered in bootloader and tell me Mapl100 but under battery is Mapl110.It is a connection whit my prloblem?And the phone is now S520 not S521.
How to change S520 to S521?