Hello all,
I use samsung i780 as modem (HSDPA) to connect to the Internet. I created a bridged connection (LAN connection from mobile + LAN Xbox) and everything seems ok, but when I try to connect to xbox live the errors comes out: MTU Speed too slow, it required at least 1392. So I downloaded SKTool and I changed the MTU on my i780 - from 0 to 1500 MTU - and then I soft reseted the mobile, but xbox continues giving me same error! any suggestion please?!
Thanks
Mario
Related
i got usb wlan adapter. it's ip is 192.168.1.130.
the lan adapter in my pc has 192.168.1.84 ip.
all computers on my local wired network has 192.168.1.* addresses and 255.255.255.0 subnet.
i fixed the IP of SD sandisk wifi adapter on my mda compact to 192.168.1.131.
Usb adapter is in peer-to-peer (ad-hoc) mode and i normaly connect with ppc to it. i got 80-100% signal all the time.
the problem/question #1: why i cant ping from ppc to PC ? firewall turned off.
#2 - if i could ping it, would i be able to ping all the other ip's on my wired network?
#3 - if i could be able to ping all of those computers, how should i set-up a workgroup on ppc and be able to map network drives through wlan link?
#4 - if i would be able to map the drive over wifi link, would i be able to add mine 20.000 mp3s to the pocketmusic's playlist and play them wirelessly?
thanks in advance!
And when i ping from PPC - i see on pc that "received" packets are raising -
ie. now it shows 12 packets received, when i run ping on ppc to pc, the
number increases to 16 (4 pings!) but all are time-outed....
And if the IP on both sides are set to "automaticly", they got assigned
169.254.*.* IP's. Then the ping goes through correctly but i can't still
access the network. The network bridge between LAN and WLAN connection only
made things worser, making my internet connection unusuable (DSL through the
same LAN connection) so i deleted the bridge. Now - ping is going but i
still cant map my pc's drive.... what could be the problem...
Same problem
Dakky,
I have the exact same problem. I bought a Netgear WG111 Wireless USB dongle. I created an ad-hoc network, connected to it but can't connect to the internet or browse my shared. On my desktop the sent packet go up but not the recieved.
Are we both being stupid, can't you connect your PPC to your PC using an ad-hoc network? I have now tried to connect with two different desktops to my XDA and a friends XDA IIs running WM5 to my desktop but had no success. I can connect to an access point and browse file/internet no problem.
I have an XDA EXEC and run XP Pro on desktop.
I've got similar problem. I have Linksys Wireless-G usb network adapter, i assign same class IP adresses (192.168.2.1, 192.168.2.2, mask 255.255.255.0) the wifi connects in ad-hoc modebut how can sync over wifi ?, if I am able to sync over wify i will be able to use my pc's internet connection wich is a lot faster than any gprs/edge
I don't think you can network in this way - basically you have a bunch of clients but no 'server' I think you need a wireless hub (with Internet connection in there somewhere) in there somewhere.
If you do a search on microsoft web site ther is some info about using a PC as an internet share for other PCs but you have to use a very specific IP address rnge for this and set the share PC up in a certain way
Hello to everybody
i own a Trinity (i love it!) upgraded to wm6 (shadowmite rom) and radio 1.46.00.11.
i am desperately trying to connect via wifi to my home network to use my flat adsl, but i have no success.
Besides i also have a Blue Angel with WM2003 (i still love it..) and i dont have any problems at all with it to access my network/internet thru wifi!
I am using a wifi router/modem (zyxel prestige 660 hw) with Adsl2+ and italian provider liberomini 4mb
my PC is winXP MCE sp2 and its connected to the router with ethernet cable
I have set up both PDA's exactly the same way:
-wifi card :connects to 'my work'
-IP address: assigned by server
-authenticationpen
-data encryption : disabled
-connections/advanced/networks: both set to 'wy work'
-proxy settings: internet connection enabled / proxy server disabled
on the router i disabled all protections/firewall/encryption/passowrd/etc.
dhcp is enabled both on the router and the PC
both PDA's connect to the Zyxel router and show very with good signal strenght.
the router recognizes the signal of both pda's and displays correct mac-address and ip address of both
BUT,
THE BLUE ANGEL CAN BROWSE THE WEB USING TE WIFI/ADSL CONNECTION AND CAN ACCESS MY PC DIRECTORIES/RESOURCES, WHILST THE TRINITY DOES NOT!
it cannot locate webpages and does not connect to network.
i tried all possible combinations of wlan/wifi/connection settings, but no way!
Am i doing something wrong? is there any special setting to be done with wm6?
i dont believe the fault is in shadowmite's rom as even before flashing to this fantastic rom i had tried once with wm5 and had same problem (though i did not dig too much in it)
Can anybody help me?
Check if you are using a proxy in your gsm settings. If it is so, use someting like Advanced Settings or Trinityhacks or something ele to disable the proxy during wi-fi connections.
Ciao
wm6+wm2003+ router wifi
thks yr reply claros.
i checked my gsm settings (you mean my ISP connection settings?) and there is not mention of proxy server in there
i only found proxy server option in MY Work connection settings and it is disabled.
all settings are exactly same as on the blue angel which is working fine...
do you know if this is a common problem with wm6?
any suggestion how to proceed?
found solution!!!!!
eureka
i found the solution in this thread:
http://forum.xda-developers.com/showthread.php?t=315982
its very easy! just go to wlan power tab and move the horizontal slide fully to the left (best performance)
magically my triniry now is connecting to internet via wifi!
great!
ps: still cannot access myh pc directories but i guess i will solve by installing Resco explorer
thanks
Hey, i have a problem with wifi ... its already showing that its connected to wifi router.. but the internet not working i had this problem from weeks ! .. till now cant find the way to fix it ! ... what do u think ? is there any apps can let the wifi work perfectly with internet ? .. or is there anyway to get back the internet ? .. i dunno its just showing that already connected to my wirless but no net ...
msTx.
This problem can not be answered with the information you gave us, for the problem might well be the network you attempt to connect to. If for some reason your router only allows local access, you will be able to connect, without being able to reach the internet.
First try disabling all security on your router (including mac-filter!) and attempt a connection. If it doesn't fly from there, give us some more info. (What kind of router, phone firmware etc.)
well, i will check my router settings and check the security... and i will give u the answer l8r ... anyway thx
i checked everything .. and my laptop works perfect with wifi 100% ! , but my xperia still doesnt work and also i restarted my router .. so here's the information about my router ..
It's Linksys router .
Network Mode: Mixed
Network Name (SSID): Linksys Router
Radio Band: 40 MHz Channel
Wide Channel: 9
Standard Channel: GHz 11 - 2.462 GHz
Wireless SSID Broadcast: Enabled
______________________________________
Security Mode : WPA2-Personal
Encryption: TKIP or AES
Pre-Shared Key: ******* (wireless password)
Key Renewal: 3600 Seconds
I dont want to Disable Security mode .. coz everyone will join my wireless and make more pressure and slow my net.
_______________________________________
MAC Filter is DISABLED
_______________________________________
AP Isolation : Disabled
Authentication Type: Auto
Basic Rate: Default
Transmission Rate: Auto
N Transmission Rate: Auto
CTS Protection Mode: Disabled
Beacon Interval: 100
DTIM Interval: 1
Fragmentation Threshold: 2346
RTS Threshold: 2346
________________________________________
Check them if anything wroung .. and thx
From the looks of it, your settings aren't "flawed" (to any extent you can speak of flawed anyway).
I meant disabling the security as a temporary test. If disabling allows you to connect, the problem lies there.
Also something that might help is changing the channel you're on.
If that doesn't help, update your router's firmware.
Finally, try connecting to another network with your X1, if that does work, the problem lies in compatibility (most often resolved with firmware updates for your router).
mstx while you are at it also test the following:
1. are the proxy settings on the phone correct? normally they should be empty
2. can you connect fine with the phone from activesync from the laptop
3. are your ip settings correct? some networks requires them to be static (you manually set the correct ip, subnet,gateway) instead of dynamic (from the dhcp server)?
4. when you connect to the wifi network it should ask you to select internet or work. select internet.
Heeey , i fixed it !.. now its work perfect !! ... well, the problem was in the xperia my wifi connection setting, the wifi setting was "connect to WORK" .. so I changed it "connect to THE INTERNET" .. and it works ...
anyway thanks guys !!
i think the problem come from here
Pre-Shared Key: ******* (wireless password)
try using a wep key instead
i think that wireless passxord doesn't work well on windows mobile
Hello. I testing TOUCH2 with router B/G/N forced for N connection only.
After edited this key:
HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms:11nModeDisable = 0
and rebooted, with forcing router to use only N wireless standard, my Notebook not connect because wlan card is B/G but Touch2 work fine and show for speed tx/rx auto/auto. I have already test navigation and youtube video and work fine.
fabcal said:
Hello. I testing TOUCH2 with router B/G/N forced for N connection only.
After edited this key:
HKEY_LOCAL_MACHINE\Comm\BCMSDDHD1\Parms:11nModeDisable = 0
and rebooted, with forcing router to use only N wireless standard, my Notebook not connect because wlan card is B/G but Touch2 work fine and show for speed tx/rx auto/auto. I have already test navigation and youtube video and work fine.
Click to expand...
Click to collapse
so you mean its technically possible to access N connections? anyone else tried and confirmed already?
Hi guys,
I spend the last nights on figuring out how to get USB Reverse Tethering running.
My success story setup:
- Router: Normal Internet Router with Ethernet and Wifi
- Phone: LG Optimus G E975 (original ROM !!!, rooted)
- PC: Win 7
Network configuration from top (=WWW) to bottom (=Android Phone):
[WAN Line 1]: Connecting external network (internet) to my router
...[Device 1]: Router; connecting external network (x.x.x.x) to internal network (10.0.0.x, subnet 255.255.255.0)
......[Eth. Line 2]: LAN connection from Router [IP: 10.0.0.138] to PC [IP: 10.0.0.1]
.........[Device 2]: PC running Win 7 - Create a bridge (instruction see below - this is the master trick !)
............ [USB/Eth. Line 3]: Connecting PC with Phone in USB Tethering mode
............... [Device 3]: Android Phone [config: IP: 10.0.0.101, default gateway: 10.0.0.138, DNS1: 10.0.0.138]
Creating a bridge on PC Win 7:
Basic situation on the PC would be such as:
- if you connect PC to Router - this is Physical Ethernet Port with IP let's say 10.0.0.1/24 => network 1: 10.0.0.x
- if you connect Phone to PC - this is RNDIS (USB) Ethernet Port with IP let's say 192.168.42.129/24 => network 2: 192.168.42.x
- if you know want to get from network 1 (Phone to PC) to network 2 (PC to Router and to Internet) the PC must do a routing function - if not - the whole thing will fail.
Pretty Easy Solution to overcome routing problem/risk:
- Create a bridge between Physical Ethernet Port and RNDIS Ethernet Port
- How to: Mark both adapters (Physical Eth. and UBS Eth.) => right click => "German: Verbindung überbrücken" (engl.: Bridge connection or similar)
- Now the PC melts both, the Physical Eth. Port and the USB-Eth.-Port to only 1 Ethernet Port! (configure IP: 10.0.0.1)
This means:
- We can work with only 1 network, PC has no router function, Android Phone can directly ping Router because now it is in the same network 10.0.0.x
- Router's IP 10.0.0.138/24 => works as gateway and DNS1 for all devices in network 10.0.0.x
- PC's bridge Eth. port IP 10.0.0.1/24, configure default gateway and DNS1 => 10.0.0.138 (Router)
- Phone's IP 10.0.0.101/24, configure default gateway and DNS1 => 10.0.0.138 (Router)
Test it:
- ping PC on 10.0.0.1
- ping Router on 10.0.0.138 (if that works you can already open a bottle of vine )
- ping IP from external network (internet): e.g. xda-developers.com-Server-IP
- ping a domain if address resolution (DNS-server) works: e.g. www.xda-developers.com
If all that works - enjoy USB Reverse Tethering on your Android phone.
Many Apps don't work without Wifi ...
=> for that install Xposed Framework + Xposed Fake Wifi Connection
=> this makes an App believe Wifi is connected
enjoy
------------------------------------------------------------------------------------------
Now comes the BUT:
- This works fine with LG-phone + original ROM + root!
- This DOES NOT work with LG-phone + Cyanogen Mod 10.2 ROM + root!
I even found the problem why it fails but I can't solve it:
[Using Original ROM]:
- From LG-Phone I can ping PC or Router or external IP immediately after setup (PC, Router, Internet-IP)
[Using CM 10.2 ROM]:
- From LG-Phone I cannot ping PC, I cannot ping Router - all devices are in the same network!
- If I know give a 1st ping from another device, e.g. PC => LG-Phone - then I can also ping back from LG-Phone
- It seems as LG-Phone can only ping 'back' once it has received a ping from another device - why that?
- The reason can be found in the ARP-table - which lists IP-address to physical MAC-address of network device:
normal entry should look like: 10.0.0.1 (PC) 02:93:5f:2c:92:34 (=> ping is possible to this device)
incomplete entry looks like: 10.0.0.138 (Router) ..................................... (=> ping not possible, because of missing mac-address)
- If I now manually create an ARP-entry such as:
busybox arp -s 10.0.0.138 02.03:7f:92:12:33
then the thing works for this device! - I can successfully ping and have connection
- Summary: If LG-phone gets a ping from another network device - the LG-Phone collects the MAC-address - and after that the ARP-entry is OK - then LG-Phone can ping the device back and reach it via Ethernet
The problem now is:
- I cannot mantain the ARP table for all IP-addresses on the whole world
- and: I cannot wait to get a ping from any other device in the world - until I can communicate back
Does anybody have an idea what goes wrong here?
Is it a security related problem?
Or is it rather a network-problem (ARP resolution) caused by CM 10.2 ROM?
Best from Vienna
RoseQuartz
Why I need USB Reverse Tethering?
I am Electro-Hyper-Sensitive; cannot use phones, WIFI, etc. etc. - stupid thing - I know
RoseQuartz said:
Hi guys,
I spend the last nights on figuring out how to get USB Reverse Tethering running.
My success story setup:
- Router: Normal Internet Router with Ethernet and Wifi
- Phone: LG Optimus G E975 (original ROM !!!, rooted)
- PC: Win 7
Network configuration from top (=WWW) to bottom (=Android Phone):
[WAN Line 1]: Connecting external network (internet) to my router
...[Device 1]: Router; connecting external network (x.x.x.x) to internal network (10.0.0.x, subnet 255.255.255.0)
......[Eth. Line 2]: LAN connection from Router [IP: 10.0.0.138] to PC [IP: 10.0.0.1]
.........[Device 2]: PC running Win 7 - Create a bridge (instruction see below - this is the master trick !)
............ [USB/Eth. Line 3]: Connecting PC with Phone in USB Tethering mode
............... [Device 3]: Android Phone [config: IP: 10.0.0.101, default gateway: 10.0.0.138, DNS1: 10.0.0.138]
Creating a bridge on PC Win 7:
Basic situation on the PC would be such as:
- if you connect PC to Router - this is Physical Ethernet Port with IP let's say 10.0.0.1/24 => network 1: 10.0.0.x
- if you connect Phone to PC - this is RNDIS (USB) Ethernet Port with IP let's say 192.168.42.129/24 => network 2: 192.168.42.x
- if you know want to get from network 1 (Phone to PC) to network 2 (PC to Router and to Internet) the PC must do a routing function - if not - the whole thing will fail.
Pretty Easy Solution to overcome routing problem/risk:
- Create a bridge between Physical Ethernet Port and RNDIS Ethernet Port
- How to: Mark both adapters (Physical Eth. and UBS Eth.) => right click => "German: Verbindung überbrücken" (engl.: Bridge connection or similar)
- Now the PC melts both, the Physical Eth. Port and the USB-Eth.-Port to only 1 Ethernet Port! (configure IP: 10.0.0.1)
This means:
- We can work with only 1 network, PC has no router function, Android Phone can directly ping Router because now it is in the same network 10.0.0.x
- Router's IP 10.0.0.138/24 => works as gateway and DNS1 for all devices in network 10.0.0.x
- PC's bridge Eth. port IP 10.0.0.1/24, configure default gateway and DNS1 => 10.0.0.138 (Router)
- Phone's IP 10.0.0.101/24, configure default gateway and DNS1 => 10.0.0.138 (Router)
Test it:
- ping PC on 10.0.0.1
- ping Router on 10.0.0.138 (if that works you can already open a bottle of vine )
- ping IP from external network (internet): e.g. xda-developers.com-Server-IP
- ping a domain if address resolution (DNS-server) works: e.g. www.xda-developers.com
If all that works - enjoy USB Reverse Tethering on your Android phone.
Many Apps don't work without Wifi ...
=> for that install Xposed Framework + Xposed Fake Wifi Connection
=> this makes an App believe Wifi is connected
enjoy
------------------------------------------------------------------------------------------
Now comes the BUT:
- This works fine with LG-phone + original ROM + root!
- This DOES NOT work with LG-phone + Cyanogen Mod 10.2 ROM + root!
I even found the problem why it fails but I can't solve it:
[Using Original ROM]:
- From LG-Phone I can ping PC or Router or external IP immediately after setup (PC, Router, Internet-IP)
[Using CM 10.2 ROM]:
- From LG-Phone I cannot ping PC, I cannot ping Router - all devices are in the same network!
- If I know give a 1st ping from another device, e.g. PC => LG-Phone - then I can also ping back from LG-Phone
- It seems as LG-Phone can only ping 'back' once it has received a ping from another device - why that?
- The reason can be found in the ARP-table - which lists IP-address to physical MAC-address of network device:
normal entry should look like: 10.0.0.1 (PC) 02:93:5f:2c:92:34 (=> ping is possible to this device)
incomplete entry looks like: 10.0.0.138 (Router) ..................................... (=> ping not possible, because of missing mac-address)
- If I now manually create an ARP-entry such as:
busybox arp -s 10.0.0.138 02.03:7f:92:12:33
then the thing works for this device! - I can successfully ping and have connection
- Summary: If LG-phone gets a ping from another network device - the LG-Phone collects the MAC-address - and after that the ARP-entry is OK - then LG-Phone can ping the device back and reach it via Ethernet
The problem now is:
- I cannot mantain the ARP table for all IP-addresses on the whole world
- and: I cannot wait to get a ping from any other device in the world - until I can communicate back
Does anybody have an idea what goes wrong here?
Is it a security related problem?
Or is it rather a network-problem (ARP resolution) caused by CM 10.2 ROM?
Best from Vienna
RoseQuartz
Why I need USB Reverse Tethering?
I am Electro-Hyper-Sensitive; cannot use phones, WIFI, etc. etc. - stupid thing - I know
Click to expand...
Click to collapse
I am also sensitive to EMF. I want to connect my android phone to a router using usb. This is a little different from what you have posted here, but could you tell me how to set up reverse tethering on the phone? Can I enter commands on terminal emulator to activate reverse tethering? Is there anything I have to do with the router, or just plug in the usb data cable? The other question is, if I am connecting a usb modem to the router, can I use a usb hub to connect both the modem and the phone to the single usb port on the router? Will this work? There are very few android devices which have usb ethernet drivers hence I can't use that option.