Hi Guys,
I had some issues with P3452(Elfin) and gave it to repair centre to fix it. They told me that it has some issues with main board and needs replacement. They replaced it and gave it back to me working. Now i just noticed that instead of putting 3452's mainboard , they have installed P3450's board. Evrything else like ROM etc is still same as orginal... ..So i wanted to know the real diff between 3452's board and 3450's board???? What diff can i expect ?? Any suggestions please .?
Related
For a bit time ago i accidently broke my lcd display on my hd2, and because htc could not fix this cheap i decided to try myselvf.
first i ordered a lcd and a new digitizer and soldered them together and fixed everything just like in the video and the lcd started to work, but now my touch pad does'n work! I can't do anything
Then i took the screen out and ordered a new one from ebay which was assembled from the shop.
And same resault
what could be the problem? I have a danish hd2 and i have tried to update the firmware after i replaced the screen and digitizer and still no respond
what could be the problem?
hey, did u fix the digitizer yet. i had a similar problem. the volume buttons got stuck in and i decided to open it and fix it. right after closing it back the digitizer stopped functioning...............please let me know asap if u managed to fix urs and how u did it thanks
Same problem here
I've got the exact same problem. Replaced LCD and digitizer but it is still not working. Additionally the screen is a little yellowish. Anyone knows if this might be related and any idea who to possibly fix this?
Hi, I have exactly the same problems, even tried with 2 fresh new digitizers. Could it be that they are extremely sensitive on the inside? Or is it some glitch somewhere?
Extremely frustrating!
Sent from my HTC HD2 using XDA App
well mine is in the scrapped now. when my digitizer arrives and i sort things out i will get back to you
Hi, I bought HD2 with broken digitizer, so after it came to me I immediately buy new digitizer, didn't look for the cheapert but once again I resolve myself to never buy things for china digitizer doesn't work so I need to new one from USA, send it to my friend and he repair it within day, now everything work... and yes digitizer are very sensitive
Hey guys just wondering if there is anybody in Melbourne or Australia or anywhere for that matter that may have a old broken HD2 (preferably T9193) that i might be able to use for spares ?? I currently have one and have dropped it and now it's colours are up the sh*t i have done a screen and digitizer replacement and without any luck the problem still persists any ideas would also be greatly appreciated
Ps. if i twist the phone in oposite directions the problem goes away which leads me to believe that something has come away from the board itself i have looked and cant see a thing any suggestion would be greatly appreciated
Maybe mainboard connector, have you tried applying pressure to connector socket/ribbon with it stripped but screen, mainboard rigged up with battery & bench test it while applying pressure to mainboard connector/ribbon with insulated/earthed tool.
maybe abble to fix it if can find out exact point of problem but most HD2 faults need replacement parts to cure faults long term ...
hi guys
please help me.i hope its some solution for my problem
i got ripped off little power button bit on the logic board and wondering if is any
chance to stick it back with any tape or anything ( solder) .no idea
also is this essential to fix in terms of not working lcd .
basically my phone is working fine but since this bit is ripped off my phone lcd doest not light
Im new in there so please i got some photos byt cant upload yet.
can anybody help me with it?>
You'll probably have a lot of trouble getting that back on, are you rooted?
youll have to replace the entire main flex cable the power button is attached to.
http://www.ebay.com/itm/HTC-Desire-G7-Google-Nexus-One-Main-LCD-Board-Flex-Cable-Ribbon-Repair-Part-USA-/320813342861?pt=LH_DefaultDomain_0&hash=item4ab1f7208d
I buy alot of parts from this seller, and that is the part you need
Hello everyone, im just so damn happy with my droid pro with CM7.. its just sweet... buuuuuuuuut........
Well my sifi signal is too low, i dont know what is this, i have tested in everyway that its not a software malfunction or anything firmware related, so today i went to my local repair guys, and they tried to put an extention on the antenna ( or so they told me).. but it didnt helped.. after that they told me that one module in the mainboard that boosts the signal may be damaged and that they couldnt change it cause the part isnt sold as a spare part.
What can i do, please im begging you i dont want to get rid of the phone just cause of this..
Any suggestions?
Oh and before anyone tells me to send it to motorola.. well they told me they dont take care of this device anymore, and if they do they would have to change the whole mainboard and that costs the same as the phone itself.
PLEASE HELP....
Was it poor before changing to CM7? If it is a component issue, there's nothing you can do about it short of replacing the mainboard (maybe get a used Pro on eBay, they're around $30-40). My Pro has pretty poor WiFi performance relative to my other devices (laptops/KFHD).
Hey guys, I hope you can help me with this:
I cracket the screen on my Lg G2 (D802), so i bought a new screen to fix it. Screen is working fine, but now it got (almost) no service I opened it several times already to check all connectors, antenna cables and so on but can't figure out the problem... Has anyone had similar issues and knows how to fix this?
Thank you very much!
hi. i Have that same prob. after lcd replace... no service - try wipe and fresh instal rom - form me it's working .