Related
Hi all
i've installed destinator pn on my XDA2 with wm5(v.1.50g.00WWE) without problems, but when i go to programs, there is no icon for Destinator. in the folder "destinatorApps" only appear this .exe: "preloader". Pressing it, any response.
any help? tomorrow i'll go to Rom and i need the navigator
regards from Spain
Same problem here!
Installation of Destinator
Hello,
After installing Destinator version 5.1.65, I found in the Destinatorapps directory, a directory for each map I choose and another directory called Destinator where I found a Destinator.exe.
To make a shortcut I use Total Commander, which is an excellent freeware.
Compañero, explora por el cd y verás algo asi como "instalacion manual" copia essas carpetas y pegalas en el directorio del pda destinator apps... voilá....
dear friends: i have had the same problem and i've resolved copying from DPN CD to the PDA a folder called "manual" or so (i don't remember exactly..)
Regards
Okay,
I have a common problem for Shift owners, though lord knows why it happened to begin with, but SnapVue is gone and my audio will not work...which pretty much kills the main function of my Shift to me (traveling media player)....I NEED AUDIO UGH
Now, I have done several things in order to resolve my issue:
The first was a complete reformatting and reinstallation of Vista using the recovery partition....I did this whole proccess to no avail as the audio was still completely gone.
Then, I stumbled upon these forums. And read various fixes...
I ultimately decided to follow these instructions:
http://www.pocketables.net/2008/05/how-to-hard-res.html
The instructions involved ECshift.exe and mtty_0513_test.exe....yet, mid proccess after running the latter application, USB was not on option as a comm port.
I have tried to disconnect the battery, I HAVE TRIED everything...
does anyone have any ideas for me to fix my shift?
I really want my audio, my wifi, my 3g....gahhh
Please help me...
Thanks a million dollars and plus some in advanced!
The instructions you have followed are correct, if you don't see the USB option in mtty (special mtty version working with vista), that's either because:
a) your SnapVUE is not in bootloader mode (try ecshift.exe -bl a few more times)
or
b) you have not disabled Windows Mobile Device Center (make sure "Allow usb connections" is UNCHECKED).
Once snapvue is up and running, you'll have audio again.
Thanks for the quick reply...
It still doesnt work...I am left with the same thing, no USB option in the mtty...
http://i33.tinypic.com/544nq.jpg
theres a screenshot for your reference, just to see if I am doing anything wrong...
Thanks for your quick reply...
any more suggestions?
I might just RMA the shift, but im nto sure how complicated that will be as it wasnt purchased in the USA...
your screenshot looks OK..
please try: ecshift.exe -gm
does it report 0 or 1 ? let me know.
but snapvue might be totally dead...
ultraman982 said:
does anyone have any ideas for me to fix my shift?
I really want my audio, my wifi, my 3g....gahhh
Click to expand...
Click to collapse
sorry, one last question, why did you include wifi in this list?
Hello,
Sorry for the late response....
Thanks for the responses!
I tried "ecshift.exe -gm"
I get "current SnapVue mode is: 0"
Also, I included wifi on the list because my wifi does not function...only LAN functions....
I think what cmonex mean is that wifi is not supposed to be dependend on snapvue side. So it should be working. Otherwise it is fried, or you have made an interesting discovery.
thaihugo said:
I think what cmonex mean is that wifi is not supposed to be dependend on snapvue side. So it should be working. Otherwise it is fried, or you have made an interesting discovery.
Click to expand...
Click to collapse
you are right, this is what I was aiming at with my question.
ultraman982 said:
Hello,
Sorry for the late response....
Thanks for the responses!
I tried "ecshift.exe -gm"
I get "current SnapVue mode is: 0"
Also, I included wifi on the list because my wifi does not function...only LAN functions....
Click to expand...
Click to collapse
what's up with your wifi? will it turn on at all?
as for -gm report, not good at all, not good. but please confirm the following so we are on the same page: am I right and this is reported AFTER -bl option says it successfully entered bootloader?
cmonex said:
your screenshot looks OK..
please try: ecshift.exe -gm
does it report 0 or 1 ? let me know.
but snapvue might be totally dead...
Click to expand...
Click to collapse
I tried modify the registry to try to fix 128 dpi problem, after reboot the snapVUE display a blank white screen with some RGB data on the lower right conner.
I followed the instruction to try to hard reset WM6, likewise, I can't find the USB port.
"ecshift.exe -bl" successfully entered the bootloader!
I tried "ecshift.exe -gm"
I get "current SnapVue mode is: 1"
downloaded hotfix "clear snapVue" but "time out" displayed!
will take to htc care center if I can't fix it myself.
cmonex said:
what's up with your wifi? will it turn on at all?
as for -gm report, not good at all, not good. but please confirm the following so we are on the same page: am I right and this is reported AFTER -bl option says it successfully entered bootloader?
Click to expand...
Click to collapse
Hmm, that's very random indeed; whilst trying what you said about doing it after the -bl option (which I had not done before)...I got ta different result:
it was a 1 and not a 0
Thanks once again
Oh, and as for my wifi...Windows Vista simply detects no wifi hardware installed?
Or atleast that's what it says...
And I looked, but I cant find any Shift drivers for vista. I tried the wifi driver for XP to no avail...it just makes no sense seing as I reformatted and everything...
Ciao,
ho un grosso problema, non leggo i file cab e ink per passare a wm6, ho provato a scaricare i file da Modaco e da questo forum ma non riesco a leggerli. Inoltre, quando cerco di copiare stratmenu in settings mi compare la scritta che non è possibile copiare il file i. explorer. Perchè?
C'è qualcuno che può inviarmi i file all'indirizzo:[email protected]
Grazie
Hallo,
I have a great problem, I don't read the file ink and cab to use WM6, I tried to load the file by MoDaCo and by this forum, but I receive files that I don't read.
Then, I try to copy startmenu in settings, but the file i.explorer in not copied. Why?
There is somebody that can send me these files to my mail:[email protected]
Thanks
szjohnwong said:
I tried modify the registry to try to fix 128 dpi problem, after reboot the snapVUE display a blank white screen with some RGB data on the lower right conner.
I followed the instruction to try to hard reset WM6, likewise, I can't find the USB port.
"ecshift.exe -bl" successfully entered the bootloader!
I tried "ecshift.exe -gm"
I get "current SnapVue mode is: 1"
downloaded hotfix "clear snapVue" but "time out" displayed!
will take to htc care center if I can't fix it myself.
Click to expand...
Click to collapse
please don't be so upset. no need to take this back to HTC for such a small issue (don't misunderstand "small", I know it is scary looking). this is easy to fix. bet you didn't disable USB connection in WMDC.
so please do that. then mtty will see the USB port.
PS: HTC's clear snapvue thing won't work when WM can't boot properly. don't worry about that either
ultraman982 said:
Hmm, that's very random indeed; whilst trying what you said about doing it after the -bl option (which I had not done before)...I got ta different result:
it was a 1 and not a 0
Thanks once again
Click to expand...
Click to collapse
no, it is not random at all. bet you typed -gm first without -bl.
anyway, if you are totally sure you did the USB disabling right, this might be hardware issue
as for the wifi, that's weird.
tatanni said:
Ciao,
ho un grosso problema, non leggo i file cab e ink per passare a wm6, ho provato a scaricare i file da Modaco e da questo forum ma non riesco a leggerli. Inoltre, quando cerco di copiare stratmenu in settings mi compare la scritta che non è possibile copiare il file i. explorer. Perchè?
C'è qualcuno che può inviarmi i file all'indirizzo:[email protected]
Grazie
Hallo,
I have a great problem, I don't read the file ink and cab to use WM6, I tried to load the file by MoDaCo and by this forum, but I receive files that I don't read.
Then, I try to copy startmenu in settings, but the file i.explorer in not copied. Why?
There is somebody that can send me these files to my mail:[email protected]
Thanks
Click to expand...
Click to collapse
can you describe this a bit better? also could you open a different thread for this.
cmonex said:
please don't be so upset. no need to take this back to HTC for such a small issue (don't misunderstand "small", I know it is scary looking). this is easy to fix. bet you didn't disable USB connection in WMDC.
so please do that. then mtty will see the USB port.
PS: HTC's clear snapvue thing won't work when WM can't boot properly. don't worry about that either
Click to expand...
Click to collapse
thanks for the reply, pof also has a reply on the other thread, I have tried unchecked the box in the Mobile control center's [allow usb connection], still cannot find the USB port.
The shift was sent to htc care center yesterday.
szjohnwong said:
thanks for the reply, pof also has a reply on the other thread, I have tried unchecked the box in the Mobile control center's [allow usb connection], still cannot find the USB port.
The shift was sent to htc care center yesterday.
Click to expand...
Click to collapse
heh, if any other HTC device was sent back to service center to get it hard reset, that'd be weird, eh.
after unchecking that box, you have to reopen mtty. maybe battery removal also helps. but I guess it is too late now. hope they won't charge you for the fix.
cmonex said:
heh, if any other HTC device was sent back to service center to get it hard reset, that'd be weird, eh.
after unchecking that box, you have to reopen mtty. maybe battery removal also helps. but I guess it is too late now. hope they won't charge you for the fix.
Click to expand...
Click to collapse
thanks for the reply again. I did reopen the mtty but still fail.
I told htc care center that the WM6 hang up! I can't connect to internet via 3G.
My concern is how to avoid the same problem. It caused by modifying the registry, because when I expand WM6 to 128 dpi, my on screen keyboard lost. However, the default is Chinese, I can't type any character. The only way is waiting for the cook ROM!
szjohnwong said:
thanks for the reply again. I did reopen the mtty but still fail.
I told htc care center that the WM6 hang up! I can't connect to internet via 3G.
My concern is how to avoid the same problem. It caused by modifying the registry, because when I expand WM6 to 128 dpi, my on screen keyboard lost. However, the default is Chinese, I can't type any character. The only way is waiting for the cook ROM!
Click to expand...
Click to collapse
I dont see a problem... if the USB really didn't work = hardware problem
for me and for most people, mtty works fine with non booting WM
another way could have been (if you had waited) running the RUU and see if it can flash an OS on it (the process also hard resets it)
Recover your iPAQ 91x with HP's ROM Update Tool on Windows XP/Vista/7
Hi guys,
I have just bricked my iPAQ 914c while mistakenly installing Manila BETA 0.5c whis is for 614c.
Here is another thread about recovering but since I am on Windows 7, my system gave BSOD while trying this method.
P.S. Driver files were 10 years old, from 1999
Forget it....
Her is the new and if you ask me, the perfect, easy and the secure way:
1- Download the latest official ROM from HP:
ftp://ftp.hp.com/pub/softpaq/sp43001-43500/sp43434.exe New ROM!
2- Don't install it, extract is using WinRAR, 7Zip..
3- Inside the sp43434 folder you will find a file called "hpRUU.exe". Right click>Properties>Compatiblity Mode>Windows XP SP3>Apply>OK, again Right click "Run as Administrator"
4- Accept the agreement and click "Next", the software will look for iPAQ 914c state....
5- Connect the USB Cable (Device is turned off)
6- Now press Volume UP (Left side) + OK (Right Side) + Power Button
7- Device will Boot up in RUU Mode since it is connected to PC via USB Cable. During boot up while hpRUU.exe is looking for device stage, it will find your device and ask you to update.
8- Press "Update" and the process will begin. After flashing all the parts, which takes about 5-10 Minutes, your device will be up and working...
Note: Somehow if the update process gives the Code 402 USB connection error, close the hpRUU.exe and then open the "Configure.ini" file. Inside that file edit the TIMEOUT value to "1000". After that start the procedure form the beginning.
The rest is up to you
That's it. Thank you for reading.
Special thanks to sergious for creating Manila BETA 0.5c ROM for 614c. Without his ROM I couldn't brick my 914c and you were not going to get this tut.
Recep Baltaş
thanks
Would that works on Windows Vista ?
You took my ROM from 614c and flashed it on 914c?? hehe lol
BTW thanks for tutorial
sergiorus said:
You took my ROM from 614c and flashed it on 914c?? hehe lol
BTW thanks for tutorial
Click to expand...
Click to collapse
OMG was it for 614c? I mean i am not kidding, seriously I thought it was for 914c
Nevertheless we have a new guide.
bangelius said:
Would that works on Windows Vista ?
Click to expand...
Click to collapse
Dude, it worked on Windows 7 Build 7077 Why not in Vista?
Added new workaround for the Code 402 USB Connection error and replaced the HP ROM Update link with the new one.
i want to ask about the last HP update for iPAQ 910 the sp43434.exe ..
when i try to flash with the binary file it says mine not compatible with the update.. so i tried to flash with SD boot load .. but it just make things worse, my ipaq is bricked.. so i wanted to go back to BJ's motherloads rom thru SDbootloader but no success..
after i read http://forum.xda-developers.com/showthread.php?t=459123
i finally got out from boot screen..
i haven't try to download image of sp43434.exe into my ipaq using DNW.. is there's any chance?
or should i wait ROM author to adding the update into his/hers latest ROM?
what with sp43434.exe update? is it major update?
and why my ipaq is not compatible? (mine is FB051AA#UUF)
AbsolutBenz said:
i want to ask about the last HP update for iPAQ 910 the sp43434.exe ..
when i try to flash with the binary file it says mine not compatible with the update.. so i tried to flash with SD boot load .. but it just make things worse, my ipaq is bricked.. so i wanted to go back to BJ's motherloads rom thru SDbootloader but no success..
after i read http://forum.xda-developers.com/showthread.php?t=459123
i finally got out from boot screen..
i haven't try to download image of sp43434.exe into my ipaq using DNW.. is there's any chance?
or should i wait ROM author to adding the update into his/hers latest ROM?
what with sp43434.exe update? is it major update?
and why my ipaq is not compatible? (mine is FB051AA#UUF)
Click to expand...
Click to collapse
First of all i have no idea about DNW. But the sp43434.exe is not a major update...and it is not for your ipaq. Anyway....never mind...install WM 6.5
cool_recep said:
First of all i have no idea about DNW. But the sp43434.exe is not a major update...and it is not for your ipaq. Anyway....never mind...install WM 6.5
Click to expand...
Click to collapse
Or try this one:
http://forum.xda-developers.com/showpost.php?p=3646163&postcount=1
Updating Hp 914c
Hi guys,
i ve tried to update my ipaq many times( more than 15) on vista and windows 7. i did everyting hec editor, nf0 files etc..
then i tried smthng else, just installed xp one of my laptop and active sync as well. plugged ipaq to laptop and it recognized it (it was in ruu mode)
i started hp update sp43... what ever.. and it was success.
this is best way believe be
thx for the help. now my 914 works again
awesome instructions...worked like a charm. I also goofed and flashed a 614c rom to my 910c...you saved my hp - thanks!
You are welcome... And bump since Windows 7 is more and more popular
Hi.
I had issues after installing the ROM from HP. I did the SD loader method which did not work. But I still mnaged to get out from the RUU mode by pressing camera+volume up.
I tried your method. Still did not work. Now I am stuck ni RUU mode. Tried getting out of the RUU mode to try other mthods but this time I can't get out of RUU. Uhmm.. any known solutions?
Cheers!
Sorry Pal. Switched to Android
hola buenas noches necesito un favor por accidente instale el rom del wm6.5 del 914 en un hp ipaq 610c como recupero el telefono realizando un flasheo original borrando rastros del sistema operativo, ademas el sdloader esta bloqueado me sale error update file pls check y no me permite formatiarlo por aqui, cuando inicia el wm6.5 la pantalla aparece titilando demasiado rapido y no permite calibrar la pantalla, alguien conoce un programa que me reconosca el celular y me permita formatiarlo de cero. thanks
Finally
It worked perfectly, I only had to change the timeout in Config.ini to 9999 because 1000 wasn't enough. Thanks for your post, I think I love you now.
ciao a tutti.
ho un problema con activesync.
quando collego l'hd2 via usb al pc, sul pc si visualizza la cartella dove è installato. Prima si apriva solo la finestra di connessione. come faccio per tornare alla configurazione di prima.
grazie
Hello everyone.
I have a problem with activesync.
when I connect with USB cable the hd2 to my PC, the PC displays the folder where i installed it. First opened only the connection window. how do I return to the configuration before.
thanks
sgabu said:
ciao a tutti.
ho un problema con activesync.
quando collego l'hd2 via usb al pc, sul pc si visualizza la cartella dove è installato. Prima si apriva solo la finestra di connessione. come faccio per tornare alla configurazione di prima.
grazie
Hello everyone.
I have a problem with activesync.
when I connect with USB cable the hd2 to my PC, the PC displays the folder where i installed it. First opened only the connection window. how do I return to the configuration before.
thanks
Click to expand...
Click to collapse
Where you installed what? The phone on the PC or some program on the phone? When you first connect the phone it should come up and ask you if you want it to active sync or be a storage device. There is also a check box for remember my choice. Could you have set it to be a storage device and then told it to not bug you about it?
whe i connect the leo, i choose activesync connection in the phone and in the pc screen appear a my document folder.
anyone can help me.. please
This folder is created when you first set up activesync. If you place any documents, etc, into this folder on the pc, when you perform a sync, they will be transferred to your HTC.
HTH
Hi XDA fellows
I'm facing an issue with my car headunit's firmware and I explain:
When the unit starts up fro cold, everything works fine (meaning USB ports) but, if the unit go to sleep (AAC off) and wake up (AAC on) the the usb does not work anymore until I restart the unit.
This is annoying as behaviour, I'd like to get clues from you people on how to make a workaround for this.
I can uncompress the firmware, have acces to all files in RW etc... but I don"t really know how adroid reacts on AAC on, what service it start (or restart) from what scripts ?, is there a way to do a workaround ? with a C script ?, a shell script ?
How to resstart the USB host (or internal hub) programmatically ?
Thanks for yous helps in advance !
I don't have an answer for you, however, I'm curious, did you try to unplug and plug USB device? Does it happen with different devices, what USB device is this? HU sellers heavily advertise USB ADAS cameras, therefore I would think that USB should have been pretty well tested and reliable.
Hello, I struggle with the same issue with my OKNAVI TS10 6+128 that I bought about 1 month ago. Did you find any solution to this? It drives me mad. I got everything up to date when it comes to firmware and MCU drivers. The seller just can't understand what the problem is.
hello! did you solve the problem? I have a similar problem but it does not recognize the usb directly, I have tried the connections and they are correct because the power reaches them but when I connect a flash drive it does nothing, I have seen that in other "ts" model radios they can configure and enable or disable the host ports from the configuration menu but in the ts10 I can't find this option, I've tried to reset the factory settings and it doesn't fix it, and my last option would be to reinstall the operating system but if I do it and the usb still doesn't work I would be worse than how I am now, does anyone know where the option to turn on/off the hosts in usb is located?
Hola buenas a todos yo tengo el mismo problema y tampoco sé cómo solucionarlo si alguien nos pudiera ayudar se lo agradecería.
Un saludo
edu767 said:
hello! did you solve the problem? I have a similar problem but it does not recognize the usb directly, I have tried the connections and they are correct because the power reaches them but when I connect a flash drive it does nothing, I have seen that in other "ts" model radios they can configure and enable or disable the host ports from the configuration menu but in the ts10 I can't find this option, I've tried to reset the factory settings and it doesn't fix it, and my last option would be to reinstall the operating system but if I do it and the usb still doesn't work I would be worse than how I am now, does anyone know where the option to turn on/off the hosts in usb is located?
Click to expand...
Click to collapse
hello did you solve the problem? i have this problem usb port have power but not recognize usb. have solution?
sergente78 said:
hello did you solve the problem? i have this problem usb port have power but not recognize usb. have solution?
Click to expand...
Click to collapse
No, I did everything, I put the developer mode, I changed the host of the usb, I put them in 1.1 I made a thousand configurations and resets, I even bought two new cables and nothing, I ended up sending it to the Chinese and they fixed it for me, they had to update it because I had several problems (the wifi did not connect automatically) And when they returned it to me everything was perfect and they sent me another set of cables, I tried the old cables and they worked, but I put the new ones because instead of 2 USB inputs came 3, it's a nuisance and I also went to update, I don't update it again, I'm not kidding
No, hice de todo, puse el developer mode, cambié el host de de los usb, los puse en 1.1 hice mil configuraciones y reseteaos, incluso compré dos cables nuevos y nada, termine mandándosela al chino y me la arreglaron, debieron actualizármela por que tenía varios problemas (el wifi no se me conectaba automáticamente) y cuando me la devolvieron iba todo perfecto y me mandaron aparte otro juego de cables, probé los cables antiguos y funcionaron, pero les puse los nuevos por que en lugar de 2 entradas usb venían 3, es un fastidio y a mi también me paso por actualizar, no la vuelvo a actualizar ni de broma