Hi all
i've installed destinator pn on my XDA2 with wm5(v.1.50g.00WWE) without problems, but when i go to programs, there is no icon for Destinator. in the folder "destinatorApps" only appear this .exe: "preloader". Pressing it, any response.
any help? tomorrow i'll go to Rom and i need the navigator
regards from Spain
Same problem here!
Installation of Destinator
Hello,
After installing Destinator version 5.1.65, I found in the Destinatorapps directory, a directory for each map I choose and another directory called Destinator where I found a Destinator.exe.
To make a shortcut I use Total Commander, which is an excellent freeware.
Compañero, explora por el cd y verás algo asi como "instalacion manual" copia essas carpetas y pegalas en el directorio del pda destinator apps... voilá....
dear friends: i have had the same problem and i've resolved copying from DPN CD to the PDA a folder called "manual" or so (i don't remember exactly..)
Regards
Recover your iPAQ 91x with HP's ROM Update Tool on Windows XP/Vista/7
Hi guys,
I have just bricked my iPAQ 914c while mistakenly installing Manila BETA 0.5c whis is for 614c.
Here is another thread about recovering but since I am on Windows 7, my system gave BSOD while trying this method.
P.S. Driver files were 10 years old, from 1999
Forget it....
Her is the new and if you ask me, the perfect, easy and the secure way:
1- Download the latest official ROM from HP:
ftp://ftp.hp.com/pub/softpaq/sp43001-43500/sp43434.exe New ROM!
2- Don't install it, extract is using WinRAR, 7Zip..
3- Inside the sp43434 folder you will find a file called "hpRUU.exe". Right click>Properties>Compatiblity Mode>Windows XP SP3>Apply>OK, again Right click "Run as Administrator"
4- Accept the agreement and click "Next", the software will look for iPAQ 914c state....
5- Connect the USB Cable (Device is turned off)
6- Now press Volume UP (Left side) + OK (Right Side) + Power Button
7- Device will Boot up in RUU Mode since it is connected to PC via USB Cable. During boot up while hpRUU.exe is looking for device stage, it will find your device and ask you to update.
8- Press "Update" and the process will begin. After flashing all the parts, which takes about 5-10 Minutes, your device will be up and working...
Note: Somehow if the update process gives the Code 402 USB connection error, close the hpRUU.exe and then open the "Configure.ini" file. Inside that file edit the TIMEOUT value to "1000". After that start the procedure form the beginning.
The rest is up to you
That's it. Thank you for reading.
Special thanks to sergious for creating Manila BETA 0.5c ROM for 614c. Without his ROM I couldn't brick my 914c and you were not going to get this tut.
Recep Baltaş
thanks
Would that works on Windows Vista ?
You took my ROM from 614c and flashed it on 914c?? hehe lol
BTW thanks for tutorial
sergiorus said:
You took my ROM from 614c and flashed it on 914c?? hehe lol
BTW thanks for tutorial
Click to expand...
Click to collapse
OMG was it for 614c? I mean i am not kidding, seriously I thought it was for 914c
Nevertheless we have a new guide.
bangelius said:
Would that works on Windows Vista ?
Click to expand...
Click to collapse
Dude, it worked on Windows 7 Build 7077 Why not in Vista?
Added new workaround for the Code 402 USB Connection error and replaced the HP ROM Update link with the new one.
i want to ask about the last HP update for iPAQ 910 the sp43434.exe ..
when i try to flash with the binary file it says mine not compatible with the update.. so i tried to flash with SD boot load .. but it just make things worse, my ipaq is bricked.. so i wanted to go back to BJ's motherloads rom thru SDbootloader but no success..
after i read http://forum.xda-developers.com/showthread.php?t=459123
i finally got out from boot screen..
i haven't try to download image of sp43434.exe into my ipaq using DNW.. is there's any chance?
or should i wait ROM author to adding the update into his/hers latest ROM?
what with sp43434.exe update? is it major update?
and why my ipaq is not compatible? (mine is FB051AA#UUF)
AbsolutBenz said:
i want to ask about the last HP update for iPAQ 910 the sp43434.exe ..
when i try to flash with the binary file it says mine not compatible with the update.. so i tried to flash with SD boot load .. but it just make things worse, my ipaq is bricked.. so i wanted to go back to BJ's motherloads rom thru SDbootloader but no success..
after i read http://forum.xda-developers.com/showthread.php?t=459123
i finally got out from boot screen..
i haven't try to download image of sp43434.exe into my ipaq using DNW.. is there's any chance?
or should i wait ROM author to adding the update into his/hers latest ROM?
what with sp43434.exe update? is it major update?
and why my ipaq is not compatible? (mine is FB051AA#UUF)
Click to expand...
Click to collapse
First of all i have no idea about DNW. But the sp43434.exe is not a major update...and it is not for your ipaq. Anyway....never mind...install WM 6.5
cool_recep said:
First of all i have no idea about DNW. But the sp43434.exe is not a major update...and it is not for your ipaq. Anyway....never mind...install WM 6.5
Click to expand...
Click to collapse
Or try this one:
http://forum.xda-developers.com/showpost.php?p=3646163&postcount=1
Updating Hp 914c
Hi guys,
i ve tried to update my ipaq many times( more than 15) on vista and windows 7. i did everyting hec editor, nf0 files etc..
then i tried smthng else, just installed xp one of my laptop and active sync as well. plugged ipaq to laptop and it recognized it (it was in ruu mode)
i started hp update sp43... what ever.. and it was success.
this is best way believe be
thx for the help. now my 914 works again
awesome instructions...worked like a charm. I also goofed and flashed a 614c rom to my 910c...you saved my hp - thanks!
You are welcome... And bump since Windows 7 is more and more popular
Hi.
I had issues after installing the ROM from HP. I did the SD loader method which did not work. But I still mnaged to get out from the RUU mode by pressing camera+volume up.
I tried your method. Still did not work. Now I am stuck ni RUU mode. Tried getting out of the RUU mode to try other mthods but this time I can't get out of RUU. Uhmm.. any known solutions?
Cheers!
Sorry Pal. Switched to Android
hola buenas noches necesito un favor por accidente instale el rom del wm6.5 del 914 en un hp ipaq 610c como recupero el telefono realizando un flasheo original borrando rastros del sistema operativo, ademas el sdloader esta bloqueado me sale error update file pls check y no me permite formatiarlo por aqui, cuando inicia el wm6.5 la pantalla aparece titilando demasiado rapido y no permite calibrar la pantalla, alguien conoce un programa que me reconosca el celular y me permita formatiarlo de cero. thanks
Finally
It worked perfectly, I only had to change the timeout in Config.ini to 9999 because 1000 wasn't enough. Thanks for your post, I think I love you now.
ciao a tutti.
ho un problema con activesync.
quando collego l'hd2 via usb al pc, sul pc si visualizza la cartella dove è installato. Prima si apriva solo la finestra di connessione. come faccio per tornare alla configurazione di prima.
grazie
Hello everyone.
I have a problem with activesync.
when I connect with USB cable the hd2 to my PC, the PC displays the folder where i installed it. First opened only the connection window. how do I return to the configuration before.
thanks
sgabu said:
ciao a tutti.
ho un problema con activesync.
quando collego l'hd2 via usb al pc, sul pc si visualizza la cartella dove è installato. Prima si apriva solo la finestra di connessione. come faccio per tornare alla configurazione di prima.
grazie
Hello everyone.
I have a problem with activesync.
when I connect with USB cable the hd2 to my PC, the PC displays the folder where i installed it. First opened only the connection window. how do I return to the configuration before.
thanks
Click to expand...
Click to collapse
Where you installed what? The phone on the PC or some program on the phone? When you first connect the phone it should come up and ask you if you want it to active sync or be a storage device. There is also a check box for remember my choice. Could you have set it to be a storage device and then told it to not bug you about it?
whe i connect the leo, i choose activesync connection in the phone and in the pc screen appear a my document folder.
anyone can help me.. please
This folder is created when you first set up activesync. If you place any documents, etc, into this folder on the pc, when you perform a sync, they will be transferred to your HTC.
HTH
Hello,
I'm using the XBmod WP7 instalation, and had my wifi network configured on the phone.
Now, the other day I turned the wifi on and nothing, the phone wouldn't connect.
I went to the list of available wifi networks and the network wasn't there!?
I also deleted the saved configuration of the wifi network in the phone, and still nothing....
Also did a reboot to the wifi router, and still nothing....
Anyone had this problem before???
mOrrI said:
Hello,
I'm using the XBmod WP7 instalation, and had my wifi network configured on the phone.
Now, the other day I turned the wifi on and nothing, the phone wouldn't connect.
I went to the list of available wifi networks and the network wasn't there!?
I also deleted the saved configuration of the wifi network in the phone, and still nothing....
Also did a reboot to the wifi router, and still nothing....
Anyone had this problem before???
Click to expand...
Click to collapse
Sim muito povo mesmo.
Há vários tópicos sobre o assunto e sem solução.
Engraçado, eu quando faço reset ao reuter... a rede é detectada no meu HTC HD2... mas não é solução.
Hi all
i have P9 lite and every time i connect it with PC over USB i Have to go to sittings >>developer options>> select usb configuration>MTP
every time i have to do that
how can i make it auto
ashrafkhalaf said:
Hi all
i have P9 lite and every time i connect it with PC over USB i Have to go to sittings >>developer options>> select usb configuration>MTP
every time i have to do that
how can i make it auto
Click to expand...
Click to collapse
Strange. I don't have that problem..
Sérieusement ? Moi j'ai exactement ce même problème et je ne trouve nul part comment le régler.
Seriously ? I have exactly that same problem and find nowhere how to fix it