Lock Touchscreen. Loudspeaker? - Palm Treo Pro

There's this option on my treo pro, that if enabled, will lock the touchscreen while I'm in a call. That stops me from enabling the loudspeaker by pressing the button on the screen.
Is there a way to enable the loudspeaker while in a call, without using the touchscreen?
Thanks.

Of course there is. While in a call and while the screen is locked, use the D-pad (Palm button) to navigate to the soft key of the speaker. Then confirm with the center button. With the D-pad, you can control all the softkeys while in call.

That sounds right I'll give it a try on the next call. Thanks

Related

software to lock keys during call?

Is there a software that will lock my keys and buttons including the ones on the side during a call? I'm always inadvertently hitting or pressing some button during a call.
Just press the power button to turn the display off which in turns locks the keys. you have to press the power button again to turn the display back on
thanks but i'm not looking to turn the phone OFF, i need to not have the buttons active during a phone call when the phone is ON.
I oftentimes accidentally press some button or another when I get a phone call. When I used to have a Treo 700wx there was a feature to lock all buttons during a phonecall. I'm looking for that functionality here as well.
I also had a Treo, but I don't find the need for the key lock anymore on my XV6800. I don't think I've ever accidentally pushed a button during a call.

how to disable the 4 keys during a call? or atleast the send key?

hi
almost every call i make, it hapend to be on hold in the middle of the call, i found out, that this hapens, when i speak thru my bt headset, and the device stays, in side the case, so even the screen is dark, the send key is pressed suddenly.
i need a solution how to lock this key during a call.
thanks.
up up up up

muting :-(

Hi Guys,
this issue has been driving me slightly mad, tried searching with no luck, hopefully someone can help.
basically when i get an incoming call a) the flip phone over does not mute call, b) pressing the mute button on the incoming call screen does not work.
Now this used to work, and i have no idea what changed to cause it to stop.
i have checked the following :
regsitry - FaceDownMuteRing set to 1
HD Tweak tool - mute call is enabled
S2u2 - i have all phone settings off (callerID section set to off)
Now i do have AEbuttons installed which is probably the last thing i installed, on this i have mapped several buttons to the volume keys. Cant see this been an issue though.
Also, another issue which has developed is my backlight settings keep reverting back to timeout after 10 seconds everytime i reboot the device, could this be related.
any help will be much appriciated,
thanks
tas
taz2007 said:
Hi Guys,
this issue has been driving me slightly mad, tried searching with no luck, hopefully someone can help.
basically when i get an incoming call a) the flip phone over does not mute call, b) pressing the mute button on the incoming call screen does not work.
Now this used to work, and i have no idea what changed to cause it to stop.
i have checked the following :
regsitry - FaceDownMuteRing set to 1
HD Tweak tool - mute call is enabled
S2u2 - i have all phone settings off (callerID section set to off)
Now i do have AEbuttons installed which is probably the last thing i installed, on this i have mapped several buttons to the volume keys. Cant see this been an issue though.
Also, another issue which has developed is my backlight settings keep reverting back to timeout after 10 seconds everytime i reboot the device, could this be related.
any help will be much appriciated,
thanks
tas
Click to expand...
Click to collapse
Had the same problem. And exactly the same possible culprit. Thus, I decided to try restoring the volume keys to their default mappings in AEB, and alas, now the muting works when I press the mute button or face the phone down.
On the other hand, if you really need to map the volume buttons, I also discovered that while the mute button or facing the phone down would not mute the phone while it is ringing, pressing the volume down button will (assuming that it is not mapped in AEB).
Hope that helped!
vince_b said:
Had the same problem. And exactly the same possible culprit. Thus, I decided to try restoring the volume keys to their default mappings in AEB, and alas, now the muting works when I press the mute button or face the phone down.
On the other hand, if you really need to map the volume buttons, I also discovered that while the mute button or facing the phone down would not mute the phone while it is ringing, pressing the volume down button will (assuming that it is not mapped in AEB).
Hope that helped!
Click to expand...
Click to collapse
Hi Vince, nice one that was exactly the issue. Unmapped the buttons in AEB and it now all works..who would have thought. Now i have to decide what want the mute option or the mapped buttons
thanks
tas

Volume slide button broken

is there any way to mute the incoming calls? if my slide volume button is not working anymore?
a program or something that adds a MUTE button near the answer or something. please help
what ROM are you using? There should be a volume control on the screen somewhere.

Pressing volume buttons shall not turn on screen during calls

Hi,
I often have my Touch HD in my jeans during phone calls, either using a headset or the earplugs. Sometimes, the volume buttons are accidentally hit which may lead to unintended hangups etc.
Is there any way, to prevent the touch screen from going on when pressing the volume buttons during phone calls?
Thank you.

Categories

Resources