hey everyone. long time forum lurker, few time poster :/
i have the XV6800 Titan, unlocked and running DCD 4.1.2 currently with Cricket services working in full. From the MicroSD i am running the recent Android release through the Haret.exe software
Cricket WAP requires a proxy server configured for Android to use WAP. i'd like to access the phone from Linux/Windows through telnet or USB in order to configure the sqlite3 proxy and enable WAP on my phone, however the device only charges and does not appear to be mountable or as a serial device in either Gentoo Linux or Windows XP
has anyone had luck with accessing Android from USB? does anyone have a local (from the phone) method of configuring the WAP proxy? perhaps a simple command line option i can run from the phone?
thank you everyone, in advance
FYI the Cricket WAP network i am shooting for is 172.28.178.197 (Portland, OR area) on port 8080 requiring a login ('[email protected]', password 'cricket')
i have tried the this from the terminal (Message key on top left of Titan) only to receive a 'Web page not available' error
Cricket network does receive an IP in Togga, but seems not to hit the proxy
ok, tethering is a no go apparently. that should be fine since there is a Terminal Emulator in Android under Development Tools. i can su to root and run sqlite3 from there without the need to use the Android SDK (adb shell)... or so i believe
i am not trying to configure the Cricket proxy server via sqlite3 as explained here
still no luck so far (i get 'SQL error: not an error' ), but i FEEL like i am getting closer!
Related
I just purchased a MyTouch 3g (32b) off of eBay. I have been using tmobile sidekick prepaid on an iPhone 2g. I used the APN: internet2.voicestream.com. This also worked on my htc dash. I've read on the boards this doesn't work because tmobile blocks total internet plan (internet2) on the MyTouch. If so, is there another apn i can use? (I do not want people telling me why to switch to android data or anything, just alternatives for now).
Also, if there is no way to get internet to work so I can login, if I find a way past the initial login, would my internet never work?
Problems with bypassing initial login:
adb shell "error: device not found" (haven't resolved)
rooting- Method 1. Can not get sd card cid to create a goldcard
Method 2. Can't bypass initial login to install flashrec
Any other possible ways to bypass initial login?
Thank you for any help in advance.
One way is being in range of Wifi when doing the setup.
I am in range to wifi, that is why I was trying to use adb shell to enable it, but it wasn't working. Is there another way to enable wifi?
When I run adb shell I get this:
* Daemon not running. Starting it now. *
* Daemon started successfully *
Error: device not found
The mytouch is on and and plugged into the computer. I've tried it on Windows 7, mac, and xp.
Problems are all almost fixed. I had a friend put in his sim card and we rooted, and flashed Super-E on the MyTouch. Everything works find except the internet.
If its not rooted and u dont have a data plan it will not let you pass the setup to enable wifi. you would have to use a friends sim with data and setup then use wifi. with being able to use interent on the sidekick plan is another story which i am corently trying my best to figure out.
Thats exactly what I did, so if you have any progress on getting the sidekick data to work, please post on the thread or PM me.
I've read and searched and Googled but I can't find an answer
I recently flashed my first Android NAND ROM: "CMYLXGOroms.Stock.Desire.HD.v1.1.4.1n.NAND.RMNET.NO-SQUASH-RAFPIGNA.1.7OC_CWM.zip".
Everything went smoothly and it all looks good except I cannot complete the Exchange ActiveSync account.
DETAILS:
1. I'm hosting my own Exchange server -2003
2. My SSL cert is self-generated from my own MS Cert Authority
3. I can view my OWA account via the native web browser w/o issue
4. My settings "appear" to be fine as I can reach the very end of the setup wizard. (If I change any of the ActiveSync account settings to an invalid option - say add an extra character to the server address - I receive an error when I click on "Next")
ISSUE:
1. On the last step of the setup wizard, when I click on "Finish setup" I receive the error:
"Failed to created the account. Please try again later."
QUESTIONS/THOUGHTS:
1. How to you import a SSL Cert in Android?
2. I've read about "Accept All SSL Certificates" dialog box you can check but I don't see one during the setup wizard - only the "This server requires an encrypted SSL connection". Is this a legacy setting or something that is hidden by HTC's SenseHD or? Is there anyway to access this option?
3. I've tried both checking and un-checking the "This server requires an encrypted SSL connection" - both give me the same failed result.
OTHER TROUBLESHOOTING:
1. I know this works as I've been successfully using Activesync with WinMo 6.1 & 6.5 on my wife's TouchPro2 and this works fine w/ the stock WinMo 6.5. So it's not a bad config on the back-end.
2. I tried installing Touchdown to see if that would work and I cannot get that to work either.
I'm getting really frustrated - any help would be GREATLY appreciated!
thnx
UPDATE:
I spent all day:
1. Creating a new DNS A record to point directly to my OWA server
2. Upgrading my SSL cert to an offical third-part cert from startssl.com (great service for free BTW)
3. Figuring out how to export/import/modify that cert to be installed on Android
I now have a nice DNS record that points to my OWA server (vs. the old DynDNS pointer) and I appreciate the SSL cert for free find, but I'm still ready to loose it over the lack of ActiveSync support.
Anybody have any idea if this is potentially a ROM issue and I should try another? Or is this a Froyo issue and I should try Gingerbread?
TIA
Hi all,
I was an iphone user because with jailbreak there is a openvpn package that allow me to connect via vpn ssl to my work and check internal mail.
Now i have move to android with sgs2 and i rooted it and follow a guide (sergiodeluz.wordpress.com/software/android/openvpn-ssltls-para-android-eclair-2-1-y-froyo-2-2) and installed busybox and openvpn installer and settings.
i deploy in sd the files crt ca key y ovpn and the phone ask my for credentials and connect sucessfully to my firewall. On firewall side i checked that the phone is connected and is ok.
BUT the phone cant ping any internal ip address and in my opinion is that is not able to create new routes or the tun iface.
so my question is how can i debug the problem because now i have more knowledge in Ios than in android.
Thanks
Hello Hello,
So am i am trying to FTP into my nexus player with no success.
1) download ssh server apk to NExus Player and set it up
- found ip address through network-->"my ssid"--> status info
2) via winscp typed in ip address from step 1 and port# from step 1 (when setting up the ssh server)
3) username: root password:abc123 (i found this from the firetv, but it could be the issue but i am not even getting an authentication error)
I just get a hang.. doesn't do anything, the connection times out. I Tried making a username and password via sshserver settings, but that didn't work either.
Am I using the wrong IP address? username? password? some help would be greatly appreciated ; >
johentie said:
Hello Hello,
So am i am trying to FTP into my nexus player with no success.
1) download ssh server apk to NExus Player and set it up
- found ip address through network-->"my ssid"--> status info
2) via winscp typed in ip address from step 1 and port# from step 1 (when setting up the ssh server)
3) username: root password:abc123 (i found this from the firetv, but it could be the issue but i am not even getting an authentication error)
I just get a hang.. doesn't do anything, the connection times out. I Tried making a username and password via sshserver settings, but that didn't work either.
Am I using the wrong IP address? username? password? some help would be greatly appreciated ; >
Click to expand...
Click to collapse
Don't FTP, SCP/SFTP. Research what you are doing / trying to do better, it seems you are on very thin ice.
Use username and password from SSH Server settings.
Also, you don't need to manually install it with sideload, you can just go to https://play.google.com from a browser and then use install and choose Nexus Player. Of course logged into the same Google account as the NP.
Does anyone know how to get a remote shell on NP? Since SSH Server can't produce a shell on x86 devices.
Also remote adb doesn't work on latest firmware AFAIK.
Edit: Created a separate thread about remote shell - http://forum.xda-developers.com/nexus-player/help/remote-console-nexus-player-how-adb-ssh-t3000595
Hello,
Recently i got root access to my modem Huawei HG532e using telnet and the "welcome to shell" string with help from one member of this forum, thank you for that i you are reading this
Now, checking all the things inside de modem's filesystem i found that in the curcfg.xml file in the modem is the CWMP TR-069 configuration to connect to the ACS server, the XML contains the URL cwmp.telmex.com and the username and password.
I had success changing the CWMP server for a fake one using a PERL script in my Kali virtual machine, i could get the Inform response from the CPE or the modem with some valuable information about the modem and system.
Now what i want is to connect to the real server using the credentials in the XML, i heard about some TR-069 Client implementations and Server ACS implementations but i had not success trying to connect to cwmp.telmex.com, i entered the credentials but when it loads i get an error saying that the servlet does not accept the GET method, and through POST i get nothing but a blank page.
Any ideas of what can i do to successfully connect to the ACS Server and weather it is going to be helpful to get some extra information, i mean, i heard about one 2wire modem that TELMEX used a few years ago that allowed access to a "secret" site/port to manage the modem remotely, i would like to know if it is possible to do the same for the HG532e modem that a i currently have