Hi all together,
After trying install "Resco Keyboard Pro" for my PPC (Qtek 9100), I get everytime, when I turn on my Pocket PC an error message:
"The file 'RKbdInit' cannot be opened
Click to expand...
Click to collapse
Now I deleted all Resco Keyboard folders, with intention to make disappear this
error message. Has anybody an idea how to solve this problem? My desire is not to get going the software.......I just want that my PPC doesn't hang after each start (because of the error message).
greetings,
reptile_05
Related
i've tried to install AIM... and a webcam program.. both of which install through active sync.. however everytime I try I get the following message on my phone...
"Installation of (whatever).CAB was unsuccessful." and that's about all I get.
Also whenever I connect the phone to my PC is says it's unable to successfully syncronize and asks me to reconnect the device.
MS's support site has been less than helpful... any help you all can give would be greatly appriciated....
Installation problems.....
I am having the same problem too.
Even after a hard reset when I try and install Sprite Backup & Agenda Fusion I keep getting the install error: 'cannot be installed, try another location'
It's driving me up the wall! I would have thought after a hard reset this wouldn't be an issue. I'm now the proud owner of an MDA Pro (Universal) that I can't use because the software I want to install won't install.
Can anyone help me please?
Hi,
Couple of things you might consider / try: -
Establish an activesync connection, then use the "explore" button, navigate to your staorage card, and manually copying the .cab file from your pc to the storage card.
Then on the treo go to file explorer, storage card, and run the cab from the card.
The other thing is to check that you're using activesync 4.1 or later - updates are a free download from MS.
Hope this helps
Angus
Thank you for your suggestions.
Unfortunately i've already tried copying the CAB files straight to the device and launching them produces exactly the same result.
I'm also already using Activesync 4.2 latest version.
Is there anything else I can try?
judging from your sig, you're using a pretty old rom version... I would definitly upgrade it and then give it another go...
I've recieved a QTEK9100 (HTC Wizard) from my employer. The ROM-version is 2.18.7.4 NOR.
This unit seems to be application locked in some way.
Among other things, I have tried to install two different sharewhare GPS-programs on this unit (PTGMAP and OZIExplorer). When installing or running the .exe files i get error messages like:
- "Cannot open the file PTGMAP. It either lacks a signed certificate or cannot find one of the components" (my translation).
- ".. can not be installed because it does not have a digitally signed certificate" (also my translation)
- or simply "cannot be installed"
I've searched this forum and quite a few others, but I have not been able to find a solution. I've found some .cab files, but these have been for other units that the QTEK 9100/HTC Wizard. I was even able to install this one, but it seems to have made no difference:
ftp://[email protected]/Universal/Extended_ROMs/Default_Signed_DisableSecurity.CAB
(I do realise this is for another unit)
I've also tried SignCode - It's says that the executable is certified, but I still get the same error message when I try to run the programe.
Finally, because my ROM has been configured (by an external supplier) with Pylon Anywhere for syncronization, I guess I can't install another ROM, as I will lose this software which I need.
Can anyone help me here? --- Please!?! ---
Try this reg tweak
Disable the security warning when installing non-certified application
To disable the security warning when installing a non-certfied application, set:
HKLM\Security\Policies\Policies\0000101a = 1 (DWORD decimal)
To restore the warnings:
HKLM\Security\Policies\Policies\0000101a = 0 (DWORD decimal)
Registry editor
but... I've tried to install the registry wizard:
http://forum.xda-developers.com/viewtopic.php?t=39725&highlight=registrywizard
But I get the same error-message "cannot install RegistryWizard_PPC_ARMV4.cab"..
Any ideas?
Copy this exe to your device via activesync and click on file through file explorer. It is a registry editor and go to those keys i described.
Still doesn't work
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Re: Still doesn't work
kloksa said:
I've tried this in every possible way now:
- I've copied the file to my "mobile unit" in windows explorer with ActiveSync running.
- I've put the file in the file-sync and synced.
- I've copied the file to my storage-card using a card-reader.
... Everytime I try to run the file, I still get the message "Cannot open regedit_463. It is either not signed with a signed certificate and so on..."
I am considering a ROm-update, but if I install a new ROM, I'll lose all the syncronization software from my employer, right?
Any futher help is greatly appreciated! Thanks!
Click to expand...
Click to collapse
Try the above file in main memory - take your storage card out and soft reset. Then click on the file again - sometimes it is a corrupt storage card that causes that error. Otherwise its some software thats caused this security error and you will need to hard reset or update rom. Yes you would have to reinstall all your software.
I've spent days and night trying to install a cab. file on my ppc without a succes now how a hell can I desable the certificate and signiture of this file.
thanks a lot for your help
You can try a program called certification off "Cert_SPCS.cab" it turns off the validation in WM5 (not sure if it works with later ROMs but worth trying)
Search for it.
Or go to: www.pdamagician.com/wm5software
I have already done it, still get the same message" installation was unsuccessful the program or seting cannot be installed because it does not have suffisient system permissions. Other solution will be highly apreciated, thanks anyway
Have a read of this thread, might help you !!
http://forum.xda-developers.com/archive/index.php/t-249863.html
The link here above did not help, thanks anyway. So again
is there any genius friend out there who knows how to unsigned cab, or disable signatures? 3 months waiting for a solution is too much.
Thankyou
Beny said:
The link here above did not help, thanks anyway. So again
is there any genius friend out there who knows how to unsigned cab, or disable signatures? 3 months waiting for a solution is too much.
Thankyou
Click to expand...
Click to collapse
Do you use a pocket pc device or a smartphone?
For pocket pc you can use my tool to turn off security.
So no prompt when you install or start an application with
no certificate.
Copy to device and start after some seconds a message box
is displayed with the result.
Houser
Houser said:
Do you use a pocket pc device or a smartphone?
For pocket pc you can use my tool to turn off security.
So no prompt when you install or start an application with
no certificate.
Copy to device and start after some seconds a message box
is displayed with the result.
Houser
Click to expand...
Click to collapse
Thanks Houser for your precious help, unfortunatly this did not work, I still get the same borring message concerning cab signature. What if we unpack the cab file, unsighned it and then repack it again. I wish I was a programmer!!
NB. The device is a pocket pc with WM 2006 onboard
Now lets get it strait, who can help me to re-build this bt patch for an Eten M700. This later can make the device compatible with a pioneer car headunit.
ThanksView attachment BT.ARM.CAB
Hi guys,
I don't know why when I close the IE or explorer everytime now. There's a error message pop up, and also a box pop up trying to open the IE or explore again.
What have I done wrong? or Did I install somthing in conflict?
eken said:
Hi guys,
I don't know why when I close the IE or explorer everytime now. There's a error message pop up, and also a box pop up trying to open the IE or explore again.
What have I done wrong? or Did I install somthing in conflict?
Click to expand...
Click to collapse
eken,
Please post the error message exactly to be able to help you further. The second popup is a Vista feature: when Vista detects that an application have stopped abnormally, it offers to troubleshoot or restart it.
hi i have problem with my b7610
i had hard reset and then i have problem with screen alignment
i download Remote Screen Alignment
and i putt skip button and i have this problem "An error occured trying to perform the operation"
then i read somthing other!
i rad to download MobileRegistryEditor then get in regystry and get in CalibrationData and put one other code and then
get in PPc windows file and delete welcome.exe!
i do all this in regystry but i can't delete welcome.exe file!
pleaz help me!