I'd like to toss this out for discussion. This might already exist, it might not.
Microsoft had system builders use a Disk Differencing technique to extract what exactly had changed after installing applications and customizations.
First, we'd install the OS and create a base image.
Second, we'd install the apps & customizations we wanted for our customers.
Third, we'd create another image. An app would then compare these two images and determine what files were added/changed and what registry additions, deletions, alterations were performed.
I'm hoping we can do the same for ROM upgrades.
1. OLD ROM - Base image.
2. Install apps and customizations - Image "Apps". This will give us our customizations.
3. Install new ROM - NEW base image created. Compare to OLD ROM base image to see what has changed (that we need to look out for that our APPs image might adversly change).
4. Apply Apps image to restore all customizations & applications.
Ideas anyone?
The theory sounds good.
Maybe buzz can comment?
The theory is very feasable, ive used similar building Win PE rescue disks, you have a app that gives you the base bootable image made from a Win XP install CD. then you add home made "modules" ie, your installed apps or networking capabilities etc. then it makes an image for you to use,
that cant really be that difficult to do the same for Win CE,
Ive also seen a M$ webcast thing where the guy took 45 mins to build an entire image for a win ce device,
so yer, it is very feasible that such dev apps exist, after all, they were made and then sold to the hardware vendors before ever being a rom image.
check in msdn for win ce 5 stuff, its a very intresting read, :shock:
it is a good idea, but only for linear ROMs, where each file has always it's own and same place in the rom and such rom is not compressed.
hmm...
but you can do partial rom upgrades with wm5 roms...
...and it would be possible to make registry diff + DOC Storage partition backup, where you actually install programs (so called \Device) and userdata.
buzz
buzz_lightyear said:
it is a good idea, but only for linear ROMs, where each file has always it's own and same place in the rom and such rom is not compressed.
hmm...
but you can do partial rom upgrades with wm5 roms...
...and it would be possible to make registry diff + DOC Storage partition backup, where you actually install programs (so called \Device) and userdata.
buzz
Click to expand...
Click to collapse
Ok...Since I'm not a programmer and somewhat of a noob with respect to WinCE, I am NOT constrained by what might be a logical limitation to a programmer or someone in the "know". So, below is my thinking ... outside of the box (er, PDA) style.
But first, I need to grasp further Buzz's post above about the locations of things in ROM. Does this mean that there isn't, for lack of a better example, a FAT for the ROM? That every individual thing is expected to be at some specific, static location that can't change? If so, I see your point. But that tells the system that this location is static? Also, doesn't that make bug fixes difficult as the fix might exceed the designated space in ROM? Or do bug fixes always get re-applied after each reset? Patching in memory is how I'm looking at this. (Remember, I'm a non-programmer...deal with me, please.) LOL
Ok..out of the box time.
1. Can a shim be used to capture calls to a certain location in the ROM and redirect to another location (within the ROM or even the storage card. Linux builds anyone?). Like what HD disk managers did to get around LBA limitations or even boot sector viruses did.
2. Can an emulator be used to simulate/backup/build/test the ROMs on a PC before wiping the PDA? Don't laugh, but if not, could something be done with Virtual PC? Oh..Ok, laugh.
(Should I go hide somewhere?)
Hello guys, i have been running Android on my hd2 for a few months now off the sd card and am becoming interested in flashing and also testing out windows phone 7. I do not want to attempt flashing though until i have a backup of my current windows mobile rom. How do i create a backup?
p.s.
i use gnu/linux; but can use a windows 7 virtual machine if i need windows.
SPB backup is my recomendation for good backups on WM, up to 6.5.x builds it has not let me down yet.
Make sure you have current ROM image to flash back to so you can install the backup you make back to it.
Good idea to use another sd card for WP7 or copy of it as WP7 does some odd stuff to SD cards Lol ...
As for your workstation OS not sure how successful W7 virtual machine will be, either resaerch further or wait for more replies.
Hi, thanks for your reply Mr B, i can't see why the virtual machine wouldn't be able to handle it; worse case scenario, i can use my girlfriends mac which has windows 7 on another partition. My data isn't real important to me as there's not much on there that's to hard to get back easily. I didn't explain my self well enough as i'm new to phone hacking and not quite up there with the jargon yet. After you're reply, i have caught on a tad more, and what i meant to ask was, how do i make a rom image?
In the sense you are thinking I think the answer is you can not.
It is possible to dump ROM using tools like romdump but this is just the raw ROM & not all your personal settings, apps ect ect.
Your best bet & closest I believe you will get to achieving your goal is finding & keeping installer for current used ROM & Radio & full SPB backup file, with these files you could return current device to this previous ROM & personal setup 100%.
If your current ROM is not easily available you could romdump & rebuild the dump to nbh installer file but that is not without some hassle unless you have some experience in this field.
Some ROMs come UC (user customization) tools pre-installed to configure your set-up for you at first boot, as long as you have used the tools to backup your setup, you can re-flash your ROM, let the UC run, and have everything set up 99% just as it was when backed up.
There's a bit of a learning curve to the UC way though, xml editing knowledge is a big plus with it, but once you get it figured out and all set up, UC is the most complete backup method available for WinMo.
Energy ROMs have UC already installed, alls you have to do is set it all up before flashing a new ROM. There's a few other UC ROMs, but Energy is the one that comes to mind, since it's the WM ROM I used before I switched to NAND Android
Thanks for your help guys, especially for even going through the effort of posting me a link, mr b. I just want to backup my rom though, how do i do this? i look at a overly complicated tutorial that covered several topics, and i also just tried finding the stock rom for my device but i just can't. So o can i just backup my current/stock rom
backing up current ROm by dumping ROm & then rebuilding is not that easy so best option is finding your current stock ROM & use SPB backup to image current setup of that ROM.
Post device model type & ROM you are looking for someone might have it or a link for it.
Hello;
Model No:
HTC HD2 T9193
ROM version:
1.72.841.0 (82124) WWE
I checked out them links you posted in my other thread i'd created, and one didn't work, and the other i'd found previously and there download link doesn't work.
I'm abandoning that thread as this one pretty much covers the exact same thing.
http://www.filesonic.com/file/19420...CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship.exe
Thanks mate. Ok so now i'm all set and satisfied to get flashing. Just a quick question; what kind of stuff does win phone 7 do to the sd card? that you mentioned earlier. Nothing a reformat can't fix?
http://forum.xda-developers.com/showthread.php?t=918170
WP7 in general has some quite stupid concepts & the handling of the SD card could only of only been considered a good idea by team Redmond.
★★★★[INFO]ANDROID ROM & How they Work★★★★
Parts of a ROM
i. The kernel.
Android (like many other Smartphone operating systems) runs on the Linux kernel. The Linux kernel was created in the early 1990’s by a gentleman named Linus Torvalds in Helsinki, Finland. It’s incredibly stable, incredibly friendly, and incredibly difficult for the layman to understand and modify. Thankfully it’s also very popular so it has been ported on to a multitude of hardware, including our Android devices.
Think of the kernel as an interface layer between the hardware and software on your device. The kernel decides when things happen, such as the LED indicator gets lit or when the soft button's LED gets lit. An application sends a request to the operating system to blink the LED. The operating system then sends the request to the kernel, which makes the light flash for the amount of time requested by the OS.
What sounds like a round-about way to get things done is also what makes the system so scalable and robust. Application developers only have to code in a way the operating system understands and the kernel makes it work on the hardware. This also keeps the application running in it’s own user-space and separate from the kernel. That means when you run the latest uber-cool app that wasn’t designed for your particular OS version, or is still very beta and it crashes, the kernel gives you the option to Force Close the application and the kernel can run untouched.
In a standard Android ROM (we will leave developer images and the like for another discussion) the kernel is bundled along with a set of instructions that tell the device how to load the kernel and the OS during boot. This is the boot.img that you see inside a zipped ROM that your not able to easily open. The device knows to extract this image to internal memory (the ramdisk) and follow a series of scripts (init scripts) to load the kernel and then the other portions of the OS. That’s what’s happening while you’re watching the boot animation. Interestingly enough this is done the same way for a PC, your smartphone, an Android tablet, or even a smart Linux powered toaster. If you’re feeling exceptionally geeky, plug your Android phone into the USB port on your PC and let the PC boot from the USB device. No, it doesn’t actually load, but you can watch the animation while it tries to match up the hardware support with what’s inside your PC. As I said, Linux is amazingly scalable and as a result so is Android.
What is a kernel? If you spend any time reading Android forums, blogs, how-to posts or online discussion you'll soon hear people talking about the kernel. A kernel isn't something unique to Android -- iOS and MacOS have one, Windows has one, BlackBerry's QNX has one, in fact all high level operating systems have one. The one we're interested in is Linux, as it's the one Android uses. Let's try to break down what it is and what it does.
Android devices use the Linux kernel, but it's not the exact same kernel other Linux-based operating systems use. There's a lot of Android specific code built in, and Google's Android kernel maintainers have their work cut out for them. OEMs have to contribute as well, because they need to develop hardware drivers for the parts they're using for the kernel version they're using. This is why it takes a while for independent Android developers and hackers to port new versions to older devices and get everything working. Drivers written to work with the Gingerbread kernel on a phone won't necessarily work with the Ice Cream Sandwich kernel. And that's important, because one of the kernel's main functions is to control the hardware. It's a whole lot of source code, with more options while building it than you can imagine, but in the end it's just the intermediary between the hardware and the software.
When software needs the hardware to do anything, it sends a request to the kernel. And when we say anything, we mean anything. From the brightness of the screen, to the volume level, to initiating a call through the radio, even what's drawn on the display is ultimately controlled by the kernel. For example -- when you tap the search button on your phone, you tell the software to open the search application. What happens is that you touched a certain point on the digitizer, which tells the software that you've touched the screen at those coordinates. The software knows that when that particular spot is touched, the search dialog is supposed to open. The kernel is what tells the digitizer to look (or listen, events are "listened" for) for touches, helps figure out where you touched, and tells the system you touched it. In turn, when the system receives a touch event at a specific point from the kernel (through the driver) it knows what to draw on your screen. Both the hardware and the software communicate both ways with the kernel, and that's how your phone knows when to do something. Input from one side is sent as output to the other, whether it's you playing Angry Birds, or connecting to your car's Bluetooth.
It sounds complicated, and it is. But it's also pretty standard computer logic -- there's an action of some sort generated for every event. Without the kernel to accept and send information, developers would have to write code for every single event for every single piece of hardware in your device. With the kernel, all they have to do is communicate with it through the Android system API's, and hardware developers only have to make the device hardware communicate with the kernel. The good thing is that you don't need to know exactly how or why the kernel does what it does, just understanding that it's the go-between from software to hardware gives you a pretty good grasp of what's happening under the glass. Sort of gives a whole new outlook towards those fellows who stay up all night to work on kernels for your phone, doesn't it?
Click to expand...
Click to collapse
ii. The operating system.
Once the kernel is loaded, the init scripts tell the Operating System to load. Android is the user interface for a custom built Java virtual machine called Dalvik. Dalvik was written by Dan Bornstein, who named it after the fishing village of Dalvik in Iceland, where his family originated from. The debate of which Java VM is superior is best left for another discussion, so I’ll simply say that DalvikVM is a register-based machine versus true JavaVMs which are stack based.
The Dalvik machine creates executable files (.dex files) which can be interpreted by the OS and run by the end user. These .dex files are OS version dependant. That simply means that applications and core functions built to work with one version of Android may or may not work well with other versions. Google provides the tools through it’s Software Development Kit (SDK) for applications to communicate with the OS.
Click to expand...
Click to collapse
iii. Core functions.
No smartphone would be complete without a set of functions that allow the device to be used as intended. Things like the phone and dialer interface, the calendar, the messaging system are core functions of the Operating System. In Android, these are run on top of the kernel as separate applications. The merits (or lack of) of providing these needed functions as separate applications is once again best left for another discussion, but this is what allows developers like HTC or Motorola to replace the standard functions with alternatives that provide a different look and feel from stock. HTC’s onscreen keyboard or Motorola’s MotoBlur contact list are great examples of this. The “little guy” isn’t left out of the mix either. Handcent SMS or Chomp SMS can integrate into the OS very well, as most of us already know.
An additional set of Core Functions are provided by Google. Popularly called GoogleBits, things like Gmail, sync, Gtalk and the Android Market are applications written by Google that give an extra set of useful functions to the OS. You’ll find these on all smartphones, as well as many other Android devices.
Click to expand...
Click to collapse
iv. Optional applications.
These are applications provided by the manufacturer to give the device even more usability. Things like the Amazon MP3 store, PDF readers, Corporate Calendar etc. allow you to do even more with your device. Remember - Droid Does
Click to expand...
Click to collapse
B. How is a ROM packaged?
In most cases a ROM will come packaged in a .zip file. The recovery image’s kernel (yes, it has one too!) has the ability to unzip and copy the contents into the correct place. Inside this zip file is a folder (META-INF\com\google\android\) that contains a script prepared by the ROM “cooker” (another of those techie terms - it means the person(s) who developed the ROM) that tells the system what to format, what to copy and where, and any file operations that need to be done. Each device does things a bit differently, but this script is where it all gets done. More on this folder later.
You’ll also see a /system folder. This is the meat of the ROM. It has the necessary OS files, the Core functions, and any optional applications the cooker decided to include. The folder is structured the same way it is on your device - /system/app, /system/framework, etc. The whole tree is usually copied over and the existing /system folder is overwritten. The cooker uses the script to tell the kernel to erase the existing system folder, copy the new folder over, and set the file permissions.
Sometimes you will also see a data folder. This usually is space set up for optional applications, including optional system tools like busybox or SuperUser white list. These applications could be placed in the /system folder, but placing them in the data folder makes it easier for the end user (you and I) to remove or update them as needed.
You’ll also notice a META-INF folder. This contains the update script we talked about earlier, as well as secure keys that need to be provided so the device knows the update can be trusted. A special note needs made here. Trusted means that the update is trusted to be in the correct form to load the device. It in no way means the ROM is safe from malicious code. Anyone is able to use a set of test keys and create a ROM that will flash and run your device - even those people with bad intentions. Flashing and running a custom 3rd party ROM is putting faith in the cooker that he or she not only knows what they are doing, but are honest as well. Also, some Motorola custom ROMs will have a small update.zip stored inside this folder to be run on first boot of the device.
Finally we are left with the boot.img file. This is the kernel and ramdisk image we discussed earlier. Your phone copies this over to be decompressed and run when the device boots.
Click to expand...
Click to collapse
2. How do I install a ROM?
In this section we’re discussing how to install a custom 3rd party ROM. ROMs from the manufacturer usually have a utility that runs on your PC to flash and load the new image.
A. Got Root???
Yes ?:good:!!!
Custom ROM’s simply will not load on devices that aren’t rooted. In theory, it may be possible to sign a 3rd party ROM with the keys that the stock recovery image will flash, but for the most part you need to have flashed a custom recovery image before you can change your device’s ROM. Instructions and tutorials on how to root your device are all over the internet. Some are good, some are bad. The hacking forum is a great place to go and learn more about rooting and how to successfully get it done on your device.
Click to expand...
Click to collapse
B. Recovery
Most Android devices have had a custom recovery image written for them. This will overwrite the stock recovery image, allowing you to flash 3rd party ROMs as well as giving extra functionality. Help with finding and flashing the custom recovery image for your device can also be found in the hacking forum. The installation of a custom recovery image also allows for a very important function. Backup and restore.
Click to expand...
Click to collapse
.C. Nandroid
Nandroid is a set of bash scripts and code written by that copies the state of your system and stores it in a folder on your SD card. You can then use the restore function of Nandroid to restore to this point at any time. This is a priceless feature and reason enough to root your phone. It’s included by default in most custom recovery images, and the code is freely available to use if you’re inclined to write your own recovery image.
Click to expand...
Click to collapse
In most situations, using Nandroid to back everything up is easy:
1. Verify you have a memory card with enough free space (~300MB to backup, ~500MB to restore).
2. Reboot your device into recovery. It’s slightly different for each device, once again hacking forum FTW!
3. Navigate through the menu and select the Nandroid Backup function.
4. Apply your choice and wait for the device to tell you it’s finished.
It’s always good practice to copy the entire nandroid folder from your SD card to a safe place. You can then copy it back to the SD card if the card is ever damaged, lost or erased.
D. Copy and Flash
You’re rooted, have downloaded a custom ROM, have your system backed up and are now ready to flash your device. This is not nearly as scary as it sounds.
1. Mount your SD card to your PC, and copy the .zip file to the root folder of the card. Don’t unzip the file, and don’t look for a folder called root. The root folder in this case means the base folder, what you will see when you mount your card to a PC or the device.
2. Reboot your phone into recovery.
3. Navigate through the recovery menu and select the flash update option. Depending on your recovery image, the file may need to be named update.zip, or you may be able to select any zip file on your card as long as it’s the correct format. The cooker knows this as well and if the ROM needs to be named update.zip it will be.
4. Apply your choice and wait for your device to tell you it’s finished.
5. Reboot.
Click to expand...
Click to collapse
It’s worth noting that many times a new ROM will require that you wipe and factory reset your devices data. While inconvenient, it’s often necessary to get rid of the old data as it may be incompatible. As long as you’re using the cloud for calendar and contacts, they will be re- downloaded and stored back on your device automatically.
Dirty flash and Clean flash
A dirty flash is only wiping cache and davlik then flashing your ROM....
a Clean flash is at LEAST factory reset/data wipe + wiping davlik(factory wipe takes care of /cache also)... Maybe doing a format /system also.
***Odin***
Odin is the ROM Flashing Tool for SAMSUNG smartphones. ROM files flashable with Odin come with .tar extension.
Most of the ROMs you are going to flash with Odin are the official stock Samsung ROMs (or leaked stock ROMs). Custom ROMs are rerely flashable by Odin because they come with .zip extension that Odin does not recognize (it recognizes .tar files).
Custom kernels, however, are sometimes provided in .tar format by their developers (e.g. CF-Root kernels), so that they can be flashed by Odin. When your phone is new and running official firmware you most often cannot flash a custom ROM to it because a Samsung phone often requires a custom recovery and root rights that are included in a custom kernel to be able to flash custom ROMs. That's why Odin often comes in handy in rooting and flashing a custom firmware to your phone because you (often) can flash a custom kernel with it that already includes root and custom recovery and enables you to flash custom firmware (custom ROMs). I use the word "often" very frequently in the previous sentence because every Samsung smartphone is different and requires various procedures for rooting it and flashing custom ROMs (see the section about using Odin below).
If it comes to stock ROMs, the best source of stock (official) Samsung ROM files is located at this excellent website: SamMobile.com/firmwares (link). It requires registration (it's free) and I encourage you to set up an account there because you will most likely use this site several times during your stay at XDA. You will most likely come across 1 .tar or 3 .tar file ROMs there, flashable by Odin. Refer to the Odin flashing guide below for more info.
Click to expand...
Click to collapse
****Heimdall****
What is Heimdall?
Heimdall is a cross-platform open-source tool suite used to flash ROMs onto Samsung Galaxy S devices.
How does it work?
Heimdall uses the same protocol as Odin to interact with a device in download mode. USB communication in Heimdall is handled by the popular open-source USB library, libusb-1.0.
Why “Heimdall”?
The flashing software Odin is named after the king of gods in Norse mythology. Loke, the software component on the Galaxy S that provides functionality to flash, may also to be named after an important character in Norse mythology, often translated as Loki. As such I have named my flashing software Heimdall, after the Norse god, and guardian of the Bifrost Bridge.
What platforms does Heimdall run on?
Linux, OS X and Windows (XP, Vista, 7 etc.)
Why use Heimdall when we can use Odin?
Odin is generally unreliable and only runs on Windows systems. Furthermore, Odin is leaked Samsung software that is not freely available or well understood by the community.
Is Heimdall safe?
No matter what method you chose, flashing firmware onto your phone has a lot of potential for disaster. We have tested Heimdall with a variety of phones flashing several different firmware versions resulting in a 100% success rate. As such we believe that Heimdall is generally reliable. However keep in mind, just like any flashing software, Heimdall has the potential to brick your phone if not used correctly.
How do Galaxy S phones get bricked when flashing?
Besides the inherent risks like power outs, accidental removal of the USB cable etc. The Galaxy S appears to be running extremely unreliable USB control software.
A failure to flash does not automatically equate to a bricked phone. However if you're extremely unlucky and the flash fails whilst transferring the primary boot-loader, secondary boot-loader or params.lfs (all quite small) than you've got yourself a paper weight that you're hoping Samsung will replace.
Please be extremely careful mixing files from different firmware releases. Don't do so unless you're certain it will work!
What Galaxy S variants has Heimdall been tested with?
We’ve tested Heimdall with a Galaxy S GT-I9000 (8 GB) from the United Kingdom and Galaxy S GT-I9000 (16 GB) from Australia. We don’t personally have access to any other devices to test with, however users have confirmed Heimdall functions correctly with the AT&T Captivate, Bell Vibrant, Telstra GT-I9000T, Epic 4G and the Galaxy Tab.
Click to expand...
Click to collapse
^
CWM Errors and Solutions
ERRORS encountered in CWM Recovery
.
What is CWM Recovery ?
ClockworkMod Recovery is a custom recovery for many Android devices. It is considered to be the most popular recovery for Android due to its easily-ported nature, and integration with ClockworkMod ROM Manager by Koush(Koushik Dutta). The easiest way to recognize it is by the printed name when it first starts, and the background logo of a gear and hat.
Click to expand...
Click to collapse
ERROR STATUS 6
This is usually caused by CR/LF EOL(Windows style End Of Line) in updater-script. Change it to LF EOL(Unix Style EOL) using Linux command: dos2unix updater-script, then re-signing the ZIP, will usually fix this error.
Click to expand...
Click to collapse
ERROR STATUS 7
This is usually caused by a corrupt download, or bad file signature. Re-downloading (or re-signing) the ZIP will usually fix this.
Click to expand...
Click to collapse
We have been consistently seen and heard people facing error “Status 7″ error while trying to flash or install
custom ROMs or firmware packages on their Android smart phones or tablets with ClockworkMod Recovery. Many
of the users are nowadays facing this problem with CWM Recovery while flashing .zip files of modded or custom
Ice Cream Sandwich (ICS) or Jelly Bean (JB) ROMs on their devices. So, you have also downloaded a custom ROM,
placed its .zip file in your phone’s or tablet’s SD card, booted into ClockworkMod Recovery, selected – “install zip
from sdcard” and then chosen the .zip file of the ROM to get it installed on your device. But instead of getting
flashed successfully, if you are facing the issue mentioned below, then just keep reading this article to find out
what’s wrong and fix up the problem :
Finding update package…
Opening update package…
Installing update…
Error in /sdcard/custom-jelly-bean-rom.zip (Status 7)
Installation aborted
Click to expand...
Click to collapse
or the following error right after CWM recovery shows –
Installing update…
assert failed: getprop(“ro.product.device”) == “I9103″ || getprop(“ro.build.product”) == “I9103″ || getprop
(“ro.product.board”) == “I9103″
Error in /sdcard/android-4-1-1-ics-rom-latest.zip (status 7)
Click to expand...
Click to collapse
So, if you are facing any of these errors while trying to install the desired custom ROM package on your Android
phone or tab, then you may try a various things or steps which may turn out to be the workaround of this
problem. Here are a few tips to get this “Status 7” error fixed in ClockworkMod Recovery and flash the ROM
successfully on your device :
(1) First of all, make sure your device’s bootloader is unlocked. If it is already unlocked but you are still
not able to flash the ROM, then just extract the .zip file of the ROM into a new folder, find the boot.img file from
that directory and flash it up on your phone or tablet via fastboot on your PC.
(2) Make sure that you are having the appropriate Radio or Baseband version installed on your device which is
supported by the custom ROM you are trying to flash. Most of the ROMs requires the latest version of Baseband, so
just update or upgrade your device to the latest Baseband version and then try to install the ROM once again.
(3) Update your device to the supported / latest build of official firmware before trying to install the ROM. You can
do it from – Settings > About Phone / Device > Software Update.
(4) Make sure you are having the supported or required kernel installed on your phone or tab. If it’s not, then flash
a new kernel right away and try to install your custom ROM once again.
(5) Is the ROM which you are trying to flash really works ? Find out whether it is working for other users or not.
Click to expand...
Click to collapse
Error Status 0
Well sometimes while flashing some ROMs especially the cooked ones we get Error status 0 in the CWM Recovery
this error is an indicator of Wrong Update Binary.This is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix this error.
Click to expand...
Click to collapse
Partitions
Now it's time for the partitions :good:
Let’s start with a list of standard internal memory partitions on Android phones and tablets. These are:
/boot
/system
/recovery
/data
/cache
/misc
In addition, there are the SD card partitions.
/sdcard
/sd-ext
Note that only /sdcard is found in all Android devices and the rest are present only in select devices. Let’s now take a look at the purpose and contents of each of these partitions.
/boot
This is the partition that enables the phone to boot, as the name suggests. It includes the kernel and the ramdisk. Without this partition, the device will simply not be able to boot. Wiping this partition from recovery should only be done if absolutely required and once done, the device must NOT be rebooted before installing a new one, which can be done by installing a ROM that includes a /boot partition.
/system
This partition basically contains the entire operating system, other than the kernel and the ramdisk. This includes the Android user interface as well as all the system applications that come pre-installed on the device. Wiping this partition will remove Android from the device without rendering it unbootable, and you will still be able to put the phone into recovery or bootloader mode to install a new ROM.
/recovery
The recovery partition can be considered as an alternative boot partition that lets you boot the device into a recovery console for performing advanced recovery and maintenance operations on it. To learn more about this partition and its contents, see the ‘About Android Recovery’ section of our guide to ClockworkMod recovery.
/data
Also called userdata, the data partition contains the user’s data – this is where your contacts, messages, settings and apps that you have installed go. Wiping this partition essentially performs a factory reset on your device, restoring it to the way it was when you first booted it, or the way it was after the last official or custom ROM installation. When you perform a wipe data/factory reset from recovery, it is this partition that you are wiping.
/cache
This is the partition where Android stores frequently accessed data and app components. Wiping the cache doesn’t effect your personal data but simply gets rid of the existing data there, which gets automatically rebuilt as you continue using the device.
/misc
This partition contains miscellaneous system settings in form of on/off switches. These settings may include CID (Carrier or Region ID), USB configuration and certain hardware settings etc. This is an important partition and if it is corrupt or missing, several of the device’s features will will not function normally.
/sdcard
This is not a partition on the internal memory of the device but rather the SD card. In terms of usage, this is your storage space to use as you see fit, to store your media, documents, ROMs etc. on it. Wiping it is perfectly safe as long as you backup all the data you require from it, to your computer first. Though several user-installed apps save their data and settings on the SD card and wiping this partition will make you lose all that data.
On devices with both an internal and an external SD card – devices like the Samsung Galaxy S and several tablets – the /sdcard partition is always used to refer to the internal SD card. For the external SD card – if present – an alternative partition is used, which differs from device to device. In case of Samsung Galaxy S series devices, it is /sdcard/sd while in many other devices, it is /sdcard2. Unlike /sdcard, no system or app data whatsoever is stored automatically on this external SD card and everything present on it has been added there by the user. You can safely wipe it after backing up any data from it that you need to save.
/sd-ext
This is not a standard Android partition, but has become popular in the custom ROM scene. It is basically an additional partition on your SD card that acts as the /data partition when used with certain ROMs that have special features called APP2SD+ or data2ext enabled. It is especially useful on devices with little internal memory allotted to the /data partition. Thus, users who want to install more programs than the internal memory allows can make this partition and use it with a custom ROM that supports this feature, to get additional storage for installing their apps. Wiping this partition is essentially the same as wiping the /data partition – you lose your contacts, SMS, market apps and settings.
With this, we conclude our tour of Android partitions. Now whenever you install a ROM or mod that requires you to wipe certain partitions before the installation, you should be in a better position to know what you’re losing and what not and thus, you’ll know what to backup and what not.
You should at least post the source of such a large copy paste post.
Sent from my GT-N7100 using Tapatalk 2
Source? How do you post a source for an article which is compiled from 10+ sites? Plus my own addition?
Started from the bottom
Good job man, this saves me the time to do all this researches.
Keep it up
Best regards
Sifou
Using a Samsung N7100
sos_sifou said:
Good job man, this saves me the time to do all this researches.
Keep it up
Best regards
Sifou
Using a Samsung N7100
Click to expand...
Click to collapse
DO tell me if you have some suggestions for the thread.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
I think that this is a pretty good summary of the basics. I even converted it to epub and stocked it on my e-reader for reference
You can get to the details if you want? Adding some info about flashing softwares like odin and the Linux based one (i don't remember it name)
The different recoveries available and their advantages vs désavantages
How to protect yourself from malicious applications, starting from knowing what are permissions...
Keep it up mate
Best regards
Sifou
Using a Samsung N7100
sos_sifou said:
I think that this is a pretty good summary of the basics. I even converted it to epub and stocked it on my e-reader for reference
You can get to the details if you want? Adding some info about flashing softwares like odin and the Linux based one (i don't remember it name)
The different recoveries available and their advantages vs désavantages
How to protect yourself from malicious applications, starting from knowing what are permissions...
Keep it up mate
Best regards
Sifou
Using a Samsung N7100
Click to expand...
Click to collapse
Heimdall?
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Tha TechnoCrat said:
Source? How do you post a source for an article which is compiled from 10+ sites? Plus my own addition?
Started from the bottom
Click to expand...
Click to collapse
I guess you have a point, it's just the scientist in me with source-referral-ocd.
Sent from my GT-N7100 using Tapatalk 2
adytum said:
I guess you have a point, it's just the scientist in me with source-referral-ocd.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
DO tell me if you have any problems or if you want something to be added.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Thread updated with Odin and Heimdall information.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Tha TechnoCrat said:
Source? How do you post a source for an article which is compiled from 10+ sites? Plus my own addition?
Started from the bottom
Click to expand...
Click to collapse
By listing ALL the different sources? And obviously crediting yourself with bits you've added.
Sent from my GT-N7100 using xda premium
You should make the title of the thread more presentable though.
Simone said:
You should make the title of the thread more presentable though.
Click to expand...
Click to collapse
Would like some suggestions.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Tha TechnoCrat said:
Would like some suggestions.
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"
Click to expand...
Click to collapse
You should think of your own. That would be the best
Make it more professional looking, though.
Everything else is good.
Guys I have got my Note 2 finally. Will compile some guides for it too.
Sent from my GT-N7100 using xda app-developers app
You bought a note 2? Congrats mate !
Best regards
Sifou
Using a Samsung N7100
sos_sifou said:
You bought a note 2? Congrats mate !
Best regards
Sifou
Using a Samsung N7100
Click to expand...
Click to collapse
Thanks buddy. Get ready for more guides
Sent from my GT-N7100 using xda app-developers app