Database Users

Android For Dummies

This thread is aimed for those who are new, or in the dark about the terminologies used throughout this forum. I do hope it will in some way or another enlighten you, and help make understanding what you read much easier:
Ill start off below with some basic terminology of the android platform, and also some file types:
Common Terminology
adb: Android Debug Bridge, a versatile tool lets you manage the state of an emulator instance or Android-powered device
ADK: Android Development Kit, What people use to develop anything for the droid such as ROM's
Baseband: In communications and signal processing, the baseband describes signals and systems whose range of the frequencies measured from close to 0 hertz to a cut-off frequency, a maximum bandwidth or highest signal frequency; it is sometimes used to describe frequencies starting close to zero
Boot Loader: State in which the droid can be flashed from RSD with an appropriate .sdk file that reprograms the phone into a specific ROM or update. This is typically a last resort when the recovery screen cannot be reached to make a much simpler and less risky solution
Boot Loop: simply means something is preventing the phone from completing it's boot cycle and is stuck between the boot animation and the unlock screen, creating a looped animation. This is often fixed by either reloading a Nandroid, or Reflashing a rom from the Boot Loader.
Brick or Bricked: Jargon for a completely unrecoverable device, (no more than a brick or paperweight)
Bug or Software Bug: an Error or flaw in software that produces a failure or unexpected/unwanted result. Typically created from incorrect code, this is why some ROMs are better and smoother running than others because certain developers have taken the time to input "perfect" code
Busybox: BusyBox is a single multicall binary that packages the functionality of most widely used standard Unix tools, BusyBox provides a fairly complete environment for any small or embedded system.
ClockworkMod: A recovery program that is often used to apply updates, ROMs, or create a back up or restore a backup file
De-odex: Apk files have respective odexes that devs use to supposedly save space. Deodexing means you convert it back to a .dex file and put it back inside the apk. This allows you to easily replace files (not having to worry about odexes), but the main point was to deodex services.jar so that you can change all text to different colors (such as the clock color to white) and to deodex services.jar, you need to deodex everything.
Dev. or Developer: An individual that creates, or alters a file in such a manner as to advance the program
Flash or Flash Memory: a program technology that can be electrically erased and reprogrammed
Kernel: The governor of the CPU usage and Battery output, one can upload certain Kernels to achieve greater performance speed of their device at the cost of some battery life
Nandroid or Nandroid Backup: A file typically created in the custom recovery program, such as SPRecovery, that is a carbon copy of whatever state your phone is in before a drastic change is made. the file then can be moved onto or off of the SD card for later use in case something should go wrong in the ROM or Update, or a Boot Loop occurs
OS: Operating system, I.E. Windows Vista or MAC or ANDROID
Overclocking: Speeding up the CPU past the factory presets to achieve a faster and more responsive device
ROM: Read Only Memory, a program used to make changes to anything from the look of the home screen, to icons to custom boot animation
Root: Common word associated with giving a user "super user" access to their phones programming and other various aspects that would normally not be possible, also known as "Jailbroken" for iPhone's
Shell or SSH: secure shell or ssh is a network protocol that allows data to be exchanged using a secure channel between two networked devices
SPR or SPRecovery: A recovery program that is often used to apply updates, ROMs, or create a back up or restore a backup file
Stock: Simply means an unaltered state, such as when you first purchase your phone from Verizon, or when you do a factory reset. Current stock image is Android 2.2 (Froyo)
SU: "Super user", or root permissions
Theme: A set of icons, backgrounds and app trays that change the ascthetics of the overall look of the droid and its applications
TUN/TAP: Refers to a network Tunnel, operates within layer 3 packets, or ip packets. Packets sent by a system via a TUN/TAP device are delivered to a user-space program that attaches itself to the device. A user space program may also pass packets into a TUN/TAP device. In this case TUN/TAP device delivers (or "injects") these packets to the operating system's network stack thus emulating their reception from an external source.
Underclocking: Slowing down the CPU mainly to limit battery usage
File types:
.apk or APK's: An .apk file extension denotes an Android Package (APK) file, an .apk file can be opened and inspected using common archive tools
.sbf: Summation Briefcase File
.tar: Similar to a zip file, a tar file archives multiple files into one file
.tgz: TGZ files are commonly used as install packages for Slackware Linux.
.zip: Zipped file used to archive multiple files into one to save space and allow for single download
Reference Source: http://developer.android.com/guide/appendix/glossary.html

Understanding Root Terms & Procedures
Understanding ROM’s and builds
A ROM is essentially a custom version of Android. They are developed by independent geniuses smarter than you and me. Each tweaks, combines, or optimizes Android to offer something standard versions lack. Within ROM’s, you have what are known as builds (basic branches of Android code) that offer certain features and characteristics.
Think of it as a crude metaphor for Microsoft Windows. There’s XP, Vista, and Windows 7. All three are Windows operating systems and can typically run the same programs, but there are major differences between them. Within each OS, there’s further distinction between Vista Home, Vista Pro, and Vista Ultimate. Likewise, one ROM can spawn multiple versions. For instance, there are several flavors of Drake’s Hero ROM..
Each developer creates his ROM with its own purpose and feature set. Just because something works in Cyanogen’s ROM doesn’t mean it can work in Drake’s (or more specifically that they want to implement the feature at all).
Be advised that some ROM’s require a wipe (erases all information stored on your phone) before or after installation. This is done when you enter the recovery mode and perform a “factory data reset.” Developers will say if a wipe is necessary whenever you flash (load/install) a ROM
Where To Download ROMs
You’ll notice that ROM threads begin with the “[ROM]” tag. you can download them from here ALWAYS read the instructions before attempting to load a ROM. Each contains critical instructions or requirements that can cause big trouble if not followed correctly. Be sure to read change logs/release notes (plainly stated notes written by developers to explain updates). They will reveal important information and point out new features.
Before loading a ROM, perform a backup!
Using Recovery images and Nandroid back-ups
You may remember the recovery image from the one-click process. You’ll also use the recovery image to change ROM’s, apply themes, backup your phone state, and perform other functions. To launch the recovery image, turn off your phone and reboot by pressing Home and Power at the same time.
Performing a backup is typically a good idea when you enter the recovery image to load a ROM. I try to backup my phone at least once every 3 times I update to a new ROM. Nandroid will backup your phone’s state, allowing you to return to the settings/state saved to your SD card. If something goes wrong, it can be your best friend. The Cyanogen recovery image that came with one-click thankfully has Nandroid built-in, allowing easy backup/restore.
Credit to Androinica (Reference Source): http://androinica.com/2009/09/how-to-understand-android-root-terms-and-procedures/

Saved for Future Posts

Nice post for green-hand.

Thanks for taking the time to set this one up.

ur most welcome. if you have any additional information that u see fit to be added on, or any mistakes that need correction, please feel free to PM me

[REF] All in One New User Guide With Video Tutorial

If you just switched from iPhone or BB or this is ur first android. Read this thoroughly and see ur questions get eliminated by this guide. if you find this helpful than show your appreciation and hit that thnx button.
All Credit Goes to appdroid for this amazing post.
I don't take any credit I Googled everything. I do take credit of modifying some stuff in word. I won't have this Phone but I am just being helpful to the community.
Little in-depth information about Android. Must Read. Thank You Pirateghost.
ADB → Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device..
Android →Unveiled on 5 November 2007, Android is a mobile operating system running on the Linux kernel developed by Google.
AOSP → Android Open Source Project
Apps2SD → Move applications from the internal NAND memory on the device to a removable SD Card.
BLN → BackLight Notification
Bloatware → Software bloat is a process whereby successive versions of apps include an increasing proportion of unnecessary features that are not used by end users, or generally use more system resources than necessary, while offering little or no benefit to its users. Like all the crap that comes from At&t
Brick → When used in reference to consumer electronics, "brick" describes a device that cannot function in any capacity (such as a device with damaged firmware). This usage derives from the fact that some electronic devices (and their detachable power supplies) are vaguely brick-shaped, and so those which do not function are useful only as actual bricks. The term can also be used as a verb. For example, "I bricked my phone when I tried to modify its firmware."[
Hard Brick → When your phone does not turn on at all. When you can’t get in to CWR/CWM Or Stock recovery. You are basically screwed.
Soft Brick → When your phone bootloops. When you can get into CWR/CWM. When You can use jigtag to get into download mode.
Busybox → BusyBox provides several stripped-down Unix tools in a single executable. It runs in a variety of POSIX environments such as Linux, Android, FreeBSD and others, such as proprietary kernels, although many of the tools it provides are designed to work with interfaces provided by the Linux kernel. It was specifically created for embedded operating systems with very limited resources. Platforms counterparts, but they are pretty close and useful nonetheless.
CWR OR CWM ClockworkMod Recovery →A custom recovery for Android phones and tablets that allows you to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren’t possible with the stock recovery.
DEODEX → Apk files have respective odexes that devs use to supposedly save space. Deodexing means you convert it back to a .dex file and put it back inside the apk. This allows you to easily replace file (not having to worry about odexes), but the main point was to deodex services.jar so that you can change all text to different colors (such as the clock color to white) and to deodex services.jar, you need to deodex everything.
Flashing → The process of applying a firmware image (or ROM) to a device. It generally entails a very specific order of steps. Failing to complete any one of these steps properly may result in bricking the device.
Firmware → is a term often used to denote the fixed, usually rather small, programs and/or data structures that internally control various electronic devices. Programs stored in the ROM, EPROM, or flash memory that usually control various internal electronic devices (Hard Drives, Keyboards, Displays, etc). Firmware is typically 'fixed' software that is not updated in consumer devices, however it is often updated (or 'flashed') by advanced users to fix bugs or add features to the device. Flashing firmware designed for one device onto a different device, or not following a specific procedure while flashing will often render the device unusable.
Kernel → is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level. The kernel's responsibilities include managing the system's resources (the communication between hardware and software components
Radio → The cellular radio on the device which needs control software called firmware to control it.
ROM → Read Only Memory. In the context of an Android device, ROM is the internal flash memory where the core operating system resides. It can also refer to a specific version firmware that can be applied to a device through a process usually referred to as flashing. An improperly flashed ROM can often brick the device, rendering it unusable.
Superuser→ A program, which gives unlimited access privileges to perform any or all operations on the operating system.
ODIN → Odin is the Samsung software used to update Samsung phones. It does not work with any other devices other than official Samsung phones.
OTA or FOTA → (F)OTA stands for (Firmware) Over The Air and is the process by which required updates and enhancements to your phone's basic operating system can be sent to you through the cellular network. The Galaxy S II software update will be sent via FOTA and is available through Samsung Kies mini.0
ODEX → In Android file system, applications come in packages with the extension .apk. These application packages, or APKs contain certain .odex files whose supposed function is to save space. These ‘odex’ files are actually collections of parts of an application that are optimized before booting. Doing so speeds up the boot process, as it preloads part of an application. On the other hand, it also makes hacking those applications difficult because a part of the coding has already been extracted to another location before execution.
SDK → Software Development Kit.
Logcat → A debugging tool built into Android devices that displays system logs as they occur. See Logcat.
NANDroid → A set of tools that will enable anyone who has root on their Android device to make FULL system backups, in case something goes wrong or you want to try out that new experimental ROM/theme. NANDroid will backup (and restore) /system, /data, /cache, and /boot partitions.
Recovery Mode → A special environment that you can boot into for troubleshooting and upgrading purposes.
Kang → The process of creating a code based of someone else's code or reapplying code that someone else created into your own code (e.g. git cherry-pick)
Rooting → is a process that allows users of mobile phones and other devices running the Android operating system to attain privileged control (known as "root access") within Android's Linux subsystem with the goal of overcoming limitations that carriers and manufacturers put on some devices.

HOW TO ROOT YOUR SAMSUNG GALAXY SIII I9300
Step 1. Download Odin3.07 from HERE
Step 2. Power off your Galaxy S3. Then hold down Volume Down, Center Home, and Power buttons together until you see the warning screen.
Step 3. Hit Volume Up button to enter Download mode and connect a microUSB cable from your Galaxy S3 to your computer.
Step 4. Next, download GalaxyS3RootNew.zip, unzip the files and run odin3.07.exe by double-clicking on the file.
Step 5. When ODIN program opens, you should find a highlighted yellow box with a random COM number. If you don’t see this, download and install Samsung USB drivers below:
SAMSUNG_USB_Driver_for_Mobile_Phones.exe
Step 6. DO NOT TOUCH ANYTHING ELSE, hit “PDA” button and select the file CF-Root-SGS3-v6.4.tar.
Step 7. Hit “Start” button. This will install ClockworkMod Recovery on your Galaxy S3 i9300. If you get stuck on this step, just try a different USB port.
Step 8. Once ODIN is done flashing, you will see “PASS!” in green highlighted box.
Step 9. Your Galaxy S3 will reboot once into CWM Recovery and automatically install root and Superuser app.
Step 10. Once your phone reboots, you will find an app called “SuperSU”, this is your superuser app.
Step 11. Download and install Titanium Backup app from Play Store to verify you have root, a Superuser request window should pop up.
That’s it! This should take you less than 5 minutes to do and does not affect your phone in any way but give you Superuser, root, and custom ClockworkMod Recovery.
I highly recommend you to boot into ClockworkMod Recovery and make your first backup ROM at this point, which will save everything including the stock ROM, your apps and settings.
Thanks to galaxys3root.com for sources

HOW TO DO A NANDROID BACKUP
Step 1. We will first reboot into ClockworkMod Recovery by holding down Volume Up, Center Home, and Power buttons together for about 10 seconds.
Step 2. Once in ClockworkMod Recovery on your rooted Galaxy S3, choose “backup and storage”.
Step 3. You will have an option to “backup” or “backup to internal storage”. The first option will backup to your microSD card while the latter to the internal storage.
Step 4. Your rooted Galaxy S3 should now be backing up. Backing up ROM takes 5-10 minutes so go ahead and get your cup of coffee and come back.
HOW TO RESTORE FROM A BACKUP
Step 1. To restore ROM, simply use the same “backup and restore” menu then choose “restore” or “restore from internal sdcard” depending on where you backed up your ROM.
That was easy right?
So, don’t delay and make a backup ROM if you just rooted your phone, you will thank me later and save yourself time and headache when things go wrong.
Thanks to galaxys3root.com for sources

HOW TO FLASH A ROM
Basic Steps
! Choose the ROM that you want and download its .zip file
!! Transfer the zip file to your phone’s sd card. Do not put it into any folder.
!!! Turn off your phone and reboot into recovery, usually by holding the down button and power button at the same time.
!!!! Do a Nandroid backup
!!!!! Do a full Data wipe, wipe the Cache and also wipe Dalvik
!!!!!! Flash the zip file that you put on your sd card
!!!!!!! Reboot phone
You can find all ROMS HERE

HOW TO FLASH A KERNEL WITH CMW
_Download the Kernel You want to flash and put it in sd card.
__Boot in to CWM!
___Wipe cache & Dalvik Cache
____Press install from Sd card!
_____Select the kernel that you dloaded!
______Flash it!
_______Reboot!
________Check in CPU SPY to see if you successfully flashed Kernel.
All Kernels Can Be Found In The Development Section

HOW TO GO BACK TO UNROOTED STOCK
Step 1 - Download an Official Stock Rom from - HERE
Step 2 - Extract the Firmware
Step 3 - Open up Odin
Step 4 - Turn OFF your device
Step 5 - Put your device into Download MODE (Home + Volume Down + Power)
Step 6 - Click PDA and select *.tar.md5
Step 7 - Then finally click START!

Great noob dictionary!
But why reserve so many posts?
I guess they're free right?

nfsmw_gr said:
Great noob dictionary!
But why reserve so many posts?
I guess they're free right?
Click to expand...
Click to collapse
Thank You. I have only edited this Guide to adapt to this Phone.
And now you should be able to see why I reserved so many posts lol

Nick Fury said:
Thank You. I have only edited this Guide to adapt to this Phone.
And now you should be able to see why I reserved so many posts lol
Click to expand...
Click to collapse
Got it,now it makes sense...great work mate.

Nick Fury said:
!!!!! Wipe the phone 3 times by clearing cache/factory restore 3 times and wiping dalvik cache and system format
!!!!!!
Click to expand...
Click to collapse
3 times is a little overkill don't ya think? In fact I remember seeing a ROM thread in the development section waaay back in the first few weeks of launch and a dev had in his set of instructions to wipe and factory reset 3 times before flash. A moderator made him change it because it was unnecessary to wipe that many times and stated that it would cause issues... what exactly, I can't remember but it sounded legit. Just my 2 cents
But.. great reference guide!
Sent from my GT-I9300 using xda premium

Coreym said:
3 times is a little overkill don't ya think? In fact I remember seeing a ROM thread in the development section waaay back in the first few weeks of launch and a dev had in his set of instructions to wipe and factory reset 3 times before flash. A moderator made him change it because it was unnecessary to wipe that many times and stated that it would cause issues... what exactly, I can't remember but it sounded legit. Just my 2 cents
But.. great reference guide!
Sent from my GT-I9300 using xda premium
Click to expand...
Click to collapse
Thank You for the Feedback and the post has now been edited with the Correct information.

If anyone finds that any of the information above is incorrect or needs updating then please let me know and I will get the Guide updated.
Thank You for reading.

Nice one
Nick Fury said:
If anyone finds that any of the information above is incorrect or needs updating then please let me know and I will get the Guide updated.
Thank You for reading.
Click to expand...
Click to collapse
Thank you for setting up this guide.
"account currently disabled" ??

Great guide for newbies.
Cheers!
Sent from my GT-I9300 using xda app-developers app

Thanks
Hi,
Great intro for noobs.
Keep up the good work.

another great thread nick
i'm in the process of researching both the language and process of rooting my s2. i've been reading articles and watching videos and will write out a "script" for me to follow before i root and flash a ROM. would it be OK to ask a few questions prior to this endeavor to clear up any uncertainties i might have? i know XDA has rigid rules as to where to discuss certain topics (which i completely respect and understand).

bk11222 said:
i'm in the process of researching both the language and process of rooting my s2. i've been reading articles and watching videos and will write out a "script" for me to follow before i root and flash a ROM. would it be OK to ask a few questions prior to this endeavor to clear up any uncertainties i might have? i know XDA has rigid rules as to where to discuss certain topics (which i completely respect and understand).
Click to expand...
Click to collapse
Please feel free to to ask any questions. This would be the perfect spot as it is topic related.
Sent from my GT-I9300 using xda premium

thanks!
great guide includes everything thanks :good:

R: [REF} All in One guide for NOOBS! With Videos Now!
Glad Thatcher tour thread seems to have more success than mine which id similar but with some others tutorials
You can see it here http://forum.xda-developers.com/showthread.php?t=2113656
Sent from my GT-I9300 using xda app-developers app

R: [REF} All in One guide for NOOBS! With Videos Now!
Since my thread was closed ( i don't know if it was reported to admin by someone asking to close it) i could paste my tutorials here if you want
Sent from my GT-I9300 using xda premium

[REF} All in One guide for NOOBS! With Videos Now!

If you just switched from iPhone or BB or this is ur first android. Read this thoroughly and see ur questions get eliminated by this guide. if you find this helpful than show your appreciation and hit that thnx button.
All Credit Goes to appdroid for this amazing post.
I don't take any credit I Googled everything. I do take credit of modifying some stuff in word. I won't have this Phone but I am just being helpful to the community.
Little in-depth information about Android. Must Read. Thank You Pirateghost.
ADB → Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device..
Android →Unveiled on 5 November 2007, Android is a mobile operating system running on the Linux kernel developed by Google.
AOSP → Android Open Source Project
Apps2SD → Move applications from the internal NAND memory on the device to a removable SD Card.
BLN → BackLight Notification
Bloatware → Software bloat is a process whereby successive versions of apps include an increasing proportion of unnecessary features that are not used by end users, or generally use more system resources than necessary, while offering little or no benefit to its users. Like all the crap that comes from At&t
Brick → When used in reference to consumer electronics, "brick" describes a device that cannot function in any capacity (such as a device with damaged firmware). This usage derives from the fact that some electronic devices (and their detachable power supplies) are vaguely brick-shaped, and so those which do not function are useful only as actual bricks. The term can also be used as a verb. For example, "I bricked my phone when I tried to modify its firmware."[
Hard Brick → When your phone does not turn on at all. When you can’t get in to CWR/CWM Or Stock recovery. You are basically screwed.
Soft Brick → When your phone bootloops. When you can get into CWR/CWM. When You can use jigtag to get into download mode.
Busybox → BusyBox provides several stripped-down Unix tools in a single executable. It runs in a variety of POSIX environments such as Linux, Android, FreeBSD and others, such as proprietary kernels, although many of the tools it provides are designed to work with interfaces provided by the Linux kernel. It was specifically created for embedded operating systems with very limited resources. Platforms counterparts, but they are pretty close and useful nonetheless.
CWR OR CWM ClockworkMod Recovery →A custom recovery for Android phones and tablets that allows you to perform several advanced recovery, restoration, installation and maintenance operations on your Android device that aren’t possible with the stock recovery.
DEODEX → Apk files have respective odexes that devs use to supposedly save space. Deodexing means you convert it back to a .dex file and put it back inside the apk. This allows you to easily replace file (not having to worry about odexes), but the main point was to deodex services.jar so that you can change all text to different colors (such as the clock color to white) and to deodex services.jar, you need to deodex everything.
Flashing → The process of applying a firmware image (or ROM) to a device. It generally entails a very specific order of steps. Failing to complete any one of these steps properly may result in bricking the device.
Firmware → is a term often used to denote the fixed, usually rather small, programs and/or data structures that internally control various electronic devices. Programs stored in the ROM, EPROM, or flash memory that usually control various internal electronic devices (Hard Drives, Keyboards, Displays, etc). Firmware is typically 'fixed' software that is not updated in consumer devices, however it is often updated (or 'flashed') by advanced users to fix bugs or add features to the device. Flashing firmware designed for one device onto a different device, or not following a specific procedure while flashing will often render the device unusable.
Kernel → is the main component of most computer operating systems; it is a bridge between applications and the actual data processing done at the hardware level. The kernel's responsibilities include managing the system's resources (the communication between hardware and software components
Radio → The cellular radio on the device which needs control software called firmware to control it.
ROM → Read Only Memory. In the context of an Android device, ROM is the internal flash memory where the core operating system resides. It can also refer to a specific version firmware that can be applied to a device through a process usually referred to as flashing. An improperly flashed ROM can often brick the device, rendering it unusable.
Superuser→ A program, which gives unlimited access privileges to perform any or all operations on the operating system.
ODIN → Odin is the Samsung software used to update Samsung phones. It does not work with any other devices other than official Samsung phones.
OTA or FOTA → (F)OTA stands for (Firmware) Over The Air and is the process by which required updates and enhancements to your phone's basic operating system can be sent to you through the cellular network. The Galaxy S II software update will be sent via FOTA and is available through Samsung Kies mini.0
ODEX → In Android file system, applications come in packages with the extension .apk. These application packages, or APKs contain certain .odex files whose supposed function is to save space. These ‘odex’ files are actually collections of parts of an application that are optimized before booting. Doing so speeds up the boot process, as it preloads part of an application. On the other hand, it also makes hacking those applications difficult because a part of the coding has already been extracted to another location before execution.
SDK → Software Development Kit.
Logcat → A debugging tool built into Android devices that displays system logs as they occur. See Logcat.
NANDroid → A set of tools that will enable anyone who has root on their Android device to make FULL system backups, in case something goes wrong or you want to try out that new experimental ROM/theme. NANDroid will backup (and restore) /system, /data, /cache, and /boot partitions.
Recovery Mode → A special environment that you can boot into for troubleshooting and upgrading purposes.
Kang → The process of creating a code based of someone else's code or reapplying code that someone else created into your own code (e.g. git cherry-pick)
Rooting → is a process that allows users of mobile phones and other devices running the Android operating system to attain privileged control (known as "root access") within Android's Linux subsystem with the goal of overcoming limitations that carriers and manufacturers put on some devices.

HOW TO ROOT YOUR GALAXY SII I9100
For those of you who want to root your Galaxy S2 GT-i9100 on ICS (Ice Cream Sandwich Android 4.0+), here’s how to do it by flashing a new kernel.
Step 1. First, put your Galaxy S2 into download mode by holding down Volume Down, Center, and Power button together for about 10 seconds.
Step 2. When you see the warning screen, hit Volume Up button to enter download mode.
Step 3. Connect a micro-USB cable from your Galaxy S2 to your computer.
Step 4. Download ODIN program and CF Kernel. Then unzip both files. - Odin3v1.85.zip - CF Kernel
Step 5. Run the ODIN program. You should see a yellow highlighted rectangle box with a number. If you don’t, you need to install Samsung Kies. - Samsung Kies
Step 6. Hit “PDA” and choose the “CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar” file you unzipped earlier.
Step 7. Hit “Start” and the kernel will start flashing to your phone.
Step 8. Your phone will reboot when it’s done.
Step 9. Once you reboot, check that you have the SuperSU app. If you do, you are rooted. Congrats!

HOW TO DO A NANDROID BACKUP
For those of you who’ve recently rooted your Samsung Galaxy S2 Android smartphone, you will probably want to learn how to backup/restore ROMs on your phone using ClockworkMod Recovery. By backing up your rooted ROM, you will have an insurance in case something goes wrong in the future such as bricking your phone while installing a new kernel or ROM.
After rooting, we highly advise you to backup your rooted stock ROM as you will also need this to unroot if needed later on.
Here’s how to backup/restore ROM on your Galaxy S2:
Step 1. Power off your phone then reboot into ClockworkMod Recovery by holding down Volume Up, Home button, and Power button together
Step 2. Once in ClockworkMod Recovery, choose “Backup and Restore” and hit the Power button.
Step 3. Choose “Backup” and hit the Power button.
Step 4. When backup is done, it will be backed up to a folder with current date and time. You can always change this folder name to something more memorable like “rooted stock ROM”.
HOW TO RESTORE FROM A BACKUP
Step 1. To restore, simply hit “Restore” instead of “Backup” and choose the backup folder you want to restore.
Backup will backup everything including your ROM, kernel, contacts, apps, etc…etc… The only thing that won’t be backed up are the contents of your SD card.

HOW TO FLASH A ROM
Basic Steps
! Choose the ROM that you want and download its .zip file
!! Transfer the zip file to your phone’s sd card. Do not put it into any folder.
!!! Turn off your phone and reboot into recovery, usually by holding the down button and power button at the same time.
!!!! Do a Nandroid backup
!!!!! Do a full Data wipe, wipe the Cache and also wipe Dalvik
!!!!!! Flash the zip file that you put on your sd card
!!!!!!! Reboot phone
You can find all ROMS Here

HOW TO FLASH A KERNEL WITH CMW
_Download the Kernel You want to flash and put it in sd card.
__Boot in to CWM!
___Wipe cache & Dalvik Cache
____Press install from Sd card!
_____Select the kernel that you dloaded!
______Flash it!
_______Reboot!
________Check in CPU SPY to see if you successfully flashed Kernel.
All Kernels Can Be Found In The Development Section

HOW TO GO BACK TO UNROOTED STOCK
Step 1. Download and UNZIP Latest Stock Rom Here
Step 2. Put your Galaxy S2 i9100 into download mode by holding down Volume Down, Center button, and Power button together for about 10 seconds until your phone reboots and you see the warning sign. Press Volume Up button to enter download mode.
Step 3. Connect a micro-USB cable to your Galaxy S2 from your computer.
Step 4. Download ODIN, unzip, and run the program - Odin3v1.85.zip
Step 5. When ODIN runs, you should see a yellow highlight with a COM appearing. If you don’t see it, Download Samsung Kies Here and install. Then plug-out and plug in your micro-USB cable to your phone, you should see it now.
Step 6. Choose “PDA” in ODIN and choose the stock ROM file you downloaded/unzipped earlier.
Step 7. Hit “Start” and your phone should start unrooting/unbricking back to ICS official stock ROM.
Step 8. Your Galaxy S2 i9100 will reboot after 5-10 minutes.
Step 9. Your phone should now be on stock ICS.

Great idea for a thread.
I hope it will help all the noobs out there.

If anyone finds that any of the information above is incorrect or needs updating then please let me know and I will get the Guide updated.
Thank You for reading.

Thanks. Indeed a helpful guide. The stock rom for ICS is applicable for all regions ?
Sent from my GT-I9100

kt_samuel said:
Thanks. Indeed a helpful guide. The stock rom for ICS is applicable for all regions ?
Sent from my GT-I9100
Click to expand...
Click to collapse
Each stock ROM has a different modem inside for a specific model/region . Quick answer, it should work for all i9100 models. If you are on other variants like G or P or T, get the specific stock ROMs meant for them, the i9100 stock will not work.

Very nicely done OP.

I think this has been one of the better ideas on forums, making threads like this that explain the basics to people. Now, if we can just get people to READ them! haha.

thanks guys! this is very helpful

Hi I'm trying to root my sg2 for step 6 does it matter that the last 3 letters don't match my existing kernel?
I'm on Ics 4.0.4 my letters are LPT.
I've been reading and reading all these posts and guides and I'm confused :-\
Sent from my GT-I9100 using Tapatalk 2

brilliant idea & big thanks for the effort involved.
I have just acquired the phone (moved from the HTC Desire)
The links in post #6 are not working - ?any mirrors
Cheers

shamonee said:
Hi I'm trying to root my sg2 for step 6 does it matter that the last 3 letters don't match my existing kernel?
I'm on Ics 4.0.4 my letters are LPT.
I've been reading and reading all these posts and guides and I'm confused :-\
Sent from my GT-I9100 using Tapatalk 2
Click to expand...
Click to collapse
No it doesnt matter about the last 3 letters. And by flashing the CF Root Kernel only roots the device and gives Root Access for the user. Hope this clears things up abit mate.
cifa said:
brilliant idea & big thanks for the effort involved.
I have just acquired the phone (moved from the HTC Desire)
The links in post #6 are not working - ?any mirrors
Cheers
Click to expand...
Click to collapse
Hi I have just personally tested all the download links provided in all posts and can confirm them all to be working.
Hooe the problem is sorted for you now.
If you are still unable to download the files needed then please let me know and i will provide alternative links
Thanks
Sent from my GT-I9300 using xda premium

@ Nick Fury
Thanks for the headsup - links working again - & files downloaded.
what version of ICS is in the stock - I want to take my S2 which is on 2.3 up to ICS - but want to avoid ICS 4.04 (been reading about hard brick potential)
my S2 Model number is GT-I9100P - the stock you link to is definitely compatible with my model?
Thanks in advance....

cifa said:
@ Nick Fury
Thanks for the headsup - links working again - & files downloaded.
what version of ICS is in the stock - I want to take my S2 which is on 2.3 up to ICS - but want to avoid ICS 4.04 (been reading about hard brick potential)
my S2 Model number is GT-I9100P - the stock you link to is definitely compatible with my model?
Thanks in advance....
Click to expand...
Click to collapse
Im not completely sure if the linked Rom is compatable with your version 100% as I dont own this device any longer.
Might be worth asking around for the compatability listing.
I confirm that all information is correct with GT-I9100.
I honestly wish I could help more but its just the compatibility with your Model im unsure of.
If you find that listed Rom is compatible with your Device then please follow all the steps as listed in the Posts and there will be no problems.
But if this is your first time then I do advice to also download the Android Stock 2.3 Firmware aswell as a backup.
So if something does go wrong then you can always Flash back to 2.3 through odin and be back up and running again.
Hope this helps.
Sent from my GT-I9300 using xda premium

Great mate, nice to see someone helpful instead of the usual "get lost n00b" crap!
Everyone had to start somewhere!
Is there a CWM flashable easy root, as there is on galaxy ace, i found it much easier and less daunting than odin?
NeatROM -The Best!

@ Nick Fury
Thanks mate - your attitude & info much appreciated. Whilst I am a noob with the S2 - I had a lot of experience of ROM'ing the Desire.
I dont want to f**k this up - hence the questions
I'll research it out more.
Cheers

[UPDATED][INFO] ROM 101 + CWM Errors Solutions

Parts of a ROM
i. The kernel.
Android (like many other Smartphone operating systems) runs on the Linux kernel. The Linux kernel was created in the early 1990’s by a gentleman named Linus Torvalds in Helsinki, Finland. It’s incredibly stable, incredibly friendly, and incredibly difficult for the layman to understand and modify. Thankfully it’s also very popular so it has been ported on to a multitude of hardware, including our Android devices.
Think of the kernel as an interface layer between the hardware and software on your device. The kernel decides when things happen, such as the LED indicator gets lit or when the soft button's LED gets lit. An application sends a request to the operating system to blink the LED. The operating system then sends the request to the kernel, which makes the light flash for the amount of time requested by the OS.
What sounds like a round-about way to get things done is also what makes the system so scalable and robust. Application developers only have to code in a way the operating system understands and the kernel makes it work on the hardware. This also keeps the application running in it’s own user-space and separate from the kernel. That means when you run the latest uber-cool app that wasn’t designed for your particular OS version, or is still very beta and it crashes, the kernel gives you the option to Force Close the application and the kernel can run untouched.
In a standard Android ROM (we will leave developer images and the like for another discussion) the kernel is bundled along with a set of instructions that tell the device how to load the kernel and the OS during boot. This is the boot.img that you see inside a zipped ROM that your not able to easily open. The device knows to extract this image to internal memory (the ramdisk) and follow a series of scripts (init scripts) to load the kernel and then the other portions of the OS. That’s what’s happening while you’re watching the boot animation. Interestingly enough this is done the same way for a PC, your smartphone, an Android tablet, or even a smart Linux powered toaster. If you’re feeling exceptionally geeky, plug your Android phone into the USB port on your PC and let the PC boot from the USB device. No, it doesn’t actually load, but you can watch the animation while it tries to match up the hardware support with what’s inside your PC. As I said, Linux is amazingly scalable and as a result so is Android.
What is a kernel? If you spend any time reading Android forums, blogs, how-to posts or online discussion you'll soon hear people talking about the kernel. A kernel isn't something unique to Android -- iOS and MacOS have one, Windows has one, BlackBerry's QNX has one, in fact all high level operating systems have one. The one we're interested in is Linux, as it's the one Android uses. Let's try to break down what it is and what it does.
Android devices use the Linux kernel, but it's not the exact same kernel other Linux-based operating systems use. There's a lot of Android specific code built in, and Google's Android kernel maintainers have their work cut out for them. OEMs have to contribute as well, because they need to develop hardware drivers for the parts they're using for the kernel version they're using. This is why it takes a while for independent Android developers and hackers to port new versions to older devices and get everything working. Drivers written to work with the Gingerbread kernel on a phone won't necessarily work with the Ice Cream Sandwich kernel. And that's important, because one of the kernel's main functions is to control the hardware. It's a whole lot of source code, with more options while building it than you can imagine, but in the end it's just the intermediary between the hardware and the software.
When software needs the hardware to do anything, it sends a request to the kernel. And when we say anything, we mean anything. From the brightness of the screen, to the volume level, to initiating a call through the radio, even what's drawn on the display is ultimately controlled by the kernel. For example -- when you tap the search button on your phone, you tell the software to open the search application. What happens is that you touched a certain point on the digitizer, which tells the software that you've touched the screen at those coordinates. The software knows that when that particular spot is touched, the search dialog is supposed to open. The kernel is what tells the digitizer to look (or listen, events are "listened" for) for touches, helps figure out where you touched, and tells the system you touched it. In turn, when the system receives a touch event at a specific point from the kernel (through the driver) it knows what to draw on your screen. Both the hardware and the software communicate both ways with the kernel, and that's how your phone knows when to do something. Input from one side is sent as output to the other, whether it's you playing Angry Birds, or connecting to your car's Bluetooth.
It sounds complicated, and it is. But it's also pretty standard computer logic -- there's an action of some sort generated for every event. Without the kernel to accept and send information, developers would have to write code for every single event for every single piece of hardware in your device. With the kernel, all they have to do is communicate with it through the Android system API's, and hardware developers only have to make the device hardware communicate with the kernel. The good thing is that you don't need to know exactly how or why the kernel does what it does, just understanding that it's the go-between from software to hardware gives you a pretty good grasp of what's happening under the glass. Sort of gives a whole new outlook towards those fellows who stay up all night to work on kernels for your phone, doesn't it?
Click to expand...
Click to collapse
ii. The operating system.
Once the kernel is loaded, the init scripts tell the Operating System to load. Android is the user interface for a custom built Java virtual machine called Dalvik. Dalvik was written by Dan Bornstein, who named it after the fishing village of Dalvik in Iceland, where his family originated from. The debate of which Java VM is superior is best left for another discussion, so I’ll simply say that DalvikVM is a register-based machine versus true JavaVMs which are stack based.
The Dalvik machine creates executable files (.dex files) which can be interpreted by the OS and run by the end user. These .dex files are OS version dependant. That simply means that applications and core functions built to work with one version of Android may or may not work well with other versions. Google provides the tools through it’s Software Development Kit (SDK) for applications to communicate with the OS.
Click to expand...
Click to collapse
iii. Core functions.
No smartphone would be complete without a set of functions that allow the device to be used as intended. Things like the phone and dialer interface, the calendar, the messaging system are core functions of the Operating System. In Android, these are run on top of the kernel as separate applications. The merits (or lack of) of providing these needed functions as separate applications is once again best left for another discussion, but this is what allows developers like HTC or Motorola to replace the standard functions with alternatives that provide a different look and feel from stock. HTC’s onscreen keyboard or Motorola’s MotoBlur contact list are great examples of this. The “little guy” isn’t left out of the mix either. Handcent SMS or Chomp SMS can integrate into the OS very well, as most of us already know.
An additional set of Core Functions are provided by Google. Popularly called GoogleBits, things like Gmail, sync, Gtalk and the Android Market are applications written by Google that give an extra set of useful functions to the OS. You’ll find these on all smartphones, as well as many other Android devices.
Click to expand...
Click to collapse
iv. Optional applications.
These are applications provided by the manufacturer to give the device even more usability. Things like the Amazon MP3 store, PDF readers, Corporate Calendar etc. allow you to do even more with your device. Remember - Droid Does
Click to expand...
Click to collapse
B. How is a ROM packaged?
In most cases a ROM will come packaged in a .zip file. The recovery image’s kernel (yes, it has one too!) has the ability to unzip and copy the contents into the correct place. Inside this zip file is a folder (META-INF\com\google\android\) that contains a script prepared by the ROM “cooker” (another of those techie terms - it means the person(s) who developed the ROM) that tells the system what to format, what to copy and where, and any file operations that need to be done. Each device does things a bit differently, but this script is where it all gets done. More on this folder later.
You’ll also see a /system folder. This is the meat of the ROM. It has the necessary OS files, the Core functions, and any optional applications the cooker decided to include. The folder is structured the same way it is on your device - /system/app, /system/framework, etc. The whole tree is usually copied over and the existing /system folder is overwritten. The cooker uses the script to tell the kernel to erase the existing system folder, copy the new folder over, and set the file permissions.
Sometimes you will also see a data folder. This usually is space set up for optional applications, including optional system tools like busybox or SuperUser white list. These applications could be placed in the /system folder, but placing them in the data folder makes it easier for the end user (you and I) to remove or update them as needed.
You’ll also notice a META-INF folder. This contains the update script we talked about earlier, as well as secure keys that need to be provided so the device knows the update can be trusted. A special note needs made here. Trusted means that the update is trusted to be in the correct form to load the device. It in no way means the ROM is safe from malicious code. Anyone is able to use a set of test keys and create a ROM that will flash and run your device - even those people with bad intentions. Flashing and running a custom 3rd party ROM is putting faith in the cooker that he or she not only knows what they are doing, but are honest as well. Also, some Motorola custom ROMs will have a small update.zip stored inside this folder to be run on first boot of the device.
Finally we are left with the boot.img file. This is the kernel and ramdisk image we discussed earlier. Your phone copies this over to be decompressed and run when the device boots.
Click to expand...
Click to collapse
2. How do I install a ROM?
In this section we’re discussing how to install a custom 3rd party ROM. ROMs from the manufacturer usually have a utility that runs on your PC to flash and load the new image.
A. Got Root???
What is Root?
Android rooting is the process of allowing users of smartphones, tablets, and other devices running the Android mobile operating system to attain privileged control (known as "root access") within Android's subsystem.
Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user. On Android, rooting can also facilitate the complete removal and replacement of the device's operating system, usually with a more recent release of its current operating system.
As Android derives from the Linux kernel, rooting an Android device is similar to accessing administrative permissions on Linux or any other Unix-like operating system such as FreeBSD or OS X.
The process of rooting varies widely by device, but usually includes exploiting a security bug(s) in the firmware (i.e. in Android) of the device, and then copying the su binary to a location in the current process's PATH (e.g. /system/xbin/su) and granting it executable permissions with the chmod command. A supervisor application like SuperUser or SuperSU can regulate and log elevated permission requests from other applications. Many guides, tutorials, and automatic processes exist for popular Android devices facilitating a fast and easy rooting process.
For example, shortly after the HTC Dream was released, it was quickly discovered that anything typed using the keyboard was being interpreted as a command in a privileged (root) shell. Although Google quickly released a patch to fix this, a signed image of the old firmware leaked, which gave users the ability to downgrade and use the original exploit to gain root access. Once an exploit is discovered, a custom recovery image that skips the digital signature check of a firmware update package can be flashed. In turn, using the custom recovery, a modified firmware update can be installed that typically includes the utilities (for example the Superuser app) needed to run apps as root.
The Google-branded Android phones, the Nexus One, Nexus S, Galaxy Nexus and Nexus 4, as well as their tablet counterparts, the Nexus 7 and Nexus 10, can be boot-loader unlocked by simply connecting the device to a computer while in boot-loader mode and running the Fastboot program with the command "fastboot oem unlock".[9] After accepting a warning, the boot-loader is unlocked, so a new system image can be written directly to flash without the need for an exploit.
Recently, Motorola, LG Electronics and HTC added security features to their devices at the hardware level in an attempt to prevent users from rooting retail Android devices.[citation needed] For instance, the Motorola Droid X has a security boot-loader that puts the phone in "recovery mode" if a user loads unsigned firmware onto the device, and the Samsung Galaxy S II displays a yellow triangle indicator if the device firmware has been modified.
Click to expand...
Click to collapse
Yes ?:good:!!!
Custom ROM’s simply will not load on devices that aren’t rooted. In theory, it may be possible to sign a 3rd party ROM with the keys that the stock recovery image will flash, but for the most part you need to have flashed a custom recovery image before you can change your device’s ROM. Instructions and tutorials on how to root your device are all over the internet. Some are good, some are bad. The hacking forum is a great place to go and learn more about rooting and how to successfully get it done on your device.
Click to expand...
Click to collapse
B. Recovery
Most Android devices have had a custom recovery image written for them. This will overwrite the stock recovery image, allowing you to flash 3rd party ROMs as well as giving extra functionality. Help with finding and flashing the custom recovery image for your device can also be found in the hacking forum. The installation of a custom recovery image also allows for a very important function. Backup and restore.
Click to expand...
Click to collapse
.C. Nandroid
Nandroid is a set of bash scripts and code written by that copies the state of your system and stores it in a folder on your SD card. You can then use the restore function of Nandroid to restore to this point at any time. This is a priceless feature and reason enough to root your phone. It’s included by default in most custom recovery images, and the code is freely available to use if you’re inclined to write your own recovery image.
Click to expand...
Click to collapse
In most situations, using Nandroid to back everything up is easy:
1. Verify you have a memory card with enough free space (~300MB to backup, ~500MB to restore).
2. Reboot your device into recovery. It’s slightly different for each device, once again hacking forum FTW!
3. Navigate through the menu and select the Nandroid Backup function.
4. Apply your choice and wait for the device to tell you it’s finished.
It’s always good practice to copy the entire nandroid folder from your SD card to a safe place. You can then copy it back to the SD card if the card is ever damaged, lost or erased.
D. Copy and Flash
You’re rooted, have downloaded a custom ROM, have your system backed up and are now ready to flash your device. This is not nearly as scary as it sounds.
1. Mount your SD card to your PC, and copy the .zip file to the root folder of the card. Don’t unzip the file, and don’t look for a folder called root. The root folder in this case means the base folder, what you will see when you mount your card to a PC or the device.
2. Reboot your phone into recovery.
3. Navigate through the recovery menu and select the flash update option. Depending on your recovery image, the file may need to be named update.zip, or you may be able to select any zip file on your card as long as it’s the correct format. The cooker knows this as well and if the ROM needs to be named update.zip it will be.
4. Apply your choice and wait for your device to tell you it’s finished.
5. Reboot.
Click to expand...
Click to collapse
It’s worth noting that many times a new ROM will require that you wipe and factory reset your devices data. While inconvenient, it’s often necessary to get rid of the old data as it may be incompatible. As long as you’re using the cloud for calendar and contacts, they will be re- downloaded and stored back on your device automatically.
Dirty flash and Clean flash
A dirty flash is only wiping cache and davlik then flashing your ROM....
a Clean flash is at LEAST factory reset/data wipe + wiping davlik(factory wipe takes care of /cache also)... Maybe doing a format /system also.

ERRORS encountered in CWM Recovery
.
What is CWM Recovery ?
ClockworkMod Recovery is a custom recovery for many Android devices. It is considered to be the most popular recovery for Android due to its easily-ported nature, and integration with ClockworkMod ROM Manager by Koush(Koushik Dutta). The easiest way to recognize it is by the printed name when it first starts, and the background logo of a gear and hat.
Click to expand...
Click to collapse
ERROR STATUS 6
This is usually caused by CR/LF EOL(Windows style End Of Line) in updater-script. Change it to LF EOL(Unix Style EOL) using Linux command: dos2unix updater-script, then re-signing the ZIP, will usually fix this error.
Click to expand...
Click to collapse
ERROR STATUS 7
This is usually caused by a corrupt download, or bad file signature. Re-downloading (or re-signing) the ZIP will usually fix this.
Click to expand...
Click to collapse
We have been consistently seen and heard people facing error “Status 7″ error while trying to flash or install
custom ROMs or firmware packages on their Android smart phones or tablets with ClockworkMod Recovery. Many
of the users are nowadays facing this problem with CWM Recovery while flashing .zip files of modded or custom
Ice Cream Sandwich (ICS) or Jelly Bean (JB) ROMs on their devices. So, you have also downloaded a custom ROM,
placed its .zip file in your phone’s or tablet’s SD card, booted into ClockworkMod Recovery, selected – “install zip
from sdcard” and then chosen the .zip file of the ROM to get it installed on your device. But instead of getting
flashed successfully, if you are facing the issue mentioned below, then just keep reading this article to find out
what’s wrong and fix up the problem :
Finding update package…
Opening update package…
Installing update…
Error in /sdcard/custom-jelly-bean-rom.zip (Status 7)
Installation aborted
Click to expand...
Click to collapse
or the following error right after CWM recovery shows –
Installing update…
assert failed: getprop(“ro.product.device”) == “I9103″ || getprop(“ro.build.product”) == “I9103″ || getprop
(“ro.product.board”) == “I9103″
Error in /sdcard/android-4-1-1-ics-rom-latest.zip (status 7)
Click to expand...
Click to collapse
So, if you are facing any of these errors while trying to install the desired custom ROM package on your Android
phone or tab, then you may try a various things or steps which may turn out to be the workaround of this
problem. Here are a few tips to get this “Status 7” error fixed in ClockworkMod Recovery and flash the ROM
successfully on your device :
(1) First of all, make sure your device’s bootloader is unlocked. If it is already unlocked but you are still
not able to flash the ROM, then just extract the .zip file of the ROM into a new folder, find the boot.img file from
that directory and flash it up on your phone or tablet via fastboot on your PC.
(2) Make sure that you are having the appropriate Radio or Baseband version installed on your device which is
supported by the custom ROM you are trying to flash. Most of the ROMs requires the latest version of Baseband, so
just update or upgrade your device to the latest Baseband version and then try to install the ROM once again.
(3) Update your device to the supported / latest build of official firmware before trying to install the ROM. You can
do it from – Settings > About Phone / Device > Software Update.
(4) Make sure you are having the supported or required kernel installed on your phone or tab. If it’s not, then flash
a new kernel right away and try to install your custom ROM once again.
(5) Is the ROM which you are trying to flash really works ? Find out whether it is working for other users or not.
Click to expand...
Click to collapse
Error Status 0
Well sometimes while flashing some ROMs especially the cooked ones we get Error status 0 in the CWM Recovery
this error is an indicator of Wrong Update Binary.This is usually caused by an incompatible update-binary in edify ZIPs. Replacing it with a compatible one, then re-signing the ZIP, will usually fix this error.
Click to expand...
Click to collapse

Now it's time for the partitions :good:
Let’s start with a list of standard internal memory partitions on Android phones and tablets. These are:
/boot
/system
/recovery
/data
/cache
/misc
In addition, there are the SD card partitions.
/sdcard
/sd-ext
Note that only /sdcard is found in all Android devices and the rest are present only in select devices. Let’s now take a look at the purpose and contents of each of these partitions.
/boot
This is the partition that enables the phone to boot, as the name suggests. It includes the kernel and the ramdisk. Without this partition, the device will simply not be able to boot. Wiping this partition from recovery should only be done if absolutely required and once done, the device must NOT be rebooted before installing a new one, which can be done by installing a ROM that includes a /boot partition.
/system
This partition basically contains the entire operating system, other than the kernel and the ramdisk. This includes the Android user interface as well as all the system applications that come pre-installed on the device. Wiping this partition will remove Android from the device without rendering it unbootable, and you will still be able to put the phone into recovery or bootloader mode to install a new ROM.
/recovery
The recovery partition can be considered as an alternative boot partition that lets you boot the device into a recovery console for performing advanced recovery and maintenance operations on it. To learn more about this partition and its contents, see the ‘About Android Recovery’ section of our guide to ClockworkMod recovery.
/data
Also called userdata, the data partition contains the user’s data – this is where your contacts, messages, settings and apps that you have installed go. Wiping this partition essentially performs a factory reset on your device, restoring it to the way it was when you first booted it, or the way it was after the last official or custom ROM installation. When you perform a wipe data/factory reset from recovery, it is this partition that you are wiping.
/cache
This is the partition where Android stores frequently accessed data and app components. Wiping the cache doesn’t effect your personal data but simply gets rid of the existing data there, which gets automatically rebuilt as you continue using the device.
/misc
This partition contains miscellaneous system settings in form of on/off switches. These settings may include CID (Carrier or Region ID), USB configuration and certain hardware settings etc. This is an important partition and if it is corrupt or missing, several of the device’s features will will not function normally.
/sdcard
This is not a partition on the internal memory of the device but rather the SD card. In terms of usage, this is your storage space to use as you see fit, to store your media, documents, ROMs etc. on it. Wiping it is perfectly safe as long as you backup all the data you require from it, to your computer first. Though several user-installed apps save their data and settings on the SD card and wiping this partition will make you lose all that data.
On devices with both an internal and an external SD card – devices like the Samsung Galaxy S and several tablets – the /sdcard partition is always used to refer to the internal SD card. For the external SD card – if present – an alternative partition is used, which differs from device to device. In case of Samsung Galaxy S series devices, it is /sdcard/sd while in many other devices, it is /sdcard2. Unlike /sdcard, no system or app data whatsoever is stored automatically on this external SD card and everything present on it has been added there by the user. You can safely wipe it after backing up any data from it that you need to save.
/sd-ext
This is not a standard Android partition, but has become popular in the custom ROM scene. It is basically an additional partition on your SD card that acts as the /data partition when used with certain ROMs that have special features called APP2SD+ or data2ext enabled. It is especially useful on devices with little internal memory allotted to the /data partition. Thus, users who want to install more programs than the internal memory allows can make this partition and use it with a custom ROM that supports this feature, to get additional storage for installing their apps. Wiping this partition is essentially the same as wiping the /data partition – you lose your contacts, SMS, market apps and settings.
With this, we conclude our tour of Android partitions. Now whenever you install a ROM or mod that requires you to wipe certain partitions before the installation, you should be in a better position to know what you’re losing and what not and thus, you’ll know what to backup and what not.
ADB-Android Debugging Bridge
Android Debug Bridge (adb) is a versatile command line tool that lets you communicate with an emulator instance or connected Android-powered device. It is a client-server program that includes three components:
A client, which runs on your development machine. You can invoke a client from a shell by issuing an adb command. Other Android tools such as the ADT plugin and DDMS also create adb clients.
A server, which runs as a background process on your development machine. The server manages communication between the client and the adb daemon running on an emulator or device.
A daemon, which runs as a background process on each emulator or device instance.
You can find the adb tool in <sdk>/platform-tools/.
When you start an adb client, the client first checks whether there is an adb server process already running. If there isn't, it starts the server process. When the server starts, it binds to local TCP port 5037 and listens for commands sent from adb clients—all adb clients use port 5037 to communicate with the adb server.
Click to expand...
Click to collapse
The server then sets up connections to all running emulator/device instances. It locates emulator/device instances by scanning odd-numbered ports in the range 5555 to 5585, the range used by emulators/devices. Where the server finds an adb daemon, it sets up a connection to that port. Note that each emulator/device instance acquires a pair of sequential ports — an even-numbered port for console connections and an odd-numbered port for adb connections. For example:
Emulator 1, console: 5554
Emulator 1, adb: 5555
Emulator 2, console: 5556
Emulator 2, adb: 5557
and so on...
As shown, the emulator instance connected to adb on port 5555 is the same as the instance whose console listens on port 5554.
Once the server has set up connections to all emulator instances, you can use adb commands to access those instances. Because the server manages connections to emulator/device instances and handles commands from multiple adb clients, you can control any emulator/device instance from any client (or from a script).
Note: When you connect a device running Android 4.2.2 or higher to your computer, the system shows a dialog asking whether to accept an RSA key that allows debugging through this computer. This security mechanism protects user devices because it ensures that USB debugging and other adb commands cannot be executed unless you're able to unlock the device and acknowledge the dialog. This requires that you have adb version 1.0.31 (available with SDK Platform-tools r16.0.1 and higher) in order to debug on a device running Android 4.2.2 or higher.
Syntax
You can issue adb commands from a command line on your development machine or from a script. The usage is:
adb [-d|-e|-s <serialNumber>] <command>
If there's only one emulator running or only one device connected, the adb command is sent to that device by default. If multiple emulators are running and/or multiple devices are attached, you need to use the -d, -e, or -s option to specify the target device to which the command should be directed.
LOGCAT
The Android logging system provides a mechanism for collecting and viewing system debug output. Logs from various applications and portions of the system are collected in a series of circular buffers, which then can be viewed and filtered by the logcat command. You can use logcat from an ADB shell to view the log messages.
-b <buffer> Loads an alternate log buffer for viewing, such as event or radio. The main buffer is used by default. See Viewing Alternative Log Buffers.
-c Clears (flushes) the entire log and exits.
-d Dumps the log to the screen and exits.
-f <filename> Writes log message output to <filename>. The default is stdout.
-g Prints the size of the specified log buffer and exits.
-n <count> Sets the maximum number of rotated logs to <count>. The default value is 4. Requires the -r option.
-r <kbytes> Rotates the log file every <kbytes> of output. The default value is 16. Requires the -f option.
-s Sets the default filter spec to silent.
-v <format> Sets the output format for log messages. The default is brief format. For a list of supported formats, see Controlling Log Output Format.

awesome thread to learn everything in a quick while

Again.? :good:
But highlight the Status error with big & bold font.

Disturbed™ said:
Again.? :good:
But highlight the Status error with big & bold font.
Click to expand...
Click to collapse
I think he's trying to take over XDA
But just to keep this on topic, great thread for those who are learning and aren't sure what certain things are for.
I guess I'll have to make another thread in this forum just so other RCs don't take all the ideas
SGS2 FAQ | HTC One FAQ

KidCarter93 said:
I think he's trying to take over XDA
But just to keep this on topic, great thread for those who are learning and aren't sure what certain things are for.
I guess I'll have to make another thread in this forum just so other RCs don't take all the ideas
SGS2 FAQ | HTC One FAQ
Click to expand...
Click to collapse
Lolzzz.. Yes buddy. He is something else.
Collecting Informations & useful stuff for all users. May be in near future, he will take over XDA.

It's all your love guys. Sometimes even my guides correct my mistakes!
Started from the bottom

Guys if you like this thread please press the tip us button so that more and more people who are willing to learn about android phone and how they work can get help.
I will be grateful to you all.
Started from the bottom

Very nice write up TechnoCrat :good::good::good:
TEAM MiK
MikROMs Since 3/13/11

Long way to go mate!
Congo! This thread got featured on XDA Portal
http://www.xda-developers.com/android/android-101-how-it-all-fits-together/

Thank you very much. I needed this definition thread. I kinda understand but it'd nice to hear official language that's understandable.
Sent from that FBI van parked down the street.

Thanks for the CWM errors write up and another bookmark.

Tha TechnoCrat said:
i. The kernel.
If you’re feeling exceptionally geeky, plug your Android phone into the USB port on your PC and let the PC boot from the USB device. No, it doesn’t actually load, but you can watch the animation while it tries to match up the hardware support with what’s inside your PC
Click to expand...
Click to collapse
What. The. Hell. Are you talking about?
If you mean booting the device's kernel on the PC, unless the device uses an x86 processor, it flat out will not boot, let alone mount the device's system, to display the bootanimation.zip
/snarkieness
Sorry, I had to let that out.
Also, init is called/started after the kernel has started, and generally after it has setup most of the hardware.
so I’ll simply say that DalvikVM is a register-based machine versus true JavaVMs which are stack based.
Click to expand...
Click to collapse
I don't even truly understand that, so could add a little more detail, or remove it?
I'm speaking mostly from my implied knowledge, gained from tinkering with android/linux for a few years.

ADB and Logcat added

Hey, Thanks for the article. Can you talk about root? There is some mis-leading information and I really want to learn about it. Thanks again.

ak700 said:
Hey, Thanks for the article. Can you talk about root? There is some mis-leading information and I really want to learn about it. Thanks again.
Click to expand...
Click to collapse
Okay buddy
Editone! !!
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"

Bump to update newbies
"Thanks button is just to avoid "THANKS" posts in threads. Nothing more than that. Don't ask in signature or post for it and defeat the purpose why it was introduced"

[REF] Understanding the basics before rooting your S3 (GT-i9300/i9305)

Note from the Author -
I am moving on to the N5 now and ditching my S3. I will continue to maintain this thread, however - please do PM me if you think that something needs to be changed or updated in this thread as I doubt I will be answering questions within the thread as much. Please don't PM support questions to me. Only PM updates that need to be made in the thread.
It's been a blast!
Regards
Dan
efs | backup your efs | backup your efs | backup your efs | backup your efs | backup your
Understanding the basics before rooting your S3 (GT-i9300/i9305)
This thread is intended to give you (as someone considering rooting your device) an overview of some of what I deem to be, really important information. Many people blindly follow guides and end up in trouble because they break their phones and don't really know what they were even doing at the time.
This may seem a bit overwhelming at first, there is a lot of text, but please do take the time to read it. It may save you further down the line.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before we get started...
Here are a couple of threads you should get familiar with before posting on XDA.
Forum Rules - use Search before posting
Post Questions or Support queries in Q&A, NOT General
What is root access?
"root" is (but not exclusively) a Linux term. As you may or may not know, Android is based on a Linux Kernel.
The term "root" refers to the root of the device. All devices with an operating system use a series of directories (or folders) nested within one another. If you think of windows, your documents folder would be C:\users\username\documents.. Well, "documents" is a directory. It is within another directory (username).
Imagine "documents" being the top of a tree (A folder tree). You climb down the tree to username, past there to "users" and down to the root, in this example "c:". You cannot go beyond this level, because nothing exists beyond the root. To save a file directly on C: (not within any folders) would be to save a file to the root of your c: drive.
In Linux (unlike Windows), these root locations are completely locked down. A user of normal priviledges cannot edit any file or create files in these locations. They can only do this in their "home" location, which is the equivelant of username on windows. To gain access to these locations, you would need to be an administrator of the machine. Linux calls this Super User (su), and this user is said to have "root access".
This applies to Android in the same way. To root your Android device, is to have superuser access to the root locations of your phone, that you normally could not have access to.
Is it Risky?
There is always a risk having access to locations on your phone that are supposed to be locked down. You can easily delete things that your phone needs to boot up, which could lead to you losing all your data or even breaking your phone. This is why it is good have an understanding of your device and root access BEFORE you root.
It is worth noting that although many say rooting shouldn't void your warranty (it does in many places) even where that is supposed to be true, in practice, it isn't really. Even in the EU, I've seen many warranty claims rejected due to root so do think of your phone as out of warranty when you root.
The advantages of rooting
Why root?
More control over how the CPU acts. This can increase performance or battery life
More control over power consumption (undervolting)
More control over how apps start up. Prevent apps from starting up when they don't need to
Baseband. Try different basebands with the possibility of reducing drain or imporving signal strength
De-bloat. Remove or freeze system apps that you don't use
Access to community driven bug fixes that Samsung haven't released
Custom ROMs. Add additional functionality and controls over and above the stock experience
Increase redundancy. The ability to backup apps and entire phone
Theme. Don't be stuck with Samsung driving aesthetics.
Innovations. Use community driven features that improve your day to day experience
Better RAM management. Change the values of "Out of memory". Decide yourself when android should kill unused apps. Increase mutlitasking capabilities
Custom kernels. With kernels you can bring support for better audio features, better graphics performance and support for stock unsupported files systems
Google Android. Use android as it was intended before Samsung got their hands on it.
The Disadvantages of rooting
Why not root?
For all intents and purposes, rooting voids warranty.
Dangerous. You can break your phone and need the warranty you probably just voided
You open the doors for more mistakes. These mistakes may cause you to panic and further damage your phone
Lack of understanding. Blindly following guides and not understanding what you're doing.
No more official updates. Updating is a more manual process
Basic layout of /root on the GT-i9300
I'm not going to go into too much detail here. I just need you to know the basics. The GT-i9300 has an embedded Multi Media Card. This is the internal memory that everything on your phone you need to run it, is insalled on. It is the "internal memory" of the device.
Like windows and linux, there is a root to this memory, which has a few basic partitions that you need to know.
/efs - This is REALLY important. This is where your IMEI is stored, which you need to connect to your provider's network. Unfortunately it is the easiest partition to corrupt and impossible to restore without a backup so ensure you have a recovery or application to backup your efs cause if it goes (likely) you'll be sending your S3 to Samsung for repair.
Please read THIS THREAD for more info on EFS and IMEI issues.
/system - This is where the ROM is installed. Within /system are many important folders that you normally cannot get to.
For example, you have /system/app where all the important ROM apps are located. Things like the phone app and the messaging app. /system/bin, where all the important binaries are located that allow android to execute commands that it needs to, so it can function as an OS and /system/framework, where the crucial policies that control how things the user and processes interact with - act.
/data - This is where apps you install are kept. This is also where your data is kept, eg your SMS and e-mails. It also stores settings. If you change the wallpaper, it is stored here. What ringtone you have chosen... etc. The important directories here are /data/app and /data/data. These are what get wiped when you choose to wipe data\factory reset
/data/media is an important directory in /data. This is what is known as your "internal storage" or your "internal sdcard". /sdcard maps to here.
When you have root access to android, you can browse these partitions with a root explorer / file manager with root functionality.
There are also some hidden partitions you cannot browse like this. These are the partitions that contain recovery, bootloader and kernel
What are those things?
Kernel - This is always supplied with a ROM. It is the beating heart of Android. The ROM cannot function without the kernel. Since all ROMs include a kernel, if you're using a custom Kernel then flash a ROM, you will need to reflash the kernel again.
Please note, unlike the Galaxy S2 (and like almost every other modern android device) the kernel and recovery are independent. There is no link between recovery and kernel. Kernels are boot.img files.
Bootloader - this is what handles what you boot into. When you see the black Galaxy s III text, thats the bootloader. Its job is to handle the boot. It is responsible for booting into android, or if you manipulate the buttons in a certain way, it will boot into recovery or download mode. PLEASE NOTE, i9300/5 Bootloader is NOT LOCKED. DO NOT TRY TO UNLOCK IT. Only some US variants have a locked bootloader...
When you see this screen, you're looking at the bootloader:
Download mode is part of the bootloader itself. Again, it is a mini OS. It is designed for flashing stock (official) ROMs onto the phone (Which you can do using Odin). It is also used by Samsung to detect the status of your phone (if you have modified it or not).
If you have (or had before rooting) an official ROM above 4.1.1, Your bootloader flash counter in download mode will change to "1" at every boot, if you have a custom kernel or recovery - even if you reset it with Triangle Away. See the return for warranty link later in this post to get around this.
To access download mode, turn off your phone. Home volume down + home then press power. You will get to the screen below:
Press volume up to continue into Download mode:
Recovery - a secondary, min operating system designed to offer a few "drastic" options to recover when you cannot boot into android. For example, factory reset. Recovery isn't part of android. It is a seperate operting system. You can either boot into android or boot into reocvery.
To access recovery (custom or stock), turn of you phone. Hold volume up + home then press power.
The intial use of Stock recovery was to allow a user whose phone does not boot, to wipe their device to "recover" it to a booting state. It could also flash official updates from the sdcard. Custom recoveries do so much more, such as allowing you to flash custom rom.zip or kernel.zips from sdcard or backing up your device with a nandroid recovery.
Here is an example of a custom recovery (Philx Touch 5):
Please note, unlike the Galaxy S2 (and like almost every other modern android device) the kernel and recovery are independent. There is no link between recovery and kernel.
Some other stuff you may have heard about
Baseband / Modem / Radio - This is the software that manages your connection to wireless networks, be that voice or data. Unlike unrooted users, you can download and flash any number of i9300 (Versions for other models WILL BRICK YOUR PHONE) or i9305 radios pulled from official ROMs. I wouldn't waste too much time on them. Usually what your official ROM comes with in your country / for your carrier, is the most optimised for you. Try a few by all means but don't waste time testing every last one.
Be aware that Samsung official ROMs come with a baseband. Often this means Samsung based custom ROMs may also do so. Some ROMs which install using the Aroma installer (A kind of set-up wizard) may give the option to not flash the baseband. AOSP ROMs almost never come with a baseband. When you flash a ROM withotu a baseband, the previous baseband remains. You can by all means, mix and match ROMs and basebands. You are not tied to the baseband with the same build number as the ROM. For example, if you are on XXEMB1 ROM, you definitely do NOT have to stay on the XXEMB1 baseband.
RIL - RIL is Radio Interface layer. It's what sits between the radio (above) and the android telephony services. Each Radio is supposed to have a specific RIL. Every ROM comes with RIL as it's a requirement to function. Again, although the best pair is a matched RIL and Radio version, if you do change your Radio, it's not the end of the world. You may notice a little difference flashing the right one, but it's not something to get bogged down with. Personally, I very rarely try a new Radio. I almost never change my RIL.
It's worth mentioning that the above is only really valid for Touchwiz ROMs. AOSP ROMs use OpenRIL and are not compatible with Samsung RILs. Do not use apps like GetRIL or flash Modem+RIL packages on AOSP ROMs. You would have to reflash the ROM if you do this because using a Samsung RIL on your AOSP ROM will likely break your signal.
Also note, Nandroid backups generally don't backup the Radio. Some recoveries may give you a separate option to do so however. The RIL (as part of the ROM itself) is backed up in a Nandroid.
ROM - ROM really stands for "Read Only Memory" which refers to memory that cannot be overwritten. When we talk about an Android ROM, we are really talking about the Android OS which is installed ON the Read Only Memory, of course since rooting, the /system partition where the ROM is installed is no longer read only. It is read / write. Flashing a ROM will over write the entire /system partition with whatever is in the ROM.zip or ROM.tar. Any mods, scripts, themes or apps will be replaced. You can only have one ROM at a time, unless you use one of those funky dual boot kernels.
More advanced layout of the GT-i9300
Here we have a lovely MS paint diagram of the eMMC layout of the GT-i9300/5. Some of this you don't need to know, some of it you do.
1 BOTA0 - mmcblk0p1 - 4 MB
2 BOTA1 - mmcblk0p2 - 4 MB
3 EFS - mmcblk0p3 - 19.7M
4 PARAM - mmcblk0p4 - 8 MB
5 BOOT - mmcblk0p5 - 8 MB
6 RECOVERY - mmcblk0p6 - 8 MB
7 RADIO - mmcblk0p7 - 33 MB
8 CACHE - mmcblk0p8 - 1 GB
9 SYSTEM - mmcblk0p9 - 1.48 GB
10 HIDDEN - mmcblk0p10 - 587 MB
11 OTA - mmcblk0p11 - 8 MB
12 USERDATA - mmcblk0p12 - 11.4 GB
The above sizes are approximate and the diagram is not to scale.
Rooting the phone
When you go through the process of rooting the phone, you have to alter the ROM. Although the risks of this are very minimal, we couldn't technically say it was risk free. The process of rooting puts a binary (called "su") in /system/bin (remember we talked about that earlier?). This binary is what allows the user (you) to run things at an elevated privilidge (super user). That in itself would be quite risky, so rooting also gives you one of the superuser apps (there are 2 - SuperSU and SuperUser, both very good). These apps install to /system/app and act as a gateway. Essentially, these apps prompt you when another application wants "root access" so you can allow it or deny it. It's a form of protection against malicious intent.
Root is often enough for most people who simply want to run a few root apps, but many people will need to replace their stock recovery with a custom recovery. This is because you cannot flash custom roms from the stock recovery. Some methods of rooting give you root AND recovery. Some just give you root, but you can flash a recovery yourself using Odin and download mode. Technically you do not need root to flash a recovery and then flash a custom ROM as the rom will include /system/bin/su and /system/app/SuperSU anyway.
Odin is a useful Windows tool. You'll be using this to return your phone back to stock too by flashing a stock "firmware"
Please read Samsung Galaxy S3 General Sticky Roll-Up Thread ***Stickies found here!** to find all the rooting and flashing guides you need for the GT-i9300
If I were asked my opinion on how to root, I would recommend one of the 2 scenarios.
1) You want root only. No custom ROMs, kernels etc. Just root, just to use root apps.
CF Auto Root Via Odin
Why? Tried and tested method, simple to use. No need to choose what exploit you want to use as it's tailored for your device.
What does it do? It gives you a stock recovery (so can't flash things) and roots the Android OS
The Steps:
1) Download the Latest Odin
2) Download CF-Auto-Root for your model
3) Follow These steps to root
2) You want to flash custom ROMs / Kernels
If you want root on your existing Android ROM, you can do 1) first. Then flash a recovery of your choice (CWM, Philz, TWRP) via Odin
However, if you immediately plan on flashing a ROM, there's no need to root your existing ROM. Simply skip straight to installing a recovery. Backup then flash what you like.
The Steps:
1) Download the Latest Odin
2) Download recovery of your choice CWM, Philz, TWRP
3) Follow The steps to Flash Philz recovery (But for the recovery of your choice)
These steps can also be followed to update recovery to newer versions

Official Updates
Once you have rooted your phone, the phone is classed as "modified" and no longer qualifies for Official Samsung OTA updates.
It is possible to receive official updates (whilst rooted) via Kies, however this will remove root (just like flashing a full stock rom) and if you have any custom themes, kernels or /system modifications, this could really cause some problems to the ROM so it is best to avoid. Of course if you have flashed a custom ROM (even TouchWiz based ones) Official updates are a big, fat No-No.
If you do run custom ROMs, it's best to use their OTA method if they have one, or download from the threads on XDA and flash via recovery.
Flashing - Good practice
Recovery - Custom recoveries are very handy tools. Unlike the stock recovery, they have lots of options. Not only do they allow you to flash custom ROMs, but you can backup your current ROM too. This is called a Nandroid backup. Its a snapshot in time. It backs up your entire device, from the ROM to the Kernel and all your data too. If you restore a nandroid backup, your device will be extactly the same as it was when you took the backup. This means if you took a backup 2 weeks ago and restored it today, you could have lost 2 weeks worth of SMS.. but it is very handy. As soon as you have a custom recovery, a Nandroid backup should be the FIRST thing you do. You should take one before you flash any Mod, kernel, ROM or theme. It really is important, incase you manage to break your device.,
The RIGHT files - Always be careful that you know what you're flashing is for your device and you know what it is. Flashing files (ROMs, kernels etc) for other devices could BRICK your phone. Bricking means that it is beyond normal levels of repair, often meaning it needs the internal memory (which equates to the motherboard) being replaced. very expensive.
NEVER remove power - When flashing something, be it from your computer or from recovery (or mobile Odin), do NOT remove the power. It can corrupt not only what you're flashing but also what you're flashing to. If you corrupt any of your eMMC partitions, you could have Bricked the device.
Read, read and read - Read the development threads before you flash anything. Ensure you understand what you are flashing. Ensure you know the specific procedure layed out by the developer and you follow it closely. Do not ad lib. If you are unsure, ask.
DON'T PANIC - Think you've bricked your device? Dont panic. Stay calm. Dont google "unbrick S3" and flash lots of files you dont understand. There are many types of S3 "brick" (they're not bricks if you can easily recover) and many varients of the S3. Flashign these files could further break your phone and actually brick a not already bricked phone. Nothing for any other variant than the GT-i9300 should be flashed on it. The same goes for the i9305. Never flash for another model number.
Search and Ask - Unsure of something, read the stickies Samsung Galaxy S3 General Sticky Roll-Up Thread ***Stickies found here!** and do a search. Can't find your answer? Ask. It is easier for us to help you understand something before you do it than to fix something after you've broken it.
Provide details - ALWAYS tell us exactly what happened if you are requesting help. Always describe in detail what is happening.
"Flashed my phone now it doesn't work" is useless information.
"I rooted my phone 3 months ago and flashed a custom ROM. I decided today to flash ROM X from recovery Y. I booted into recovery and flashed from my internal SD card. I rebooted the phone and it is not starting up. It is looping at the boot animation" is GOOD information. We need to know What, when, how. We need to know if you followed a guide and which one (links where possible)
Backups
Backups are really important. This is how you can mitigate the risk of losing all your important data. Without these you could have to start again from scratch or worse, need to send your device for repair.
Your entire phone - Nandroid - Recovery
[*]efs - Recovery - EFS backup aapplications
[*]Your apps and data - Titanium backup
[*]SMS - SMS backup+
[*]Photos - Dropbox
[*]sdcards - FolderSync
The reason we backup is multifaceted.
A Nandroid will backup your entire phone. This is usually taken immediately before you flash a mod or a new ROM. Nandroid restores /system and /data. Usually when you flash a mod (kernel, theme, some system app or libs etc) and it causes a bootloop, a simple restore of Nandroid will return your phone as it was and booting again. In fact, you can use an advanced restore in recovery and choose ONLY to restore /system if appropriate
Titanium backup would often be done on a schedule. Every 2nd night or something, maybe once a week if you're daring. These are important for a number of reasons but the most important is if you are flashing a new ROM.
Remember earlier, we talked about all your data and apps being in /data/data and /data/app? Well, Titanium backs that up. When you flash a ROM, you have to perform a full wipe / factory reset before it will boot up properly. This is because you have settings stored in data/data for apps in /system/app that may have changed or no longer exist, or settings different to the settings in the new ROM. These are incompatibilities and these incompatibilities often will prevent a new ROM booting. Of course, a factory reset doesn't fully restore it to it's factory condition. It cannot restore the bootloader, rom, baseband etc because you overwrote these by flashing a new one.
We wipe, we install titanium and we restore all the data/apps and the /data/data related to /data/apps, but none of the data/data related to /system/apps (because that would restore the incompatibilities)
Here is how I restore using titanium backup after a wipe and flash....
Remember if your backup is on external sd, you need to point titanium to the location using preferences > backup folder location...
Go to backup / restore tab and press "click to edit filters" and deselect "system" and press the done tick icon to apply. Then from the previous backup / restore screen, go into the batch screen (another tick icon top right).
From this batch screen, select "restore missing apps with data" by pressing "run". Manually go through every app (yes, even if you have 300 apps) ensuring there's nothing samsung or rom specific there, unticking anything that is...
This should ensure a clean, user only app and settings. You will then need to manually set your system settings (ring tones, email etc)
Warranty
So, as we have discussed, warranty should be considered void once rooted. Technically in the EU, the OEM must prove root damaged your phone to reject warranty, however this is almost never the case.
When the S3 was released, it came with android 4.0.4 (ICS). The bootloader with ICS was normal. If you used Triangle Away once rooted, it would reset your binary counter forever. You may have kept status: Modified until you factory reset but that is not so much a problem.
When the S3 was upgraded to 4.1.1 Jelly Bean, a new bootloader was introduced. You could still reset with Triangle away, however on the next boot, if you had a custom recovery or kernel, the binary counter went back up to 1 again, which can present a problem.
Please see the following scenarios.
1) You just want root. No custom Kernels, no custom ROMs, no custom recoveries.
This is fine. If you root with CF-Auto Root it gives you a stock recovery. Once you reset the flash counter with triangle away, you should be fine.
2) You want root and recovery on a 4.1.1+ S3.
If you have a custom recovery or kernel, you can set triangle away to reset at every boot. The problem is if your phone breaks in such a way that you can never boot into android, but download and recovery mode still work, you're screwed, It goes back up to 1 on boot, fails to boot then you can only reset it with triangle away, which you can't use because it needs you to boot into Android. You see the risk?
3) You want root and recovery on a 4.1.1+ S3.
The alternative to the above is to flash This 4.0.4 bootloader via cwm. It can be reset by Triangle Away, and stays reset forever. Well why aren't we all using this? Because it is NOT SDS safe. This means if you ahev the unsafe internal memory, if you use download mode to flash anything, you risk bricking your device. Read [Important] Sudden Death Fix - Are you covered? for more information.
So it's a choice between:
I risk that under certain conditions, I may not be able to reset the binary counter for a warranty return
or
I have my binary counter at 0 always, but I cannot use download mode.
Please note, you need to run a TouchWiz ROM to use triangle away
Popular misconceptions
USB Debugging is always required for flashing.
Incorrect. USB debugging is an Android setting. It is only applicable within android. This setting does not work in recovery or download mode, so obviously anything done in those modes does not require USB debugging.
When rooting, all your data is lost.
Incorrect. Rooting adds a binary and application to your phone. It does not wipe it.
I need to root to fix my battery by wiping battery stats.
Incorrect. No one needs to wipe battery stats. Please read the wiping battery stats thread linked below:
Battery stats
What's good for you is good for me!
Incorrect. Everyone's usage is different. Everyone's set-up is different. Everyone's environment is different. There is no "Best" ROM. There is no "Best kernel for..." There is no "Most battery efficient baseband". All these things may acti differently for you than they will for me. What I like isn't what you like. Please do not create any "Best" threads.
If I ask the question "Blah blah blah for custom ROMS?", everyone will know what I am talking about
Incorrect. "Custom ROM" and "AOSP ROM" are NOT synonymous. People imagine when they ask about "Custom ROMS" that we know they really mean "AOSP ROMS". We don't. There are TouchwIz based custom ROMs too. We assume nothing.
B]I need yo be on a certain ROM to flash certain other ROMs[/b]
Incorrect. You're overwriting the ROM so why would ot matter what ROM you're overwriting?!
Important threads and resources
A list of important threads and resources...Please read ALL of these threads before rooting.
Mskip's unified toolbox(Root, drivers etc)
Index of Roms, recoveries and kernels
Guide for flashing roms, backups etc
Returning to stock for warranty
Odin flashing guide
Sammobile.com - stock firmwares
Be prepared ahead of time to fix a Brick
rootSU recommends
A few recommendations from me...
RootExplorer
Titanium Backup
Philz Recovery (CWM advanced)
Odin
Heimdall (Linux / Mac odin equivelant
That's it for now. I know this is a lot of information, but I believe this info to be the very least you should know before deciding to go ahead with rooting your S3. Please read it and read it again. Anything doesn't make sense, please ask in this thread and I will gladly help.
If any other seasoned rooters / flashers think there is something salient missing, please post her too. happy to add to it.

Glossary of terms
adb - Android Debug Bridge. This is a Windows or Linux command line tool that can be used to push files to a device, pull them, create directories. Very handy with a custom Kernel if you can't boot and need to get data from the device. This can be downloaded as part of the Android SDK or mskip's unified toolbox mentioned earlier.
AOSP - Android Open Source Project. This is google's code base. This is Android in it's pureset form. Anyone can download this code and build a ROM. It will take some work to build for a specific device however. Even Samsung start with this code at some point.
AOKP - Unofficial development team building ROMs based on AOSP accross a range of devices. AOKP stands for Android Open Kang Project. A play of the AOSP it is based on. Kang means to find / use (or even steal, although not in this case) source code.
baseband - The software responsible for controlling the radio hardware. Essential for network connectivity. Also referred to as "modem" or "radio"
bash - bash is a shell script language. Natively used in unix and linux, it can also be used within terminal emulators on android and scripts. Most mods that are scripts, use bash.
binary - a binary file is the opposite of a text file. It may contain data to be read by the OS rather than a human. It usually contains instructions on how a particular function should be handled.
binary counter - also referred to as flash counter. This is in part of the bootloader, viewed in download mode. The Binary counter increases as you flash non-stock (custom) recoveries and roms and kernels not "signed" by Samsung. The app, triangle away can help a little
boot.img - the kernel is contained within an .img file named boot.img. Not to be confised with sboot.img (bootloader)
bootloader - Bootloaders exist on almost any multi-OS bootable system. Windows has one, linux has one and android has one. It is how the device "decides" which OS to boot into. the user can manipulate hardware buttons during boot to alter which OS the bootloader boots into. It boots into Android by default but it can also boot into recovery or download mode. The bootloader is within an .img called sboot.img
brick - brick refers to a device that has been "bricked". A bricked device is beyond repair. In other words, your phone may as well be a brick, because it cant be a phone any more. A bricked device must be sent to the manufacturer / carrier / service centre for repair. You cannot repair a brick yourself. If you have something that can be repaired, it is not a true brick.
There are 2 types of brick referred to..
Soft brick, where the phone bootloops. These can sometimes be repaired, so for that reason it is not a true brick and I prefer to never use the term "Soft Brick".
Hard Brick. This is what I call a true brick. The phone cannot be repaired by a user. This of course does not extend to replacing parts. Sure, a brick can be replaced by replacing parts. It can't be fixed with external hardware or software however.
busybox - A set of tools to be added to android. Many root apps require busybox to run. It can be installed using an installer from the market. Similarly, most custom ROMs will contain busybox by default
clockwork mod - clockwork mod is a custom recovery
cfq - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
checksum - see md5 checksum
cm - abbreviation for cyanogen mod. See Cyanogen
CPU - central processing unit. This is the brains of the operation. the CPU is what translates all the instructions and processes them. This is the main "power" behind any device. The better the CPU, the faster these instructions can be processed
custom ROM - A Custom ROM can be based on Touchwiz (Samsung stock), or it can be built from AOSP code. It really just means "unofficial" and will usually contain tweaks, fixes and imporvements for your device. A Custom ROM is a complete android replacement.
cwm - abbreviation for (see) Clockwork Mod.
cyanogen - a team of developers spanning multiple devices. Probably the most famous of development teams releasing heavily modified AOSP based ROMs. If there's any AOSP ROM thread for any Android device forum, there will be credits to cyanogen in there.
dalvik-cache - Dalvik-cache is a way of optimising applications. Its a way of ensuring all the dependencies an app requires are "at hand" to speed up use. It is rebuilt at start up when wiped. A de-odexed system will have more dalvik-cache than an odexed one.
de-odex - The act of removing odex from a stock ROM. On Stock ROMs, instead of using a dalvik-cache for system apps, we use .odex files instead. Generally custom ROMs prefer de-odexed configurations as it's easier to wipe and maintain when you make changes to your system.
deadline - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
download mode - Samsung's own mode accessible via the bootloader. Hold Vul down, Home and power (from off) to boot here. Also referred to as "Odin Mode". This replaces the "fastboot mode" that most other devices have.
efs - Important partition / directory on the root of your phone. Ensures the IMEI number is present in the software. Back this up, because if it breaks, it's gone for ever. You need Samsung to repair.
eMMC - Embedded MultiMedia Card. This is like an SD card, but it's embedded in a device. the eMMC is a NAND flash memory chip which acts as internal memory (storage) on the S3.
exFAT - exFAT is a Microsoft proprietary (closed source) file system, used for media (sdcards, USB flash memory, HDD's etc). ExFAT is not natively supported in Linux and AOSP ROMs
ext - ext2, ext3 and ext4 are file systems created specifically for Linux. Our internal memory is ext (or "extended" as it is known). This can sometimes be used to refer to an ext partition, an old school method of partitioning your sdcard to link the internal ext partitions to to increase app space on low memory devices. Ext file systems cannot be read on Windows machines without special applications / drivers installed.
extSdCard - This is referring to the removable Micro SD card. Samsung ROMs mount the rremovable sd card in Android as /extSdCard. Recoveries such as CWM will mount it as external_sd. Both of these terms are valid, but it depends if the phone is booted to Android or Recovery. In AOSP ROMs, the removable SD card is often mounted as /sdcard1
FAT32 - another file system which is quite old now but still a good one. This is the only file system that is compatible with all devices unconditionally. The downfall is a maximum file size limit of 4 GB. Windows disk management GUI can only format up to 32 GB. Windows command lien tool "diskpart" can format up to the max volume size of 2 TB, as can many 3rd party tools such as easeus.
flash - Flash means a few things. It can refer to the fact that our internal memory is NAND Flash (Solid state) memory. It can also be the act of "flashing", or "to flash", meaning to install to flash memory. This doesn't really refer to installing an .apk. Rather, it refers to bigger, OS, System or device wide altering modifications (Kernels, recoveries, ROMs etc). Always back up before flashing.
Custom ROMS are usually flashed from your SDcard via recovery, as are kernels and basebands however, kernels and basebands usually can come in .tar format which means odin/mobile odin can flash them too from your computer/sdcard respectively. Rule of thumb, .zip from sdcard via recovery. .tar from sdcard via mobile odin or from computer using odin
flash counter - See binary counter
framework - The android frameworks are a standard structure within android that the OS is built around. It determines things like policy (how the OS should manage an event). It controls everything from notification behaviours to the theme. Anything visual within Android with exception to the notification area is controlled by framework-res-apk. AOSP and most manufactured ROMs only have 1 frsamework-res, however Samsugn Touchwiz ROMs alsu have a twframework-res.apk for Samsung only visuals.
gapps - Google Apps (gapps). AOSP ROMs like Cyanogen, have been asked by google to not include the google apps packages, which are proprietary to google (meaning not open source). This means that when you download these roms, you need to flash a gapps package separately. They are usually available as link in the ROM thread
governor - governors are included with kernels. I will not go into too much detail but essentially, the governor is a set of instructions which tell the kernel how to manage the CPU. It can control when the CPU ramps up or down, or how long it stays at a certain frequency. Most custom kernels come with a selection of governors to choose from using things like Set CPU. The governor settings for each can also be fine tuned or tweaked to y7our liking.
hotplug - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
jig - a small usb device that plugs into the USB port of the S3. Designed to provoke "bricked" S3's to boot to download mode in an attempt to help recovery the device.
kernel - The kernel, it is said - is the "beating heart" of Android (or any OS for that matter). It sit's between the application layer (Android, applications etc) and the Hardware (CPU, Memory) and handles all transactions between the physical and the virtual. It passes information and instructions inbetween and translates. Very important stuff!
lulzactive - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
md5 checksum - md5 checksum is a way to verify that a zip (or file) is not corrupt. A developer or uploader may provide a hexidecimal string called an md5 checksum. This checksum is a test done on the files that gives it a unique string based on it's contents. If you download the file and check the checksum and it does not match, it means the contents of the file have altered, usually meaning it is corrupt and shouldn't be flashed.
An md5 checksum is easy to check on android. My preferred method is using an android terminal emulator. Lets imaging I have a file on my external sd card called "rom.zip"...
In terminal emulator, type "md5 /mnt/extSdCard/rom.zip" and the terminal will give you an md5 string, If this matches the uploader's string, you're good to go.
If you're downloading something on Windows and then transferring it to your phone, it's a good idea to check md5 on both.
Linux is pretty much the same except the command is "md5sum"
For windows: http://www.winmd5.com/
modem - see baseband
NAND - NAND is a type of Flash memory. If anyone say's "NAND" to you, they are talking about the internal memory (Storage) of your device.
nandroid - nandroid refers to a backup taken or restored via custom recoveries. This is a universal term, although nowadays most recoveries simply say "backup" or "restore", but it is a nandroid backup they will be taking or restoring, which got it's name from the NAND flash memory that Android devices use internally. Nandroids are often only compatible with the variant of recovery you have. For example, a backup taken with CWM may not be compatible with TWRP, unless they introduce a compatibility setting in the future, which Philz recovery has done.
noop - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
oem - Original Equipment Manufacturer. The OEM ROM for us is teh one the Manufacturer (Samsung) shipped with the phone.
overclock - overclocking is to set the CPU clock speed (frequency) higher than intended by the manufacturer. For example, the S3 has a 1.4 GHz (1400 MHz) maximum clock speed. With the use of a custom kernel and an application such as Set CPU, you can set this higher, to 1.6GHz or maybe even higher.
The risk is that the higher clock speed uses more voltage and voltage = heat. A higher clock with higher heat can permanently damage the CPU. Overclocking is usually paired with undervolting for these reasons. Another risk is instability. Each individual CPU has different tolerances due to imperfections in the manufacturing process. My CPU may be stable at 1.6 GHz, yet yours may be stable at a higher or lower clock. The side effects you will see here will be random reboots when the phone is under load.
pegasusq - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.
radio - see baseband
RAM - Random Access Memory. Great explanation here: http://www.androidcentral.com/ram-what-it-how-its-used-and-why-you-shouldnt-care
scheduler - built into kernels, there are schedulers to determine how CPU load is spread across different tasks. There are also read / write schedulers that spread out read and write operation priorities across the internal memory. Like Governors, there are different types of scheduler available.
sio - this is a scheduler (see scheduler). There is some info that can be read here: http://www.alliance-rom.com/community/wiki/i-o-schedulers/
stock - Imagine your phone is on a shelf in a shop. The phone is "stock" of that shop. If anything is referred to as "stock", this means standard for the device / as it was when shipped / as per factory set up. It is the opposite of custom. Some people refer to AOSP ROMs as "Stock Android". This may be the case for some phones, like the Nexus devices, but generally this is incorrect. Stock is whatever the phone came with as standard.
triangle away - an application designed to reset the binary counter. Warning, newer bootloaders (4.1.1+) now re-increment the binary counter at boot, so some trickery is required to get the counter to remain 0. This can be troublesome if you need to return for warranty.
undervolt - to undervolt is to lower the voltage used, either by the CPU or the GPU. Kernels assign a static voltage to each clock speed. For example, 200 MHz = 900 mV, 300MHz = 925 mV. Undervolting is the process of lowering this voltage staticaly for each clock speed, which potentially will save battery, although many people think it wont have much affect. Beware, undervolting too much can cause instability. When a clock frequency hasn't got enough power to sustain, the device will likely reboot or power off.
vanilla - meaning plain. Often used to refer to the "pure" android. AOSP without OEM skins, UI's and Launchers etc. The people who incorrectly use "Stock" to describe AOSP, really mean vanilla.
zzmove - this is a governor (see governor). Governors are explained in great detail here: http://www.alliance-rom.com/community/wiki/governors-explained/ - not all these governors are valid for our device, but it's a good technical read.

Every phone specific section needs something like this.
Very well done!:beer:

abaaaabbbb63 said:
Every phone specific section that can be rooted needs something like this.
Very well done!:beer:
Click to expand...
Click to collapse
Now you need the difficult part, people to actually read it.

Nice work @rootSU
Needs to be stickied and a humongous "READ ME" sticker attached! :thumbup::thumbup:
Edit........Reported©®™ so it gets stickied!

Its getting noobs to actually bother to read is the problem .
jje

True but i'll start with the "read my sig" method. At least if it's here, thats a small part of the battle. Anyone anything to add to post 1? Slappy? jje?
Sent from my GT-I9300 using Tapatalk 4 Beta

Add backup EFS first ??
jje

Some of the stickies in the roll up thread are badly out of date, you also might want to link to Mike Skip's toolbox, which reduces the chances of bricking considerably.

rootSU said:
True but i'll start with the "read my sig" method. At least if it's here, thats a small part of the battle. Anyone anything to add to post 1? Slappy? jje?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Seeing as this may well attract lots of attention, possibly add a reminder about reading the rules and link? I know it's not relevant particularly, but any chance to ram the message home is good :thumbup:

rootSU said:
True but i'll start with the "read my sig" method. At least if it's here, thats a small part of the battle. Anyone anything to add to post 1? Slappy? jje?
Sent from my GT-I9300 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Instead of [REF] you should write [BOOBS]. That would attract attention.

Added:
Link to forum rules and "post in Q&A" threads
Important links and resources
efs (in partitions)
backups

I'm sure there's still loads missing, I just can't think of much so all suggestions welcome.

Added "The advantages of rooting". Miss anything?
EDIT > added disadvantages too.

OP, I have moved your thread to the q&a section and stuck it. It is a great FAQ type thread and will serve a good purpose being stuck where people go to ask these types of questions. :good:
Towle
XDA Moderator

Towle said:
OP, I have moved your thread to the q&a section and stuck it. It is a great FAQ type thread and will serve a good purpose being stuck where people go to ask these types of questions. :good:
Towle
XDA Moderator
Click to expand...
Click to collapse
Thanks @Towle
Sent from my GT-I9300 using Tapatalk 4 Beta

I've updated the following to sections to read as below:
Bootloader - this is what handles what you boot into. When you see the black Galaxy s III text, thats the bootloader. Its job is to handle the boot. It is responsible for booting into android, or if you manipulate the buttons in a certain way, it will boot into recovery or download mode. PLEASE NOTE, i9300 Bootloader is NOT LOCKED. DO NOT TRY TO UNLOCK IT.
Download mode is part of the bootloader itself. Again, it is a mini OS. It is designed for flashing stock (official) ROMs onto the phone. It is also used by Samsung to detect the status of your phone (if you have modified it or not).
If you have an official ROM above 4.1.1, Your bootloader flash counter in download mode will change to "1" at every boot, if you have a custom kernel or recovery - even if you reset it with Triangle Away. See the return for warranty link later in this post to get around this.

oops
first i thought it was typo but after i check out dictionary i just learn a new and rare word ... teh ....:fingers-crossed:

qtwrk said:
oops
first i thought it was typo but after i check out dictionary i just learn a new and rare word ... teh ....:fingers-crossed:
Click to expand...
Click to collapse
Not new, not rare:
http://en.wikipedia.org/wiki/Teh