Hi guys,
I've been playing with PIToday for a couple of days now but I noticed one thing: My bluetooth icon on the Today screen disappeard after using PIToday. The only way to get it back for me is unchecking PIToday and soft reset. This is a bummer!
I've been checking some sites for solutions but could only find the solution mentioned above and one solutions for a 3870. This was putting a shortcut to the bluetooth icon in the startup folder. In the case of a MDA II, there is no such shortcut possible. I checked the registry and Windows directory but the is no .exe file which will start the bluetooth icon. Only .dll. But I don't know where to point it to. :?:
Any other suggestions? Because I would like to buy PIToday but I still want to access my bluetooth from the Today screen.
Wouter
Even though I am a huge fan of Pocket Informant, i experienced a lot of issues with the PI today plug in and stopped using it. It may be incompatability with other software I also have installed but as well as the missing BT icon it also caused instability (lock ups) and the occassional auto soft reset.
In regard to the missing BT icon though PI today is not the only culprit. Users of Pocket Breeze from SBSH Mobile software have reported the same issue. Only way to restore it is unselect the today plug in and soft reset.
Ed
Hi Ednap,
Somebody suggested a sort of sulution for me: Using Zenphone. In Zenphone there is an option to turn bluetooth on and off in a profile. And it seems to work!
It is not the solutions but a least it is workable.
Wouter
hi,
some kind of solution
get the tool "No Plugins today" (h**p://www.ictinus.com/NoPluginsToday/)
install it (of coz)
insert into your registry a new string like this
HKEY_LOCAL_MASCHINE\init\LaunchXX where XX is the highest number of the Launch under INIT (I use "Launch90")
enter as the stringvalue the path to the tool e.g. "\Storage\NoToday\NoPluginsToday.exe" or whereever you have installed the tool
insert a link under \Windows\startup or \windows\autostart (depends of the language) and point it again to this tool. Rename the Link in such way, that it will run last (eg. "XXXNoToday")
ok, thats all, reset your device, and enjoy your Bluetooth icon
It is not a failure by any of the Today-Plugins, which make the icon vanish, it's just a timeout of the btdll, caused by Plugins, which need too much time to initialize itself, so the icon just nor appear.
What does this thing?
after reset it removes the todayscreens, the bluetooth icon appears, and after that the notoday-tool switches the plugins on again.
you need some more time (3-4 secs) after the reset, but, who cares, you got the icon back
my2cents
Dejan
Nice work, IvkovicD!
I'll give it a try and I'll post this solution also at the PIToday forum. I'm sure this solutions is a great help for Deje the maker of the program.
B.t.w I tried SnoopSoft Dash Today Advanced today to see if I like it. It is not bad. A bit slow but guess what happens?
My headset profile is now gone! First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
To create a shortcut to Bluetooth copy the following into a shortcut file (text file with lnk extension i.e. Bluetooth.lnk):
34#\windows\ctlpnl.exe cplmain.cpl,23
and copy it across to your PPC
My headset profile is now gone!
Click to expand...
Click to collapse
Might it be that your profile is just gone from the Today screen? Check Settings>Personal Tab>Today>Items Tab and see if Profile is checked.
Hi Mark,
No. The headset profile was not there anymore in the list. I contacted Chris Scott, who makes DashToday and the only solution he had for now, was to uninstall the program.
Not realy a good option in my opinion.... Especialy because I just bought the program because there is no trial avaliable.
For your other solution:
I want to make sure that I realy understand. You want me to make a textfile and name it i.e Bluetooth.lnk. In this file there should be the line:
34#\windows\ctlpnl.exe cplmain.cpl,23
Then copy this file to my PPC and presumably to the startup directory?
Just want to make sure.
Thanks,
Wouter
Then copy this file to my PPC and presumably to the startup directory?
Click to expand...
Click to collapse
Copy it to the Start Menu folder. It won't bring back your bluetooth icon back but you will be able to access the settings from the start menu.
Thanks,
I give it a try later.
Wouter
wouterk said:
First I thought it was because I had too many Todayplugins but after removing a few and soft resetting it still wouldn't come back. Any suggestions for this one?
Thanks,
Wouter
Click to expand...
Click to collapse
Hi,
I know this effect. I've have this "vanishing", too, if I install too much today- plug ins. Just grab your favourite registryeditor and delete some build-in today-registry entries for today items, e.g. original-task, or some of the other build in ones. If you need it (I don't believe that , make a backup, but really, do you need them?)
reset your device, the missing plugs should appear again...
Sometimes, the OS just do not display some today-plugins, if there are too much entries into registry, even, if you do not activate them...maybe at MS nobody thought that someone needs more then 5 todayplugs at once...
just joking
l8er
Dejan
Hi Dejan,
Sounds like an interesting solution. Want to give it a try but I can't find the path to the right regkeys. :?: Do you know were those keys are to be found?
Wouter
Hi Dejan,
I found the reg keys. (HKLM\Software\Microsoft\Today) and deleted the Task, Calendar and Owner Info keys. Then I did a soft reset but my Bluetooth icon didn't reappear.
Too bad.
Did it work for you?
Wouter
I have an O2 xda Neo (PM300) running Windows Mobile 5 Pocket PC.
All of a sudden I noticed I no longer receive notifications or reminders of appointments or tasks on my "today" page nor any audible sounds. Even though I have:
1. Enabled sounds for reminders in "sounds & Notifications"
2.checked the "display message on screen" and "play sound" boxes in the "notifications" submenu
3.Checked the "set reminders for new items" box in the "appointments" sub menu in "options" in "calendar" (and done the same for "tasks"
My clock is correct. I have soft reset the unit a few times, I have set sample appt's and tasks and attempted to set a reminder for 5 minutes prior just to test and still nothing...
It was working fine upto maybe a couple weeks ago and just stopped working one day. I am at a loss, as the sheduling/task/appoitntment aspect is the main reason for me going the pocket pc route.
Now, I have no advance warning of tasks or appt's other than the calendar displaying the next few or so the day of or day before.
Very frustrating!
Look for Check Notifications ScaryBear Software. This program might be you solution
I had the same problem this week.
In my case it was either the (failed) installation of pocket clock or pocket max phone alarm that did it.
I loaded a previous week's sprite back-up (program part only) and that fixed the problem. I have not tried to reinstall pocket max phone alarm.
Will not reinstall pocket clock because that did not work anyways.
Robin
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
davetribe said:
I sync'd my data, did a hard memory reset, deleted that ActiveSync partnership,created a new partnership, sync'd all my data back onto my handheld and it seems to be working again!
Thanks for your suggestions!
Click to expand...
Click to collapse
I have exactly the same problem - but unfortunately cannot remember when it showed up the first time. I do not want to try a hard reset, also checking pocketmax seems that they only advise to do a lot of reinstallations. And I worry the problem will show up again later as I want to continue using phone alarm. I rather would like to change registry entries.
- Anybody has some idea what to change?
- I found an empty string value WAVEFILE in HKKLM\SOFTWARE\Microsoft\calendar\reminder - can anybody tell me their value here
- same empty value is in HKKLM\SOFTWARE\Microsoft\Tasks\reminder
Thanks Hase01
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Way2go said:
I had the exact same problem 2 weeks ago on my JAMin - suddenly noticed that I had not been receiving reminders/notifications.
I had not installed any new software, etc., to cause this, I had simply been using the PDA in the same manner as for the preceeding weeks/months.
Hase01, unfortunately the way I fixed it was with a hard reset. Why do you not want to try this? I found that once the reset had been done, it took all of 5-10 minutes to reload all the files and to reinstall the software I had previously been running. It's not that big a deal......
Click to expand...
Click to collapse
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
hase01 said:
I am not a friend of hard resets, that's why I am hesitating. And I am not sure how far I have to go back, as I was in vacation for some time and only afterwards started missing the reminders.
Could you do me a favor and let me know your registry settings for
- HKCU\ControlPanel\Notifications\Reminders
- HKCU\ControlPanel\Notifications\Sounds
- HKCU\ControlPanel\Notifications\Defaults
Do you use phone alarm?
Thanks in advance
Click to expand...
Click to collapse
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
Just download my Free Task Manager found here:
http://forum.xda-developers.com/showthread.php?t=280104
1) Launch it on your pocket pc
2) Select Notifications tab
3) First try to remove duplicates
4) Try to remove SCRIPT:0x000...
If it still doesn't work, select all of them and disable them.
Do a soft reset and create a new notification, if it works, I suggest you to enable only the necessary notifications, so those like:
CALENDAR.EXE
\Windows\calupd.exe
replog.exe
calnot.exe
clocknot.exe
and delete all [none] notifications
Cheers,
.Fred
perlmane said:
Has anyone figured this out? I am having the same problem and removing Phone Alarm does not help. I do not want to do a hard reset and start over for this. Anyone?
Click to expand...
Click to collapse
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
hase01 said:
I have solved it using alarmtoday, see my post:
http://forum.xda-developers.com/showthread.php?p=1047699#post1047699
No more problems since 3 months (knock on wood)
Regards Hase
Click to expand...
Click to collapse
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
dotfred said:
Glad to hear that... Anyway, this is another solution that works.
One of my colleagues had the same problem, about 570 notifications. We tried first to remove duplicates and SCRIP:0x000 events, but the problem remained.
After the remove he still had more than 400 notifications. So I selected them all and disabled them via TM. After soft reset we created a test notification and it worked. So as I mentioned in my previous post, we enabled back the needed notifications and we removed the rest. Now everything is fine.
I have noticed that most of the time, this problem appears when you synchronize your calendar with multiple pc's.
Click to expand...
Click to collapse
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
hase01 said:
The smart thing with the alarmtoday solution was that I did not need to take care about notifications, deletions etc. I just installed AT and all notifications came back. And btw, I usually sync only with one PC, seem to be a WM5 problem.
Click to expand...
Click to collapse
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
hase01 said:
Dotfred, could you help me.
I was not lucky - while replying to this post the problem came back again after 3 months. My Alarm today fix did not work again. Before I tried your task manager I checked my notification queue with sk-Tools: I don't have too many notifications. So - any Idea what I can do instead.
Thanks Hase
Click to expand...
Click to collapse
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
dotfred said:
I was almost in my bed!
1) Try to disable all notifications (don't worry, they are stored in the registry, so you won't lose any of them, except if you do a hard reset, or delete the reg entries).
2) Soft reset and make a test
3) if it works, just enable the notifications as mentioned in my first post until the problem is back (or not).
Cheers,
.Fred
ps.: I'm going to sleep now... it's 1:24 AM here!
Click to expand...
Click to collapse
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
hase01 said:
Thanks for late night reply - I am living in the same time zone btw
May be I have to install your task manager, sk-tools is not able to disable notifications, only delete is possible. Do you think this might help, I won't be able to install you tm before the weekend? I don't have duplicate entries and no SCRIPT:0x000.. entries.
Hase
Click to expand...
Click to collapse
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
dotfred said:
By disabling all entries, it's like cleaning the notifications database. So it will surely solve your problem (temporary anyway).
Cheers,
.Fred
Click to expand...
Click to collapse
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
hase01 said:
I tried to use you TM on my WM2003 SE ppc as I always do before I run a new program on my Qtek S200 (it's nearly impossible to deinstall a program only manual deletion of all files works). Unfortunately it does not run on my IPAQ. It starts but dies after 0.5 secs. Did you ever had this problem?
Hase
Click to expand...
Click to collapse
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
dotfred said:
You're not the first one telling me this. I don't know why it doesn't work on IPAQ with WM2003SE.
But, you can launch it on your Qtek s200 without any doubt. I already tested it myself on Qtek 2020, 9090, 9100, Mitac Scoter A701 and HTC P3600 without any problem found.
Cheers,
.Fred
Click to expand...
Click to collapse
I got the notifications back. I think it was basically repaired by installing alarmtoday again from backup. I think the problem could have been caused by the new sktools version. Strange.
B.t.w. do you need a beta tester for oyur TM on IPAQ. Then just sent me a pm
Hase
Ok. I have the same problem recently.. unsure what is the problem, but it seems that softreset *cause* (not solve) the problem, some what.. during my testing.
Anyway, I tried a few solutions listed, and the easy one is to use the TaskManager (freeware) to find the notification with 'Status' is in 'signalled'. These are passed notifications and it seems that these are causing the problem. As soon as I've removed them, the problem seems to have solved.
Then, I tested it again, by removing the 'Init_tray' from the startup and do a softreset. I tried it again, and it doesn't work. I check again on Task Manager, those 'signalled' stuff are back.
Yi folks,
Somhow my telephone numbers don't format ok anymore. I droped my Magican on a conreate floor and it instantly resetted to defaults.
After putting a backup back i can't get my number formating okay.
if try to dial 1234 i get 1(234)567-89 No matter what language setting i choose.. realy strange.
I would like to have NO formating just the numbers. 12346789
Maybe sombody knows how i could edit this in my registry or fix this.
Many thanks in advance
by language settings do you mean regional settings which is the setting responsible for number, date formatting.
Use attached program before something like that happens again.
And use it every week ;O)
Only for Wm2003se and lower.
The scheduling and battery monitor is disabled (dll´s missing)
ps: hope this is abandonware by now....
zerimar said:
by language settings do you mean regional settings which is the setting responsible for number, date formatting.
Click to expand...
Click to collapse
Yes thats the option i tryed to use.. but it din't do a thing.. somehow its disabled by my hard-reset-restore-spdbackup
tweakradje said:
Use attached program before something like that happens again.
And use it every week ;O)
Only for Wm2003se and lower.
The scheduling and battery monitor is disabled (dll´s missing)
ps: hope this is abandonware by now....
Click to expand...
Click to collapse
Thanks for the aplication. I am not sure how this would fix my number formating ? I use SPD backup to create a backup at 4.00am. But my backups seem to contain the number formating error also.
OK. The disadvantage of automated daily backup.
Do you have smartdial installed?
Do you see this format in your contacts also?
Goto options in contacts menu tools and check these settings.
For smartdial I don´t use it (to bulky) . I use a customized version of
celedial.
Also check your hkcu\controlpanel\phone\features dword.
Mine is hex: 4DFD8 but that is not standard.
Cheers
tweakradje said:
OK. The disadvantage of automated daily backup.
Do you have smartdial installed?
Do you see this format in your contacts also?
Goto options in contacts menu tools and check these settings.
For smartdial I don´t use it (to bulky) . I use a customized version of
celedial.
Also check your hkcu\controlpanel\phone\features dword.
Mine is hex: 4DFD8 but that is not standard.
Cheers
Click to expand...
Click to collapse
Q: Do you have smartdial installed?
A: No
Q: Do you see this format in your contacts also?
A: No
Also check your hkcu\controlpanel\phone\features dword.
Mine is hex: 4DFD8 but that is not standard.
No clue what it should be
I use the standard wm2001se dialer
How about a hklm\Software\Microsoft\DialParser\OEM-DLL string?
Present?
Dunno anymore :O(
default features dword:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"Features"=dword:C7D8
Cheers
tweakradje said:
How about a hklm\Software\Microsoft\DialParser\OEM-DLL string?
Present?
Dunno anymore :O(
default features dword:
[HKEY_CURRENT_USER\ControlPanel\Phone]
"Features"=dword:C7D8
Cheers
Click to expand...
Click to collapse
The first key i don't have the second is Idd C7D8
I have removed it properly - the issue is phone is still running the app and it's active regardless of removal of app and soft reset I did afterward.
Can someone recommend some cleaner or some registry key I can tweak around to get rid of this app?
Thanks all!
Yes please can somebody answer this question? I didnt like it and I wanted to delete it since it wasnt funtioning correctly. It actually zooms everything on my phone like phone calls in progress screens. Zooomer is completely and properly removed but functionality is still active. I dont want to.hard reset. Its driving me crazy. Help anyone?
a4_h23 said:
Yes please can somebody answer this question? I didnt like it and I wanted to delete it since it wasnt funtioning correctly. It actually zooms everything on my phone like phone calls in progress screens. Zooomer is completely and properly removed but functionality is still active. I dont want to.hard reset. Its driving me crazy. Help anyone?
Click to expand...
Click to collapse
Not sure what registry values have been changed - but hard reset may be the only way out...
eenbox said:
Not sure what registry values have been changed - but hard reset may be the only way out...
Click to expand...
Click to collapse
Yes, I hard reset. Now it's fine. I'm just went with adding zoom with BSB tweaks. That worked better for me.
If I'm not mistaken, zoomer edits reg values only - HD2 already has the capability to zoom any app - it depends on the registry setting to turn it on or off.
See this post:
http://forum.xda-developers.com/showthread.php?t=586150
a4_h23 said:
Yes, I hard reset. Now it's fine. I'm just went with adding zoom with BSB tweaks. That worked better for me.
Click to expand...
Click to collapse
I'd REALLY like to just fix the registry rather than hard reset........sooooooooooo many programs to reinstall! Ugh!
There's a reason I have Sprite Backup.