Database Users

Path for Device Lock in PPC WM5?

Hi all. I'm trying to assign a button to "Device Lock" for my PPC (HTC P3600) and cannot find it in the PPC? You know, the button that locks the device keypad. I current have the Device Lock plugin that i am . I looked for it in Windows folder but had no luck. Maybe I am missing something. Can someone please tell me the path? Thanks.

Never mind. I downloaded the Device Lock.cab

Default HTC Device Lock path???
Actually Device Lock.cab from someone does not work sometimes. So, does anyone knows the path for the default HTC Device lock path in the Device? I looked in Windows folder but had no luck finding it. Can someone please tell me where is the path for it? You know. when you want to lock the button of the device you click that and then an option to unlock shows and then I have to click the screen to confirm unlock. So, I am looking the path for it? Thank you.

bluetooth not working

my bluetooth wont turn on, says somthing about BTmanager not a valid aplication! any ideas how to rectify this issue?

Bump, this is stressing me out now!?

what rom version are you using? have you altered any reg settings or installed tweaking applications? btmanager not a valid win32 app may be caused by a hardware error as well.
what i'd try first = soft reset + check again > hard reset + check again > remove and add bt devices again + check again.

mole83 said:
my bluetooth wont turn on, says somthing about BTmanager not a valid aplication! any ideas how to rectify this issue?
Click to expand...
Click to collapse
did you install tom tom?

Hi,
Yes I have installed TomTom and now have this issue.
Do you know a fix?
Of course, I would like to keep TomTom
** P.S ** Appologies for digging up an old thread.
Mike

With the help of Google, I found the fix, please see below:
This Fix also works on the HTC HD2. (HTC Leo)
Although I could not delete \Windows\BtCoreIf.dll
but it did rename and fixed all the issues.
Errors that show up are after installing TOM TOM 7.
On Restart.
BTTrayCE is not a valid Pocket PC application
When trying to open Bluetooth
BTManager is not a valid Pocket PC application
and for info on HTC HD2, GPS PORT is COM 4.
Click to expand...
Click to collapse

Drivers are conflicting need help

Hello all,
This question i have asked many a times still didnt got any solution again asking once more. Now i cooked wm 6.1 for opal it works fine but whenever i cook wm 6.5 and above (wm 6.5.1/6.5.3) my wifi would autostart (wifi status is off in kitchen) on welcome screen... after configuration and first boot when i try to turn off wifi it gets off but after a soft reset my today setting, wifi, bluetooth , comm manager and a lots of things wont work.
So i have got some alternative solution but all have some problem.
1. If i remove serial32.dll my rom works fine but i wont have bluetooth working.
2. If i remove serial32.dll reg entry then also same result no wifi bug but bluetooth wont work.
3. If i remove bluetooth packages from sys same result as above.
So finally i dont have any solution even i tried to remove serial32.dll and later i made cab and installed but after installation it again conflicts and as a result my today setting etc wont work. I also tried switching some driver with gene, elfin but same result.
The only possible solution i see is:
1. To use a different bluetooth stack but unfortunately there are no alternate bluetooth stack for opal (but i tried to install widcomm one with little mod it worked but again iam not sure coz its not finding bluetooth devices)
2. Any alternate dll for serial32.dll which will do the work of serial32.dll but should be compatible with opal (omap 850).
Anybody as some solution?

Anyone has some idea?

Touch HD n o USB

Hello all,
I have a HTC Touch HD...
My usb is not working.
Is there someone with the same problemm? or do you know how to solve this?
I can charge the phone,, that works....
Please help me.. i want to upgrade but dont know how.
Thx
Alex

I have the same problem too, so now I just sync with bluetooth.. I havent figured out what it is.. it use to work and all of sudden it doesnt.

knobbea said:
Hello all,
I have a HTC Touch HD...
My usb is not working.
Is there someone with the same problemm? or do you know how to solve this?
I can charge the phone,, that works....
Please help me.. i want to upgrade but dont know how.
Thx
Alex
Click to expand...
Click to collapse
What version of windows are you using on your PC? If you are using Windows Mobile Device Center (on Vista or Win7), make sure that in the settings, you still have a check mark on "allow usb connections".
And what if you connect the phone as an external drive? Does windows recognize it?

Chris Cross said:
What version of windows are you using on your PC? If you are using Windows Mobile Device Center (on Vista or Win7), make sure that in the settings, you still have a check mark on "allow usb connections".
And what if you connect the phone as an external drive? Does windows recognize it?
Click to expand...
Click to collapse
I have Windows 7, but i also had a HTC Touch pro2 before and that went good.
No succes when i manualy set the phone to harddrive...
I don't even get a popup screen on the phone to select a option...
Can someone please help me to tel me howto upgrade my phone with an other rom version.
I think i have to do a hspl too!!
Thanks all.

If you are not getting the option to choose how the phone should connect, have you checked the settings "usb to pc"? Maybe it is set to "not ask" when the phone is connected. I would check that before flashing a new rom.
I use Dutty's Holy Grail R2 ROM (it's an HD2 style rom for the HD) and I am happy with it. I also installed Cookie Monster's Home Tab which in my opinion is a "must have" as it improves the use of the home tab tremendously.
To install a new ROM, you don't have to use hspl if you don't want. I have always used uspl (newest version is uspl 2.5). You will need to install the old XP drivers on Win7 in order for it to work.
You can find information in the following links:
Using uspl
Tutorial on upgrading to 1.56 ROMs (very important; there you will also find video tutorials that will help you; info is for hspl or uspl)
HTC Drivers for XP - needed if you are flashing using Vista or Win7 (see post 1 and 3)
Dutty's Holy Grail R2 ROM (it's the one I use)
Other ROMs to choose from (HTCpedia.com) or see also ROM development section at XDA
Cookie Monster's Home Tab (great improvement to the home tab. You also need the CHT editor to fully customize things)
I hope that helps.

thx
Yes i changed that setting.. but the same result.
How do i install that uspl with only a memmory card option??
Thx

Hmm, I have never flashed via memory card. I think for that you do have to use hspl. But I am not sure, so maybe someone else can answer that.
Dutty's post in htcpedia.com says:
*Flashing Guide
SAFEST WAY TO FLASH YOUR ROM IS THROUGH STORAGE CARD METHOD:
* Copy BLACIMG.NBH into the root dir of your Storage Card.
* Be sure to have at least 30% of charge.
* Turn off your device by using the Power Button.
* Go to Boot loader mode. Push and hold Vol. Down + press Power button.
* After that your device will have a white screen with text " Press the power button to continue upgrade or Press Volume down button to cancel upgrade".
But, like I said, if you are only using a memory card, I think you have to have first installed hspl on your phone. ???

Touch Dual Calibration Data

Hey, I've tried for a long, long time to fix the screen-alignment-problem and I was successful.
Now I want to calibrate my screen.
Could anybody look into his registry for the
HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
under CalibrationData?
My value now is: 1520,1918 2322,2752 2224,945 503,928 529,2892
but thats not perfect for me.
Thanks

You can download the software here: ceregeditor.mdsoft.pl
With an active usb/bluetooth-connection via ActiveSync (sync-center) you cann connect the ceRegEditor to your phone an browse the registry for the value.
It would be so nice if someone could help me!

i would help you but i flashed wm 6.5 ,,

You flashed WM 6.5?
I also use WM6.5.3, so can you try it for me?
It would be nice

i have wm 6.5 not 6.5.3 but here it is:
in HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH
CalibrationData::
Value:
2027,2022 3435,3066 3406,928 606,919 631,3074
(space in the end)
hope it works