Related
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
maybe hard reset or rom update? , cant imagin what will do that unless somthing is hogging all cpu power perhaps
A reset will help but I'm not happy to update my ROM. I'm afraid for more problems.
witte_nl said:
Hi,
Sometimes my backlight does not switch on when I've pushed the on/off button for 1 sec to go out of the stand-by mode. I can see that the telephone is working but only without backlight. I don't know where I can find the settings. I'm using the Vario from T-Mobile.
Can somebady help me with this?
thank you in advance.
Regards Witte
Click to expand...
Click to collapse
Did you have the power cable in?
I have the same problem when i'm charging the phone.
When i press the power on button the light stays off.
Maybe you've got Spb GPRS Monitor installed on it?
Izzard-UK said:
Maybe you've got Spb GPRS Monitor installed on it?
Click to expand...
Click to collapse
Spb GPRS Monitor does this problem on my 9100 too, any software with SPB in the name seems quite buggy.. ;-)
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
witte_nl said:
OK,
right now I don't have the problem anymore but I'll will monitor it and maybe then I will uninstall the gprs monitor.
Thanks!! :lol:
Click to expand...
Click to collapse
You will.. do a search - I posted this a while back... they know about it.
Terran
MDA Backlight issue
I ran across a problem with the MDA, where I adjusted the Backlight settings. From there on the Backlight woulf not turn on unless I went to the setting control to adjust it. The fix: Go to backlight settings, set your brightness desired (maybe in the middle). Go to Battery power from the tabs that are currently listed. Make sure you have (Turn on Backlight when a button is pressed or the screen is tapped) Selected. Then press ok.
That should fix it if the issue you are experiencing is similar to mine.
I have the same problem with my artemis. And i think is from spb plus since the backlight control button from today dont even work on this new version. Or from phone profiles. Everytime i make a soft reset i have to reajust the backlight or when it turns off i have to make another soft for reajusting before it goes out. It's quite boring and i'm trying to find an app to replace spb with the close button and task button ant the today buttons shortcuts if is that the problem. And my artemis rom dont know why dont have the option on the backlight settings to turn on when screen tapped or key pressed.
My backlight is always set to min. level after wakeup, i have to start up the camera application to get backlight running everything. Have tried to change the settings from backlight but it reverts back after switching off the screen. anyone have the same problem
Derrick said:
My backlight is always set to min. level after wakeup, i have to start up the camera application to get backlight running everything. Have tried to change the settings from backlight but it reverts back after switching off the screen. anyone have the same problem
Click to expand...
Click to collapse
Happens to me after a soft reset, then sleep. The wakeup has the backlight switched off.
My work around is to go into backlight settings immediately after a soft reset, change to a different level, then change back to the required one. After that it will wake up with the correct setting. Bit of a faff I know but thats M$ for you!
Derrick said:
My backlight is always set to min. level after wakeup, i have to start up the camera application to get backlight running everything. Have tried to change the settings from backlight but it reverts back after switching off the screen. anyone have the same problem
Click to expand...
Click to collapse
Here is one solution:
http://www.iaccarino.de/silvio/ppcstuff.htm
Scroll down to the backlight timeout fix.
Or use a registry editor and set the value
LockLevel
beyond the key
HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel
back to zero.
Or if you use phoneAlarm you may also use the newest version of my NetManager
http://www.pocketmax.net/smf/index.php?topic=2650.0
the timeout bugfix is included in this release.
regards,
Silvio
siaccarino said:
Or use a registry editor and set the value
LockLevel
beyond the key
HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel
back to zero.
Click to expand...
Click to collapse
Thank you thank you thank you!!!!!!!!
This bug just started happening to me and I KNEW it was related to the phone lock (because it didn't start until I was playing around with the lock settings) but couldn't figure out how to fix it.
Whew... that was driving me absolutely nuts.
just had my sp5 last month, and this bug really pisses me off! good thing i found this solution!
GldRush98 said:
Thank you thank you thank you!!!!!!!!
This bug just started happening to me and I KNEW it was related to the phone lock (because it didn't start until I was playing around with the lock settings) but couldn't figure out how to fix it.
Whew... that was driving me absolutely nuts.
Click to expand...
Click to collapse
Me too. Thanks Guys
HTC Cruise backlight
Hey
i had the same problem (i guess) in addition to that the level of backlight used to decrease to the basic level after hanging up a call. However when i re-adjusted it, the level indicator is exactly where i left it! and once i touch it (not move it) it "remembers" the current level! but still darkens after hanging up calls or coming up from a sleep period.
the solution was :
after a soft reset, adjust the level you want then immediately lock your device and let it turn off the screen by itself. when it wakes up everything will be stable.
Whe I switch on my phone by pressing the top-right button, the phone is locked and the backlight is on. After 6 sec the backlight turns off.
When I unlock my phone, the backlight stays off
I would expect that the backlight gets on when you unlock... but it isn't.
Now I have to press the top-right button twice (to turn off and back on) and unlock within 6 seconds to get the backlight on.
This is very annoying.
Is there a way to get the backlight on after unlocking?
I have no solution - but can confirm that this happens to my phone too.
Hi,
Same problem here Found it very annoying so I just disabled the Backlight shut-off function alltogether
Regards,
Rolf (The Netherlands)
This seems to only happen if you use some kind of tweak that adjusts the auto-lock function. I used to use HD Tweak and changed the value for some auto-lock thingy (can't remember what it was).
After I hard-reseted it seems to have gone back to normal. So I would avoid any setting that changes the auto-lock thingy.
Note that uninstalling HD Tweak did not restore the correct functionality. Probably because I did not undo the changes prior to uninstalling.
So maybe you can try to change back the value first and see if it helps.
Good luck, I found that bug very annoying and decided I could live with no auto-lock.
Hi Saros,
Thanks for the input
Saros said:
Note that uninstalling HD Tweak did not restore the correct functionality. Probably because I did not undo the changes prior to uninstalling.
So maybe you can try to change back the value first and see if it helps.
Click to expand...
Click to collapse
I use HD Tweak aswell and had a feeling the Backlight Issue only occurred after enabling the Auto-Lock feature, thanks for confirming my suspicions. I DID however turn the feature back OFF in HD Tweak. Unfortunately that did NOT solve the problem
Don't feel much for a Hard-Reset at this point since it took me quite a while to get my new phone set-up correctly. Hopefully a fix will be available, I'll go browse through the HD Tweak topic to see if anything gives yet...
Regards,
Rolf (The Netherlands)
Rolf,
Disabeling the Backlight shut-off function is a good tip. Thanks.
But I still hope there will be a fix for this problem soon... so we don't use to much battery capacity.
Bart (Antwerp, Belgium)
I had this problem when i changed some registry keys. The following must be:
HKEY_CurrentUser\ControlPanel\Backlight\[AutoDeviceLockEnable set to 0]
HKEY_CurrentUser\ControlPanel\Backlight\LockLevel\[LockLevel set to 0]
marpam,
When I set the first regkey back to 0, the autolock doesn't work anymore.
When I manually lock the device by press and hold the down-right button (stop call), the problem still exist when you unlock.
I want to keep the autolock function, but with backlight back on when I unlock the device.
Bart
I had this same problem. I did a hard reset and again set auto lock in tweak then shut off backlight off and the problem is gone and now auto lock is fine.
You can also use Lumos - solved the issue for me
http://forum.xda-developers.com/showthread.php?t=450318
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof
Hi, my typical procedure before putting the phone in the pocket is to hold right soft button to lock the screen and to switch off the screen with the power button. I wonder if there is a way to do it at once. You press the power button and screen goes off locked?
Thanks.s.
Install AutolockScreen 1.7 (I'm at work so don't have the cab with me, but if you search this site you'll find it. Install the cab and then go to Start\Settings\System\SmartLock and tick Suspend lock.
LockDevice works well...
http://www.1800pocketpc.com/2009/09...k-the-windows-mobile-screen-after-wakeup.html
Do either of these lock screen apps consume a lot of power?
I understand they have also been created with power saving feaures but what do they run like in a coarse of a day for instance, do they drain the battery quickly?
Thanks.
HD Tweak also has option for autolock when device turned off
Fallen Spartan said:
HD Tweak also has option for autolock when device turned off
Click to expand...
Click to collapse
It does but it has a problem with the background light not undimming after locking.
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
rpimps said:
Doesn't the phone automatically lock itself when you turn off the screen? Mine seems like it always does.
Click to expand...
Click to collapse
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
ClydeB1 said:
It does but it has a problem with the background light not undimming after locking.
Click to expand...
Click to collapse
My phone is set to quite dim anyway in Power settings so this doesn't affect me.......hence why I forgot about it
I've attached the cab which ClydeB1 was talking about, i.e. SmartLock 1.7
Mastoid said:
Mine doesn't do that unfortunately. I am using the app suggested above by ClydeB1 and its working great, not much battery drain either.
Regards.
Click to expand...
Click to collapse
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
rpimps said:
What happens if you just turn the screen off with the power button? Does touching send/back/etc turn it back on?
Click to expand...
Click to collapse
Fallen Spartan said:
On my device, no. If you turn screen off, only way to turn it on again is with the power button (unless someone rings etc)
Click to expand...
Click to collapse
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
True, yes, but I use Smartlock 1.7 so phone does lock
Fallen Spartan said:
True, yes, but I use Smartlock 1.7 so phone does lock
Click to expand...
Click to collapse
Was using your answer and expanding on it for explaining to rpimps
ClydeB1 said:
Yes, if you just press the power button the screen goes off but it is not locked and although touching the buttons does not turn it back on, if an sms comes in and wakes the device the buttons are then active and could be accidentally touched whilst in your pocket. With the screen locked this does not happen and you need to first unlock the screen to access the sms or the device in general.
Click to expand...
Click to collapse
Oh ok thanks for the info. Mine does unlock when I get a call/sms but I text a lot so I prefer it to do that, otherwise I'd be wasting a lot of time unlocking it every time I got a message.
Thanks for the hint ClydeB1 and thanks for the cab Fallen Spartan.
I tried SL 1.7 and there are three things, which I do not really like.
1. The phone returns to the very same screen where it was switched off. Some may consider it a pre. I prefer to see the clock when I switch it on.
2. The screen blink once when the phone is switchd on. I find it a bit irritating.
3. I do not see how I can uninstall it.
So, I wonder if you can undim the screen in HD Tweak by touching it or you need to do something extra?
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
ClydeB1 said:
You uninstall it as with any other cab. It's called Chobit Company Smartlock on the list of apps.
If you do use the hd tweak edit, you'll need to push the power button twice I think (it's been a long time since I used it I've forgotten), the first time to activate the screen (you'll see the screen but the backlight will not light up properly) then again to undim and then you can unlock the screen. I think that's the sequence, you'll need to play a little.
Click to expand...
Click to collapse
The way I had activated the lock was by pressing and keeping pressure on the end call softkey, after a few seconds it vibrates and activates the lock. It comes on automatically when you put the screen off or restart the phone.
Regards.
Auto-lock screen
I'm running CLEAN ROM (B version) with SPB Mobile Shell.
Considering I don't want any superficial apps installed on my HD, I used HD Tweak and turned autolock on.
To get over the "background light not undimming after locking" problem, I initially unchecked "Automatically adjust backlight" under Settings > System > Power > Backlight and set at 100%. I also set the "Dim backlight on Device" when on battery power to the same time as "Turn off device if not used for". In my case that was 1 minute. I tested and this worked fine.
I then went back in and checked the "Automatically adjust backlight" checkbox.
I also performed the wake up with volume button reg edit making it easier to wake up device.
[HKEY_CURRENT_USER\ControlPanel\Keybd]
"DefaultKeyLock"= 0
UPDATE:
Just tested again and I realised if you wake up device but don't unlock. The screen will automatically dim. Unfortunately if you unlock immediately after, the dim screen issue rears it's ugly head again. The only workaround at this point is to completely disable dim backlight.