hello all ..
long time reader, first time poster .. i've recently purchased a Hermes and this is my first Windows Mobile based device .. i'm switching from an Motorola V80 and am missing the one of the features big time ..
whenever i had a appointment come up on my V80, it would continually ring (or vibrate) until it was viewed ..
i work & go to school full time and this is a great way to remind me of classes when my phone is sitting @ my desk .. just wondering if anyone knows of a program that would extend the alarm on the Hermes ..
any help would be much appreciated ..
cheers.
SPB Pocket Plus has an option to do repeating alarms
1) Ascending alarm (repeat)
2) Continous Repeat (for a minute)
3) alarm and vibrate ...etc..
http://www.spbsoftwarehouse.com/products/pocketplus/faq.html?en
myknyte said:
SPB Pocket Plus has an option to do repeating alarms
1) Ascending alarm (repeat)
2) Continous Repeat (for a minute)
3) alarm and vibrate ...etc..
http://www.spbsoftwarehouse.com/products/pocketplus/faq.html?en
Click to expand...
Click to collapse
i'll give it a go .. cheers.
Hi all
I'm trying out Klaxon alarm clock.
Can anyone tell me the purpose / function of the "bell" button (bottom 2nd from right in attached image).
When I'm setting up an alarm, clicking on it just toggles making it lit up/not. If I press the play button it always plays an alarm tone (beep) whether the bell button is pressed or not. Very confusing and as usual with all these little apps there is no manuals or instructions anywhere.
Thanks for any help
Bell icon in klaxon
When bell icon is 'lit' it means the alarm is active. When bell icon is 'unlit' it means alarm is inactive.
Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Also, when I click on the "play" button it plays an alarm beeping regardless of whether the alarm is active or inactive. Surely if I make the alarm inactive, then the play button should play nothing and perhaps tell me "nothing to play, alarm inactive"...??
also as well as the questions above, can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
gt112 said:
Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Click to expand...
Click to collapse
No, it is'nt. This is an important feature to me at least. Just because I have set up the alarm does not mean that there is'nt situation when I do not need it. Let me give you an example. I may have an alarm to remind me to pick up my children after school. During school holidays, I would make it inactive, and I would reactivate it when the school starts. I could delete it during school holiday and recreate it I suppose but that's too troublesome.
You might find good use of this in the future.
Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man
and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
Bacardi Man said:
Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man
Click to expand...
Click to collapse
I kinda have the same problem..the klaxon alarm works, the music starts but ends after a few seconds only vibration goes on and on.. =S
does anyone have the same problem?
Try to disable the light sensor.
hehe yeah I already found out myself, stupid me
but thx for the fast reply!
What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.
Surfer_D said:
What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.
Click to expand...
Click to collapse
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
I have tried this but I cannot seem to find Klaxon.exe whether it is installed on my device or on my Storage card, I am not sure what to do.
Nevermind, got it working after LOTS of messing around
at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks
I ended up uninstalling it as it was too unreliable. It was a bit slow to start up and also the alarm always went off late when integrated with TouchFlo (not sure if S2U2 was causing this). Back on the standard alarm now and it actually goes off at the right time now, which is a bonus.
gt112 said:
and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
Click to expand...
Click to collapse
I guess that the Expire is the how long the alarm wanto keep snoozing.
Let say yr snooze time is 5 mins. And yr expire time is 30 mins. Means it will only snooze for 6 times.. then it expired..
sbirsen said:
at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks
Click to expand...
Click to collapse
U can chooose the ringtone (MP3) from the 'sound logo' which is left to the 'Play' logo. From there u go search for yr MP3 file from yr folders. But remember to lit up the 'bell' logo or else it wont sound. Also pls close the light sensor which i found it is troublesome which yr alarm wont sound after 1st snooze.
robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
does this work with htc hd 2 and htc sense?
because it says only touchflo 3d and not htc sense?
thanks for the answer
cheers
I would like to switch off the alarm just by rotating the phone, for eg. from face up to face down.
Is it possible to do it with stock alarm app or do I need to install other alarm application ? Which one ?
Thanks in advance
Andrej
klaxon has this feature. you can also shake the phone to snooze/turn off the alarm.
http://forum.xda-developers.com/showthread.php?t=412669
G-Alarm does the same but there are still more functions
GAlarm is also nice: http://forum.xda-developers.com/showthread.php?t=465879
edit: oops, I did not refresh fast enough I guess
Thanks I installed Klaxon.
It works ok, but I can load only mp3 ringings... Where are windows built in ringtones located ?
in \Windows
Hi all,
When I look at "home" I see that Alarm is disabled. When I click the alarm button it opens the settings for my alarms, and they are enabled!! But when I go back to the home page its still disabled I've tried adding a new alarm and setting it to "on" but they still keep being disabled, thus making my alarm function not working. It has been like this the entire week, and thats why I haven't heard my alarms, making me late for work
I've got vovicheck, dragon_soft dot clock, brians V6 test 1(extra icons on home), HD wallpaper, disabled current location (though not working), touch x remove top curtain, dragon soft manilla calender text removal, and some other stuff, but I haven't installed any alarm cabs (to my knowledge) I've only added some ringtones in my alarm folder, and those are working - I don't understand this
EDIT: see my last reply.
Any help would be very much appreciated.
I've tried deleting calender text removal, and calender transparant, but that doesn't help. Really annoying
Seems to work now after I deleted something called "AA AA" can't remember what cab that was, but it's definetely not the original cab name. Not totally sure though? Anyone know what AA AA, is??
Seems to be the cab called "Clock- Transparency.cab" that messes the alarm function up. Sorry for spamming the forum
After reading a lot I still didn’t find a solution for my problem:
The alarm plays 2 melodies, one of the clock and one of the remembering when the alarm goes off.
Can somebody help my plz, Thx Mad
HD2 Rom: 1.48.404.2 NL, Manila: 2.5.19211619.0, Radio: 2.06.51.07
Had the same problem, i't disappered for me when i disabled the "my location" function.
//Johan
Update:
I'm tired of searching a solution of my problem.
I just install G-Alarm. This is working good for the moment. Together with the patch “12aon Alarm Hack Home Tab.cab” you can access G-Alarm directly on your main page.
Still if someone has a normal solution I still like to know it. So all info related to this topic is welcome.
Now I found this:
and this reg can fix clock problem(only alert notification ring)
[HKEY_CURRENT_USER\ControlPanel\Notifications]
"AlertInterrupt"=dword:00000000
Link: forum.xda-developers.com/showthread.php?t=610927
Maybe ill will test is later
Any update on this dual alarm ringing?
Mine also plays the Alarm ring (Alarm-Classic) and the Reminders ring (Ring-Buoy)
The Alarm ring is designed to get me up (am) & remind me to take medication (2 x pm) and the reminders a gentle ring in the room for Outlook calander items.
Having both when the Alarm goes off is too much!
I have installed a custom rom and now having no problems.
too late for your solution, yet you need to go into system sound settings, and disable "notification sounds". That can be enough reason for the alarm jingle not to sound at all sometimes, afaik