Database Users

Clock & Alarma - can not breake alarm

Someone cann help me:
1. When I make software reset on my MDAPro (Universal) my Universay all time play alarm - about 20 min and then stoped and
2. After then, when I switch on alarm, then (when alarm played) I canot see message to switch off alarm??? And I canot switch off alarm.
Alarm stoped about last 20 minits.

Alarms
Try memmaid (search forums for memmaid and alarm for precise solution)
You need to run memmaid and look at the notifications, and delete the "alarm" ones as they have got "stuck"

Yes, I had this problem also. You can perform a hard reset, that will solve it but then you loose all your data and it is a pain! So I spent all day trying to find out how to fix it without doing a hard reset, and here are the results:
1. Open the Clock & Alarms app, and click on the Alarms tab. Make sure everything is unticked and unselected.
2. Install and launch MemMaid (http://www.dinarsoft.com/ - Note: MemMaid is shareware that expires after something like 30 days, or you might use another app which allows you to edit the notifications queue), and then press the Jump To softkey and click on the the Notification Queue option.
3. Press the Find Duplicate button, and make sure you say yes to deleting all duplicates.
4. Now you have to scroll through the list slowly, you must find all the ones which have this text in them and check the tickbox: \Windows\clock.exe.
5. Now you have located the rogue alarm notifications and ticked them, press the Delete button and confirm in the next step. Make sure you have NOT ticked/selected any other notifications except the clock.exe ones before you do this step, otherwise it can easily make your phone stop working!
6. Soft reset your device. When it has finished booting, you should notice that it doesn't vibrate madly with alarms for 20 minutes like it used to do before, and you should have a flashing green LED on the right instead of orange
7. Stop using the built-in clock & alarms app if you don't want this to happen again - it is too buggy! Find a replacement alarm app, there are loads of free ones out there!

Thanx all! Specialy to sl9
THANK YOU!!! NOW IS ALL GOOD !
What you mean:
"Find a replacement alarm app, there are loads of free ones out there" (I canot see "there" link for free app).
For all:
Which alarm app you use (whithout bugs) ?
1. SPB Clock
2. Chronos for PPC v. 2.95
3. Phonealarm v 1.52
4. Pocket Clock v. 1.15
or some another app ?

I actually haven't got round to finding a replacement yet, but one thing is for sure: do not use the HTC alarm built-in app any more
I am glad this solution worked for you without hard reset, I could not find anywhere else exactly how to solve this problem so it took me literally a whole day of experimenting - but with good results

Klaxon confusion?? can u help

Hi all
I'm trying out Klaxon alarm clock.
Can anyone tell me the purpose / function of the "bell" button (bottom 2nd from right in attached image).
When I'm setting up an alarm, clicking on it just toggles making it lit up/not. If I press the play button it always plays an alarm tone (beep) whether the bell button is pressed or not. Very confusing and as usual with all these little apps there is no manuals or instructions anywhere.
Thanks for any help

Bell icon in klaxon
When bell icon is 'lit' it means the alarm is active. When bell icon is 'unlit' it means alarm is inactive.

Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Also, when I click on the "play" button it plays an alarm beeping regardless of whether the alarm is active or inactive. Surely if I make the alarm inactive, then the play button should play nothing and perhaps tell me "nothing to play, alarm inactive"...??

also as well as the questions above, can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help

gt112 said:
Thanks for the reply qai5er
Stil confused. If I go in an edit /create a new alarm, why would I want to make th ealarm inactive???? Isn't that a bit of an oxymoron ?
Click to expand...
Click to collapse
No, it is'nt. This is an important feature to me at least. Just because I have set up the alarm does not mean that there is'nt situation when I do not need it. Let me give you an example. I may have an alarm to remind me to pick up my children after school. During school holidays, I would make it inactive, and I would reactivate it when the school starts. I could delete it during school holiday and recreate it I suppose but that's too troublesome.
You might find good use of this in the future.

Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man

and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help

Bacardi Man said:
Since Klaxon seems to work witout any problems on your devices I was wondering if you could tell me which settings you chose.
I have installed Klaxon and checked all boxes in the settings-menu, but the alarm won't work.
Instead of the Klaxon alarm the standard WM-alarm start at the specified time, but ends after a few seconds by itself (probably because Klaxon wants to start its alarm?).
Could you give me any advice?
TIA
Bacardi Man
Click to expand...
Click to collapse
I kinda have the same problem..the klaxon alarm works, the music starts but ends after a few seconds only vibration goes on and on.. =S
does anyone have the same problem?

Try to disable the light sensor.

hehe yeah I already found out myself, stupid me
but thx for the fast reply!

What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.

Surfer_D said:
What does the options "Integrate with TouchFlo3D" and "Forcibly remove windows Alarm" do?
I see no difference in touch flo nor in the normal windows alarms. Even if I touch clock in touch flo windows alarm is opened.
Click to expand...
Click to collapse
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"

robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
I have tried this but I cannot seem to find Klaxon.exe whether it is installed on my device or on my Storage card, I am not sure what to do.
Nevermind, got it working after LOTS of messing around

at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks

I ended up uninstalling it as it was too unreliable. It was a bit slow to start up and also the alarm always went off late when integrated with TouchFlo (not sure if S2U2 was causing this). Back on the standard alarm now and it actually goes off at the right time now, which is a bonus.

gt112 said:
and I repeat my previous questions incase they get lost in the conv
can anyone tell me what the items mean on the alarm config page . . .
Snooze (min) I assume this is the snooze time
Expire (Min) - what is this?
Delay (Sec) - what is this?
Many thanks to anyone who can help
Click to expand...
Click to collapse
I guess that the Expire is the how long the alarm wanto keep snoozing.
Let say yr snooze time is 5 mins. And yr expire time is 30 mins. Means it will only snooze for 6 times.. then it expired..

sbirsen said:
at least 2 people have now said that they managed to sort it out, but didn't explain how they did it.
to the people who are now able to use klaxon as a normal alarm, can you please share what settigns you had to change to get the alarm to play (say, a mp3), and then snooze for x minutes ?
thanks
Click to expand...
Click to collapse
U can chooose the ringtone (MP3) from the 'sound logo' which is left to the 'Play' logo. From there u go search for yr MP3 file from yr folders. But remember to lit up the 'bell' logo or else it wont sound. Also pls close the light sensor which i found it is troublesome which yr alarm wont sound after 1st snooze.

robned said:
None - it doesn't seem to work.
However, I've installed SSMapa (2 files copied into /windows and then when opening up settings I get 2 questions - accept these). Second - start SSMapa, do an init, find time / clock and set up program exactly as typed:
/Program/Klaxon/Klaxon.exe
Set directory:
/Program/Klaxon
Chose save. Then deploy. You get 2-3 worrysome questions about removing signed exe files - answer yes. Restart device for simplicity sake or wait a moment and you'll get 2-3 questions about MP???.exe answer yes. Now you have Klaxon integrated completely into your interface. Meaning that when alarm sounds, Klaxon pops up. When you click the time - Klaxon is opened. No more useless WM time settings.
"The best with windows mobile is when you don't know you have it"
Click to expand...
Click to collapse
does this work with htc hd 2 and htc sense?
because it says only touchflo 3d and not htc sense?
thanks for the answer
cheers

Alarm plays 2 melodies when it goes off

After reading a lot I still didn’t find a solution for my problem:
The alarm plays 2 melodies, one of the clock and one of the remembering when the alarm goes off.
Can somebody help my plz, Thx Mad
HD2 Rom: 1.48.404.2 NL, Manila: 2.5.19211619.0, Radio: 2.06.51.07

Had the same problem, i't disappered for me when i disabled the "my location" function.
//Johan

Update:
I'm tired of searching a solution of my problem.
I just install G-Alarm. This is working good for the moment. Together with the patch “12aon Alarm Hack Home Tab.cab” you can access G-Alarm directly on your main page.
Still if someone has a normal solution I still like to know it. So all info related to this topic is welcome.
Now I found this:
and this reg can fix clock problem(only alert notification ring)
[HKEY_CURRENT_USER\ControlPanel\Notifications]
"AlertInterrupt"=dword:00000000
Link: forum.xda-developers.com/showthread.php?t=610927
Maybe ill will test is later

Any update on this dual alarm ringing?
Mine also plays the Alarm ring (Alarm-Classic) and the Reminders ring (Ring-Buoy)
The Alarm ring is designed to get me up (am) & remind me to take medication (2 x pm) and the reminders a gentle ring in the room for Outlook calander items.
Having both when the Alarm goes off is too much!

I have installed a custom rom and now having no problems.

too late for your solution, yet you need to go into system sound settings, and disable "notification sounds". That can be enough reason for the alarm jingle not to sound at all sometimes, afaik

Alarm Clock, simple with MP3?

Hi All,
Had my Desire for a couple of days now and I am well pleased. Except,
I would like to find a simple Alarm Clock app that supports
MP3 as sound
Vibrate
Snooze
And a way to turn it off
Basically, you all remember the old radio Alarm clocks everyone had, You set your time, you set your radiostation and you fell asleep.
It had a MASSIVE snooze button on top and an off button on the side.
That's what I want.
I've tried looking through market but 8 of 10 have a review saying "Does not ring at all" and well. If I see that in a review it's out straight away.
Thank yuo kindly for any help given.

the built in alarm allows snooze and vibrate as well as turning it off - not worked out how to get it to link into mp3 yet like you could on the G1

walkerx said:
the built in alarm allows snooze and vibrate as well as turning it off - not worked out how to get it to link into mp3 yet like you could on the G1
Click to expand...
Click to collapse
GOT IT!
If I set any of my MP3s as a ringtone it then comes up in the list of choosable music in the standard alarm as well....
But you need to have actually SET IT as you ringtone once first...

How about make a folder on the SD root called "alarms" and put mp3's in that? This is my first Android phone and even i figured that one out lol.

Just make folders like these.
Ringtones:
/sdcard/media/audio/ringtones
SMS Alerts:
/sdcard/media/audio/notifications
Alarm Alerts:
/sdcard/media/audio/alarms

Or they can be on the SD cards root like mine.

How did you manage to work out that??

Are there any apps similar to G-Alarm on Windows Phone?
Ie with multiple alarms, random mp3, weather, calculation/maze tasks, tilt/shake sensor, speech, etc.
More info here: http://www.ageye.de/index.php?s=galarm/about

I've found the alarm exact u are finding, just search Alarming at Market. I'm quite satisfied with it. Shake to snooze feature I most like

Kula5haker said:
Just make folders like these.
Ringtones:
/sdcard/media/audio/ringtones
SMS Alerts:
/sdcard/media/audio/notifications
Alarm Alerts:
/sdcard/media/audio/alarms
Click to expand...
Click to collapse
you don;t need the \media\audio\ at the start.
just shove the ringtones, notifications and alarms folders in the root of the card.

hi everybody. I ve found a lot of alarm apps on the market, but none could wake up my phone and thus me then .
Q: is there any timer-application that is able to turn the phone on -for alarm purposes while it is off, when i sleep ?
if there would be any app of this self-turn on in a specified time of a day, that would solve my buzzer problems.
sorry for that noobish question I am new using smartphone.

I'm looking for an alarm program that chooses randomly in an mp3 folder for the alarm.
I couldn't find anything like this for the moment.

Add more alarms to the alarm screen in windows ???

Can we add more alarms to the alarm screen in windows ?
Someone thats way better at hacking WM >??
[HKEY_LOCAL_MACHINE\Software\Microsoft\Clock\
has 0 1 2 = 3 alarms ...
I tried to add a 3 key however it didnt add it to the alarm screen
Any Ideas Guys ?

Your best bet is to use a 3rd party alarm clock application

stepw said:
Your best bet is to use a 3rd party alarm clock application
Click to expand...
Click to collapse
well thats no fun LOL and I kinda Like this ver

The Windows Mobile built in alarm is unreliable, if you set appointments and alarms, alot of the time just the appointment will go off,or neither will go off.
I would suggest gAlarm, it's the best I have found.
Really though, if you need your phone's alarm as anything more than a novelty, a 3rd party app is the way to go.