I turn on my touch , but it doesn't boot ... it stays on hardreset mode . But i can't do HR ,because buttons doesn't press... I can to power off touch only if i take out battery... I can't activate bootloader, if i do this HR screen shows ) What is it? And what can i do? Please help me!!
Related
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
is it helpful to remove the battery as a "cold reset" ?
which battery. The backup one? because the main battery i have removed and nothing happens
guys i have a similar problem. my power button has broken and i turn on the device with the record button (i have remapped the buttons). Yesterday i turnd it on and the screen freezed on the today screen . I performed a soft reset, the screen went blank and it never turned on. Now the device is dead, soft reset won't work, it doesn't seem to charge (no light when i put it on the cradle) and i cannot perform a hard reset because i do not have a working power on/off button.
Is there anything i can do to turn it on?
...
Try to remove main battery for a longer time(up to 1 hour or more). The backup battery will discharged what causes hard-reset afterwards.
demstav said:
Hi guys. My qtek 2020 has gone dead. i pressed the reast button and then it suddenly did not start. The screen is completely blank. The problem is that the power on/off button is broken and i cannot Hard Reset the device to try and start it up this way. When i press only the reset button nothing happens. Is there anything else i can do?please help
Click to expand...
Click to collapse
ok so i have seen reset buttons that stick and will not go
did you try pressing the reset button aggain? do you fell the click he made?
try it
Hi,i have a problem..
Everytime i press the central button (between the 'green call button' and the 'red call button') i have to re-align the screen
I tried to flash and reinstall the PPC but nothing changed,evrytime i power off or i put in stand-by my device it asks me the same thing: align screen
Xtrange problem.....
Maybe downgrading again to an original can fix this
but tell us more about your phone we need more info please.
Status=Bricked
hello all ,
i need your help with this problem , my HTC touch cruise touch screen stopped working and i have the Mobile sync with exchange and i'm unable to do anything before i put the password , even HARD reset is not working
even whn i try to connet to PC by USB cable it ask to unlock by enteriing password
r 1.58.21.23
G: 25.65.30.04w
d 1.28.00.00
with windows mobile
can you please help me ?
While gps button pressed (under green button), press center D-pad button this will bring you to alignment screen it saved me from HR many times.
if this will not work try HR - while gps & explorer buttons pressed, press the reset button.
if this won't help try another rom using SDcard method.
if all will not help its probably hardware.....
Hi, I´ve nike100 and this phone is dead. After I press power button the screen blinks, so I mean that today appears for second and then the phone turns of. From this moment I can´t turn it on and it doesn´t response for charger. Is there any way to repair my nike, or it´s realy bricked?
Thanks
Hi! im facing a rly boring problem.
Touch screen just dont work, only on first boot works great, but if I lock and unlock my screen the touch just stop.
Touch buttons (capacitive buttons) work great. Also, I figured out something, If I press the power key and fastly move my finger around the screen 'till it turns on, it does detect my finger and works until i remove my finger from the screen, then it just stop.
I really neeed help