Does anyone know how i can remove the touch it blackstone dialer as it is a bit laggy for me? When i try windows tells me it cannot be completely removed.
AFAIK only hardreset will help. Did it twice, now I know how to re-setup my device in few moments. Also I keep all CABs I use on card.
One of the reasons I don't use TF3D anymore is it has tons (1600) files in windows folder which slows down a lot of things. I just don't this kind of mess on my device (WM alone are enough mess).
Dr.Sid said:
AFAIK only hardreset will help. Did it twice, now I know how to re-setup my device in few moments. Also I keep all CABs I use on card.
One of the reasons I don't use TF3D anymore is it has tons (1600) files in windows folder which slows down a lot of things. I just don't this kind of mess on my device (WM alone are enough mess).
Click to expand...
Click to collapse
You are talking about different things here, the dialer does not mean TF3D.
I deinstalled the Blackstone Dialer via Activesync, but I never tried it from inside the phone so I can't tell if there were problems with deinstalling.
Just reinstall the original Xperia Dialpad (dialer)
The cab is here
cab provided deletes HTC's "incoming call" menu previously installed!
The cab installs the Xperia dialpad, that's true, but by completely removing the HTC GUI for incoming calls as well!
To accomplish this, I could also uninstall the HTC gui, I would not need your cab for that!
Is there any way to have both
1. the Xperia dialer
2. a graphical GUI for the incoming call (incl. photo etc.)
This seems surprisingly difficult!
There is an easy way...
... to have
1. a graphical incoming call window including caller photo id
2. the original dial/pin/... keypad of the Xperia
Just install S2U2 (slide2unlock) freeware, you can disable the locking feature and just use its caller id feature!
It works just well, and you can forget about all this additional HTCphone stuff (which of course you should uninstall this way...)!
dadeadman said:
Does anyone know how i can remove the touch it blackstone dialer as it is a bit laggy for me? When i try windows tells me it cannot be completely removed.
Click to expand...
Click to collapse
arpysystems said:
... to have
1. a graphical incoming call window including caller photo id
2. the original dial/pin/... keypad of the Xperia
Just install S2U2 (slide2unlock) freeware, you can disable the locking feature and just use its caller id feature!
It works just well, and you can forget about all this additional HTCphone stuff (which of course you should uninstall this way...)!
Click to expand...
Click to collapse
Not true. S2U2 is even more laggy than the HTC slide to answer thing.
I suggest sticking to the Blackstone dialer, it's the fastest I ever used.
The dial/pin/keypad is only a skin, performance will not improve if you have the Xperia dialer with slide to answer.
Related
hi all,
i have done the clean install, without the O2 cabs
but i need to install smart dialer as i use my exec turned with the screen facing outwards..
any suggestions on how to get smart dial workin??
thanx,
frz
Sorry for slightly drifting from your real question but do give Imaginet-Fingerclix a try. Though slightly sluggish it provides nice large keys both in Landscape and portrait for convenient finger tapping as well as the ability to send SMS from the same screen.
Regards
thanx smrz,
but i have a large contact database and need to find the numbers of different contacts as it would be really difficult to remember all
thus i need smartdial
i have another program called
quick contacts
Click to expand...
Click to collapse
but it needs smart dialing installed to work..
thanx,
frz
Just install this CAB in Extended_ROM
Enable_VT_RTPlugin_0727_2_signed.CAB
I had managed with this problem within 1 week!
thanx, pocket
will the intellidialer also work?
regards,
frz
Do you mean Smart dialing? Smart dialing is intergrated in this CAB
Okay, I would like to acknowledge that this is primarily my fault because I was both lazy and stupid.
1. I downloaded the Etenskin+ smartdialer that is floating around here, as well as the landscape skin and installed them. They show up in my remove programs as Geo77... I definitely prefer it to the stock dialer but did not love the color so I...
2. downloaded the Vista Black skin from this website http://www.paulya.com/etenskins.htm
From my understanding this skin worked with smartdialer. I followed the instructions, unzipped the files and copied them into my windows directory. As I clicked okay to replae the existing files, I thought, "How will I get these off if I dont like them?" but it was too late
Well the skin doesn't quite work, there is sort of a blue shadow, almost like a double image and I like it but don;t love it, so now I want to remove it. Of course, I do not have a copy of the original files.
Any suggestions?!
just go to settings, remove programs, and uninstall the dialer. assuming you install using active sync or cab file
weezy said:
just go to settings, remove programs, and uninstall the dialer. assuming you install using active sync or cab file
Click to expand...
Click to collapse
Thanks Weezy! I was kind of afraid to do that since I didn't know what would be left. Worked like a charm, uninstalled and then re-installed and I am back to step one.
The search for the perfect dialer skin continues!
I also tried that smartdialer with eten dialer and hated it. i hate the smartdial crap. so i just uploaded the vista eten dialer and it worked perfectly, except for when its in landscape mode. it screwed it up so i had to install it again. but no biggie. i see no purpose of using the phone in landscape mode.
deviusdragger said:
I also tried that smartdialer with eten dialer and hated it. i hate the smartdial crap. so i just uploaded the vista eten dialer and it worked perfectly, except for when its in landscape mode. it screwed it up so i had to install it again. but no biggie. i see no purpose of using the phone in landscape mode.
Click to expand...
Click to collapse
I agree with you on the landscape mode. I threw it on since I have the room in memory.
I don't hate the smartdialer though, and I definitely prefer the etenskin to the standard dialer when I do need to use the keypad. I usually use voice command to dial a number that is not in my contacts, but for things like entering an account # or making a choice on a IVR, it is nice to have larger buttons.
I think there is a way you can get the etenskin and disable the smart dialer. Check out the website in my previous post in this thread.
deviusdragger said:
I also tried that smartdialer with eten dialer and hated it. i hate the smartdial crap. so i just uploaded the vista eten dialer and it worked perfectly, except for when its in landscape mode. it screwed it up so i had to install it again. but no biggie. i see no purpose of using the phone in landscape mode.
Click to expand...
Click to collapse
I agree with you on the landscape mode. I threw it on since I have the room in memory.
I don't hate the smartdialer though, and I definitely prefer the etenskin to the standard dialer when I do need to use the keypad. I usually use voice command to dial a number that is not in my contacts, but for things like entering an account # or making a choice on a IVR, it is nice to have larger buttons.
I think there is a way you can get the etenskin and disable the smart dialer. Check out the website in my previous post in this thread.
Wait, I thought Black Glass was the only one you could get from E-Ten that supports SmartDial. So you're saying that others on the page (Black Vista) support it?
i have a tmobile Wing running wm6 and i have tried all htc touch apps on this website and they dont work for me... can someone either upload working apps(like the contact manager, the comm. manager, the cube thing) or upload a working ROM of the HTC touch(which will work on the WING) for the 64 bit computer??
how are you installing them?
you realise you put the cab file onto the phone then execute it there rather than your pc right?
thats the impression i get from your post...
yes i know that, i am not a nub... i have installed many apps, but they end up screwing up my phone cause it works so slowly
bump ...
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
well, i transfer it to my storage card, and then run it. later i get a successfully installed message. i soft-reset my phone and then either the program doesn't start up, puts my phhone in a infinate reset mode, or doesnt work correctly.
the htc cube is installed, but i can see the cube! i see this S icon, and a P icon when i slide my finger from bottom to up . since it didnt work, i unistalled it.
the contact manager from the all htc apps extracted sticky starts up, but i cannot change the theme! i see the regular old contacts manager with a white bar, when i run my finger over it, it shows a letter, and scrolls to it, but doesnt have the touch interface i need, and its not graphical at all
and the comm. manager REMOVES my comm. manager, rather than adding one
i am running wm6, boots fine now, the following htc apps
-audio manager
-htc touch theme
-htc album
-htc touch skin for wmp
-spb backup
-htc touch wait cursor(got from freewarepocketpc.net)
that should explain a lot
mr_ding said:
All the HTC touch apps that I found from explode, they all work fine on my SX66.
Can you describe more about your phone, and how you install the application?
What symptom/behaviour are you seeing on your phone?
Click to expand...
Click to collapse
explode? can you please post some links and i will try them and replay asap
The 'htc cube' your talkin about is not the actual cube. its called FTouchFlo and is used to scroll and launch programs by using gestures. the changing between s and p is changing between launching mode and scrolling mode. What your looking for is the TouchFlo cube, which i belive must be cooked into a rom to work well. there are other options out there that can be cab installed, just search around the forums.
u mean something like this?
http://forum.xda-developers.com/showthread.php?t=343583
i tried that but in the instructions, i dont know what the prequisites are n i dont have em
i copied the shortcuts to the startup folder and then i ran the program in the folder containting the exe file that came with the zip
can someone post a cab, that i run, and will configure my phone that it works... i dont want to do the "remove the following apps from the startup folder...", the cab file should do that...
i also have problem with touchflo. i saw a lot of threads on it and i dun know which 1 i have to follow and install.
and if any expert here can help me.
1. i am on wm6. not htc theme.
2. i am on wisbar and wisbar desktop
3. device is atom life.
and i want to use the touchflo. can anyone assist me?
can i do the swiping even my screen is on the wisbar?
can anyone help me with this.
help is greatly appreciated.
thanks!
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
killeredge said:
htc theme is not an operating system. it just alters the way it looks. im runnign wm6 also
wisbar is okay and i dont think it affects touchflo, except wisbar uses up too much memory
so who ever has touchflo working on wm6, can u please post a link to the file, and specific instructions on how to install?
Click to expand...
Click to collapse
yes. i want also.
bump? ...
bump ??
come on ppl, i am sure that someone has gotten touchflo to work
Hello! I'm using Inesoft Dialer & Stuff on my phone. However, it would appear that it's just a kinf of overlay for the original software on the X1. When I miss calls it ****s up and I get multiple screens, the old call list flashes up for a short moment. How can I fully uninstall that old Dialer? Will it interfere with CommManager?
I couldn't uninstall HTC Dialer .. but it's some time ago. It simply didn't remove all the files. Hard reset is only solution I know.
Dr.Sid said:
I couldn't uninstall HTC Dialer .. but it's some time ago. It simply didn't remove all the files. Hard reset is only solution I know.
Click to expand...
Click to collapse
Hardreset gets you back to the defaults including the default dialer. Did you manage with Hardreset? If so, explain.
Oh I see .. by HTC dialer you mean original Xperia dialer ? I understood you mean dialer from TouchFlo (which is in fact very very similar).
No idea then. Sorry.
Dr.Sid said:
Oh I see .. by HTC dialer you mean original Xperia dialer ? I understood you mean dialer from TouchFlo (which is in fact very very similar).
No idea then. Sorry.
Click to expand...
Click to collapse
Yes I mean the original dialer. I think it's HTC? Anyway I need to get rid of it...
hello to everybody.
I am experiencing a big slowdown using htc dialer: sometimes it freezes, sometimes the buttons are not functioning even if I press them...and of course when I am phoning...for example I have troubles in pressing the keypad softkey to use the dialer...or to turn on the speaker...
I use the rom in my signature and S2u2 2.34.... no special registry tweaks or strange apps... if I hard reset it works for some hours and after that it starts freezing... I read somewhere it is a know bug of htc dialer... How can I replace it? maybe with another app? using ms dialer? and in this case, how to switch to microsofts' one smoothly?
thanks in advance
all the best
http://www.iconsoft.com/?language=en&menu=62e094db10fc83b1
thanks for the tip.
but does it overwrite completely htc software for calls?
I installed inesoft phone trial software just to check...
I have the same issues, so for sure it is a problem related to WM.
Both htc dialer software and inesoft for sure use the same layer....
ahhhh, wtf....
I'm about 99% sure it has to be something specific to what 3rd party software you've installed, because on the same ROM, I didn't experience this, but I did not use S2u2, so if I had to guess, this would be my first place to look. Have you tried uninstalling S2u2 2.34?
yes, I do mtty everytime I flash, and I flashed so many times I stopped counting.
if this is real (3rd party software in conflict) it's a big problem...
which one? I always installed more or less the same software and if I start to check it manually well, I need 1 week...
thanks for the reply anyway.
I am trying S2u2 now... I will post here news
it seems not to be s2u2 or the colored taskbar I use...
I will try hard reset and then one apps at a time... but when I'll have time.
for now, I can live with it...
I am using hard key for ending call... keypad sometimes works, sometimes not...
uff...