hey.i have an urgent request,and i hope anyone can help me.i opened back cover in x1,above,because i want to try to fix my on/off button.i take all things very gently.i saw i can't fix that,so i put all together.now i have an issue.when i turn on my camera,i have black screen,and phone freeze after a few seconds.i can see the edges in my screen,so probably not a camera issue itself.it is there any sofwtere or something,that i can fix that=i didn't touch camera when i take apart my x1.i was very gently in all steps.
help
Related
I brought a black casing for my I mate. I took my my I mate to a mobile repairing shop for changing the casing.He broke the LCD Strip and He replace
My LCD with the new one and he change the screen.Now I am faceing a Problem
in my I mate Jam. My screen start shaking and it react strangly. When I press power button backlight go off and again I press power button screen become alright no shaking for just few second. After few second it again start shaking and display become worse like all the colour are spread on the screen.
Please help me out what is the problem.Why screen is shaking like this?
I have again install the firmware but nothing happen please Help me out
Screen went white & buttons didn't work.. took to get phone fixed... and...now buttons work but the screen has a weird yellow tint
what is the problem, and how to fix
bump. anyone?
Can you say a bit more about it. How strong is this yellow tint. Can you upload a picture.
It's difficult to know if this is caused by a new screen that has a faint yellow tinge or whether it's a definite fault.
Mike
My phone started getting the white screen issue, the buttons stopped working.
When I'd turn the display on, it would be all white, id have to press it a few times then it would be ok, the buttons seized to function.
I took it to get fixed, the buttons now fully work, but the screen has a weird yellow tint all over. It didn't have it before. I was mad at the repair shop, the guy told me that its the LCD screen connector cable or whatever... but I don't believe him, as he doesn't seem to know wtf he is saying..
please help
Mine started doing this recently. Screen fades to white and nothing works but I can still hear if I'm on the phone. For me, turning it off and back on resolves the issue (I can see the display again). I suppose some aren't so lucky..
More than likely the LCD connector cable has a problem. Why he didn't fix it, I have no idea. If you feel up to taking it apart, you may be able to push the connector in further, OR you could buy a new screen. Then again...
Hi there
I have rebuilt many hermes with the same problems. I researched the issues on here and elsewhere - Its nearly always related to the entire Dpad/cable/connections . I have repaired nearly all of these quite simply by dismantling them and adjusting/cleaning and reassembling them - things move and get out of contact etc and this is what happens with these - get a torx driver and have a go - after a few tries you will usually solve the problem
Happy to assist anybody who would like a hand
Kind regards
John
Hi everyone,
I recently changed my HTC's Aria digitizer because it was cracked.
During the process everything went smoothly however after that I have discovered that when a person calls me or when I call someone the screen turns off and never gets back to normal if there is no other "stimulation" such as putting the phone to charge for example.
My guess was there was a problem with the sensor so under settings I chose to keep the screen awake at all times during a phone call, still, I am having the same problem.
The weird thing is that sometimes when I remove the battery cover everything works fine and the screen keeps on, but sometimes not, so its not a constant rule..
I may have messed up something during the replacement of the digitizer (its just the glass not the lcd) such as removing the sensor and not placing it back correctly but the thing is that I dont really know the components of this device so Im not sure what is what..
If anyone could help me to understand the problem a little bit I would really appreciate it.
Thanks in advanced..
Anyone? Please
The sensor is right above the AT&T logo. If the little rubber ring isn't perfectly aligned with the sensor, you will have this problem. My wife's phone has a similar problem and it is fixed (temporarily) by firmly pressing on that corner. The adhesive strips have failed and I am looking for a source besides "Repairs Universe".
Thanks a lot!
I will try to take apart my Aria again and see if I can align it correctly
thanks again
glad that i found this, having same issues with my wife's aria, will give it a shot
When i make a call the screen turns black and sometimes the phone crashes
Can somebody tell me what the problem is ?
skrie said:
When i make a call the screen turns black and sometimes the phone crashes
Can somebody tell me what the problem is ?
Click to expand...
Click to collapse
When you place the phone near your ear when you are calling someone the proximity sensor will turn off screen light,is this the case?
Hello, in my experience, this happens if you installed some skins that sometimes conflicts with other system programs.
And so it sometimes goes to block or crash when using the phone call, sometimes when it comes into operation on lookscreen.
To understand skin: skin various widgets, widgets CHT, taskbar, etc..
The advice I can give you is to do a hard reset if you can not do proxy conflict.
First i would like to thank you for your response.
The phone turns black immediately after push call button or push the contact button.
I already tried a hard reset.
I'm sorry: you did a soft reset or hard reset? very strange .... your rom is cooked or original stock?
You do not have any spare housing that protects the phone and could cover the sensor? stupid question. but it is very strange.
Problem is solved. The glass has been repaired and the repairman has forgotten to remove a strip that covered the sensor.
Thanks for your help
OK! sometimes it happens .....
hi everyone, after some white stripes show up from nothin while i was using the gps and the weather was a bit hot and that maybe damaged my screen. So i changed the wole screen. Some white stripes shows up on screen when i put the back cover on. For example if i turn of and put the back cover and turn the phone the stripes will appear. But if i remove the back cover and turn on the phone it wont show up. And sometimes when i turn on the phone with the back cover the screen gets grey aand i cant see so i have to turn off and turn on again.
I think maybe the flex cable might be broken.
I tried dissembly the phone twice but the problem still here. I tried going back to stock rom(JB, KK and LOLLIPOP) but nothing help
if any1 know what is problem plz tell me adn sorry bad english
Edit:
The problem Was the flex cable that was broken