Hey you guys..!
When I recive a call on the X1, a little icon appears on the screen, which isn't easy to hit.. I miss the same "slide to answer"-design as seen on HTC-models or the iPhone..
I've tried S2U2, but it is not very good on the X1.. Some times I cant slide, and I cannot even press the normal answer-key..
Does anybody know if its possible to get the Slide to answer-interface from Touch HD..? Would be great on the X1..
Thanks
Just get that black dialer skin
It have some sort of slide to answer. Check it out.
Related
While browsing the xda forum, i found a thread with diamond phone canvas slide to answer/ignore function http://forum.xda-developers.com/showthread.php?t=464286 . is it somehow possible to run it on xperia? tried the one in the link, but couldn't succeed to load it properly... when someone calls me, i can't see anything, only sound, and when entering the phone menu, i can barely see the numbers in there surrounded by white colored areas.. has anyone tired it already?
edvardas.m said:
While browsing the xda forum, i found a thread with diamond phone canvas slide to answer/ignore function http://forum.xda-developers.com/showthread.php?t=464286 . is it somehow possible to run it on xperia? tried the one in the link, but couldn't succeed to load it properly... when someone calls me, i can't see anything, only sound, and when entering the phone menu, i can barely see the numbers in there surrounded by white colored areas.. has anyone tired it already?
Click to expand...
Click to collapse
just download itje's touch hd dialer (blacksone dialer), and ther you go.
edvardas.m said:
While browsing the xda forum, i found a thread with diamond phone canvas slide to answer/ignore function http://forum.xda-developers.com/showthread.php?t=464286 . is it somehow possible to run it on xperia? tried the one in the link, but couldn't succeed to load it properly... when someone calls me, i can't see anything, only sound, and when entering the phone menu, i can barely see the numbers in there surrounded by white colored areas.. has anyone tired it already?
Click to expand...
Click to collapse
I have that feature in my SPB Pocket Plus and you slide to turn off keylock then press the answer button to answer any call.
dloaded the blackstone dialer, but after long installation, at the end it just failed. i tried it a few times again, and still the same error appears.. any ideas?
Try Inesoft Phone it works on mine.
Hi,
I have a WM6.5 rom and when someone is calling me I get a simple popup window and two softkeys at the bottom: accept, reject. I read that when the screen is locked, there is a different incall screen, where you have to slide to answer or ignore. I do not lock my screen, so would it be possible to have the better incall screen by default?
Thanks a lot for the replies.
The app being mentioned is A_C's S2U2 and it provides a full screen pop-up for contact pictures.
I ran without a screen lock for a while until my pocket made a call and used up the £15 of just applied top-up. Now i use S2U2 and have yet to have any problems.
Thanks, will try it tomorrow
Kamill said:
Hi,
I have a WM6.5 rom and when someone is calling me I get a simple popup window and two softkeys at the bottom: accept, reject. I read that when the screen is locked, there is a different incall screen, where you have to slide to answer or ignore. I do not lock my screen, so would it be possible to have the better incall screen by default?
Thanks a lot for the replies.
Click to expand...
Click to collapse
you can also try this one, i think this is what u are really looking for http://forum.xda-developers.com/showthread.php?t=493593 the latest version is on post 20.
Thanks, but I've found an ideal solutiuon - AutoLock. Now the screen is locking on an incoming call and I get the sliders
Hello all,
I like having my phone locked on the Windows Classic lock screen, as it means I can see the Manila homescreen when the screen is locked (unlike the slide to unlock of the Windows Default screen).
However, when I receive and incoming call on the Windows Classic lock screen, I am first asked to unlock the device, before I can answer the call with the Manila answer slider.
This isn't the case with the default lock screen.
Does anyone know if there is a workaround for this? Or some fix?
Or do I just need to get used to the Windows Default slide to unlock screen?
Thanks ^^
Anyone got any ideas if there anything we can do about this?
80 page views and no one has any ideas.
Hey again guys,
Sorry to bump this, but I was wondering if anyone knew/knows of a way around this. Basically, what happens, is this:
When the phone uses the Windows Classic lock screen (ie what it used to have on WinMo 6.1, not slide to unlock) when someone phones me, the phone brings up the unlock button to press, before I can use the slider to answer the call.
As far as I remember, it only did this on my X1 when I switched to itjes Leo 10 version, which had the Manila version our phones had.
It's a bit annoying, as I like to have my phone locked on the Manila home screen, but having to unlock the phone before answering a call is very annoying.
Maybe someone has an idea of a fix, or a work around to stop it bringing up the unlock button?
Hum and what if you just press the real physical answer button ?
piflechien said:
Hum and what if you just press the real physical answer button ?
Click to expand...
Click to collapse
I could do that yes. But the screen stays locked with the unlock button on the screen. So it still doesn't really fix anything other than being able to answer the phone.
I was wondering why it does this (always used to bring up the slider on Manila 2.1 on my X1) just wondering why it doesn't with WinMo 6.5 and HTC Sense on.
Anyone managed to get this to work yet?
Can't get the screen to auto-unlock when someone phones =(
Still having to use the slide-to-unlock slider. Oh well.
Sometimes my device is in the jeans and then people call me and when I want to get him out jeans So it pressed on the keyboard and sometimes I lose the call because it presses END
How can I disable the keyboard when people call me?
That means I will answer only through the Slide ...
my phone : HTC TOUCH HD \ WVGA
tnks shlomi
Hey Dude
i know its a super late reply but i was reading up on some bits and thought i'd shed my 2 pence worth.....
Download 'HD Tweak' and you can single handedly change the Message pop-up not to turn the phone screen on when it arrives, and also you can change what you need i.e disable slide lock and replace with Push lock for hardware buttons give it a try!
HD Tweak!
i'd also push you to download FingerKeyboard WVGA 2.1
Best upgrade on the Touch HD!
Hey guys, I'm running a Sense build (Phiremod's Ace build) and having a problem with the HTC dialer's answer/reject call slider. (note that this is a problem with any of the Sense builds - not picking on Phiremod's.)
I pocket carry my HD2 and since the Sense answer/reject is an up and down slider, i always wind up answering or hanging up the phone when I pull it out of my pocket.
Does anyone have any ideas to change the incoming call behavior? I know I can remove the HTC lock screen, but the answer/reject slider is apparently part of the dialer (which I love otherwise). I used S2U2 on WinMo, and have been digging around for an Android alternative. Is there any way to get the stock Android answer/reject slider (left to right) on Sense without losing the HTC dialer?
Thanks,
Ryan
+1. Have the same problem
+1, the sense lockscreen makes no sense. Unlocking in pocket, answering can be done just by looking at it from wrong angle...HTC must come up with something quick. Can't even call that a lockscreen
Sent from my HTC HD2 using XDA App
+1
happened a lot of time to me... I'm happy to know that I'm not alone...
Im not sure why HTC made the slide up and down like that it really doesn't make any sense. On the WimMo sense it slides side to side.
Count me in Big relief to see others with the same "challange". In my case it often answers call without me knowing it when its in my pocket.
+1
This is the only reason I avoid Sense. Phone upside down with the screen facing my leg is the only position that works (ie makes it easy to check the screen by pulling it out of my pocket). Unfortunately, that also declines every call I try to answer.
+1 !!! anyone?!?!
solution found!
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
I had this problem also. Just go to system/app and you'll see htclockscreen.apk and htclockscreen.odex. You can rename or delete them but I just moved them to a folder within system/app so they're not loaded. Once done, reboot and you'll get the stock lock screen.
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
omricn said:
OK i hope you guys see this - i found a solution -
just install this .apk, it presents a screen with two simple buttons (answer\decline) instead of having to slide. works like a charm no more leg\but answering declining calls
Click to expand...
Click to collapse
You wanna printscreen that app?
Sent from my HTC Desire using XDA App
omricn said:
hey tnx mr_dilly, i actually know that, but even after going back to the stock froyo lockscreen, when getting a call you still get the htc answer\decline slide screen which is, as mentioned, crap..
Click to expand...
Click to collapse
Sorry, omricn. Overlooked that bit. I thought the slide to answer went away because I got the answer/reject buttons but apparently it changes once the phone is actually locked.
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Bib_x said:
I use a android build without sense. Is there any app to unlock power button?
I often get a call while my phone is in my pocket and then accidently press my power button, so the call will be rejected.
Click to expand...
Click to collapse
are you sure the power button is the issue? how does your incoming call screen look like? it could be the same issue that i had, the slider responded to the insides of my pocket, i dont believe the power button is being pressed unless you're wearing very very tight pants
I don´t have a sense build.
I get no slider, only the answering buttons on my screen. But hardware buttons are working too. When i put my phone from my pocket i often touch my hardware power button and then the incoming call is ended.
I use proximity screenoff, so screen is blank and i can´t touch any button on my display. If i press power button, the incoming call is rejected.
I want to have a slider on my display and hardware buttons should be locked complete. Only answering a call with something on my display, but not with hardware button.
understood.. i'll be sure to let you know if i find a solution
Hi All!
The biggest problem with Sense in my opinion is the slide for unlock/answer screen. The engineer that came up with that design should get a serious *****-slap. Replacing the lock screen is fairly simple though, e.g by WidgetLocker. Replacing the slide (up/down) to answer is not that simple because it's part of the dialer, not the lock screen.
So if you like HTC sense and the sense dialer, I think you have to stick with the slide up/down for answer. I'm sure that some clever dev eventually will iron out the problem, but currently I see no solution.
Agree with every word..