does Xperia X1i not work properly in canada? I tried selecting the GSM band, but after a minute or two...it automatically connects to Edge..(i get the "E" symbol at the top of the screen.
whenever it connects to Edge..i can no longer make/receive both calls and sms.
is there any way to make it work? the phone works perfectly in asia
Related
Hello,
I have a DOPOD D810 and using with Vodafone-SP. When I have the 3G on the calls least about 11 seconds (sometimes 9 seconds) and without 3G (the old GPRS) the phone calls work perfectly.
Anyone had the same problem or know why it's happening?
sometimes, when iam connected with pc (usb) and share internet connection to it. i dont try it with gprs.
but when i have 3g connection without pc, works perfect
Is HSDPA in your region? Because i think i have read some posts where the HSDPA implementation makes that problem. Just turn off HSDPA support and see if its ok.
i dont know, but icons switching between 3g and H
i'm having the same problem too. The calls will drop in less than 10secs in 3G mode but with normal calls. Checked with the network provider and the Dopod HQ. Network provide says it could be the hardware problem and the Dopod HQ says it could be the network problem.... this is making me sick. And some Expert says this is normal to PDA's 3.5G phone.
Basically I can say that depends of the cell, I mean, sometimes 3G calls works fine and sometimes not, usually the ones who doesn't work fine are in different 3G cell (becasue I'm in different location).
So, can be both, a network problem (some software or hardware in the cell antena) and the phone (who don't 'talk' with the cell properly).
I search and a lot of spanish Vodafone users (Trinity) have the same problem.
just noticed that after softreset the 3G signal becomes perfect and calls signal will stay strong. But after i awhile without making calls out or incoming calls. Then the nightmare happens again. Checked with the Dopod hardware HQ, they says if the 3G signals drops then the GSM will drops too. So, it couldn't be the hardware unit problem.
Hey, I've got the x1i (vodafone branded) for a while. This phone works perfectly in asia...but it doesn't seem to work here in Canada on fido.
Whenever I turn on the phone it connects and shows a "G" symbol. Whenever the "G" shows up it works..i can make/receive calls and sms...However, after 20 seconds or so..the "G" symbol switches to "E". Whenever "E" (edge i suppose), i can no longer make/receive calls and sms.
I tried dialing a number..but there's no dial tone and such. ANybody knows what's wrong?? I tried selected the GSM band but it doesn't work.
I only have the voice plan with Fido. Do i need the data plan to be able to use the xperia x1i???
i also tried flashing the phone with the x1a north america rom..but i get the same results...
any help would be appreciated
Hello there!
I have a HTC Hermes phone.
Where I live there isn't 3G coverage at all.
When I am in places where is good 3G coverage the phone works well on 3G networks.
When I use EDGE or GSM networks it fails randomly.
I cannot make phone calls, and people whose call me get the sound "The call partner is not available."
Now I am using Windows Phone 6.5.
When I used other versions it wasn't work either.
Now I have radio 1.41.00.10
What settings should I use?
Please help!
Did you try to turn off (UMTS) 3G?
It is in CommManager?
Thanks for your reply!
Yes, I have tried this, it change network type to GSM, and network to EDGE.
But, after that it does the same.
Calls sometimes work, sometimes not.
And all the time the signal quality is almost full.
But I run into an other thing.
When I want to set to send my Caller ID, I tap get settings in the Comm Manager, it shows the message "Cannot read settings from the network. Try again later or disconnect data connection and try again"
What data connection does it mean?
Today i flashed my HTC Touch HD with this rom (STONEHENDGE), Now for some reason i cannot get my 3 network to work atal.. Cannot make or recieve calls. It shows an exclimation mark next to the network signal icon. Also when i press find network in network selection it only finds o2 tmobile orange and vodaphone.
Any help? Is it maybe the radio needs updating?
Might sound obvious, but you have checked the UMTS band is 2100 (or Auto), and the phone has 3G enabled in comms manager?
If it's finding the 2G networks but not Three, sounds like phone is set to GSM only, sometimes happens ater a new ROM.
hey all
i've got a problem with my droid pro in eu on gsm/umts network.
when i'm roaming and use gsm only (no umts) my mic and speaker are dead. i can make a call and receive it, but i cant hear anything and caller doesnt hear me. display shows seconds have past so line is opened. i can even receive sms and mms just fine and send them, only cals dont work.
if i change from gsm to umts only, then calls work fine. when im on home network everything is ok.
funny thing is, that if i make a call on roaming in umts only and then change to gsm only i can receive first call, then it's all blank again.
i have stock rom
tnx
teva
probably the problem was with the network where you was located. did you tried another network?
my droid pro works nice in roaming, in both gsm and umts.
I am facing a similar issue.
2G 900/1800 Mhz -- Voice & Data Work fine.
3G 1900 Mhz --- No Voice, Phone re-boots. Data works.
So I have to use the phone in GSM only mode.
I am on 2.3.3 / Verizon 4.6.4 update.
My new operator have same issue! (no with the old operator!!)
In a specific location i can't make/receive a call in only 2g (i can send/receive sms and data traffic is ok)... But if I switch in 3g i can do everything...
For my operator it is an issue between sim (by ORGA) and droid pro and so I'll replace my sim...
I didn't find non ORGA sim, but i have bought a dualsim adaptor, for seeing... Nothing...!
On my operator (TIM), when i'm on edge in only same locations, i can't make/recivie calls... Not with my ex operator (wind)..
But... you can try to compose on your dialer ##7764726 then call, then password 000000
verify
06 test mode
next
next
service option switch to 13k, or others, then back...
Make a call, or try this configuration
if you restart your phone you must reselect this...
Tomorrow i'll try...