hey all
i've got a problem with my droid pro in eu on gsm/umts network.
when i'm roaming and use gsm only (no umts) my mic and speaker are dead. i can make a call and receive it, but i cant hear anything and caller doesnt hear me. display shows seconds have past so line is opened. i can even receive sms and mms just fine and send them, only cals dont work.
if i change from gsm to umts only, then calls work fine. when im on home network everything is ok.
funny thing is, that if i make a call on roaming in umts only and then change to gsm only i can receive first call, then it's all blank again.
i have stock rom
tnx
teva
probably the problem was with the network where you was located. did you tried another network?
my droid pro works nice in roaming, in both gsm and umts.
I am facing a similar issue.
2G 900/1800 Mhz -- Voice & Data Work fine.
3G 1900 Mhz --- No Voice, Phone re-boots. Data works.
So I have to use the phone in GSM only mode.
I am on 2.3.3 / Verizon 4.6.4 update.
My new operator have same issue! (no with the old operator!!)
In a specific location i can't make/receive a call in only 2g (i can send/receive sms and data traffic is ok)... But if I switch in 3g i can do everything...
For my operator it is an issue between sim (by ORGA) and droid pro and so I'll replace my sim...
I didn't find non ORGA sim, but i have bought a dualsim adaptor, for seeing... Nothing...!
On my operator (TIM), when i'm on edge in only same locations, i can't make/recivie calls... Not with my ex operator (wind)..
But... you can try to compose on your dialer ##7764726 then call, then password 000000
verify
06 test mode
next
next
service option switch to 13k, or others, then back...
Make a call, or try this configuration
if you restart your phone you must reselect this...
Tomorrow i'll try...
Related
Hey, I've got the x1i (vodafone branded) for a while. This phone works perfectly in asia...but it doesn't seem to work here in Canada on fido.
Whenever I turn on the phone it connects and shows a "G" symbol. Whenever the "G" shows up it works..i can make/receive calls and sms...However, after 20 seconds or so..the "G" symbol switches to "E". Whenever "E" (edge i suppose), i can no longer make/receive calls and sms.
I tried dialing a number..but there's no dial tone and such. ANybody knows what's wrong?? I tried selected the GSM band but it doesn't work.
I only have the voice plan with Fido. Do i need the data plan to be able to use the xperia x1i???
i also tried flashing the phone with the x1a north america rom..but i get the same results...
any help would be appreciated
Hello,
I want to use my HTC HD2 as a internet only device with 3G.
Is there a way to disable GSM + SMS and only use 3G ?
In the phone settings you can force use of WCDMA (3G) and no GSM, but you'll still have SMS and phone, I don't see the point, apart from reducing your network coverage. If 3G is there it will always use it preferably, if it switches to GSM it's because there's no 3G coverage...
kilrah said:
In the phone settings you can force use of WCDMA (3G) and no GSM, but you'll still have SMS and phone, I don't see the point, apart from reducing your network coverage. If 3G is there it will always use it preferably, if it switches to GSM it's because there's no 3G coverage...
Click to expand...
Click to collapse
Ok let me try to be more clear
I dont like the phone function of the HD2, I prefer a full QWERTY device.
So I have a dual sim
1. Nokia E72 for calling & SMS
2. HTC HD2 for internet
I want to receive my calls on my E72 and use the 3G internet on my HD2.
So I have to disable incoming phone calls and SMS on my HD2....
Yes, it sound stupid I know
Hmm I don't think that's possible...
But doesn't your operator do that automatically? I have a dual SIM too, but have to set one as active, and only the "active" one will receive call and SMS, the other can be used to place calls and use data but won't receive anything... it wouldn't play nice if your 2 phones received the same SMSs or rang at the same time when called...
Today i flashed my HTC Touch HD with this rom (STONEHENDGE), Now for some reason i cannot get my 3 network to work atal.. Cannot make or recieve calls. It shows an exclimation mark next to the network signal icon. Also when i press find network in network selection it only finds o2 tmobile orange and vodaphone.
Any help? Is it maybe the radio needs updating?
Might sound obvious, but you have checked the UMTS band is 2100 (or Auto), and the phone has 3G enabled in comms manager?
If it's finding the 2G networks but not Three, sounds like phone is set to GSM only, sometimes happens ater a new ROM.
In device info I find several options for the network mode: lte/gsm, lte/cdma, or lte only, but I want something like lte preferred. If I switch it on lte only, phone calls or sms stops working (can't receive or send). Is there anything I can try to prefer lte all the time? My Vodafone carrier in Romania doesn't support VoLTE and whenever I make a phone call it goes to 2g, then it takes a few seconds to switch to "H", but it almost never goes directly to 4g. I'm also rooted so some exposed module or something similar would also be appreciated.
Basically what I'm looking for is to prioritize lte all the time, but switch to 2g/3g when I make a phone call or there is no 4g signal. Can anyone help me out pls?
Hello,
i'm using redmi note 4 snapdragon 3/32 version for almost 1 year 6 months.
Suddenly i am facing network issue.
Though the network bar shows full network but still not receiving any call neither i can call others.
If i change network to gsm only it seems works for a while
but i want a permanent solution.
*i reset phone. Even tried different rom*
if this is a hardware issue. Is this critical?
Thank you.
Maybe it's related to your operator
Some operators switch from 4g to 3g or 2g when you receive a call or try to call someone
maybe your operator has a problem with this switch and so you are not able to call and receive
Angelo Azzurro said:
Maybe it's related to your operator
Some operators switch from 4g to 3g or 2g when you receive a call or try to call someone
maybe your operator has a problem with this switch and so you are not able to call and receive
Click to expand...
Click to collapse
thanks//