Hi,
first af all I would like to say that i'm not a developer!I just build a little app
to facilitate our every day life.
Then I would like to say that i won't be responsible on any damage that little app could do.
So I made a little App to backup and restore your cemail.vol (containing your SMS or text messages) easily.
It's based on mortscript app (which is very very great).
Installations Steps:
-Unzip B&R on your Ppc (Internal Memory or Storage card As you want)
-Run "MortScript-4.0-PPC.cab" (install it in internal memory or storage card should work for both)
-And at least run "Back&Restore.mscr"
You'll be prompted if you want to backup or restore
and then you'll be prompted again if you want to restart your device or no.
As the backup or restore work at the starting of the device if you know what you are doing I suggest to reply yes, otherwise nothing will backuped or restored.
For those who are interested in this is the source of this little app:
Code:
errorlevel ("warn")
Choice( "SMS B&R","Restore or Backup","Backup","Restore" )
Case( 1 )
Startup = Regread ("hklm" , "System\Explorer\Shell Folders" , "Startup")
back = "XCopy \cemail.vol , ""\Storage Card"" , 1"
delb = "delete " & "(""" & Startup &"\backup.mscr"")"
delete (Startup &"\restore.mscr")
delete (Startup &"\backup.mscr")
WriteFile( Startup & "\backup.mscr" , back & "^CR^^LF^" & delb ,1 )
Case( 2 )
Startup = Regread ("hklm" , "System\Explorer\Shell Folders" , "Startup")
rest = "XCopy ""\Storage Card\cemail.vol"" , \ , 1"
delr = "delete " & "(""" & Startup &"\restore.mscr"")"
delete (Startup &"\backup.mscr")
delete (Startup &"\restore.mscr")
WriteFile( Startup & "\restore.mscr" , rest & "^CR^^LF^" & delr ,1 )
Case( 0 )
Message( "Cancel" )
Exit
EndChoice
Choice ("Reset", "Do you want to restart de device?","no","yes")
Case( 1 )
Message ("Be careful : Backup or Restore Cemail.vol only work if you soft reset your device")
Case( 2 )
reset
Case( 0)
Message ("Be careful : Backup or Restore Cemail.vol only work if you soft reset your device")
exit
EndChoice
Bye
Herc.
Thanks for this, been wanting to backup cemail.
I've tested it briefly on my HP RX1950, but nothing is created after restart. I've tried with a few different storage cards but no luck. Any ideas?
As you can see file creation refers to Startup(folder) Value in Registry.
So it can be 2 things
1-The startup folder is not in the same place as mine in the registry (but I doubt about that)
2-The Mapi services which use the file cemail.vol start before my script.
So to check that, launch the backup but don't restart the device and go look
into \windows\startup to see if there is a file called Backup.mscr, if yes open it with a notepad and send me the content of the file.
I'll try later to make a log script file to debug these kind of problems
Bye
Herc.
Well the startup folder is in the correct place in the registry, and backup.mscr is in the startup folder.
The contents is as follows;
XCopy \cemail.vol , "\Storage Card" , 1
delete ("\Windows\StartUp\backup.mscr")
Ok,
So could you:
-Tell me what device do you own and which rom your are using.
-In the registry in [HKLM/init] could you give me your launch values.
(ex: Launch10 Shell32.exe, Launch20 Service.exe etc...)
Bye
Herc.
hercule18 said:
Ok,
So could you:
-Tell me what device do you own and which rom your are using.
-In the registry in [HKLM/init] could you give me your launch values.
(ex: Launch10 Shell32.exe, Launch20 Service.exe etc...)
Bye
Herc.
Click to expand...
Click to collapse
The device is a HP Ipaq RX1950, rom is the standard HP rom version 1.01 (english).
Launch values:
Launch10 shell.exe, Launch20 device.exe, Launch21 coldinit.exe, Launch30 gwes.exe, Launch35 wifioff.exe, Launch50 shell32.exe, Launch60 services.exe, Launch61 ciphase2.exe, Launch70 connmgr.exe, Launch80 srvtrust.exe
Thanks
i was looking for some way to perform this operations and i have to say that this thing work perfectly on my TyTN (hermes) with mobile 6. For i moment i thought that i could write something in CF, but probably it wouldn't work cause it will need the system fully uploaded.
nice work
I see another way to backup SMS.
There are many programs which do backup SMS, and at any time, and not just during reboot device. For example, smsorganizer (www.zedsoft.net). But this program not work in a mode such as command line.
If there was such program would not be to do a problem backup sms when it is necessary, either under the schedule, or on event. For example, to start the program at incoming sms by means of SKScheme or another.
And then questions with copying cemail.vol will disappear all.
I also used this kind tool to backup cemail.vol by celecmd, but this time.. when I try to backup cemail.vol now, it dosn't work, both this mortscript tool or that celecmd tool. It seems after reset, another system application lock this cemail.vol before backup tool start.
Does anyone have an idea?
I have resolved my problem, maby helpful to you:
1. set "Today", cancel items outlook-related;
2. delete poutlook link in \windows\startup.
I backed up cemail.vol manually through "Mobile Device" in XP, and now I'm trying to figure out how to copy the backed up file back onto the device after a hard reset, but I'm not having much luck. I created "aa.mscr" in my \Windows\Startup directory, but nothing I put in it works:
Code:
Rename ("\goodcemail.vol", "\cemail.vol", 1)
Code:
Rename "\goodcemail.vol", "\cemail.vol", TRUE
Code:
Delete "\cemail.vol"
Rename "\goodcemail.vol","\cemail.vol"
The files are unchanged after I soft reset.
What am I doing wrong?
According to this page:
In WM 5.0 you can not rename, delete and etc. '\cemail.vol'. It is placed in distinct storage.
Click to expand...
Click to collapse
So how does your code do it then?
Ooops. This thread says to place a shortcut in the Startup directory, not the script itself. I'll try again when I have a chance.
endolith said:
Ooops. This thread says to place a shortcut in the Startup directory, not the script itself. I'll try again when I have a chance.
Click to expand...
Click to collapse
Nope. That doesn't do anything either. How do I restore cemail.vol?!
I removed everything from the Today screen and restarted, and the script worked! I think I could actually delete the file manually now, since it's not being used by the Messaging part of the Today screen.
So where do all the settings for Exchange Activesync and POP account info live? I want to be able to back these up and restore them after a reflash. Any Ideas?
OK, tried removing everything from today screen as someone stated, tried deleting the poutlook.lnk from stratup. I am on Raphael(Fuze) running my own cooked ROM. I would ike this to work so I could cook in a script to copy these files back on startup. Could prove very handy as I am flashing a lot of ROMs lately. Any help appreciated.
On a WM5 MotoQ I was having a hell of a time getting a backup of a clean cemail.vol file from a freshly flashed phone. Come to find out I had not unlocked its registry. From CeRegistry editor v0.0.4.4 I chose "unlock registry" from the tools menu then made the following edits
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1001 = 2
Change to 1
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1005 = 16
Change to 40
HKEY_LOCAL_MACHINE\Security\Policies\Policies\0000 1017 = 128
Change to 144
HKEY_LOCAL_MACHINE \Security\Policies\Policies
New Dword value "0000101b" = 1
What does restore do ? is it to delete off the old one and replace a new one ?
if it is , it doesnt help my wm6.1 asus p320 .
how to download this app.
it just displays a small picture when clicking the donwload link.
My unit has been freezing up after some use. When that happens, my TenGO input method reverts back to the default tiny keyboard, which of course is unuseable in true VGA mode. I traced the problem to the fact that my browser had stored lots of files within the device and caused the memory availability to fall, depriving it from the programs.
I changed these browser files location to the SD card, and my TenGo input method right away came back by itself. The system also revert back to the normal quick speed.
None of these ideas originated from myself. There are many websites giving these tips.
Changing the IE brower cache, cookies, and history location:
---------------------------------------------------------
The IE working files are by default located at :
\windows\profiles\guest\temporory internet files
\windows\profiles\guest\Cookies
\windows\profiles\guest\history
First, use Files Explorer to create these directories at storage card:
\windows\profiles\guest\temporory internet files
\windows\profiles\guest\Cookies
\windows\profiles\guest\history
Then Use a registry edit tool,go to
\HKCU\Software\Microsfot\Windows\CurrentVersion\Explorer\Shell Folders and change the Cache,Cookies, and History value to \Storage Card\Windows\Profiles\Guest\Temporary Internet Files,..... etc
If you prefer not to edit the registry directly youself, you could alternatively, use SKtools (I use version 3.1.5) to do the following:
Start SKTool, then click Tuning
The first tab shows the current location of the above. Change it to the new locations: ie
Storage Card\windows\profiles\guest\temporory internet files
Storage Card\windows\profiles\guest\Cookies
Storage Card\windows\profiles\guest\history
Exit SKtools
Switch off the device for about 20 seconds before doing a reset. It is important that you do not do reset right away else the registry entry may not be effected. The switching off will cause the system to write out the new registry entries.
With that, its done for Internet Explorer.
Changing the Cache, cookies, and history location for Opera Mobile
----------------------------------------------------------------
Ensure Opera is not running before you begin.
First,create these directories using file explorer:
\Storage Card\Application Data\Opera
\Microdrive\My Documents
Then, copy Cache4, cacheOp Help imgcss skin strtpage style directories to \storage card\Application Data\Opera.
After the copying is verified to be accurate, clean the content in the above directories in the device, but leave the directory structure there (with empty content) just in case.
Then, transfer these files from device to storage card by cutting these file from device and pasting to storage card
-browser
-chartables
-cookies4
-global
-htm40_entities
-opcacrt6
-opera.dir
-operand
-opssl6
-vlink4
Leave these in device directory :
-brwoser
-de
-englihs
-html40.entities
-input
-ja
-nl
-opera.ini
-opera6.adr
-pl
-ru
-zh-cn
-zh-tw Note: I think this list of languages differ from country to country. Notice that I've replicated browser and html40.entities in both location because none of the websites I read mentioned them. I leave them at both location to ensure it will still work, but I'd later on tried removing them from one location at a time to establish where Opera would look for these files.
Make changes to Opera.ini file
----------------------------
Initially, I tried to use Note application to open Opera.ini, but found out that it can't seem to "see" the file. Same goes for Pocket Word. I could'nt find the solution from other website, so I decided to use the desktop notepad text editor to edit it.
a) Establish activesync, on PC, use explore button to copy from device\Application Data\Opera to say the desktop.
b) Use the desktop notepad to open the Opera.ini file, and make the following changes to these entries:
- Opera Directory=\Storage Card\Application Data\Opera
- Help Directory=\Storage Card\Application Data\Opera\Help
- Button Set=\Storage Card\Application Data\Opera\skin\windows_skin.zip
- Download Directory=\Microdrive\My Documents
- Home URL=\Storage Card\Application Data\Opera\startpage\home.html
c) Then save the document as Opera.ini, and make sure encoding is UTF-8
d) Copy back the edited Opera.ini from desktop to the Device's main memory. i.e \Application Data\Opera
Its done.
I'll continue to monitor the device performance over the next few weeks and see if the freezing still happens.
Isn'teasier just to use the .cabs available for free from MoDaCo?
Confucious said:
Isn'teasier just to use the .cabs available for free from MoDaCo?
Click to expand...
Click to collapse
Hi confucious,
I'm not aware of a CAB that automates this. Could you post the link for the CAB?
Anything that makes life simpler is welcome.
PIE in this thread -> http://www.modaco.com/Pauland39s-must-have-FREE-Hermes-software-t243906.html
Opera here -> http://www.modaco.com/index.php?showtopic=253909&hl=opera
HTH
Customizing the autocorrection in WM6 has been done, but WM6Pro is a bit different. This is the "can't live w/out" feature for past BlackBerry owners which allows you to type something like "brb" in and email and have the system replace it with "I just stepped out, but will respond when i get back."!
Figgured out how to do this on WM6pro from the device itself. The easiest way is to use Total Commander (3rd party file explorer). WM6pro requires that the autotext.0409.txt file be saved in unicode. it also protects the file in 3 ways: it sets the ReadOnly bit; it sets the SystemFile bit; and it watches the file from boot to make sure you don't change/delete it, but it will allow you to rename it. After figguring this out, i came up with the following process to update it:
1) open Total Commander and navigate to and highlight the \Windows\autocorrect.0409.txt file
2) copy the file to the root folder
3) navigate Total Commander to the root folder and highlight the \autocorrect.0409.txt
4) in the properties of the file, turn the ReadOnly and System bits off
6) click the notepad icon at the bottom of Total Commander to open the file in notepad
7) make your changes to the file minding the required alphabetical ordering
8) save the file as a unicode text file with a slightly different name (autocorrect.0409new.txt)
9) copy or move the new file to the windows directory
10) rename the existing autocorrect.0409.txt file to autocorrect.0409orig.txt
11) rename the new autocorrect.0409new.txt to autocorrect0409.txt
12) reboot WinMobile6 Pro
13) if you want to clean up, you should now be able to remove the extra files we have created along the way.
items I added:
sm =
fr =
degs = [the degree symbol]
brb = I just stepped out, but will respond when i get back
ack = (sent from wireless device) I read your email and will respond as soon as I am able. Thanks!
keywords: ppc wm6 windows mobile autocorrect type ahead intellisense as you type keyboard shortcuts macro speed
very interesting, I'll give it a try !
thx for the tip !
1. Very useful and cool tweak, this will help me a lot! I am going to try and get it to work with dual languages and will report back, so for example I could type "CHbusy" and get "县在忙，一会儿给您回答“ to avoid having to change the SIP....great
2. THis will be a great prank, will wait until my bro leaves his phone unattended and go change things like "the=Nate, you are a jackass" it'll take him ages to figure it out!!
Hi,
i have just upgraded my topaz to the win6.53 latest htc Rom,
and i find the booting ring (first seconds when switching it on)
rather annoying (too loud) ; So how to make the boot silent?
Another worrying bug :
when device is locked , a "1" (missed call/new sms) appears
even if i'm cleanning the notifications.
And the ring choosen for new vocal mail rings after each softreset
even after cleaning the notification
thanks
For the first problem, try this:
- Create a empty .txt file in your pc
- Rename the .txt file to "HTC-QuietlyBrilliantBoot.wav" (no quotes)
- Copy the file to your phone's memory card.
- Use Resco Explorer or Total Commander and copy the file to Windows folder in the main memory, overwriting the old one.
While you're at it, do this too for the "opera9.exe" file (I use opera 10) and "copilot.wm6ppc.cab" (I don't use it) and save about 16 mb of space.
joooe said:
For the first problem, try this:
- Create a empty .txt file in your pc
- Rename the .txt file to "HTC-QuietlyBrilliantBoot.wav" (no quotes)
- Copy the file to your phone's memory card.
- Use Resco Explorer or Total Commander and copy the file to Windows folder in the main memory, overwriting the old one.
While you're at it, do this too for the "opera9.exe" file (I use opera 10) and "copilot.wm6ppc.cab" (I don't use it) and save about 16 mb of space.
Click to expand...
Click to collapse
Hi Joooe ,
many thanks that's quietly brilliant
good idea about copilot, i use zorro instead
Dear colleagues,
hope this post isn't repeated but I collect, filtered & tested information from other threads concering other HTC different devices and it works on my HTC Snap.
I syncronize a lot of emails with attachements and device memory was full. Then installed a 8GB Storage card but didn't find option to use it for messaging storage but other HTC devices as Kaiser & Backstone.
I did the following:
First of all you need a registry editor, there are many downloadable shareware on the web.
Email and Attachments on your Storage Card
Using the file manager in activesync, create the following folders
\Storage Card\Inbox\
\Storage Card\Inbox\Attachments\
(Of course u can name the folder what ever u want, but must use same nameson following configuration)
Then create the following STRING VALUES:
HKEY_Local_Machine\System\Inbox\Settings
Name: AttachPath
String: Storage Card\MAPI\Attachments
Name: PropertyPath
String: Storage Card\MAPI
Then go to HKEY_Current_User
go to Software, then Microsoft, then MAPI
Create them these entries:
a. Create “String”.. Enter name as “AttachPath” and Value:
String as “\Storage Card\Inbox\Attachments”
b. Repeat the same step for next entry… Create “String”
Enter name as “PropertyPath” and Value: String as “\Storage Card\Inbox”
Soft Reset sevice (not hard reset otherwise these changes will be restored to factory default)
Now browse to \Windows\Messaging\
Move everything in this directory to the new ones on your Storage Card.
Still checking if everything is roght but it seems it.
Regards.
DAMM!
Something is not quite good as new emails are stored at device \Windows\Messaging folder again !
Of course is able to read moved ones to Storage Card location, but this seems memory will be full if I don't move incoming msg's to Storage Card often.
Any suggestion before y crash WMM registry?
Thanks friends.