Related
There are many tweaks around but If you have resetted your phone you must look @ too much topics.
So why we don't make One bit tweak topic..
with only
tweak name
tweak explained
and maybe a link to a discussion topic/site
and offcourse a download link( if available)
and make this topic sticky.. So after a reset you only have to visit that sticky topic on XDA
an idea?? come on admins you can do it!!
I would very much encourage users to use the WIKI instead... forum posts could be made sticky, but things in a forum *always* get lost.
wiki.xda-developers.com
Pick a topic, here's a suggested one 'in line' with some other wiki pages:
http://wiki.xda-developers.com/index.php?pagename=HTC_Wizard_Tweaks
Those who prefer the forum - by all means... I'd ask those who know how to work the wiki to add tweaks as they'd come in, here, though
I vote for this thread to get stickied. I think more people check the forums than the wiki, me included. Here are some things I've found from random places. I have not tested them all. These are all things copied from elsewhere. I claim neither credit nor responsibility.
SPEED INCREASE
I've been goofing around with registry values in WM5 now that I have upgraded. I could be completely crazy, but it seems that hickups that I was having are now gone after I made these changes. Anyone else who has upgraded want to try these changes out and see if things are any better?
You're going to need a registry editor. Here is a link to a free editor PHM Registry Editor.
Here are the locations and the values that I set:
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Cac heSize=0x1FA0(8192)
HKEY_LOCAL_MACHINE\System\StorageManager\FATFS\Ena bleCache=0x1(1)
HKEY_LOCAL_MACHINE\System\StorageManager\Filters\f sreplxfilt\ReplStoreCacheSize=0x1FA0(8192)
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ MSFlash\FATFS\Filters\DataCacheSize=0x1FA0(8192)
HKEY_LOCAL_MACHINE\System\StorageManager\Profiles\ MSFlash\FATFS\Flags=0x28(40)
CLEARTYPE
One more hack from the guys here at hofo:
Originally Posted by dazz
Matt, you can turn ClearType on by doing a quick little regedit. Here is what is was for WM2003, hopefully it is the same for WM5:
[HKEY_LOCAL_MACHINE\System\GDI\ClearTypeSettings]
"OffOnRotation"=1
Change "OffOnRotation" to equal 0
AUTO INSTALL CAB FILE AND CUSTOM AUTO CONFIG
So new ways to customize the KJAM
So further to my discovery yesterday I have dug around and discovered the following
The AutoRun.exe contained within the \ExtendedRom\of your KJAM is hard coded, which means that if you place any file (.CAB) which you would want it to install and rename it..
Original file = I_want_this_file_to_auto_install.cab
To…
New File Name = Default_ I_want_this_file_to_auto_install.cab
By adding “Default_” to the beginning of the name it is also AUTO INSTALLED
BUT and it’s a BIG BUT only WM5.0 APPS will be installed as installing earlier apps makes the PDA ask a question “this was designed for an er..” and as you cant press any buttons it don’t get installed…
SO WHAT CAN WE DO…
Well did you know that if you go to http://forum.xda-developers.com/front_page.php and register and then go search for the JASJAR Extended Rom
You might well find a link in this thread… http://forum.xda-developers.com/viewtopic.php?t=28629&s...ighlight=extendedrom
Now if you were to download it and look inside you would also find a different Autorun.exe which reads a config.txt file
Verey interesting you might think..
“What if I wanted to make my own Custom Auto config ?” is a question which you might well ask..
Well whilst we can not condone such things, in the interest of helping you understand how this different Autorun.exe functions, I’ll take you through an example, please do understand that it is against all the policies of this Board to entice you do download software from the internet and to install this on your own device.
If you however feel compelled to do this for yourself, please be aware that neither myself, PPCD or any of our sponsors can be held responsible in any way for any losses or damages incurred by you or any other persons resulting from information contained here in.
Lesson 1) The Autorun.exe
This file is an executable..but only on a PDA running wm5. It reads a file which is present in the \Extended_Rom\ called config.txt. This app understands certain commands such as
LOCK:Enabled ………………..which locks the Screen and Keys
LOCK: Disabled……………….. which Unlocks the Screen and Keys
CPY1:\Target\Target File.ext…..Which tells it that this file in this folder should be copied
CPY2:\Destination\Destination_File.ext…Which tells it where to copy the file to and what it should be called
CAB: \ Target \ Target_File_to_install.CAB…Tells it to install a cab file
RST: Reset………….Guess what ..Yep resets the PDA
All pretty basic stuff
Lesson 2) So what could I do …if I wanted to..
Little Johnny wants to create a Custom installation routine for his new PDA and did NOT want that nasty default autorun to install the antivirus files which would slooooooooow his new pet down.
a) He would like some CAB Files installed
b) Whilst he would like other to be simply copied so that he can install them later (He knows that if he just allows them to auto install instead that they will be put in to main memory, and he would like to have them on his SD Card instead)
c) He would like to put some Custome Ring Tones in to the \Windows\Ringers directory
d) He would like to put some wav files in to the \Windows directory so that he could use them for ALARMS and NOTIFICATIONS.
1) He creates a file in note pad called config.txt
2) Has he would not like the Device to be disturbed he first enters
a. LOCK:Enabled
3) The Files he would like to AUTO INSTALL are :-
a. Default_CAB-shortcut-CDL-08Sep05.CAB
b. Default_cdl_wwe_version.cab
c. Default_ie_view.sa.cab
4) Then he would have to enter :-
a. CAB: \Extended_ROM\Default_CAB-shortcut-CDL-08Sep05.CAB
b. CAB: \Extended_ROM\Default_cdl_wwe_version.cab
c. CAB: \Extended_ROM\Default_ie_view.sa.cab
5) Now he wants to have some files simply copied, he desides on coping them to \My Documents\Business\ so that he can find them quickly and install them later. The files he wants to copy are:
a. Default_tcmdpocketarm.CAB (Total Commander Freeware found at http://www.ghisler.com/pocketpc.htm)
b. Default_Backgammon_PPC_IMAM001.CAB
c. Default_SkypeForPocketPCnonxScale.CAB
d. Default_SmartDialing_enable_0915_signed.CAB
6) Thus he enters :-
a. CPY1:\Extended_ROM\Default_tcmdpocketarm.CAB
b. CPY2:\My Documents\Business\Default_tcmdpocketarm.CAB
c. CPY1:\Extended_ROM\Default_Backgammon_PPC_IMAM001.CAB
d. CPY2:\My Documents\Business\Default_Backgammon_PPC_IMAM001.CAB
e. CPY1:\Extended_ROM\Default_SkypeForPocketPCnonxScale.CAB
f. CPY2:\My Documents\Business\Default_SkypeForPocketPCnonxScale.CAB
g. CPY1:\Extended_ROM\Default_SmartDialing_enable_0915_signed.CAB
h. CPY2:\My Documents\Business\Default_SmartDialing_enable_0915_signed.CAB
7) No he wants to get those custom sounds and ringers installed, these being
a. MyNeatSMSMsg.WAV………...A cool neat SMS Sound ! (Can only be wav)
b. MyNeatNewAlarmSound.WAV..A cool neat ALARM Sound ! (Can only be wav)
c. MyReallyCoolRinger.WAV…….A cool neat RINGER Sound ! (Could be .MP3, .MID or .wav)
8) So he enters:-
a. CPY1:\Extended_ROM\MyNeatSMSMsg.WAV
b. CPY2:\Windows\ MyNeatSMSMsg.WAV
c. CPY1:\Extended_ROM\MyNeatNewAlarmSound.WAV
d. CPY2:\Windows\ MyNeatNewAlarmSound.WAV
e. CPY1:\Extended_ROM\MyReallyCoolRinger.WAV
f. CPY2:\Windows\Rings\ MyReallyCoolRinger.WAV
9) Now Johnny is nearly finish so he completes the new config.txt with the following lines
a. LOCK: Disabled
b. RST: Reset
10) His now finished config.txt looks like this.
CAB: \Extended_ROM\Default_CAB-shortcut-CDL-08Sep05.CAB
CAB: \Extended_ROM\Default_cdl_wwe_version.cab
CAB: \Extended_ROM\Default_ie_view.sa.cab
CPY1:\Extended_ROM\Default_tcmdpocketarm.CAB
CPY2:\My Documents\Business\Default_tcmdpocketarm.CAB
CPY1:\Extended_ROM\Default_Backgammon_PPC_IMAM001.CAB
CPY2:\My Documents\Business\Default_Backgammon_PPC_IMAM001.CAB
CPY1:\Extended_ROM\Default_SkypeForPocketPCnonxScale.CAB
CPY2:\My Documents\Business\Default_SkypeForPocketPCnonxScale.CAB
CPY1:\Extended_ROM\Default_SmartDialing_enable_0915_signed.CAB
CPY2:\My Documents\Business\Default_SmartDialing_enable_0915_signed.CAB
CPY1:\Extended_ROM\MyNeatSMSMsg.WAV
CPY2:\Windows\ MyNeatSMSMsg.WAV
CPY1:\Extended_ROM\MyNeatNewAlarmSound.WAV
CPY2:\Windows\ MyNeatNewAlarmSound.WAV
CPY1:\Extended_ROM\MyReallyCoolRinger.WAV
CPY2:\Windows\Rings\ MyReallyCoolRinger.WAV
LOCK: Disabled
RST: Reset
Lesson 3) So where did he get the files and mor important what did he do with them.
To complete your education I would like to explain exactly how little Johnny got a hold of the files (Default_) mention in lesson 2) above.
1) He downloaded Total commander for PPC (http://www.ghisler.com/pocketpc.htm) and installed it (Windows Installer Version) on both his PC and PDA after the install he made sure that he ActiveSynced and Ran the file on the PDA
2) He again downloaded the CAB version from the same site
3) He placed this in a Directory of his SD card called \GoAuto and created another folder called \AutoBackup, both in the root of the SD CARD
4) On the PDA he typed in the ENTER BOX at the top of the Total Commander screen exactly the Word “\Exteneded_Rom” making sure that the spelling and capitalization were correct
5) He was then presented with a display showing the contents of this otherwise hidden folder.
6) He quickly selected from the TC menu the word “Show”…this brought up a Dialogue with many options. He selected “Single window mode”, this brought up another dialog, here he selected “Virtual 2 window mode”
7) Now by selecting the “>” he had to file display windows
8) He Depressed the “>” which showed him the root of his device, here he selected “Storage card”, and then “\AutoBackup”, pressing the “<” now brought him back to the “hidden folder”
9) He he dragged his stylus across the screen, thus selecting all the files and after pressing the 2 icon at the bottom of the screen , he was asked where he would like to copy or move the files.
10) He made sure that the Diloge showed “\Storage Card\AutoBackup\*.*” and after depressing Move. All those nasty files were moved on to his SD card.
11) He reconnected his PDA to his PC, and via ActiveSync and “Explore ”, he was able to select his storage card.
12) He copied the contents of “Storage_Card\AutoBackup\” to his PC for safe keeping.
13) As this copy now contained the some files which he wanted , he copied the files in question on to his SD Card, placing them in the “\GoAuto” Folder.
14) After coping the remain files (wav, mid,…) which he wanted to auto install, he created a “Config.Txt’ as described in Lesson 2), which he also placed in to the folder.
15) KNOWING that the original “Autorun.exe” would not install the files as per this config.txt, he proceded to go search on xda-developers for the rom image, he then extracted the other ‘Autorun.exe” and placed this also in the folder \GoAuto
16) Back on his PDA he started “TC” again, and reselected the “\Extended_Rom\” and via the “Virtual 2 window mode” also the “\Storage Card\GoAuto\”
17) He then procedded to select all the files in the “\GoAuto” folder and copied them all across to the “\Extended_Rom\” folder.
18) He was now able to HARD RESET his device and watched as the PDA installed and copied the files as requested.
CAPS/ICON LOCK INDICATOR
Looking inside my \Windows\Startup folder on my Wizard, I found a shortcut to an application called CapNotify.exe. Upon inspecting the file in a hex editor, I found a registry key called "EnableIndicator" which was not found in the registry.
After creating the registry entry called EnableIndicator at \HKCU\ControlPanel\Keybd and assigning the DWORD value of 1 to it , then soft-resetting my device, an indicator appeared next to the keyboard icon on the bottom of the screen! Tapping the Shift key showed a "C" while tapping the Dot key showed a dot! Very cool!
RANDOM TIPS
The Extended ROM is not locked, but hidden, and can be accessed and customized using Ghisler's Total Commander 2.0 utility for Pocket PC. (mixmaven and nobackup)
An electronic version (PDF) of the manual and the quick-start guide can be found here and here, respectively. Page 11 of the manual contains some good information. (mixmaven, local links provided)
Hold down the Comm button to toggle vibrate/sound mode. (farzonalmaneih).
Bootloader mode can be accessed by holding the Camera and Voice buttons, and tapping the soft reset hole. (mashie)
Using tip #1, the integrated antivirus software can be removed for reported better performance. (mmg)
Download the latest beta of ActiveSync 4.1, build 4807 here, as it has provided a number of bug fixes from the public release of ActiveSync 4.0. (mixmaven, local link provided)
Put the Wizard in standby (phone/data will still work if radio is on) by pressing the Power button. Turn off the Wizard completely (you will not be able to receive calls) by holding down the Power button for 5 seconds. With persistent storage, this new feature will ultimately save the battery power better than any previous Windows Mobile device. (mixmaven)
WM5FixSite.com provides a user-submitted database of current applications and their compatibility with Windows Mobile 5.0. (prodigalfish)
Use OCP's WinCE CAB Manager to open pre-XML-based CAB files. Digital signature authentication will be broken if the CAB files are modified, however. (beyondthetech)
The digital signature security that's enabled by default can be disabled by using the digitally-signed CAB file from Sprint PPC-6700's Extended ROM. Add a "Default_" prefix to the name and have it run first in the Wizard's Extended ROM, so that any CAB, CPF, or EXE file, signed or not, can be used after that CAB file has been installed. (beyondthetech)
Changing the value of "OffOnRotation" from 0 to 1 in registry location HKLM\System\GDI\ClearTypeSettings, followed by a soft-reset, will give the ClearType feature in landscape (keyboard open) mode. ClearType must be enabled in portrait mode first. (mixmaven)
Double-clicking on the Shift key will toggle Caps Lock mode. Double-clicking on the Dot key will toggle Symbols mode. (sparkomatic)
Change the Comm button to OK/Close in the Buttons applet under Settings, to make it easier than tapping the OK button when in portrait (keyboard closed) mode. (sparkomatic)
Left-handed action of the Wizard can open the keyboard slightly enough to hit the OK and Windows buttons without it going into landscape mode. (nobackup)
Tapping the End key will minimize the current application and return to the Today screen (if you have a valid SIM card installed). (nobackup)
Use Orb on your desktop to stream multimedia files to the Wizard via its fast Wi-Fi or EDGE capabilities. (mmg)
BoxWave's VersaCharger, accompanied with a mini-USB cable is a single, perfect solution to charge the Wizard in a vehicle or at a wall outlet. (beyondthetech)
Create an Internet Favorites shortcut to http://mobile.google.com/loc_search.html and get a PDA-friendly Google interface to search for business listings. (beyondthetech)
Create an Internet shortcut to your local Loews Cineplex Odeon theater. Surf their main site (www.enjoytheshow.com), punch in your zip code on the 'Theatre Search' box on the left, click on your theater, grab the 5-letter code for your theater in the URL, and get a 'very light output' version of the showtimes using their 'Print Showtimes' shortcut. (beyondthetech)
NEW! Create an Internet shortcut to any movie theatre that Fandango supports. Using the same method in tip #19, get the 5-letter code for the theater of your choice, and make a shortcut to http://www.fandango.com/TheaterPage.aspx?pf=1&tid=XXXXX and replace XXXXX with that 5-letter code. This will be a PDA/printer-friendly output of today's movie showtimes. (beyondthetech)
Microsoft Voice Command 1.5 can be installed in replacement of Cyberon's Voice Speed Dial software. Further cleanup to remove Voice Speed Dial in the registry is also available.(beyondthetech and beyondthetech)
Perform a full wipe of the device by going to Settings > System > Clear Storage. It is disputed that it may not be a full equivalent to a hard reset. (Dave Evans)
A hard reset can easily be performed by holding down the Comm and Voice buttons, and tapping the soft reset hole. While still holding down the two top buttons, the screen will go black and you will be prompted to hit Send to restore factory default settings. (nickp)
Clubimate.com offers a hosted Exchange Server solution for email for free to all i-mate device owners. Additional Exchange Server features are at an additional cost. (beyondthetech)
The 24-hour clock mode and English-UK regional settings customizations are performed by one of the CAB files in the Extended ROM. Delete the unnecessary CAB files, or perform a soft-reset before customizations are performed, or simply go to Settings > Regional Settings and change it back afterwards. Make sure you use the lowercase 'h' time format for 12-hour mode. (beyondthetech, nickp and nickp)
Change the Network Selection to Manual to customize preferable cellular towers and maintain a better signal. (prodigalfish)
The built-in Wi-Fi radio on the Wizard allegedly does not transceive on all channels. (kid1972)
The installation of Skype and SmartDialing is reported to make the device run slower, and the Network Setting of Automatic can make the device more busy in low-signal conditions. (nobackup)
There is no cut/copy & paste keyboard shortcut on the Wizard's hardware keyboard. (cdtv)
The device can play ringtones in MP3 and WMA format. (boxer82003)
Easily toggle the Wi-Fi radio on and off in the Comm Manager to resolve any DHCP/IP issues. (bubmc)
Relocate the Temporary Internet Files, History, and Cookies locations to the Storage Card to save precious main storage memory. It is reported that there may be a slight performance impact with this configuration. (mixmaven and dherrero)
Spb Pocket Plus 3.0.1 should work better on the Wizard if the Safe Mode feature is unchecked, but now Spb Pocket Plus 3.0.4 apparently resolves the Safe Mode issue. (mixmaven and mixmaven)
Use 3M First Aid Tape or eGrips to keep a better hold or grip on the Wizard. (hitch and beyondthetech)
Prevent any connected Bluetooth device from timing out (sleeping) by changing the "Sleep" value from 1 to 0 in registry location HKCU\ControlPanel\Phone. (mixmaven)
Power the Wizard in an emergency using the Arkon Battery Extender with USB Port (CA062) and 4 AA-size batteries (NiMH, NiCd, or alkaline). (hitch)
A prestine copy of the K-JAM's initial shipping version of the Extended ROM can be found on XDA-Developers' FTP site. (beyondthetech)
Updating the desktop to Windows XP Service Pack 2 and all the hotfixes can resolve many ActiveSync connectivity issues with the Wizard. (garyhartaz)
A detailed method on resolving 'Blue Screen of Death' issues on PC's trying to ActiveSync can be seen here. (swjg)
Steps to reverting to ActiveSync 4.0 after an ActiveSync 4.1 installation is detailed here. Preserving Outlook settings during this process is also detailed here. (lcavada and swjg and aadadams)
Change the User Agent information to trick websites into receiving pages normally designed for desktop with these instructions here. (aadadams)
Google "PDA version" can be accessed through http://www.google.com/pda and http://www.google.com/xhtml. (mmg and mmg)
Keep the GPRS connection active at all times possible by changing value "AlwaysOn" from 0 to 1 in registry location HKLM\Comm\ConnMgr\Providers\{7C4B7A3...}\Connections\GPRS...\. (aadadams)
Back up your Cyberon Voice Tag database by copying the CommandModel1.bin file in your \Windows folder to your PC or Storage Card for safekeeping. (simx)
The current version of OmegaOne Journal Bar hangs in its Links section. Disable the section until a newer version is released. (mixmaven)
Changing the timeout value from 1 minute to 2 minutes in the Power settings has been reported to resolve some alarm notification issues. (zedeff)
Registry location HKCU\Software\Microsoft\Internet Explorer\Main\FavoritesEntries\ contains the default Internet Favorites that can't be removed from within Internet Explorer Mobile. Delete them manually in the registry instead. (mixmaven)
Tweaks2k2.NET has incorporated many registry hacks (including some listed previously here) and performing certain tweaks is reported to have better performance results, especially when converting the registry from hive to file format. (bengalboy)
To date, SunnySoft Backup Manager is the only reported working file and registry backup utility that works on Windows Mobile 5.0. Version 3.6 has just been released.(beyondthetech)
Last, but not least, HowardForums has established their own user-supported Wiki to incorporate all the inner workings of Windows Mobile-based Pocket PC devices. (howardforums)
DISABLE MESSAGE SENT NOTIFICATION
for those who hates the "Message Sent" notification after sending an SMS, this is the steps to remove the bubble notification...this is the STEP by STEP method to do it in case some of you guys dont get it right...
1. First, you will need to download a Registry Editor to help you do it...
a good one will be the freeware PHM Registry Editor
or for those who got the Resco Explorer, you can use the Registry Editor that comes with it...
2. using the Registry Editor, navigate to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Inbox
3. Next, click on Inbox (make sure the Inbox is highlighted) and select Edit, New Key
4. Name the New Key as "Settings"
5. Click on "Settings" (make sure the Settings is highlighted) and select Edit, New String Value
6. On "Value name:", key in SMSNoSentMsg and in "Value data", key in 1
7. Soft reset your device and test it with one SMS, and you will notice that the SMS Sent bubble is being disabled
HKLM\Software\Microsoft\Inbox\Svc\SMS
Message Sent
You can change the message that is shown in the Sent Message Notification.
RELOCATE PIE DATA STORAGE
This hack will increase your available ROM memory and people have reported storage gains of over 9 mb. You will need to have a storage card with some free memory installed to utilize this hack. First open up internet explorer and navigate Menu>Tools>Options>Memory and press the delete files button to clear the cache then delete the cache and the history. Then open up file explorer from the programs folder in the start menu. Navigate to the Storage Card and make sure that you are in the base directory of the card. Then create an ie folder and within that folder create a cache folder, history, and Open up a registry entry program such as Resco Registry that comes with Resco Explorer 2005. Navigate to "HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Shell Folders\Cache". You can change the default value "\Windows\Profiles\Guest\Temporary Internet Files" to "\Storage_Card\ie\cache". Change the other values in the Shell Folders section of the registry to the folders you created and then soft reset. Be warned that you will create errors in ie if you do not have a storage card inserted with those directories on it while you are surfing from now on.
REMAP SOFTKEYS
Open up a registry entry program such as Resco Registry that comes with Resco Explorer 2005. Navigate to "HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 2" By changing the default key you can change the text of the softkey and by changing Open key you can change the program that it opens. The right key cannot be changed by this method. "
Now the Second Key
you just add a new key
"HKEY_CURRENT_USER\Software\Microsoft\Today\Keys\11 3"
and the default is the key
and and a new string value "Open" with the path and presto!!!!
ANY FOLDER RING TONES
1. Run Total commander
2. go to \\ (at the very top)
3. open \\\registry\HKCU\ControlPanel\SoundCategories\Ring \Directory
4. Change the content of this file from
\Windows\Rings to \Storage Card\Rings\
Note: \Storage Card\Rings\ is the directory I created on my storage Card to store my personal Ring Tones.
To select a new ringtone, Start->Settings->Phone.
The Ring tone are now selected from \Storage Card\Rings\
and Best of all, your ring tones doesnt take up any valuable RAM Space.
EDGE ICON REG HACK
After reading Vishny' commment on one of the threads in xda-dev, per his suggestion, I added the key EnableDifferGprsEdgeIcon dword value in HKLM\Drivers\BuilIn\RIL.
STOP ACTIVESYNC FROM TURNING ON AND TURN OFF ERROR REPORTING
Now, you need to stop Activesync from periodically starting on it's own. To do so open Activesync on your WM5 device and tap on Menu>Add Server Source. Add any info to create a fake server sync. After that is complete go to Menu>Schedule and change the two dropdowns to "Manual" and tap "ok" at the top right. You can now go to Menu>Options and delete the Exchange Server setting you just added. Now Activesync will not start when you cradle your device.
Error Reporting is real drain on the battery and on performance. It is simple to disable, just go to Start>Settings>System(tab) and tap the Error Reporting icon. Change the setting to "Disable error reporting".
CHANGE SPLASH SCREEN
1) Get the aWizard tool from
http://forum.xda-developers.com/viewtopic.php?t=37386&postdays=0&postorder=asc&start=0
2) Enable RAPI (otherwise next command will exit with a message saying itsutils.dll cannot be replaced, or smth like that)
You do that searching the "EnableRAPI.cab" on the forum and follow the instructions (you copy it to the phone and then install it on the phone)
For example here:
http://forum.xda-developers.com/viewtopic.php?p=202299
3) MAKE SURE the phone is connected via ActiveSync
Get a DOS shell : start -> run -> "cmd"
move to the directory that contains the tools ("\lib")
(the next 3 steps are just to test the pdocread.exe and logoconvert.exe - i think)
otherwise skip to step 7
4) pdocread.exe -n 1 0x002d0000 153630 splash.bin
5) Use the logoconverter.exe -> see attachement
I got the cpp file, changed the resolution to 240x320 and recompiled it
logoconvert bin2bmp splash.bin splash.bmp
6) Get a image editor (I use "gimp") and see the splash.bmp -> it should be the image that it's displayed at boot time.
You can modify it as you like.
7) Get a image 240x320 with 24 bits depth bmp (I think) (it should be around 250K)
it can be the one obtained at steps 4,5 and 6
"logoconvert bmp2bin splash.bmp splash.bin"
9) "pdocwrite.exe -n 1 splash.bin 0x002d0000"
That's about it.
NOTE: I'm just an user of the above programs, I don't know exactly what they are supposed to do and what they really do. Anyway, I managed to changed the boot image and I want to thank all of the people that by their tools made it possible.
This cab file will enable the caps/icon lock indicator on all roms and the edge icon indicator on newer roms.
previous messages show how to do this exact thing through reg editing. this is for those who don't want to do it that way.
This cab will prevent cab files from being automatically deleted after they're run.
This unlocks the extended rom in wizard versions that have it locked
This one is very recent and to quote arnonrgo from a different thread.
It is basically a cab that holds a few registry changes
one to stop menu animation
one for (2 keys) to enable G (wireless. in versions that dont have it enabled)
one (3 keys) to set a (small 1K) cache
and one to enbale the keyboard indicator (the same as is done in a previously posted cab file)
I renamed the cab to make it easier to see what it does.
If you want to do the G hack through the registry instead of the cab. Wagnerb supplied the keys
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS: dot11SupportedRateMask=1
HKEY_LOCAL_MACHINE\COMM\TNETWLN1\PARMS: dot11SupportedRateMaskG=8
All values are decimal
guttrhead said:
I vote for this thread to get stickied. I think more people check the forums than the wiki, me included.
Click to expand...
Click to collapse
chicken and egg...
Why would people check the wiki if the information can't be found there?
And why would people add to the wiki if everybody just goes to the forum anyway?
Anyway, carry on...
Seeing as you're Dutch you might want to take a look here. I've gathered quite a few amongst other useful info.
Guys, don't get excited, this is just a teeny tiny app for a special request:
http://forum.xda-developers.com/viewtopic.php?t=50460&start=0&postdays=0&postorder=asc&highlight=
I'm basically not releasing anything for a while whilst I work on my new website, which is taking ages
However, this app is just used to launch an app in the same folder, with the filename
VJTarget.exe
or a shortcut called VJTarget.lnk.
This is very specific in use. You don't need it, I'm sure.
But if you have an app that can launch an .exe, but won't launch a shortcut with a command line, then this might be for you (I know some button redefiners and Today launchers might get use out of this)
So, basically, if you want to run VJDialer with a command line in TomTom:
1. Create a shortcut to VJDialer and set it up as you normally would.
2. Check the shortcut to ensure it works.
3. Copy it to your target folder.
4. Copy VJBrisk.exe to the same target folder.
5. Rename the shortcut you made in Step 1 to VJTarget.lnk.
6. Running VJBrisk will now launch VJTarget with its command line etc.
So, setup TomTom to run VJBrisk, and VJBrisk will then launch a file called VJTarget.exe or VJTarget.lnk in the same folder.
Like I said, very specific, but a good experiment for me with some nice string classes
On my (old) website.
V
Thanx!
I will rewrite my question here, because it's + appropriated:
i will try NOW your app.... only a question:
VJbrisk.exe launch only one vjtarget.lnk or just rename it (exe) with the same name of the link to have more than 1 phone link?
(es Vjbrisk1.exe call Vjbrisk1.lnk, Vjbrisk2.exe call VJbrisk2.lnk etc ?
sorry 4 my english
:::EDIT:::::
i HAVE AN IDEA!
If a Vjbrisk.exe read from a text file vjtarget.txt :
links = 2
link1: vjdial.exe 123456789;
link2: vjdial.exe 987654321;
then by renaming as Vjbrisk1.exe or vjbrisk2.exe the program execute the link into the txt?
the counter is for vjbrisc[X].exe, from x=1 to x=[links].....
or the exe filename can be compared with a string written into the txt:
"VBrisk1.exe" = vjdial.exe 123456789
"VBrisk2.exe" = vjdial.exe 123456789
I don't know is it's possible.... however good work for all others apps that you've made !
VJBrisk will launch VJTarget.exe or VJTarget.lnk.
I could make it so that renaming VJBrisk Eg VJBrisk2.exe will launch VJTarget2.exe.
But for your TomTom setup, I suggest you just use a different folder and a different copy of VJBrisk for each app you need to run.
The text file option is possible, but may be more complicated then just renaming the .exe as I describe above.
V
ok thnx 1000
accidental presses solved
thanks again to kokotas and vijay555.
kokotas for his ROM that allows me to replace \windows\biotouch.exe without difficulty
vijay555 for his VJBrisk that allows a "new biotouch.exe" to launch a shortcut to s2u2.exe
this means slide2unlock2 will remain locked, even if there are accidental presses/brushes(due to hardware design) while my elf is in my pocket.
Hi, Vijay.
Is there any chance that you could modify this app so that it would pass the command-line parameter it was launched with on to the shortcut?
Here's what i'm trying to acchieve:
I'm using a QR Code reader called quickmark that can read a URL from the barcode, and open it in a web browser. It can ce switched to use Opera instead of IE, but it attempts to launch the executable called OperaLaunch.exe from /Windows, while my Opera9 beta exec is on the storage card, and it's called Opera9.exe
I tried to create a shortcut to it, rename it to VJTarget.lnk, and place it in /Windows along with VJBrisk renamed to "OperaLaunch.exe". When i tried to access a web page from quickmark, opera was launched, but it opened its home page, as if it didn't receive the command line parameter. Manualy running the link with URL as command line parameter worked fine, so it seems that VJBrisk doesn't pass the parameter...
[new version!] Command line support
mr_deimos - that's a really good idea. I don't know why I had never supported it before.
Can you please try this new version.
It's been years since I've made a cab, so for now, just a new .exe.
Let me know if it works ok for you.
VJBrisk 0.2 with command line support
V
Whoa, i didn't notice this version before. Thanks for making the update and sorry for the late reply.
However unfortunately it still doesn't seem to pass the command line parameters. Right now i don't have the opera9 anymore, but i tested it with netfront:
I have the vjbrisk.exe renamed to OperaLaunch.exe and vjtarget.lnk (pointing to my NetFront executable on storage card) in my /windows dir.
If i run:
Code:
\windows\vjtarget.lnk http://www.xda-developers.com
Netfront opens up, and loads the xda-dev website.
But ruunning:
Code:
\windows\operalaunch.lnk http://www.xda-developers.com
NetFronf fires up, but loads its homepage instead of this website Of course the same happens with QuickMark - it just launches NF, without loading the proper page.
vijay555 said:
mr_deimos - that's a really good idea. I don't know why I had never supported it before.
Can you please try this new version.
It's been years since I've made a cab, so for now, just a new .exe.
Let me know if it works ok for you.
VJBrisk 0.2 with command line support
V
Click to expand...
Click to collapse
it works fine, but can you make an option so that it is possible to use it multiple times in one directory =?
ex:
manila2d use on homescreen hardcoded:
-> clock.exe for timer+
-> calendar.exe for outlook calendar.
# # # #
now i want to use:
-> clock.exe for spb time
-> calendar.exe for thumbcal
so i overwrite calendar.exe + clock.exe with your tool(copy vjbrick.exe to calendar.exe + clock.exe) + make the link to vjtarget....
so how can handle your tool this for different targets ?
my idea would be that there is
1.) vjbrick.exe looks to its own exe-name and searching for a file with extension: ".vjb" . there the call is inside to the correct exefile + paramter
so for example:
1.) copy vjbrick.exe to calendar.exe + copy to windows(overwrite the orig file)
2.) generate a file calendar.vjb + inside there is: "programm files\thumbcal\thumbal.exe -day" + copy the file to \windows
manila2d->
THEREFORE: a lot of guys which are searching therefore a solution !!!!!!!!!!!
cu camel
Deprecated
Guys, VJBrisk has been updated and relaunched here
http://forum.xda-developers.com/showthread.php?p=3252253#post3252253
V
Hey all, seeing as I couldnt find this topic here already, I thought that I would share with you all how to change the system font on our beloved Wizard. It is quite simple really but it does require a few things:
1-A Wizard/MDA/O2 XDA Mini S/Cingular 8125
2-A Truetype style font(they end with file extension .ttf)
3-5 minutes of time
Alright now here is how to do it!
1)-Connect your device to your computer, and let Activesync do it's thing(until the green double-arrow icon in your tray stops spinning).
2)-Click on [Explore], then on "Windows Mobile Based Device", then on "Windows". If you cannot see the "Windows" folder, goto the top of the window and click [Tools] then [Folder Options] then the [View] tab, then scroll down a bit until you find a checkbox that says-"Show Hidden Files and Folders" and make sure that it is checked(or dotted if the case may be).
3)-Now, leave that window open, and go and grab you font. Right click on the font file itself and scroll down to [Rename]. In the field, type "Tahoma" then [OK]. Now, copy that file that you just renamed, and paste it to another directory(such as the desktop so that it is easy to get back to), and rename it to-"TahomaBD" and click [OK].
4)-Now click and drag, or copy and paste those 2 files into the "Windows" folder that you have open from earlier, tell it [Yes] to overwrite the existing files if needed.
5)-Now, soft-reset your device and voila! You have a nice shiny new system font! Wonderful! Now, you may be wondering how to get your old one back, and it is indeed very simple.
6)-To restore the Tahoma font, either download a copy of it from the internet(note that it is NOTE public domain, and it is against the rules to post it here at XDA-Devs), or navigate to your computers "Font" folder and simply copy it to your desktop, and rename and copy it as above, soft-reset again and BAM, back to OEM status you go! You can also just Hard-reset if you get desperate.
Well, thats it! Quite simple eh? Took me about 30 minutes or so to figure it out, but here are some screens to prove that it works!
ROM=TNT 6.1 build 20273
I am currently using a font based of the one used in the Star Trek:The Next Generation TV series, but any Truetype font should work!
I hope someone finds this useful!-ashasaur
Thnaks you
Re:
I Can't copy Tahoma & TahomaBD into my device cause i can't delete the old ones cause they are read-only or something like that can u help me?
try to use Resco Explorer, it works
Change font on Ipaq 314
I have a Ipaq 314 and i don't know how change and resize font in it
Someone tell me how do it?
nice mate ....
and it's work ! thanks for your effort
SE Panel supports weather.
Unfortunately some city is forgotten.
SOLUTION:
1) You need to know you City Code for your city:
- go to ULR: http://www.accuweather.com/us-city-list.asp?partner=netweather
- search your city NAME in the right input field
- check the URL reached after pressed the search button (example: last part of my URL is "loccode=EUR|IT|IT007|ROME")
Now you have found your City Code (in my example it is "IT007").
2) Browse on your X1: "\Programs\Panels\SonyEricssonPanel" to check "CITY.dll".
3) Copy the DLL on your PC and open it with a Resource Explorer/Editor like "XN Resource Editor"
4) There is just one resource: a CSV (comma text) file called "101" in "Japanese" language.
5) Export the resource and save it in an CSV file where you want on your PC
6) Open the CSV file with Notepad and edit it adding your City Cod. Please see other rows to use same format:
Example of one row: "1886,Roma,Italia,3600,EUR|IT|IT007|ROMA"
7) Save the CSV file
8) Delete existent resource "101 - Japanese" from the Resource Editor
9) Add a new resource to DLL (use "Import User Resource" if you are usint "XN Resource Editor") and browse to your new modified CSV file.
10) Change resource's language to "Japanese" (as you have found previous one) and change its name to "101" (it can be different, so you need to recreate the same previous internal resource's structure)
11) Save it!
12) Make a backup of original X1 "CITY.dll" and replace it with your modified one
13) Soft Reset!
That's it!
Thank you, this sounds fantastic.
Just tried it out but it doesn't seem to work.
When I copy the new CITY.dll into the panel folder, there are no cities to chose from anymore in the panel's options.
The whole list is empty.
I made exactly what you've written so I can't find the problem
The same for me, not even one entry is visible in list
Not Working....
I tried to add Cape Town, have no idea why SE left this one out....
Try REPLACING an existing city in the file instead of just adding a new one and make sure the length of the string you insert is the same ( ->Filesize before and after should be the same). Can't guarantee that it'll work, it's just a suggestion for you guys
My ****in' PC just doesn't let me save any files with XN Resource Editor. It always sais System Error 19. 'read only'
de Wolfe said:
My ****in' PC just doesn't let me save any files with XN Resource Editor. It always sais System Error 19. 'read only'
Click to expand...
Click to collapse
So, now I managed it to save my new CITY.dll. When I replace the original one with the modified one I also cannot choose between any cities anymore... there is just nothing in the list anymore...
SE "Lost" City's
Hi Firefall
I have done both, new city and replace, both have the same result.
When i want to look up a city, there is none in the list.
SE "Lost" City's
I have mannaged to do this, and it works
You will need to have the following tools befor you start.
a. Total commander for WM, this will help to copy "CITY.DLL" to you mem. card - NB. The PANEL must not be in use, else you will not be able to copy and re-name the file
b. Hex editor - your choice.
c. Multiple file Signer - to digitally re-sign the finished dll.
d. CITY.dll with digital signature removed, i have done this for you, see attached file.
Here is a step by step How To.
1. Do "emandt's 1st step - get ino from : http://www.accuweather.com/us-city-l...ner=netweather
2. Open the CITY.dll in you editor - DO NOT EDIT IN ASCI, USE HEX - and take note of the format where the CITY information is stored - DO NOT ADD TO THE FILE -
3. Find a "city" that you can ammend, note the formatting and ammend the line with your required data. - DO NOT EDIT IN ASCI - make sure that the "Space" between the Chrs. are 0x00 and NOT 0x20
4. If there is additional charicters left after, DO NOT DELETE THEM, replace them with 0x00 not "space - 0x20" DO NOT ADD TO THE FILE .
5. Save the file and "Sign" it with Multiple file Signer - see .txt file if the "Sign" was done.
6. On your phone - "\Programs\Panels\SonyEricssonPanel\" re-name "CITY.dll" to "CITY.dll.bak" - your safety net, backup of original file
7. Copy signed file to "\Programs\Panels\SonyEricssonPanel\".
You may now find your "City" listed. - Take that SE for not listing my city!!!
I added "Cape Town" to my list and it works 100%
Worked for me too, and i'm no computer wizz!...
cheers,
To my greatest surprise,
after 1 month my X1 came back to successful weather update.... By itself.
Have no idea how.
It worked! That's awesome, this has been annoying me for 6 months. Pretty shoddy work from SE though, the dll file seems barely half-finished.
Good work, thanks.
Zodiac69 said:
I have mannaged to do this, and it works
You will need to have the following tools befor you start.
a. Hex editor - your choice.
b.Multiple file Signer - to digitally re-sign the finished dll.
c. CITY.dll with digital signature removed, i have done this for you, see attached file.
Here is a step by step How To.
1. Do "emandt's 1st step - get ino from : http://www.accuweather.com/us-city-l...ner=netweather
2. Open the CITY.dll in you editor and take note of the format where the CITY information is stored - DO NOT ADD TO THE FILE -
3. Find a "city" that you can ammend, note the formatting and ammend the line with your required data. - DO NOT EDIT IN ASCI - make sure that the "Space" between the Chrs are 0x00 and NOT 0x20
4. If there is additional charicters left after, DO NOT DELETE THEM, replace them with 0x00 not "space - 0x20".
5. Save the file and "Sign" it with Multiple file Signer - see .txt file if the "Sign" was done.
6. On your phone - "\Programs\Panels\SonyEricssonPanel\" re-name "CITY.dll" to "CITY.dll.bak" - your safety net, backup of original file
7. Copy signed file to "\Programs\Panels\SonyEricssonPanel\".
You may now find your "City" listed. - Take that SE for not listing my city!!!
I added "Cape Town" to my list and it works 100%
Click to expand...
Click to collapse
Hi
I'm also from CT, could you post your CITY.dll, i've been unsuccessful in updating mine.
Thanks
Panel with Weather for missing cities
Hi, you can download a panel which lists the weather for cities not found on the SE Panel.
The link is
http://wap.sonyericsson.com/fun/mxh...category=FD_Panels&cc=US&dn=x1&filter=4&lc=en
Select the Spb Mobile Shell panel.
achilles2 said:
Hi, you can download a panel which lists the weather for cities not found on the SE Panel.
The link is
http://wap.sonyericsson.com/fun/mxh...category=FD_Panels&cc=US&dn=x1&filter=4&lc=en
Select the Spb Mobile Shell panel.
Click to expand...
Click to collapse
Can not be found.
My apologies, try -
http://www.sonyericsson.com/fun/wxh...;startIndex=15;phoneId=-1;contentItemId=34685
thx
Very easy, just added Cape Town
hey Zodiac69, thanks for the info. I'm still struggling with mine tho, the cities list just comes up empty after the change, so I'm clearly doing something wrong... Would you be able to upload your CITY.dll file though, seeing as I see you're from CPT too...
thanks
CITY.dll with Cape Town
To all the Cape Town X1's
Please find attached the DLL that has Cape Town included
Thanks Z, you saved me a whole lot of trouble
Okay, I searched for "change icons" and got two pages of threads on how to change program icons. Some provided great information; however, none addressed my need.
I'm interested in changing only FOLDER icons, and ONLY those in QuickMenu (see attached images). The folder icons are all the same except for two, the Games folder and the Office Mobile folder. They both have a small file inside the directory that's called "icon."
I would like to change any and all directories to whatever icon I choose, or design. Is this possible? If so, how?
Thanks,
Peter
Try PExplorer - it works magic!!!
http://www.heaventools.com/
Confused???
eenbox said:
Try PExplorer - it works magic!!!
http://www.heaventools.com/
Click to expand...
Click to collapse
Thanks for the quick reply. I had a look at that program, and the web site, and I'm completely confused. It looks like a program for my PC, and not my phone. Furthermore, I don't see anything mentioned on how to change an icon.
HELP!
ADDENDUM: Furthermore, as I said in my original post, I DO NOT want to change program icons, such as exe files or dll files. From what I can tell, PExplorer is desiged to modify the inner workings of exe and dll files, etc.
I want to change the icons for a directory (folder image). These are not programs or dlls.
Thanks,
Peter
Figured it out ...
I figured it out. It took a bit of thought, and some weird manipulation using Notepad, but now I can change any QuickMenu icon to almost whatever I want, as long as there's either an EXE or DLL file that contains the icon.
Cheers!
----------------------------------
Since I don't plan to return to this thread, and since there may be someone who wants to know what I did, here's my solution:
REMEMBER: This solution ONLY works if you want to change folder icons WITHIN the QuickMenu subset of folders. It does NOT work on program icons, or for any other icons for that matter (ONLY QUICKMENU FOLDERS).
01) Find an EXE or DLL file with the icon you want. If this file contains more than one icon, then you'll need to know the icon number within the program. This can be quite difficult to determine. However, for the purpose of this discussion, I'm assuming you want to use the MAIN icon, which is usually designated as icon "0" (zero) within the EXE or DLL file. We'll go with "0" for this discussion.
02) Your phone should already have at least one (probably two) folder icon files. The two in question are usually used for the Start Menu Games directory and for the Start Menu Office Mobile directory. Using Total Commander or any similar program (File Explorer will NOT work), make your way to either the Games or Office Mobile directory within the Windows\Start Menu. Whether it's the Games folder or the Office Mobile folder, you should find a shortcut file called icon. This is the file that determines how the folder will appear within the QuickMenu structure.
03) Copy this file to your PC. Anywhere will do as long as you remember where you put it. Make a second copy of it just in case you "ruin" your attempt to change the icon using these instructions. At least you can go back to what you had before.
04) Right click on this file and select Properties. In the General tab, uncheck the Read-only box. Click on Apply.
05) Open NotePad on your PC.
06) Within NotePad, click on File and then on Open. The Open dialogue box appears. At the bottom of this dialogue box are three horizontal white boxes. The second box has the title "Files of type." The default entry is "Text documents (*.txt). Click on the down arrow and change this to "All files." Now find the icon file you copied to your PC in (3) above and open it within NotePad.
07) You will see a line of instructions at the top of the file. These instructions tell your phone where to find the icon image. What we need to do, therefore, is change the instructions to another icon image.
08) Now let's assume that you have a Start Menu folder within QuickMenu called PDF files, and you would like that folder to have the Adobe Reader icon. To do this, change the line of instructions from what it currently reads to the following:
1#AdobeReaderLE.exe,-0
09) Make sure there's a carriage return after the final "0"
10) Re-save the file. The file name must not be changed. It must always remain as "icon."
11) Now copy this new file to the actual PDF directory within your phone's Start Menu. Soft reset your phone and the PDF folder will now have the Adobe icon.
DONE!
Here are some tips:
The above example assumes that the AdobeReaderLE.exe file is in your main Windows directory. If the EXE file you want to use is anywhere else, you need to direct the instructions appropriately. Here's an example for an EXE file contained on your Storage Card, and within the Program Files directory. Let's say you installed BsB Tweaks to the Storage Card, and you want to use the main BsB icon for one of your Start Menu folders. Here's how the instructions would look:
1#\Storage Card\Program Files\BsB\Tweaks\BsB Tweaks.exe,-0
Remember to always save the file with the name "icon." Always put the revised icon file inside the directory whose appearance you want to change.
Happy Changing!
Peter
P.S. Since I can't seem to add images to a post after the fact, I will submit another post shortly with images to show you what I did with my phone.
Before and After Images
As promised, attached (below) are images to show you what I did with my phone.
Peter
thanks alot man, i have been looking for days, to find a way to do this!!!!