Database Users

help with new mda lots of problems and i'm confused

ok i've done a bit of searching and i'm pretty sure its software related.
i got an mda pro from when i booted the phone up its had a o2 splash screen, so im assuming its had its software updated. so the phone works fine for about 6 hours or so but then it starts tt freeze up, propgrams stop responding and the phone wont do any thing. i left the phone like this for a few moments then i got a txt and the phone seamed to be working fine untill i went to use the camera and i got "the file camera cannot be opened. either it is not signed with a trusted cert or one of its components can not be found you might need to reinstall or restore this file".
ok so i had a look and found the Available Universal Versions and Upgrades
the thing is i'm not sure which is the best to use or how to do it.
what would you guys recomend i do ?
thanks

MDA Pro with O2 Rom?
Seems so that there is other Rom on it. Normally, this is not a Problem, but who knows, what was changed in this Rom.
I would recommend to download new Rom and install this.

Try http://www.my-xda.com/xdaexec_soft.html
Thats got the latest XDA update.... give it a go and then get the new 1.09.00 radio update too...
Hopefully that will sort you out!

chears i'll give that one a go and see what happpens. fingers crossed

ok so i downloaded the Xda Exec ROM v 1.13.188 from the above site followed the directions in the pdf file, connected the phone and made sure there arnt any programs running in the backgroung. when i try to runn the application to do the upgrade it says its trying to connect to the phone then gives
"error 201: get device data error
can not get device data
please make sure device is connected and run this update utility again"
only problem is that it is connected or so ms active sync says.
any ideas whats goign on or is there another way to update the software ?
thanks guys its apreciated

ok so i managed to get past that stage but
now i get
error 102 ce image file check sum error
the rom image file to be used for the update is corroupt. please download the correct device software update utility and try again.
i have no idea what that means any sugestions ?

@cusaeng, can't help with the ROM update but your initial problem of problems after 6 hours is typical of the Universal when its running low on RAM. Use an app like GSPMaigc+ which can really close processes and reboot once a day (obviously once you solve the ROM issue).

chears i'll look in to that program once i get the rom issues sorted
i've trued downloading a version of the jas jar rom and that give the same error message about being unable to get device information.
when i flashed phones befor eg a motorola a1000 you had to get the phone in to bootloader mode then use a progran to flash it is it a simaler process with the mda ?
i really dont know if i'm doing anything wrong or not

#2 What is wrong ?! HELP!

Hello !!
I have qtek 1010 german version! After i read the links i decided to upgrade the rom version, because i barely manage in english, not to metion german.
I downloaded a rom from http://www.romkitchen.de, i complete the setup with no errors and i thouht it was a success. Now in start menu i only have Recent Programs (with no access to tap on it), Today, Find and Help, and the screen logo xda-developers.com. Cant do anything, the best result when i tap something its : "No program memory available. Tap Start>Settings>System tab>Memory, stop programs that did not automatically stop, and try again". But in start i have nothing
I downloaded another rom version 4.01.12_ENG, but now i can not connect the pda with activesync, so i cant make another upgrade.
So, please, help!!
Thanks, Regards and excuse my poor english!
PS: #1 Was posted in a wrong section i think!

Sounds very strange.
You have done a reset after the update?
What ActiveSync VErsion are you using? WM2003 requires an Version i think greater than 3.7.....
Stefan

I was using at that time Activesync 4.2, but i downgrade it to 3.7 after the failure and still no connection. Now i'm using again 4.2.
I did the reset (after i saw the result of the upgrade i thnik i made another 4 or 5, think this will have no negative effects, anyway its as worst as is possible).
And if i remember well i did a reset with holding the power button as the upgrading soft says.

flash with sdcard
Go here http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD this will let you change the rom without using active sync

Can't start my XDA's botloader

Hi guys,
Recently I updated my XDA Orbit with the new WM6.1 Diamondish ROM. Everything went great until I tried to install the Oops 6.1 ROM. Before trying to install the Oops ROM I tried to unlock the CID just in case (with your Artemis_USPL tool)... Half way through the setup screen displayed an error saying "Connection error... Please check the USB connection...". Just to clarify I never managed to install the Oops file.
Then I tried to install the original XDA WM6 ROM but with no luck as I got the same error again. Then I tried to start the bootloader manually (by pressing the voice recorder button along with the Reset one) and instead of the usuall 3 colour screen I got a blank white one. Afterwards the phone froze and I had to reset it so that I can use it again.
I did a small search on your website but because I wasn't able to find another similar case I decided to start a new thread.
Currently my phone works perfectly fine with my previous Diamondish ROM, but I seems that I can't install anything else.
Could it be a corrupted bootloader? If so, how can I fix it?
Any help will be much appreciated.
Thanks in andance!!!

Take out your MicroSD card and then try and flash

You were right! Once I got my memory card off my phone, the bootloader started as usual. Cheers mate!!!

[Q] Updating issue :S

hey guys the recent xloud update is finally available for me in the update service tool..
everything goes fine but when i connect my phone in flash mode(backbutton+connecting usb) i get a could not identify phone error..
i tried this several times but i get the same error again and again ...
anyone know why this is happening?
EDIT : NVM ISSUE SOLVED
MODS PLEASE DELETE THIS THREAD

[Q] HTC Trophy 7.8 update

Hello guys,
I have a "small problem"
I upgraded my phone to wp 7.8 using seven-eighter, it all worked, wp7.8 looked great until i figured out i can't go to "about phone" its instantly kicking me back. The same thing is when i try to enter any thread it just kick me out instantly to main screen.
And i have no idea what to do. I tried soft reset (vol- vol+ and power) and it didnt work. I tried also to restore backup from zune. I have now older version of wp, but still can't go to messages or info about phone.
I found one or two information about this problem after updating mozart... but thats all, no solution. Any one have any ideas how to fix it?
If i posted this thread in wrong section im sorry. I just don't know where it should be.
Thanks

Hello. Have You managed to solve the problem? I have completely the same situation, and nothing seems to help it. I've tried with SevenEighter_LanguageRestore but it's the same!
I Have german version of the software, and it comes with Vodafone.

You forgot to update the languages/did not update your language correctly.
Go here http://forum.xda-developers.com/showthread.php?t=1306415
and send the correct language cabs to your phone using cab sender.