Database Users

#2 What is wrong ?! HELP!

Hello !!
I have qtek 1010 german version! After i read the links i decided to upgrade the rom version, because i barely manage in english, not to metion german.
I downloaded a rom from http://www.romkitchen.de, i complete the setup with no errors and i thouht it was a success. Now in start menu i only have Recent Programs (with no access to tap on it), Today, Find and Help, and the screen logo xda-developers.com. Cant do anything, the best result when i tap something its : "No program memory available. Tap Start>Settings>System tab>Memory, stop programs that did not automatically stop, and try again". But in start i have nothing
I downloaded another rom version 4.01.12_ENG, but now i can not connect the pda with activesync, so i cant make another upgrade.
So, please, help!!
Thanks, Regards and excuse my poor english!
PS: #1 Was posted in a wrong section i think!

Sounds very strange.
You have done a reset after the update?
What ActiveSync VErsion are you using? WM2003 requires an Version i think greater than 3.7.....
Stefan

I was using at that time Activesync 4.2, but i downgrade it to 3.7 after the failure and still no connection. Now i'm using again 4.2.
I did the reset (after i saw the result of the upgrade i thnik i made another 4 or 5, think this will have no negative effects, anyway its as worst as is possible).
And if i remember well i did a reset with holding the power button as the upgrading soft says.

flash with sdcard
Go here http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD this will let you change the rom without using active sync

Ameo Help!!!!!!!!!!!!!! Wm6

Hey, I tried the wm6 update and tried it, its prepared, the % came up then stopped and told me
The update utility cannot be used on your pda phone. please check your update utility.
Im using activesync 4.5 and my phone is uk t-mobile ameo.
There is now no software on my phone and i cannot use it?
please can someone help even to get it back to how it was?
thanks
matteus

i am not expertised on this matter but:
- did you unlock your device?
- have you tried other roms?
- did you hard reset manually it?

hey, no i didnt unlock it i realised that now. i want to reflash original rom (where can i get?) then unlock an update. i miss it already

hard reset manually will help, then you try to upgrade.

i done a hard reset many times. the 'press cennter key to reset' comes up, i push it an bak square 1. where can i get orig tmobile rom??

i'm pretty sure that the link to your rom has already been posted here several times, but i can only find the german tmob rom.
check some of the big threads about wm6 and unlocking

Can't start my XDA's botloader

Hi guys,
Recently I updated my XDA Orbit with the new WM6.1 Diamondish ROM. Everything went great until I tried to install the Oops 6.1 ROM. Before trying to install the Oops ROM I tried to unlock the CID just in case (with your Artemis_USPL tool)... Half way through the setup screen displayed an error saying "Connection error... Please check the USB connection...". Just to clarify I never managed to install the Oops file.
Then I tried to install the original XDA WM6 ROM but with no luck as I got the same error again. Then I tried to start the bootloader manually (by pressing the voice recorder button along with the Reset one) and instead of the usuall 3 colour screen I got a blank white one. Afterwards the phone froze and I had to reset it so that I can use it again.
I did a small search on your website but because I wasn't able to find another similar case I decided to start a new thread.
Currently my phone works perfectly fine with my previous Diamondish ROM, but I seems that I can't install anything else.
Could it be a corrupted bootloader? If so, how can I fix it?
Any help will be much appreciated.
Thanks in andance!!!

Take out your MicroSD card and then try and flash

You were right! Once I got my memory card off my phone, the bootloader started as usual. Cheers mate!!!

[Q] HP 614c Owner needs help

Helo all - I could really use a hand here. This is the second time I have faced this issue.
When trying to make a call on my 614c when the battery is low, it crashes. Upon reboot, the radio no longer works and I cannot make any calls. It just goes into a permanent "Seaching" mode.
What I've tried:
Reboots - warm and cold
Removing the battery for 30 mins
Reset to defaults
Multiple different ROMs including upgrading and downgrading the Radio
No luck.
Last time (3 months ago) I ended up sending it to ipaqrepair to be fixed.
They said:
"the un-official hacked ROM installed in combination with a corrupt / mismatched GSM Radio ROM, these are the root cause of the issues"
I had actually NOT installed a non-official ROM until after it stopped working in a desperate attempt to fix it. But when they got it, it was a 6.5 ROM.
This time, I had upgraded it to 6.5....but I have since downgraded to the official ROM an installed the. .89 Radio update.
It wont work at all and I can't justify mailing it away for another expensive repair.
Any ideas or assistance would be greatly appreciated. Thanks.....

Any ideas? How can I effectively "blow away" all the software/drivers and set the device up as new? IpaqRepair said it was corrupt software last time....
I've installed different ROMs via flash.dio and I tried the HP radio upgrade RUU_1.8.0_081208_MP_M089_WWE. Are their files or settings that the installs I am doing do not affect - and if so, how do I repair/replace them?
Using Sim Manager, it says the phone is not ready. It's just like the phone radio won't initialize...
This phone originated overseas (Europe) - could that be somehow causing this issue since I'm using it in the USA? Something locking or changing and no longer compatible?
Not sure what else I can do and am missing my phone. Any ideas or assistance would be greatly appreciated.

Still fighting with this....maybe onto something now?
When I get the asset viewer information for the phone it shows the radio is present and the firmware number.
the Stack Version, Bootloader Version, Filesystem Verions and Radio GDFS versions are blank.
It does show the IMEI.
I'm guessing I'm missing file/data for the radio....but reinstalling the Radio ROM HP offers has not helped (maybe not complete - just an upgrade?)
Thoughts?

Anyone have a copy of the original ROM and .81 Radio ROM?
Maybe rolling it all the way back might get it operational again....

Official Drivers/Rom/Radio for 614c
Hi,
You can download official drivers from HP website. The forum does not allow me to post the link. Just search for "official 614c drivers" in google and you wil get the link.
Also note, please install using WINDOWS XP os as installing this using other os such windows 7, windows vista etc is not possible.

Okay - I tried installing the software from the HP Website using XP - but it still isn't working. It's just like the software for the radio is corrupted and it won't replace it (does not list the versions like it should when you look at the software inventory).
Is there any way to manually do this? Any advice or help would be greatly appreciated.

If anyone can help me get this resolved, I'm definitely buying them a beer.
Basically the GSM just seems to be bricked. Last time a software fix resolved it, but I'm not sure what software needs to be installed to get the radio working again.
What is the best way to blow it all away and start over? Is there a way to manually delete the radio files - or to look at them for versions/dates to see what is corrupt or mismatched.

-Alpha- said:
If anyone can help me get this resolved, I'm definitely buying them a beer.
Basically the GSM just seems to be bricked. Last time a software fix resolved it, but I'm not sure what software needs to be installed to get the radio working again.
What is the best way to blow it all away and start over? Is there a way to manually delete the radio files - or to look at them for versions/dates to see what is corrupt or mismatched.
Click to expand...
Click to collapse
Just bumping this thread...would love to have this phone back.

Bumping once again - still in hopes of fixing this phone. Can anyone help?

-Alpha- said:
Bumping once again - still in hopes of fixing this phone. Can anyone help?
Click to expand...
Click to collapse
I guess, you will get enlightenment for the problem on your device at http://forum.xda-developers.com/showthread.php?t=455840

Bump.....
Still hoping for a solution. I have gone to a Glisten now, but do not like it as much as the 614c.
I'm open to any suggestions.

[Q] revert back to factory set OS Version

I changed my provider to Telstra Australia (from AT&T US) to force capture OEM updates, and was successful.
using this thread : http://forum.xda-developers.com/showthread.php?t=1381162
Now, my current OS Version is 7.10.8773.98. But I am encountering problems with this version.
My phone has become slow and is a bit lagging. The main problem is that, It has no connectivity problem, it turns to emergency calls only mode where there is less signal ; which didn't happen earlier.
Now, I want to revert back to the factory set version mode (apparently to which even AT&T has an update). Can you tell me how can I do it?
Or provide the thread links. I am not able to figure it out.

And I have reset my phone from setting and doing a hard reset.
The OS remains the same.

Flash a mango ROM from the carrier of your choice and you'll be back to 7720

Just Flash AT&T Mango ROM from the links of collection of all the stock ROM.
For how to flash use this forum
http://forum.xda-developers.com/showthread.php?t=1508150
I'm also on telstra rom , I have faced no such issues. No lag. No connection issue.

Thanks guys.
Pranjal : I think, then the problem would have been in some tweak, made a bad registry change.

Just do a hard reset. DO a full unlock. Install Windows Phone 7 hack tools from bazaar
using xap installer, install some registry editor from bazaar itself and make a back up of registry!
search windows phone bazaar and you'll get all the software required to do this
1)Windows Phone Device manager
2) Root manager
3) Registry editor.

pranjal87 said:
Just do a hard reset. DO a full unlock. Install Windows Phone 7 hack tools from bazaar
using xap installer, install some registry editor from bazaar itself and make a back up of registry!
search windows phone bazaar and you'll get all the software required to do this
1)Windows Phone Device manager
2) Root manager
3) Registry editor.
Click to expand...
Click to collapse
Thanks Pranjal
That's exactly what I did, and its working fine now.
Still, I'd try updating to 7.8 again and see if the same problem exists, if it does, i'll flash telstra rom and maybe get the updates then.

You are welcome to telstra rom, but I have not got the 7.8 update and i'm on telstra rom
People are saying that they have Tango update using telstra...but nothing happened in my case.
I would urge you to flash telstra, who knows may be I did something wrong?
I have tried everything...Debranding, Rebrading nothing seems to work. And no one uploads the package. You give it a try and let me know.

pranjal87 said:
You are welcome to telstra rom, but I have not got the 7.8 update and i'm on telstra rom
People are saying that they have Tango update using telstra...but nothing happened in my case.
I would urge you to flash telstra, who knows may be I did something wrong?
I have tried everything...Debranding, Rebrading nothing seems to work. And no one uploads the package. You give it a try and let me know.
Click to expand...
Click to collapse
:highfive: sure man, ill give it a try. But later, after a week or so.