i dl the mds 6.5 rom ive done everything else needed now i just need to install the .nbf file how the hell do you install it i dont see a updater utility anywhere . if it matters i have a G3
i finally got it woo running mds 6.5 on my 8125
just curious, tell us your solution plz
got the same problem
i just used the english update utiility in this thread with the msd series 6.5 rom and it worked fine . course you have to go through all the other steps to cid unlocking and all
http://forum.xda-developers.com/showthread.php?t=291215
Thank you. Succesfull update on my wizard.
You can also use the Wizard Service Tool (http://forum.xda-developers.com/showthread.php?t=329170), first unpack the .nbf file, then flash the single .nb files to your phone.
I'm not familliar with english, but i'll try my best to be understandable.
I've flashed my HTC phone with a firmware that don't seems to work. (Network can't be reached anymore). I think this is a HTC TOUCH CMDA, so why the rom does not work on my phone. This phone comes from orange france provider, and have 128/256MO memory, so it is if i understood well an ELFIN.
I've backed up my original rom before going up flashing, and rebuilt the rompack with htcrom tool (i hope i made it well or i kill myself down)...
Very simple question at least...
What is the procedure to flash it back ?
Help really needed quick...
Best regards.
Francois.
Hi,
Quite easy question
Download ELF_USPL_2.26.0000.zip from http://forum.xda-developers.com/showthread.php?t=445666
rename ur backupped rom to RUU_Signed.nbh
copy the new one and overwrite the old one in ELF_USPL_2.26.0000 folder.
Now run ROMUpdateUtility.exe and follow instructions, this should work.
Best regards
Hi all,
Before I post here I have googled over the internet looking for a solution and i have read alot but no success, i have tried many different suggested solutions but all have failed, so that I'm here to ask who have faced a similar situation of me.
My HTC HD2 was having SPL-1.42 with its original stock ROM, then I decided to upgrade for a cooked ROM so that I installed the HSPL then it became SPL-1.42 HSPL, that was fine then I'm were able to upgrade to any cooked ROM, I have flashed my device with many different ROMs even the stock ones, every thing were very fine till I upgraded to the stock ROM of leo 2.10 "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship" by via the MicroSD card and now stuck with the SPL-2.08 as shown in the attached photos.
I tried to flash again using the EXE file from my PC but it take very long time the fail even with the original stock ROM of my device, and I tried to flash using the SD card but it take very long time just showing a white screen labeled "loading..." and no more activity.
I attached some photos showing the problem.
I know its my fault because I did not read the warning in the text file that included with the ROM folder "Do not flash using the MicroSD"
So that, I'm looking for a solution... please help..
any help will be appreciated.
Thanks in advance..
Note: pardon me about my poor English.
xda_q8 said:
Hi all,
Before I post here I have googled over the internet looking for a solution and i have read alot but no success, i have tried many different suggested solutions but all have failed, so that I'm here to ask who have faced a similar situation of me.
My HTC HD2 was having SPL-1.42 with its original stock ROM, then I decided to upgrade for a cooked ROM so that I installed the HSPL then it became SPL-1.42 HSPL, that was fine then I'm were able to upgrade to any cooked ROM, I have flashed my device with many different ROMs even the stock ones, every thing were very fine till I upgraded to the stock ROM of leo 2.10 "RUU_Leo_1_5_TMOUS_2.10.531.0_Radio_Signed_15.34.50 .07U_2.08.50.08_2_Ship" by via the MicroSD card and now stuck with the SPL-2.08 as shown in the attached photos.
I tried to flash again using the EXE file from my PC but it take very long time the fail even with the original stock ROM of my device, and I tried to flash using the SD card but it take very long time just showing a white screen labeled "loading..." and no more activity.
I attached some photos showing the problem.
I know its my fault because I did not read the warning in the text file that included with the ROM folder "Do not flash using the MicroSD"
So that, I'm looking for a solution... please help..
any help will be appreciated.
Thanks in advance..
Note: pardon me about my poor English.
Click to expand...
Click to collapse
Heya i think ur stuck now on that SPL 2.08 havent heard any1 succeeding in putting hspl on it atleast from what ive read.
The cause is because u flashed that Tmous ROM trough MicroSD which overwrites the hspl.
I think if u had read the stickies more carefully this could be avoided but u can still flash Tmous roms some1 correct me if im wrong. hope this helps a bit
Thanks for replaying,
yeah you are right I have to be more careful but now its done and stuck with SPL 2.08.
anyway, I have tried to falsh it using Tmous ROMs but it faild, it says "this device is not suitable for this ROM" then exit, by the way, my device is the Asia version and I tried to flash it using the new officially updated ROM from htc.com but it also failed, it take very long time more than 15 minutes with no activity the I disconnect the USB from the device to save the battery charge, I'm afraid to stuck with a dead battery. When I disconnect it the upgrading software on my PC asking me to restart the device and reconnect it again then I did, the official upgrading software recognise the device then start to flash it but it stuck at beginning of the flashing process it just change the screen of the device to the back background with the progress bar its reading 0% and take very long time then i disconnect it.
by the way, is the any way to downgrade the SPL to 1.42 ?
any help please..
Thank you.
Last week I also face this problem. But I'm not using SD card to flash the room.
However, I backup my sd card then format the card, it become will afther this.
Same thing happened to me. This is what I did, removed the battery for about 10 seconds and flashed the original ROM. Then reflashed HSPL. It worked for me.
Thank you all for replaying..
I tried to do as you did but no success at all.
well, what next ?
Thank you
silentP said:
Same thing happened to me. This is what I did, removed the battery for about 10 seconds and flashed the original ROM. Then reflashed HSPL. It worked for me.
Click to expand...
Click to collapse
i believe to try to flash Original Rom from SD Card. not from PC.
i personally save my stock rom in SD card for future use in case of emergency.
Thanks for replaying
I tried to flash using the stock ROM is SD card but it failed, it shows a white screen with a "Loading..." word only, no activity.
Any help please..
You must use GoldCard repaired your device .Look here (Post 31 & 41) Repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card :
http://forum.xda-developers.com/show...=640183&page=4
You must change Tmous 2.07 ( in guideline article ) replaced by your ship rom 2.10.
same happened to xmoo....just letter xmoo about your problem...i hope he can help you....
ancola66 said:
You must use GoldCard repaired your device .Look here (Post 31 & 41) Repaired (with any Goldcard ) HD2 damaged when the flash rom TMOUS with memory card :
http://forum.xda-developers.com/show...=640183&page=4
You must change Tmous 2.07 ( in guideline article ) replaced by your ship rom 2.10.
Click to expand...
Click to collapse
Ok this is solution for that problem
no success yet..
but i'm confused about how to use the goldcard ?
I tried to you the attached goldcard.img from the post Id=640183&page=4 but no success.
is the goldcard.img dedicated to a specific device based on its CID ? or it can be used for any device ?
Thank you
Surely XDA Mods should take down the SD card method as there are about 10 threads a week of flashing the 2.10 ROM via SD card and getting stuck cause they don't read enough before hand - if the SD card method isn't there people won't brick their phones!!
{Solved} HTC HD2 stuck at beet loader...
Hi all,
finally I got my device running
by flashing it using Goldcard method, I bought the PSAS software and flashed it using Tmous 2.10 and now it is running fine.
well, the steps as the following:
1- getting the CID of the SD card that you are going to use for flashing you device, I used linux OS to get the CID of my SD card by:
linux host #>more /sys/class/mmc_host/mmc1/mmc1:*/cid
that will give you the CID of the SD card.
2- Start the PSAS software and must be registered then go to Calculations/Generators then select Generate HTC goldcard.
3- then click "Save Goldcard Image to file", rename it whatever you wanna name for example "goldcard.img".
4- Use HxD Hex Editor, then select Extras from the menu then Open disk image..
5- Use HxD Hex Editor, then select Extras from the menu then Open disk...
6- then click on "goldcard.img" tab then select the lines from 00000000 to 00000170 all the file content by high lighting it, then select Edit -> Copy.
7- then go to the disk tab the containing the sd card, then select the same addresses (00000000-00000170) then Edit -> Paste Write, then save the new content.
8- copy a leoimg.nbh to the SD card, its recommended to get it from the ROM that bricked your device. I'm used Tmous 2.10.
9- insert the SD card into your device then boot it to the bootloader by holding the volume switch down while your switching the device on.
10- wait for the menu to appear and follow the instruction to complete.
Thats work from me and should work for you.
by the way, I flashed US Tmous while my device is Asian.
Thank you all
and
Best regards
if you have your CID I may help you to generate the suitable goldcard.img for your device.
I think I've read that even though you are stuck on spl 2, now that you have it running you should be able to flash roms with sspl but you won't be able to change the radio.
HTML:
till now I'm not sure about the radio, any way, I'm trying to hack it, i successfully initiated the process of radio upgrading but it failed at 99%.
we gonna do it one day...
EddyOS said:
Surely XDA Mods should take down the SD card method as there are about 10 threads a week of flashing the 2.10 ROM via SD card and getting stuck cause they don't read enough before hand - if the SD card method isn't there people won't brick their phones!!
Click to expand...
Click to collapse
I tought I read througout numurous posts that the SD method is the prefered way to go?
xda_q8 said:
Hi all,
finally I got my device running
by flashing it using Goldcard method, I bought the PSAS software and flashed it using Tmous 2.10 and now it is running fine.
well, the steps as the following:
1- getting the CID of the SD card that you are going to use for flashing you device, I used linux OS to get the CID of my SD card by:
linux host #>more /sys/class/mmc_host/mmc1/mmc1:*/cid
that will give you the CID of the SD card.
2- Start the PSAS software and must be registered then go to Calculations/Generators then select Generate HTC goldcard.
3- then click "Save Goldcard Image to file", rename it whatever you wanna name for example "goldcard.img".
4- Use HxD Hex Editor, then select Extras from the menu then Open disk image..
5- Use HxD Hex Editor, then select Extras from the menu then Open disk...
6- then click on "goldcard.img" tab then select the lines from 00000000 to 00000170 all the file content by high lighting it, then select Edit -> Copy.
7- then go to the disk tab the containing the sd card, then select the same addresses (00000000-00000170) then Edit -> Paste Write, then save the new content.
8- copy a leoimg.nbh to the SD card, its recommended to get it from the ROM that bricked your device. I'm used Tmous 2.10.
9- insert the SD card into your device then boot it to the bootloader by holding the volume switch down while your switching the device on.
10- wait for the menu to appear and follow the instruction to complete.
Thats work from me and should work for you.
by the way, I flashed US Tmous while my device is Asian.
Thank you all
and
Best regards
if you have your CID I may help you to generate the suitable goldcard.img for your device.
Click to expand...
Click to collapse
I also bought PSAS and used my old TP to goldflash the card. Then flashed it with the TMOUS ROM using SD method. After that it game back to life and only way to flash other roms is using sspl. Only thing now is that I'm stuck with this TMOUS initial splash screen.
Also you can change the splash screen using SSPL,till now you can change what ever you wanna change using SSPL except the radio and SPL flashing.
now i'm looking for flashing the radio with some how.
tamAyT:
SD card method should be used a last resort and only if you know what you're doing - it's a million times easier to use HSPL and ActiveSync as if it fails it's easy to recover. I've never used the sd card method and after reading what it can do if you don't read into the ROM well enough it's not worth the hassle IMO
BladeKnight said:
same happened to xmoo....just letter xmoo about your problem...i hope he can help you....
Click to expand...
Click to collapse
HAHAHA.
For me changing the first 2 00 in de hex edit of the goldcard to 11 fixed the issue.
Radio 2.08 is greate.. SPL 2.08 is greate... So no problems a.t.m., if I need a stock rom I use SSPL...
But then again I hope someone comes with HSPL 2.x tho.
When i put on my Herald stop in bootloader.....
When i try to flash from SD, my Herald says:
-----
Checking SD Contents
Invalid Certificate
Press Any key to continue
-----
What happened?
how to solve?
I can not even with RUU
ilp 1.08.0001
spl 1.08.0001
Help me!!!
1.Connect the pc and download original rom.
2.Run RUU on your pc and flashig phone
other
1. download original rom
2. unpack the original shipped rom (winrar)
3. extracking ruu_signed.nbh
4. rename ruu_signed.nbh to heraimg.nbh
5. format storage card winth fat32
6. copy heraimg.nbh
7. insert the card in pda and run in bootloader mode
I have a few things for you to consider. The first is your IPL and SPL numbers. Your numbers are 1.08.xxxx You should start by searching for a safe method for flashing your phone based on such a low IPL (if there even is a method). From what I understand, in order to flash these custom roms you MUST be HardSPL'd.
Click here for PDF instructions
If you do not have an IPL of 4.xx.xxxx or higher then you cannot HardSPL your herald.
I assume that because you are not HardSPL'd with the security fix not in place you are unable to flash anything other than a stock rom. My suggestion is to look for an OEM or stock rom update that can hopefully get you to a higher IPL/SPL number. I know that my service provider (t-mobile) has a download available for the wing so look into that first.
Hopefully another member can clarify if you can or cannot flash a custom rom with an IPL as low as yours. I hope this helps in some way. Good luck.
-Dan
I just sorted my phone
hi,
if you haven't fixed your issue yet,
the best way is to have a good read of the two discussions i've given below. both require you to have a working windows mobile device. it could even be a PDA.
using which u need to create a goldcard.
i suggest you use the qmat method as described in this post
forum.xda-developers.com/showpost.php?p=3224093&postcount=100
either ways, read the forums fully, then see what you can do. one of these will work for sure, once you get the gold card created, u can load any rom, the original or even a higher one from htc herald.
the urls u need to review are
forum.xda-developers.com/showthread.php?t=417930
forum.xda-developers.com/showthread.php?t=572683
this will help you get your phone back... if its loading into bootloader, it means ur phone can still be saved.
ps copy and paste the above links
Hi,
first, my HD2 Leo is a french one (SFR operator).
i put lot of ROM without any problem. The last one was the Chucky ROM.
i try to put the "Cruzer 4th" : but it was a ROM based on 3.14/SPL 3.03 official HTC ROM : it broke my HD2.
i try to flash with a old HTC ROM (1.42 / 1.66 ) without success... i try with a old SFR ROM, without success. ("ID invalid vendor" message)
the only solution to get back a old SPL ( 1.42 ) seems to make a goldcard.
so: i search a goldcard for my HD2, and someone who can help me little.
i have money problem, i can't buy a new HD2 (too expensive)....
but i can make a small DONATION via PAYPAL to thanks the guy who help me to recover my HD2.
THANKS IN ADVANCE
NOTE: i don't have any access to windows mobile on my HD2. only the red/green/blue/white screen at boot. only boot via SDCARD can be OK. USB transfert seems be ok.
hint
you can flash from SD Card any firmware, even official with replacing SPL, here is the procedure
- Take any "RUU_signed.nbh" from a ship ROM and copy it to SD card.
- Rename it to "leoimg.nbh"
- Reset the device while pressing the volume down button.
I do not have experiences with it, so take it just as a hint, to be sure maybe you should try to check some threads about it, for example start with this one:
http://forum.xda-developers.com/showthread.php?t=820038&highlight=rename+ruu_signed.nbh
anyway, if you insist on the goldcard, here is the right thread for you, just put your CID number and wait
http://forum.xda-developers.com/showthread.php?t=650719
thanks a lot pedro.
i donwload now the SFR ROM... but i think it will don't work..wait and see.
about golden card, i think it will don't work , because i saw i must launch a file (enablerapinew.cab) from my HD2 windows mobile... but i can't !! : i have only the boot screen now (red/green/blue/white)
ok, i try to flash with my original ROM from SFR... not work.
- USB way : HTC flash indicator stay always at 0%
- SDCard way: have only the "loading" message advitam
5tef said:
ok, i try to flash with my original ROM from SFR... not work.
- USB way : HTC flash indicator stay always at 0%
- SDCard way: have only the "loading" message advitam
Click to expand...
Click to collapse
This article can help you get a Goldcard.
http://forum.xda-developers.com/showthread.php?t=825397
Hope this helps,
Regards
Sean
Renaming a,stock nbh to leoimg.nbh should work every time. Make sure you SD is formatted to fat32 then put the leoimg.nbh on SD card. Remember to extract a stock Rom from HTC website using 7zip or similar and only rename the ruu_signed.nbh hope it works
Sent from my HTC HD2 using XDA App