Unable to send sms with the AT command AT+CMGS - Touch GSM General
HI,
I would like to knwo the AT command for the HTC Touch ( ELF)
I can communicate with my Phone with hyperterminal, but the at command :
AT+CMGS="xxxxxx"
Return ERROR !
I think that HTC don't use this command in order to send sms !
Have you information about the AT command in order to send SMS ?
Great thanks !
regards,
Nixeus
mm Anyone can help me pleaaaase ?
Hey ppl Im havin issues using my htc P3450 as a modem to send and receive sms via hyperterminal...pls somebody help!!!!
My system doesn't detect my phone under modems in the device manager!!
Getting WING to send SMS using Hyperterminal
Guys, I can only get AT, ATI, ATV1 to work.
None of the SMS commands work.
I'm using Hyperterminal: 5600,8,N,1
Anyone else got this working?
I am using samsung SGH-L700 for sending SMS using hyperterminal. But I am getting following error.
AT
OK
AT+CMGF=1
OK
AT+CMGW="+919509050003"
> HI (Ctrl+z)
+CMS ERROR: 321
I tried connecting using both bluetooth and usb cable. I am getting same error in both the cases.
Can anyone please help me for the same.
Thanks
Same for me, I need to use my old Elfin to send and receive sms. What are the correct AT commands for SMS sending and receiving ?
Regards
Same problem here with an HTC WIND ....when setup as HTX USB Modem at COM3 y can hypeterminal to it but only responds to ATIx commans...no SMS related commands accepted always error...any special driver ?
@Nixeus I had the same issue with my GSM modem, where I got ERROR and CME ERROR 765 after the sms command line. I resolved this by forcing the sms-encoding as suggested in a stackoverflow forum.
So, the command I used was :
AT+CSCS="GSM"
Related
Sending AT Commands Fails
Hello, I am trying to have an application sending AT commands to the port COM2 of my HTC Universal. I can't manage to do it. I can send the commands but never get any response back. Do you have any suggestion ? Thanks, Lionel
Serial Communication
Hi, I'm trying to put together a program for sending AT Commands over a serial connection from my PC to the XDA. Unfortunately my XDA doesn't respond to any of the commands, and in fact doesn't seem to be able to see any serial port data at all. Does anyone know if there are settings I need to change to allow the XDA to be able to receive Serial data? Thanks, Simon
sure thing, the ultimate aim is to be able to send a command from a Destop PC to the XDA to get it to send an SMS. The specific method for doing this isn't too important, but atm AT Commands seems to be the most promising method. Any advice you can give would be much appreciated. Thanks, Simon
blackberry on kaiser
hello i have a bb connect on my htc and i can't open attatchment's i'm getting an error : "mailbox couldn't find original message ' if fowarding or replying please resend the message . does anyone here know something about it ?
O2 Zinc unable recieve file using bluetooth
Hi I have problem with my bluetooth, my phone can be detect but when someone try to sent error occured ( sending failed or unable to connect ) all the setting been setup accordingly. I able to sent file but not receiving . is there any setting at regedit lvl Kindly help
Bluethooth can send but not receive file
Hello the team ! I have succeed to create a wm6.1 rom for the MIO P550, and i have a problem with Bluethoot : I can send file, but not receiving ! Have you some idea about this problem ? Great thanks !
did u enable "receive all incoming beams"?
In WIndows mobile, or in the registre
enabling just in connections setting is enough. its better to soft reset after enabling.
A yes it's enable ! Possible to send, but not receiving....
check the value of "IsEnabled" at HKLM>Software>Microsoft>Obex its value should be 1. Also check the value of "ObexServiceMask" at same place. its value should be 3.
When it try to receive file, on the pda which send the file, it appear a message : " Connection Bluetooth failed "
Nixeus said: When it try to receive file, on the pda which send the file, it appear a message : " Connection Bluetooth failed " Click to expand... Click to collapse Have you paired the two devices?
Yes I have the same problem in WM 6.1 i can send but nit recieve files via bluetooth plz HELP