Background:
I have had MANY PPC's (so many I can't even count them) and I've loaded many different cooked ROMS and such on most of them so I'm not a complete noob on these things (don't claim to be an expert either).
However, my most recent acquisition is an HTC Advantage bought at CompUSA. I've read most of these came with a test ROM and mine was no different except for the fact that when I attempted to update the ROM to the "official" one provided to me by HTC it would not work. I always got the error "Connection lost" about half way through the process. I tried it numerous times and it never worked. On some occasions it would get stuck on the bootloader screen but I was able to get it back to working status (still on the test ROM).
I decided to try installing step 1 of Ollipro's SPL to see if that would help loading the HTC ROM. Turns out that wouldn't work either. It would get stuck at step 1 where it would ask if "PPC gone idle and didn't work or to wait 30 seconds". Tried it many times and would try to get it to keep going but the grey box on the bottom left would say the "parameters were incorrect" and would give me the option to quit, which I would. No problem, at least my 7501 was still working.
After that I tried the official HTC ROM again and I got the same "connection lost" error I had previously, except this time I didn't get anything on my PPC screen, just a black screen, not even the battery charging light behind the joystick lights up anymore. Soft reset...........nothing. Bootloader reset....................nothing. Hard reset.......................nothing. No lights, nada. The only flicker I get is if I try a reset wheen the power cord is connected. A red light flickers behind the joystick whenever I click the reset button. Any ideas or any help?
Sounds to me like the battery is just dead. I bought one at CompUSA (had the test ROM also) and I got the red ring around the joystick too when I tried to turn it on in the store. I left it plugged in awhile and it finally booted up okay. I then replaced the test ROM with the one and only available for the X7501 on HTC USA's web site. Good luck and I hope you get it working!
I think it could be battery related as well but it had a full charge when this happened. For some reason the unit has lost communication with the battery. I'm at a loss.
I got the same problem like you man !!! but i bad luck and so stupid man , i did with HTC X7501 then it dead after that i bought the X7500 then did it again , holy "... " it dead again....man ...So how your phone now bro ????
I left out the battery a half day and tried it again but still dead. Then I left it charging overnight and tried it again but still dead.
I can't believe this. I've never had a bricked device that can't be revived but after so many have seen this post and still no solutions I'm guessing it's no hope.
I met the same situation when I started to unlock Athena ( TMobile Ameo) within not fully charged battery ( less then 70%).
Solution ( try to make BL mode) with connected wallsocket charger ( not connected to PC USB slot) or find 100% charged battery. It helped me two times.
After many tries it changed to BL mode .
Now I didn't start unlock/change ROM without 100% charged battery.
I have the same BIG Problem, only red fliker when soft reset when AC conected. I wanted to update rom from russian to english and phone stoped working (black screen), and battery heats when inserted in phone . nothing to do? i read everything but i have not got any solution. I think it may be bios dead. helap us please
Lobstrick said:
I have the same BIG Problem, only red fliker when soft reset when AC conected. I wanted to update rom from russian to english and phone stoped working (black screen), and battery heats when inserted in phone . nothing to do? i read everything but i have not got any solution. I think it may be bios dead. helap us please
Click to expand...
Click to collapse
"heating battery" (i.e. discharging when inserted, you mean?), no charge led = dead bootloader indeed.
I get the same problem. My device is work, but not charge. Also like yours i have red ring around the joystick when the battery is taked out. And if battery inside, when i make a softreset it blink one time, continued to load but not charge.
You`r speaking all wonderful. But have anybody found the solution?
Hearing these stories makes me nervous. I'm on the stock ROM (mine came from CompUSA with the latest ROM and I don't have an urge to try the cooked ROM yet). I've been using my Athena daily for 4 months, it charges correctly from several different chargers I have (car, computer USB, stock wall charger, aftermarket wall charger).
However, one day 2 weeks ago I went to make a call in the middle of the day and my Athena was dead. D-e-a-d. Usually I can make it back home at night and still have 90-100% on the battery meter, so with no use in the middle of the day and a dead battery, this was weird. It wouldn't turn on, no soft boot, took the battery out and put it back in, and always got nothing.
I bring this up here because when I plugged it in, I encountered similar problems that others here are describing. It wouldn't turn on, and it didn't give me the orange charging light behind the joystick. I ended up leaving it plugged in for a while and finally I got a red ring, not the usual orange. I've only seen red when the battery was almost dead and the unit was on. Then after some more time the ring turned orange and at this point it would turn on again. I still have no idea why my battery died so fast and hard.
So, is there a problem with the battery charging system that is starting to crop up in units that have been used a while???
miha_conan said:
I get the same problem. My device is work, but not charge. Also like yours i have red ring around the joystick when the battery is taked out. And if battery inside, when i make a softreset it blink one time, continued to load but not charge.
You`r speaking all wonderful. But have anybody found the solution?
Click to expand...
Click to collapse
Hi i am no expert but i had simaler problem no display or no lights round ring no responce to any commands (ie hard reset and bootloader ) only red light flickred on reset button all i did was removed battery while pressing reset button and placed new battery and left it on wall charger for couple of hours and before doing hard reset i pressed reset button 2 to 3 times and green light round the battery came up so i tryed bootloader and it worked and insted of flashing it with pc i just loaded the img in sd card and flashed it while whole thing was on charge (i had tmob test rom before ) which i think is best way to do no hassle of losing connection or failing in half way and it works like a charm
hope this helps
and ya if you have a spare battery it dose help
New battery?
I'm a wizard user (and lots of former PDAs) looking to buy and Athena, maybe.
Has anyone tried a new, right out of the envelope, battery? these issues sound like worn out Li-Ion batteries to me. I've had them completely conk (won't take a charge at all) if I let them go completely down, and I've had them wear out and stop taking a full charge (down to maxing out at about %20, but sometimes showing %100 depending on ROM status) when I kept charging them while they're already charged.
Li-Ion batts don't sit for long periods too well, either, so if they're sitting on the shelf at the store/warehouse, they may be suffering even more than one that has been used since earlier in its childhood.
Perhaps the answer is a switched charger that stops charging when the battery (not the ROM/unit reading) gets to %100. ???
I didn't see anything like this posted. I'm terribly curious to see if anyone can resolve it.
nother AMEO dead
http://forum.xda-developers.com/showthread.php?p=1859021#post1859021
Red ring comes for a sec only try to RESET the device with Charger connected
Click to expand...
Click to collapse
same here,
i am afraid i got a dead athena too, did you guys found any solution?? i tried switching batteries. this is my first experience with a windows mobile device not powering on, in inrepairable condition.
found another member with similar problems- http://forum.xda-developers.com/showpost.php?p=1639311&postcount=24
No genius,s on here,just insults
i have read every page on the advantage x7500,being such an old phone you would thin the genius,s on here could sort it out in seconds,but all they do is insult you.i tried to update from windows 6 on radio 1.20 to michys radio 6.5
it got to 94 percent then crashed, now when i boot up i just get a black and white screen,which then turns white,if it try to reinstall advantage 6.0 the phone reets after 2 or 3 percent..will anyboby help by giving simple term advice to unbrick it? NO.will they provide links to there advice no.THEY JUST INSULT YOU AND SAY ITS IN ONE OF THE THREADS.well im a computer tech and if anybody wants there pc or laptop fixing.guess what i will return the favour with computer speak,THAT YOU CANT UNDERSTAND
Hello all!
So I have a qtek 9100 and tried to flash with "ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe", the installer started, the wizard was showing me the white screen and progress bar, sudently I get an eror message from pc, and guided to repair the erors. Meanwhile my phone gone off, and now it does not want to open, i tried hard reset, but seems nothing is bringing it back to life. I measured the battery and my voltmeter shows 3.8V, so i guess the battery is ok. I tried removing the battery and putting it back on but it doesn't turn on.If plug it in the wall charger, it doesn't lite up the charging led.
I'm kind of swetting...what can I do now?
try to take the battery off and wait in 10 minutes before you place it in.. try to on it after that.. that might help.. have heard it has helped many here in this forum.. either your bricked it or not.. 10 minutes will or might show..
Thanks for the quick answer, i'm waiting now to see if it works.
Any other tips are welcome.
no...no result...it still doesn't go on
Is there no way to Jtag one of these phones?
Sorry...what "Jtag" means?
Is there any chance that when i tried to flash my ROM to burn my battery?
Hi, I have HTC X7500 with a very serious problem. It has SPL 1.20 Olipro. The thing is that it can't get to windows mobile. When i plug it in the USB the trackball gets red and if I take the battery out and the in in turns yellow and the device gets into 3-coloured mode. It's not detected also by the computer. What can I do? Is there anyway to get everything back to normal, to restore original ROM ot firmware, wahtever it's called? Thanks!
?dead battery?
sharky56 said:
Hi, I have HTC X7500 with a very serious problem. It has SPL 1.20 Olipro. The thing is that it can't get to windows mobile. When i plug it in the USB the trackball gets red and if I take the battery out and the in in turns yellow and the device gets into 3-coloured mode. It's not detected also by the computer. What can I do? Is there anyway to get everything back to normal, to restore original ROM ot firmware, wahtever it's called? Thanks!
Click to expand...
Click to collapse
Hi Sharky.
I would hazard a guess and say the battery is stuffed.
The battery is renowned for having problems getting good contact so the first thing I would do is leave it off and plug it into the wall charger then fiddle with the battery to make sure it is making contact and charging.
If it gets to geen light then try booting.
If not ,it is then possible to flash from SD card.
Let me know how you go.
If the battery is out, I can't do anything, the LED is always RED. If the battery is in, the LED is still RED, but sometimes I can get into bootloader (3-coloured screen). What's the thing with the flashing from SD card?
sharky56 said:
If the battery is out, I can't do anything, the LED is always RED. If the battery is in, the LED is still RED, but sometimes I can get into bootloader (3-coloured screen). What's the thing with the flashing from SD card?
Click to expand...
Click to collapse
I just checked on my old athena.
When it is turned off and plugged in the light is orange untill it is fully charged and turns green.
If the battery has a poor connection it stays red.
I have an old battery that doesn't work and the light stays red.
So I would say you have a poor connection to the battery or the battery is dead.
I would not attempt to flash anything till you have a functioning battery.
Yeah, thanks, I've finally managed to reinstall ROM and the light when the battery is in is now orange. But I have another problem: when I plug in the USB cable the device gets gets very slow and freezes sometimes. Also the WiFi isn't working, but the bluetooth does so I think it's a software, not hardware, problem. Can you give me link to the original athena (x7500 advantage) ROM so that I can try with it. And one last thing: when I plug it in the computer via USB, Windows 7 doesn't seem to recognize the device, the Windows Mobile Device Center can't connect to the device. I appreciate your help till now and I hope you'll continue helping me to solve my problems. Cheers!
the corrupt wifi is a known issue wiith upgrade problems
this is the fix
http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
have a look through the wiki for various files
http://forum.xda-developers.com/wiki/index.php?title=HTC_Athena
a lot of the links don't work anymore
also have a look at the stickies in the upgrading section and doing a search using variations on your question usually finds an answer
ps
this phone was originally released when xp was the main OS so try finding an old laptop that uses this if you want to upgrade to AP4 to get SPL 3.5.
Have a read of the beginners guide as well
cheers
I've tried that fix but it doesn't help. It's obviously hardware, so I'm taking it to the service. Thanks anyway!
Hello frnds,..
This may not b the ryt place to ask the prob.. so admin plz redirect this post if needed..
Anyway today morning my phone fell off from my bed and then it didnt start..
I guess the battery is low too..
When i connected my charger it shows "battery charging" icon but i guess its not charging coz one hr has already passed..
So i tried to hard reset my phone by pressing [call]+[end]+[power] key... the phone vibrated but then nothing happened....
Now when I try to start the phone(with charger connected) it shows LG icon and WM boot screen with a text "clean boot"... After 5 sec it again restarts and won't go any further...
Plz help me out on this..
Btw my phone is LG GW550 winmo 6.5 QVGA..
First thing i think to check is the battery contacts. Because of the fall, someone could become bent and is not making good contact with the battery; and if it is low, can be not giving "juice" enough to boot...
Good luck
solved...
you were right... the contacts were bit loose and the battery was not able to recharge.. somehow i got through it and after rechargind the battery i again tried to hard boot it...
The phone is now working... and restored to factory condition
thanx..
hello im doughlas ..
the story :
i remove the SD card directly without going through the settings, then immediately turns blue and can not be turned off and getting hot from the back cover , and I wait for the phone turns itself off and I tried to charge its battery back.... im not getting anything , no blink LED charging , no detect on USB mode , or anything..
im tryin ask to several technician in my town , some say the Internal , LCD , and batteries.
but im not sure with all guesses so im open up my LCD by my self and tryin to change my LCD with the new one , but still i have nothing ..
is anyone having the same problem with mine ??
do you recognize what is the real problem is ??:crying::crying::crying:
regards
Doughlas
Samsung recommend holding down the LOWER volume and power keys simultaneously for 7 seconds and it worked for me on my A5. No more BSOD (Blue Screen Of Death.)
Make sure the phone is charged.
How does A series have LED charging indicator?