Related
When I leave my Jasjar running for a few minutes without touching it, the screen goes black and the only way to bring it back is to press the power button... but I would like to be able to press the keyboard buttons or touch the screen to bring it back... any ideas ?
and yes, "Do not lock buttons" has been checked in the Lock tab of the Buttons settings...
Any ideas greatly appreciated !
If you press that stupid 'Backlight' button it comes back on too!
Although thats pretty useless too! :roll:
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
I asked this same question long ago with no real answer, i hate the small power button and its just to hard to find... If the power button could be relocated to the PTT that would make this phone awesome...
mitchg said:
I'm running Black 3.01, and the only way I can bring the device out of STANDY is with the power button. My KeyLock is set to "Lock buttons if device is locked." The device is NOT locked, just in standby, and the only button that can get it to wake up is a quick-push of the Power-Button.
I thought there was an app that said you could push ANY button to bring it out, but I can't find that on WM6 Black 3.01.
Thanks!
Click to expand...
Click to collapse
Start>Settings>System>Key Lock
Select "Do not lock buttons"
Hello.
My solution to this problem is to use MortSaver. It can be configured:
one press on (a specified) button sends the phone to standby
two presses on (a specified) button bring the phone back
one press on (a specified) button show the time, missed calls, mms/sms, battery and phone signal
I've assigned it to the upper right (Internet Explorer) button and it does the job well.
Best regards!
jZ
Not sure if this helps, but a friend of mine broke his power button, and now wakes his device up by ejecting and re-inseting his memory card.
I have problem with power button. when push pwr button dont,t off pda, but when hold pwr then lights off.
Power is never shut off in PDAs, thats the way PDAs have been designed.
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
afbcamaro said:
I have the same problem, he is not talking about a full power down. If you hit the power button quickly the phone does nothing. However if you hold the power button down for about 2-3 seconds the lcd light turns off as it should.
Because of this I have to wait 1 minute for the unit to suspend before putting it back in the holster.
Does anybody have any idea as to why this might be happening. Im not new at this so hard reset, soft reset.. new rom... new radio...turning up side down while chanting. It does not change......
It will do it right one or twice in a week.
Maybe somebody that understands the signal that the unit receives upon pressing the power button might be able to shed some light on this.... Again the button does seem to operate just not suspend when pressed normally (1 second or less)
I have done some more research and this seems to be a common problem for some with BAs but nobody has found out why. There must be some kind of common hardware fault.. Does the power button send only one signal or is it a multi signal device.
Click to expand...
Click to collapse
Do you have a problem with turning on? First, we need to know whether it is hardware issue or not...
What you can do in the mean time with the turning off problem is by installing a poweroff app like shutdownme, psshutxp, etc etc...
Absolutely no problem with turning on from standby... Right now i just lock the phone before placing it back in the holster.
To make it clearer if you HOLD the power button down the backlight will turn off only. It will still show the display image and keys will still function (it dims)
Well, I had the same issue with the latest WM5 ROM. I thought I was too stupid to press the button, then I thought the button was broke, then I thought, I'll have to live with it.
Now that I have flashed to WM6, no problems at all! Never even came to my mind that this problem once existed. So I guess that some ROMs just have this particular bug?
Stefan
I have tried all the roms as well as 2003 and have the same issue in all of them. And im not alone.
Power off Problem
I'm in same condition.
Had the same problem when using WM2003 second Ed.
Now I've installed WM6 but nothing changed:
I cannot power-off/suspend but can turn off backlight if press and hold power button.
When in standby the button works fine to turn on the device.
Also, sometimes volume turns up continously with "noisy" beep ...
Anybody solved this problems?
Thanks,
Ruben
(WM 6 - 5.60.00 build 18125.0.4.2
radio 1.12.00 )
Power button has two modes:
1. Click mode: Click it once for a short duration. This turns off backlight and can be resumed by pressing it again or by pressing OK button
2. Press and Hold mode: Press and hold for few seconds and release. This mode will dim the backlight and no other button will bring it back. This is some kind of deep sleep in battery mode. To resume the original setting, press and hold Power button again for few more seconds.
(p.s.: I am not sure if this behavior is true for all the BA models)
April 1,
I know these modes...
It seems that "mode 1" doesn't work at all...
I would activate "Button Lock" (settings-->button--> Lock(tab)--> "lock all buttons except power button") to turn-off backlight and "lock all buttons except power button" but I cannnot...
You solved this problem?
I have had this issue of not being able to power off. One way I always got out of it was by clearing the registry hive. Unfortunately this brings the PDA back to the basic ROM. At this point the power button worked without any issues. Upon reloading the software the problem may come back. I believe the issue is related to some programs. I can't recall which program it was that seemed to cause the issue. One other thing I think that also worked was just entering the registry and getting back out and doing a hard reset.
I had the same problem with my 6600. the message button also didn't work. Believe it or not, to fix it. I banged the lower half (4-way area) on my desk a few times. Not hard enough to break the screen. But prolly hard enough to free what was prolly a sticky key. And now everything is working.
i am too
the same ...
when i press the power quickly , nothing happen
when i press the power for 2 sec. the backlight turns off
i tried every thing .... including formatting my BA
any one solve it ???
I have this same problem, my power button does`t work. i tried installing different roms but without any chance to fix it. maybe its an mechanic issue. i will change pwr button, i hope this work.
Look at one of my previous posts. I fixed it, twice, and other users have used the same metod to fix it. I think the problem is "hung bit" hardware related because you can also send it in for service, and they will change a chip, but i never had to.
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
honduh said:
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
Click to expand...
Click to collapse
The only thing that I could suggest that might help is to get yourself a good case for your phone that would protect the button from being accidentally pushed. I have never had this problem with my phone. The button actually has to be pressed and held to bring up the power off menu. Even when not in it's case, I have never had this happen; however, the phone is only out of it's case, when I am using it. In the case, there is even less chance of powering off the device.
Rod.
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
TheChampJT said:
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
Click to expand...
Click to collapse
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Find what the application is that launches when pressing the button and add it to the S2U exclusions list.
I have a verizon and my power button toggles screen off and on, so im not entirely sure, Is this a stock popup or a program you installed ? There is probably a registry entry somewhere that defines how the power button functions jsut as the button manager does for other buttons.
honduh said:
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Click to expand...
Click to collapse
I understand your point, and am still wondering what it is you keep in your pocket with your phone that shuts it off!? Anyways, why do you keep referring back to the default device lock? S2U2 performs the same way, as it locks everything besides the power button. If the power button is locked, how would you wake up the device to unlock it ???
the power button has two functions, it blanks the screen if you press it, or it brings up the power off menu when you long press it. The problem i'm having is s2u2 doesnt prevent the power off menu from coming up, where as the stock device lock does. Thus, it is possible to completely power off the phone while the keys are locked.... of course I want to be able to wake the phone up with the power button, but i dont want to be able to turn it completely off.
And i'm not sure how it turns off in my pocket, except i usually carry it with the power button face down (phone upside down) and it must press against the bottom of my pocket...
The application that it is calling is the stock shut down menu, i'm not sure how I could add this to the exception list, as I dont know how to call it remotely....
Thanks again for the replies!
The title of this caught my attention.
It would be very nice to have a registry edit that will lock the device when powered off or on device wake up.
I use S2U2 and I am really not liking it personally, but it is better then the default setup currently I feel.
First, I updated my PPC ROM I got a problem with the start screen, it doesn't show "smart mobility" any more... but I got the white screen instead! what should I do.
Second. now my active sync doesn't work any more the USB line is fine the connection setting is setted to "USB"... And I still can use blue tooth to sync..
HOW DO I SOLVE THE PROBLEMS?
Thanks!
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
rudy70 said:
Hold power nutton + Camera button and push reset button with stylus wait 3 seconds and then release the reset button but keep pressing the power button + camera button u will be then in bootloader page
Click to expand...
Click to collapse
Thank you about your advice about the bootloader page... but it doesn't solve the Splash Screen is White... Apparently it seems that my rom is also no longer can be flash!! (TT)
Ok now, I have my situation solved!
I had to turn it back to the original SPL and then putinthe official ROM to make it back up to the Original state... then re Hard-spl again....
Thanks!