Hey, i've bought a couple different screen protectors including writeshield, but they dont really do what i want them too. when i got my tilt it had a screen protector on it, which still allowed me to use the touch screen protectors , with all of the screens i have purchased, they are to thick to use the screen.
Does anyone know a place you can buy a screen protector where the touch screen is still usable??
thank you
Any screen protector made for the the Kaiser should let the touchscreen work. I have a very thick one on my old Treo that still didn't cause a problem. Is it possible that you've accidentally got your screen protector in-between the screen and the casing? Something like that might cause a problem.
dancj said:
Any screen protector made for the the Kaiser should let the touchscreen work. I have a very thick one on my old Treo that still didn't cause a problem. Is it possible that you've accidentally got your screen protector in-between the screen and the casing? Something like that might cause a problem.
Click to expand...
Click to collapse
I don't have any casing on my phone! im not sure why the touch screen doesnt work then =[, it works fine when i take it off, but with this screen protector on, it doesn't have any response!
By casing I mean the bit of the phone that you hold. Every phone has that
wow
idk what happened but its working now...
thanks for your help =]
Related
Hello.
I have a Qtek 9000 and i would like to ask a question.
Generally the screen needs a quite soft press in a button to work.
But in my device, i need to press a bit hard whenever i want to select something in the middle of the screen.
I mean that it needs more pressure in the middle of the screen than in the rest of the screen for it to work.
Is there a problem with my device or is it normal?
Thank you!
I don't seem to have that problem :-/ a light tap will normally be detected anywhere on my screen.
jmdrizen said:
I don't seem to have that problem :-/ a light tap will normally be detected anywhere on my screen.
Click to expand...
Click to collapse
Ok, thank you!
Anyone else's experience?
Do you have a screen protector? Maybe it is thick in the middle. Try taking the screen protector off. It may work.
cktlcmd said:
Do you have a screen protector? Maybe it is thick in the middle. Try taking the screen protector off. It may work.
Click to expand...
Click to collapse
Yes, with the protector the problem was big.
Now that i have removed it the problem is almost gone( now will be difficult not to scratch the screen without it, but i prefer to have the phone working right).
Thank you!
Try the "Fellows" screen protectors. It is thin and comes in packs of 20, I think. It is like a transparent sticker. Better than not having one.
On my Exec, I use Proporta's Screen Protector. I think it is scratch resistant. I have it on since I opened my Exec fresh from the box and it still looks brand new without any scratch on it.
Thank you, but i am afraid i will have the same problems.
I usually use Brando Screen protectors which is top quality (100% transparency) but in this case it seems that i can't do anything.
Screen Protectors
I personally don't see the use of screen protectors. I have had ~6 PPCs, have never used a single screen protector, and have never had a scratched or damaged screen.
Am I just that much more careful than everyone else? I think not! :lol:
My personal experience(after using over 15 PPC/Palm devices all these years) is that if you tend to use handwriting recognition or any other functions that require to "write" on the screen frequently, then it is virtually impossible not to scratch the screen.
Hi,
my QTEK S200 screen has quite some scratches. When I replace the touchscreen, will I then have a fresh new screen again? In other words, is the screen that I touch with the stylus part of the touch screen or is there still a layer on top of it?
thanks
Paul
pwel said:
Hi,
my QTEK S200 screen has quite some scratches. When I replace the touchscreen, will I then have a fresh new screen again? In other words, is the screen that I touch with the stylus part of the touch screen or is there still a layer on top of it?
thanks
Paul
Click to expand...
Click to collapse
The upper layer of the touch screen is replaced together with your LCD screen as one component.
That's what i heard from people sent back their mobile phone for service. However, it's not cheap.
Better got a protect film next time to prevent the scratch, bro.
godel.chen said:
The upper layer of the touch screen is replaced together with your LCD screen as one component.
That's what i heard from people sent back their mobile phone for service. However, it's not cheap.
Better got a protect film next time to prevent the scratch, bro.
Click to expand...
Click to collapse
the touvh screen is separately.
and you will have a plain touch screen again after replacement
yO Paul... its not expensive ... dont be afraid. I bought a item today in the following store. hope it helps you.
http://cnn.cn/shop/dopodo2-818-c-138_139.html
pwel said:
Hi,
my QTEK S200 screen has quite some scratches. When I replace the touchscreen, will I then have a fresh new screen again? In other words, is the screen that I touch with the stylus part of the touch screen or is there the a layer on top of it?
thanks
Paul
Click to expand...
Click to collapse
Ahem...They have an OEM touchscreen for our Prophets sold for under $10? I'm reasonably certain this would not work.
Try Vaseline
Try applying vaseline on it and rubbing it off afterwards with a soft cloth. It worked on my galaxy nexus s.
Well i had the phone since it came out and i realized now that there are dust going under the screen from where the stylus opening is. Everything im on a white screen i will see it. Does anyone else have this problem?
I have no dust at all under the screen on my HD, but that might be because I never use the stylus.
yes same here, i suggest never use your stylus
Why do i get black screen when calling or being called??
because of the sensors on the top left of your phone. They detect when your phone is close to something (i.e your ear) and turn off your screen, which is a good thing otherwise you (your ear) would be pressing lots of keys without wanting it.
the problem is I get a black screen and i cant get out of it even if the call ends unless if someone calls me back and I am using android 2.2 on my HD2 .
with wm6.5 there is no problem can you please help with that ??
thanks
have you got a case on the phone thats blocking the top left sensors on the phone???
Have you got a screen protector fitted,
Especially if its the genuine HTC HD2 screen protector (SP P300) with the 2 little holes around the sensors @ the top of phone
After suffering from the same fate just recently & thought initially it was a problem with the new Android ROM i was using,
I was surprised in my case that the screen protector was the culprit, removed screen protector, Absolutely fine now.
I have a screen protector but when I use win 5.6 there no problem with that, the problem start with android 2.2 I used many roms but nothing , I really love to use android its very frustrating
Make a test call by lifting screen protector in the area of the sensors OR by removing screen protector
I think it work for me,I will try it for few hours and post the results.
thank you very
Glad to hear I may of helped you,
Removing my screen protector solved my problem which was identical to yours, My phone has now been fine for several days.
Out of curiosity was you using the genuine HTC HD2 screen protector (SP P300)
I am now without a screen protector for now, But I like to protect the screen from scratches etc
I have recently purchased a Vikuiti DQC160 screen protector which does not have the 2 holes around the sensors
Once I receive it & fit it I will let you know if my phone suffers from the "BSOD" (black screen of death)
Maybe the Vikuiti DQC160 will be a better alternative screen protector for us HTC HD2 Android users.
thank you again for your help...
I did cut a littel piece of my screen protector where is the sensor located.and I think it work fine,sometimes it goes black but not like before I mean its better now.I searched about the protector that you bought but its expensive here in America,I will just stick with mine... by the way where did u found ur build??? it works fine for you ??
thank you
we all know the issue of the false click or the touch screen being too sensitive.
after trying to fix it by changing the (max1187x_touchscreen_0.idc) and change touch.filter.level= 2 to touch.filter.level= 5 found in \system\usr\idc.
it didn't work very well. so what i did is just add screen protectors to the screen.
how to fix it for sure:
buy the glass screen protector and put it on the screen.
and then buy one plastic screen protector and put it on the glass screen protector.
this should do the trick and isolate your hand from the screen a little so it does not get too sensitive by the hand.
in my situation i used one glass protector and 2 plastic screen protector to be sure that even if my hands get sweaty i will still use the phone without any issues. and i still have the touch.filter.level= 5.
now the phone works fine the added protectors can't be seen as if they are not put on the screen. i think it's not even 1 mm above the screen.
i hope this will help anyone who has issue with the screen being too sensitive.