Hi all,
i have a fresh JasJar and i need to install the .Net Compact Framework 2.0 but when i try to install (main memory) it gives me an unknow error number 4.
I have a lot of free space in my device, approx 30 Mb, so where is the problem ?
I need the .Net Compact Framework to run IBE Mail.
Bye
nicoska
Me too. I've tried closing applications, but without luck
RE
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
nicoska said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
Click to expand...
Click to collapse
I used the .exe file through active sync. I had reformatted my computer, I had performed hard resets numerous times on my EXEC and Net Framework 2 always installs without any problem to my SD Card and works very well.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
astage said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
Click to expand...
Click to collapse
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
I did not loose any internal memory. As of now after a soft reset, I have about 32MB of internal memory with 31 different applications installed. 26 applications installed to my SD Card and 5 system applications installed on my internal memory. No freezes, no delays, no missed calls, no loss of system preferences, switching from landscape to portrait or vice versa takes 1 second, so I am pleased with my settings.
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
Click to expand...
Click to collapse
So did mine, but the folder was empty :?
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
cktlcmd said:
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
Click to expand...
Click to collapse
I hope you're lucky and it worked for you!
Might be worth checking the \Windows folder, however, as that's where I found all the .Net v.2 stuff dumped. The .Net v.1.x stuff is in ROM, so I'm hoping that a future ROM update will have v.2 in ROM.
Pants - just noticed that CF2 folder on SD card is empty!
Any solution to this?
Cheers,
Steve
(Am using Opera - apologies for double spaces)
I've looked into this a bit further, and according to the guys at Microsoft http://blogs.msdn.com/netcfteam/default.aspx - the Framework will always take up storage space, and it wouldn't work if it were only installed on the SD card.
Let's hope that a future ROM release will include it.
Cheers,
Steve.
Here is what I noticed on mine. I just performed a hard reset. I started out with 31MB internal memory. I opted to store NetFramework to my SD Card which is around 5MB in size. So if what you guys claim that NetFrameWork does not install to the card is true, it should eat up the 31MB internal memory right? But I still end up with 31MB internal memory after the install. I did check my SD Card and found the folder there which is empty if I clicked on it. But, my SD Card has less memory than I started with, close to 5MB. So my conclusion is: It installs to the SD Card but maybe active sync does not allow us to see the actual file and size, so it appears the folder is empty.
According to what Microsoft say:
Installing NETCF V2 to storage card
While it is technically possible to redirect installation of NETCF onto storage card via standard Active Sync/WCELOD capabilities, it won’t save precious RAM on device. NETCF files have to be in \Windows folder in order for NETCF to function properly.
If NETCF is installed to storage card, NETCF files will be initially deployed to it. However, at some point they would moved to \Windows folder taking out exactly the same space as normal installation would.
In some cases attempt to use storage card would lead to installation failure due to some subtle storage card issues. Thus it’s not recommended to install NETCF V2 to storage card or embedded storage and there are no benefits of doing so.
Click to expand...
Click to collapse
So try installing WifiFoFum (or another .Net CF2 app) and see how your memory availability alters.
Cheers,
Steve.
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
I had a problem installing .NET 2.0 and I found that if I rename/remove previous attempted installs (eg, the dir and files), my 2nd attempt is usually successful.
This goes for most any program that doesn't install properly. I've noticed that this usually happens to me after an upgrade of the same app.
cktlcmd said:
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
Click to expand...
Click to collapse
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
StevePritchard said:
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
Click to expand...
Click to collapse
Ohhhhhhh! My mistake.
Cheers mate!
FOSA said:
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Click to expand...
Click to collapse
Great that worked for me!! Many thanks!!
J
I have installed HTC Kaizer Home Plugin, HTC X-Button, HTC Audio Manager, JUVS CommMgr6 button, reTouched Dialer, etc.
These applications I installed in the Storage Card.
I notice when i start my HTC Softbank X01HT, it become slower... until I have run most of the application, then only the speed become more stable.
So, I wondering I should install these applications into Main Memory or Storage Card? Will it be more stable if I install into Main Memory?
i just think that every app you installing tooks a small part of your hermes memory.... so as many startup application you have as you hermes will slow down
understand that.
what i worried is if i install those applications into storage card, it will load slower than if i install into the main memory.
will this happen?
wailoon said:
understand that.
what i worried is if i install those applications into storage card, it will load slower than if i install into the main memory.
will this happen?
Click to expand...
Click to collapse
No, not really - except you turn off or soft reset your device entirely, then it takes a while until your pda read out all contens on SD card - other than that they load as fast as installing in the phone. I always install my apps on SD, except for system application, never had any problems.
It's my understanding that you should install programs that run on startup, like today plugins, into main memory.
This is so that if the programs are called to run before the storage card is initialized they are available.
I believe it was MikeChannon that said this...
intrglctcrevfnk said:
It's my understanding that you should install programs that run on startup, like today plugins, into main memory.
This is so that if the programs are called to run before the storage card is initialized they are available.
I believe it was MikeChannon that said this...
Click to expand...
Click to collapse
Yeah, might be a good advice even though I never install in phome memory as long as I can avoid it. But you shouldn't take me as good example anyway (I never had issues with installing everything on SD card but I might have been only lucky up to now!)
How about this solution?:
Try to install your application on SD card first! If they do not run properly after starting up your phone then just uninstall them and reinstall them in your phone memory ...
The only 3 programs I installed in phone memory are:
SPB MOBILE SHELL (It won't install on SD)
RESCO EXPLORER 2007 (to be able to use Explorer, REGISTRY PLUGIN and FTP even when I switch SD cards or card fails)
Microsoft Reader (because of activation)
As all us Diamond owners know all too well, we are dealing with a pathetically small amount of main memory. I've got virtually no aftermarket apps installed, and my main storage memory only has about 20MB left.
Two Q's
1. Is it possible to uninstall bundled apps? When I go to "Remove Programs" I only see the apps/cabs that I've installed aftermarket.
2. Is it adviseable/possible to install apps to the internal storage card? I've always been under the impression that programs should go in the "partition" where ...\Windows resides, but that may not be true.
Thanks.
1. yes it is possible if u cook your own rom.
http://forum.xda-developers.com/showthread.php?t=413782
2. why not ? (you wore wrong )
ajd6c8 said:
2. Is it adviseable/possible to install apps to the internal storage card? I've always been under the impression that programs should go in the "partition" where ...\Windows resides, but that may not be true.
Click to expand...
Click to collapse
Every app I install goes in the Internal Storage because, well, what's the point of having 4GB of memory and not using it? I did the same with my previous XDA IIi; everything went onto the external memory card and it's never caused any problems.
cool, sometimes it's good to be wrong!
no way am I cooking my own ROM though. I would totally find a way to screw that up.
no other way to remove pre-installed apps?
and additionaly why install apps??? I have quite a long time apps folders on my internal storage with shortcuts in windows folder and they WORK so I saved space and as bonus doesnt screw up system with aditional installs after HR...
kultus said:
and additionaly why install apps??? I have quite a long time apps folders on my internal storage with shortcuts in windows folder and they WORK so I saved space and as bonus doesnt screw up system with aditional installs after HR...
Click to expand...
Click to collapse
bingo boingo!
Install apps onto the internal storage and create shortcuts in \windows with total commander. It saves memory space and also headache from reinstalling apps after flashing a new ROM.
hey all, im a newbie here, i have serched and couldnt find anything of relevence.
i know how to get programs to auto install, but is there a way to get the apps to install to the memory card and not the handset memory.
thanks
paul
SASHIMI "search for it"
Install to storage card.
CAB for install Device, SC is for storage Card, REG self explanitory.
Only applications (cab) ?
http://forum.xda-developers.com/showthread.php?t=514934
stylez said:
SASHIMI "search for it"
Install to storage card.
CAB for install Device, SC is for storage Card, REG self explanitory.
Click to expand...
Click to collapse
But,but I'm lazy and dont wanna use the search. lol j/k
are we able to run apps from sd on touch pro 2? would cab installer work?
johnafuna said:
are we able to install and run apps from sd on touch pro 2? would cab installer work?
Click to expand...
Click to collapse
I"m not sure what you are asking, so here are two answers!
1. You can install FROM a microSD card.
2. You can usually pick where to install a program once the cab file executes. There are a small minority of programs that automatically install to the main memory.
I have my games and most of my utilities running from my SD card.
stevedebi said:
I have my games and most of my utilities running from my SD card.
Click to expand...
Click to collapse
Same here. Also, there are a (very) few programs that need to be installed to the main memory to work properly. Usually, the creator of the program or app will advise you of thus, though.
If you use Microsoft Marketplace, you can set all apps to automatically install to SD card. But if the app needs to install to main memory, Marketplace will override your default save-to-storage-card!
thanks guys!!!