Touch hd & Kenwood dnx 7200 - Touch HD General

hi all. just curious to know if anyone else has paired their hd with the above head unit? My previous vario3 had no problem connecting and neither does my old nokia 6630, but for some reason the hd just won't pair. Any and all advice appreciated. incidentally I've written all this on my newest toy, cool eh?

* Bump. Sorry, but i'd really like to get to the bottom of this!

It's okay, don't worry, I've done it now.

gangrene said:
hi all. just curious to know if anyone else has paired their hd with the above head unit? My previous vario3 had no problem connecting and neither does my old nokia 6630, but for some reason the hd just won't pair. Any and all advice appreciated. incidentally I've written all this on my newest toy, cool eh?
Click to expand...
Click to collapse
I guess you have the DNX7200 and KCA-BT200? Did you install the latest firmware on your DNX7200 device and on the KCA-BT200? (on the kenwood website of your country)
I've got the KVT-729DVD + KCA-BT200 and it works great.

Mine automatically pairs with my jvc kdbt22, turn the radio on and it it automatically pairs for both headset and wireless music and will automatically stream music if I select Bluetooth on the radio via the Touchflow player.

patrickNLgld said:
I guess you have the DNX7200 and KCA-BT200? Did you install the latest firmware on your DNX7200 device and on the KCA-BT200? (on the kenwood website of your country)
I've got the KVT-729DVD + KCA-BT200 and it works great.
Click to expand...
Click to collapse
I am wondering what is different in my setup compared to yours. My HD pairs with my KVT-522DVD + KCA-BT200 alright. The phone book get loaded and I can browse contacts, but NOTHING happens when when I push the call button or pick up button on the 522DVD screen.... both units are FW updated to the latest versions.
Regards, Steffen

I used to use mine with my Pioneer FH-P80BT - worked perfectly fine
The only time I had the problem you mentioned (about receiving calls) was when I disabled the hardware buttons on my device using S2U2 or something similar (apparantly it affects the use of handsfree kits aswell!) - hope this helps...

Thanks zoomee, I think is has to do with the KCA-BT200 (the seperate BT box attached to the multimedia unit) and the capabilities of its FW. The Touch HD is not in the list of "approved" cellphones with tha latest FW, but the Touch Pro is and I would expect it to use the same protocol - maybe a bit optimistic

I know this is an older post but...
I was curious if any of you Kenwood users that have the option to SMS from your deck can use this feature with any HTC/windows mobile phone. My phone pairs with my H/U just fine (KVT-514) and does everything aside from SMS. The feature is grayed out. It's not like I will ever use it, but I would still like to make it work if I can.

SMS is grayed out on my 522DVD as well. I think you/we will have to wait until Kenwood release new updated FW with newer phones for the BT200 unit.
BR Steffen

My DNX-5260BT won't even download the phonebook! It connects but only allows dialled calls...gutted.

Dnx 5260 bt
Hi people
i have the same problem with my DNX5269BT and HD2
Any of you have a some suggestion?

Related

08 Altima Bluetooth

We just bought an '08 Altima with the bluetooth option. I can pair the XV6800 with no problem, but quality sucks. It is super choppy on my end and the person on the other end can't hear me at all. I tried my wifes XV6800, same thing. I can pair my old E815 and it works perfectly, so it's not the car. I tried a hard reset, no difference.
I tried loading dcd's clean rom 1.6.7, no difference. Is the BT stack upgraded in this rom?
Is there a newer BT stack out there that I could try?
Its worth downloading and trying the Jetware BT Extensions and see if that helps....but usually it does not change quality so much as enable functionality.
http://www.jetwaremobile.com/
Brad
Thanks for the suggestion, but it didn't help.
Developer help with Infiniti/Nissan Bluetooth?
I've got the exact same issue with an '07 Infiniti G35 w/navigation. I've been doing lots of reading on the xv6800's bluetooth, have tried DCD's and Custel's roms, and was just about to start my own thread, but I'll bet our cars are the same bluetooth/rom wise.
Jetware didn't help me either.
Here's the best fix I've found and it works for me consistently.
-Whence the option's available depending on whether you're dialing out or receiving, click the "use handset" button (transfers call to the xv6800).
-Shortly after press the "phone" button (transfers call back through car).
-Should work as expected after that.
Anyway, at this point I'm hoping one of the kind devs on this forum (DCD or Custel to name just two of many) might find a sec to help us out, although I'm aware and appreciate the fact that many other users are keeping them very busy on their own projects.
I'm assuming the xv6800's hardware would be most similar to other HTC pda phones (not sure what happens between GSM and CDMA devices), so here's a list of their phones who's bluetooth does work with my car (from here). It supports the bluetooth in 144 phones total.
Kaiser (wasn't working with stock rom, but works after this patch from HTC)
Hermes
Atlas
Wizard
Apache
Magician
Harrier
HTC pda phones that don't work with my car (at least not 100%).
Vogue
Elf
Titan
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
In addition to the stock Verizon rom I've tried DCD's 1.6.1, 1.6.7, and Custel's 1.1 with no change in the symptoms.
It's my understanding the dev community thinks modding the Vogue's bluetooth for the Titan shows the most promise. I found this thread mentioning an alternative, but it seems to have gone stale on another forum. I'd prefer not to use that forum.
I understand the Vogue's bluetooth might show the most promise for general bluetooth applications (which would satisfy the most users), but becuase I plan to use bluetooth solely through this car, does anyone know if I might be able to go an easier route given the information I've provided?
I'm using radio 1.40.00, could 1.47.01 make a difference?
Can anything be learned through HTC's Kaiser update patch?
Are there any bluetooth alternatives being tested that I haven't found?
Thanks for any help anyone can provide.
OK. I tried what you said and confirm the same results on the '08 Altima. If I switch to handset and back to Bluetooth, the sound is clear (weird). The only problem is, I can't switch until a call is in progress. This is a work around, but not a good one. We need a BT stack that fixes this. Or maybe firmware upgrade from the auto manufacturer.
I know this is going to sounds like a cheap shot, but it sounds to me like something needs to be fixed on Nissan's side. I've tried mine in an Accura without any problem, however both of your stereos are manufactured by Nissan.
A word of advice: I always found that auto makers should stick to what they do- namely, make cars. If Nissan were so great at BT stereos, you'd see nissan headsets.
I never bother with factory Bluetooth anymore- I swapped my stereo right away for a decent Sony Xplod system that supports A2DP (wireless stereo) as well as phone calls. The aftermarket stereo not only sounds great, but I play all my music from my phone without taking it out of my pocket. Last I checked, no stock car stereos supported this. Sony is good at stereo and bluetooth (been around the block a few times).
Complain to Nissan. Or swap your stereo for something decent.
My Sprint 6700 with BigJ Rom works great with the 08 Altima. In the fact the audio quality is better than the Sanyo Katana that I also have paired. I am dispointed that I cannt answer calls from both phones on the car headset without first selecting the phone that has an incoming call. Even my At&T home phone with bluetooth can do that although it does require you to select a cellphone for outgoing calls.
I was able to upload a contact entry from my 6700 to the car Download phonebook. However, I can not get that into the more usable phonebook directory. Anyone succeed in doing that?
shannl said:
My Sprint 6700 with BigJ Rom works great with the 08 Altima.
Click to expand...
Click to collapse
You might be in the wrong forum. The Titan is a 6800, not a 6700.
yes, but this thread is discussing the Altima BT stereo. Truthfully, this whole thread should go in a more general BT forum, since I don't think it pertains to the 6800 exactly.
08 altima bluetooth
Just wanted to say thanks to Park City for posting the name of the web site with the bluetooth extentions (jetwaremobile.com). I have just recently purchased an 08 Altima with the Nav system and bluetooth. I have an Tmobile MDA with a cooked ROM running WM6 and I could not get the entire outlook phone book to download to the car. Once I installed the jetware mobile extentions everything worked just fine. I even got some additional functionality I was not expecting like signal strengh and battery status on the nav srceen. As for voice quality, it's never been an issue for me. So far anyway
As I can see, they are currently testing the Mogul with both of your cars. I don't know what they mean by 'testing', but that's what is going on right now.
http://www.nissanusa.com/bluetooth/...gation+System&mfg=All+Manufacturers&x=51&y=16
http://www.infiniti.com/bluetooth/t...igation+System&mfg=All+Manufacturers&x=42&y=9
arcanecho said:
As I can see, they are currently testing the Mogul with both of your cars.
Click to expand...
Click to collapse
I saw that too, but I don't have a lot of confidence they'll be releasing a bluetooth update any time soon. That's why I was hoping the Titan's bluetooth hardware might be similar enough to the hardware in one of the devices that DO work with our cars (Kaiser, etc., list in my earlier post) that their bluetooth software could be ported "easily" to the Titan. I'm sure the devs here are trying to get the Titan's bluetooth to work as well as possible for everyone's devices, which makes sense. However, with California's new "handsfree driving" law starting July '08, I'm only concerned with getting the Titan to work with my car.
Apparently no one's too sure if that's possible.
1. have any of you verified first hand that the kaiser does in fact work?
2. could someone research and identify the bt hardware in the kaiser, and the titan?
3. has anyone run the kaiser bt fix on their titan and tried it?
i suppose i never thought to look at the kaiser's bt. mine still functions after applying that kaiser patch..
the kaiser patch is a replacement TIInit_4_2_38.bts file
this file did not exist in any titan roms prior to 2.16
2.16 introduced this file (i compared md5 and its not the same data)
2.17, htcs supposed 'fix', does NOT contain this file
all vogue roms i have seen DO contain this file, but again its different data
maybe you guys are on to something
i will throw something together tomorrow probably...drinking time.
dcd, thanks for the help, enjoy those drinks!
1. Not first hand, I'm going off this post. That thread's also why I believe the Kaiser wasn't working with the car before the patch.
2. I've spent a lot of time trying, but have come up empty on any detailed hardware specs.
3. I just ran the Kaiser patch and the bluetooth functions the same as it does without the patch.
I'm using a rom from your 1.6.7 kitchen with nothing else added (rom's working great, btw). I had the same issue with the stock Verizon rom.
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
FZ1 said:
this post
Click to expand...
Click to collapse
good enough for me
Crazy thought, but if the cooked rom I'm using is based on a stock rom that didn't originally include the .bts file (2.17), could it be being ignored?
Click to expand...
Click to collapse
maybe...i dont know how the file functions and ties into the others yet
FZ1 said:
The Titan DOES work with an '07-'08 Infiniti G35 WITHOUT navigation (buy more, get less ).
Click to expand...
Click to collapse
i take it they are completely different head units?
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it. I have been just using my Platronics Discover 640 for the BT these days... It'd be nice if someone can come up with a solution for this...
dcd1182 said:
i take it they are completely different head units?
Click to expand...
Click to collapse
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
riDuh7 said:
I have a 07 G35 WITH Navi and yes, the quality is choppy when I connect my phone to it.
Click to expand...
Click to collapse
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to, the nav runs off that hd, the gui which controls much of the car is different, voice prompts are different, the available buttons are different (see attached pics), and you lose a cd changer. I do know first hand that w/o nav the bt works great with an XV6800 (got a loaner once). Again, I've been unable to find out what's specifically different hardware wise (even with the full service manual).
Is choppy quality your only problem? Are your symptoms different from ours in my earlier post?
Click to expand...
Click to collapse
Once connected, I get a really static noise from my end while in the conversation. Of course, it'a really not usable at all....
I'm going to try the reconnecting method that was mentioned above today. I'll come back and report the outcome. And thanks for the help BTW.
EDIT: BTW, my Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
FZ1 said:
They're pretty different. With nav you get a 10 gig hd it'll rip cd's to
Click to expand...
Click to collapse
whoa, someone hook me up with a G35 to uh, test
Wizard (Cingy 8125), Hermes (Cingy 8525), Samsung i760, and few of the Moto handsets are all fine paired to my car. MAYBE, someone can get the BT stack from Hermes to work with the Titan?
Click to expand...
Click to collapse
well, peices of it maybe. i would blindly guess that the kaiser is closer to titan than hermes, but we need to exactly identify the bt chip in each. plus its still shady then, ie the kaiser has tnetw1251 for wlan same as the titan and I cannot get their newer wlan driver to work on my device.
what we really need to look at is previous bt stack modifications for other devices. i need a better understanding of tiinit_blah. I've also noticed that the devices that work have a more extensive, or a 2nd audiopara file that sets values for some bt devices. to be completely honest right now i dont know what im looking at and i need to figure out how it all fits together before i know where to start.
Well, I tried reconnect method from both phone and the car, but neither did anything at all. The quality is still crappy as heck. Man... I reallly wish this works.
EDIT: Actually my side of the speaker was complete static, and the other side could not hear what I was saying AT ALL. This efing blows.

Parrot bluetooth ck3100

Does any one have one of these bluetooth car kits and if so does the HD pair successfully?
Yes works not problem with mine - much better that with my tytn ii. calls fine both from parrot & phone answer and hang up & contacts all OK.
you should try the THB CC9060
works very well with my HD and you can A2DP the music to the audio input of the ICE
CK3100
I have S2U2 installed, and use a Parrot CK3100 Kit, and have no problems whatsoever making or receiving calls! I've used several WM devices on the same kit and never had a problem!
Hi,
I have a parrot and I also do not have any connection at all. The parrot keeps asking me for a password.
I have read that you can update the parrot device with bluetooth, so I will try it and I will let you know...
Yes S2U2 installed and no problems, if you have never updated the firmware on the parrot it may be worth looking at that, I had to upgrade it when using my tytn ii as it kept dropping - after the upgrade problems disappeared.
I have 3100,HD and S2U2 and no problem at all.
But I updated to the last rom of Parrot's hads free (look for in his web).
It has few improvements, one of the with WM phones and an other one, very important for me is the possibility to increase the characters cize (for the contacts) in the screen (they were too small before).
Try it
Yup, I have an HD with S2U2 and no problems.
I updated the firmware of the CK3100 about a year ago. When was the last firmware update released?
I have a Parrot 3200 in my car and it took several attempts to get it to hook up. Used to have a 3100 in the wifes previous car - IIRC my diamond took a few goes hooking up to that also (the p/w is 1234 for those IIRC) I found that after an unsuccessful attempt, a soft reset then try again and it worked first time - might be worth a shot?
Here you will find the info to update:
Software program:
http://www.parrot.com/uk/support/downloads
Instructions+info:
http://www.parrot.com/uk/support/onlinehelpguides/parrotck3100ck3300ck3500
Latest version is:
CK3100 : version 4.18b
Hi,
Found the solution to my problem. I had already 5 phones in the list .
Removed one and paired the HD Touch without any problems...
Hi,
I also used the parrot ck3100 in combination with Touch HD. First it didn't work. Also had already 5 paired devices ;-). After removing one it still didn't work. Updated the Parrot with my laptop and the Parrot update device and now it works splendid!
twilsens said:
Hi,
I also used the parrot ck3100 in combination with Touch HD. First it didn't work. Also had already 5 paired devices ;-). After removing one it still didn't work. Updated the Parrot with my laptop and the Parrot update device and now it works splendid!
Click to expand...
Click to collapse
great to hear, same problem, just downloaded the software will let know results.
Is it not possible to upgrade using our HD's? I'm not sure the Bluetooth will work on my laptop with it having Windows 7 on it...
petest said:
Does any one have one of these bluetooth car kits and if so does the HD pair successfully?
Click to expand...
Click to collapse
I have got 3200color. it's paired successfully. But for the contacts i am not sure since I have it transfered to 3200Color before.
Okay, it all worked fine. That's actually the second time I've updated the firmware... not sure I notice any differences.
Has anyone used the VCF creator?
http://www.parrot.com/uk/support/downloads

Bluetooth pairing problems on Infiniti/Nissan

Has anyone had any problems pairing their X1 with any Nissan or Inifniti cars? There seem to be some mumblings on the web about their cars and WM6 devices and I've had no luck getting it to work on my '08 G35. Thanks.
bluetooth pairing
i just checked the aproved phone list for your g35 and the x1 is not aproved by infiniti. only certain phones will link to our cars others will not
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
it also depend if you both have navagation or not
elee888 said:
I have an 08 G35 and have no prob. pairing it with my car. How are you pairing this up with the car?
Click to expand...
Click to collapse
I don't have the navigation so I just click the phone button, tell it I want to pair a new device, and have my X1 start searching. At least now I know it can be done. Thanks for the reply
Well... I do have the navigation. So maybe the pairing process is a little different. But it should work though, it even allows me to download the whole phonebook into the car. Something my other phones in the past did not allow me.
baashha said:
Managed to solve this now.
Of course both Merc & SE didn't have any good solutions.... so had to continue googling & XDA-ing... This is what I did:
i.) Jetware, as I posted earlier has been removed.
ii.) I still had the SAP Profile addition downloaded from one of the forums in XDA on.
iii.) Change Registry setting:
HKEY_LOCAL_MACHINE\Software\Microsoft\Bluetooth\Sys\COD
the default is 5898764 (Decimal) which is "Telephone (Smartphone)" which you would think would work. Changed to 5374476 (Decimal) which is a normal phone.
iv.) Restarted the phone.
v.) Started the pairing process from the car - failed as per before.
vi.) Started the pairing from the phone, and they work!!
Now, they pair automatically as how they would before....
Ram
Click to expand...
Click to collapse
this is how i got mine working with my pioneer deck.
here's the link to the SAP Profile he was talking about.
http://forum.xda-developers.com/showpost.php?p=997872&postcount=166
hope this works for you.
which PIoneer do you have?
I have the DEH-P5900IB and a BT adapter, and i can't get my X1 connect.
All my previous phones worked fine.
it looks like the X1 won't let me pair without passcode, and the radio says Error.
Do you mind explaining exactly how you did it?
Thanks
i have the DEH-790BT.
what i did was after i changed what i mentioned above, then i set my deck to be able to be noticed by other bluetooth devices, then added it through my X1. After I added it through my phone it said successfully connected on my deck and the phone displayed it connected as wireless stereo and hands free. now the only weird thing was it was trying to connect as both the wireless stereo and hands free which seemed to mess with the deck, so I had to turn off my ignition and turn my car back on for it to actually recognize the connection fully. oh and the passcode if you connect through the deck to phone like I did it should be default '0000' but i would check your manual just to be safe, and if your connecting through your phone to the deck (which i haven't tested so I don't know if it works) you can pick your own passcode, which i suggest just making 0000 or nothing.
I have a problem also with my HTC Touch HD (Blackstone)
I can pair with my Nissan Qashqai carkit but soun dis very bad, and the caller on the otherside doesn;t hear anything.
Strangly, but try, when during a call i switch from carkit to phone and back (using the options in my carkit/buttons on stearing wheel) everything is fine!
Checking the internet learned me that this is related to the bluetooth stack (or settings) in WM6.1 (and 6.5 also)
So does anybody have any idea how to solve this, maybe by registry changes or maybe by even "downgrading" the Bluetoorh stack to 6.0 or maybe even 5.x.
Maybe it is also possible to replace the complete MS stack for an other stack?

Bluetooth BMW and HTC HD2

Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
I have exactly the same issue. The HTC HD2 works ok for calls etc but the phone book upload is "please wait" forever. Very annoying. I have the standard up to date ROM and BMW X5 2009 model. Any help would be great.
Thanks
mrickenbach said:
Hi
I have a BMW X5 and a HTC HD2 with the newest ROM. When I enter the car, HD2 is recognised automatically by the car and I can place phonecalls dialing from my HD2. The only thing that does not work is that BMW tries to upload my phonebook from the phone but it does not get it. BMW says "please wait" - forever.
Before I flashed the ROM, this worked. Anyone has any ideas? I would even pay for someone in Zurich who comes and fixes this. One thing I could do of course is to downgrade my ROM again. But before I do this, I want to explore any other options.
Thanks a lot!
PS: jetwaremobile.com definately does NOT work on HD2
Click to expand...
Click to collapse
So any ideas? Now we are already two you can make happy! Thanks
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
HD2_Noob said:
Hey..
I don't have a BMW neither a bluetooth radio BUT i somewhere read in this forum, that there is a fix, to let the hd2 be recognized as normal phone
I know I'm not that much help , but I hope u can find the thread here good luck =)
Click to expand...
Click to collapse
I have a 2008 BMW, and I did experience this the first time..I sat there waiting for a few mins adn then got bored...but after I had turned the car off, been away and come back..it transferred straightaway.
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Works fine here with a BMW 5x from 2008.. Using miris 6.5.x ROM
Funnily enough, when I had my iphone (yes..sorry) I had the little image of the phone next to the BT signal on the display. I don't get this straight away with the HD2, but it always eventually appears..and then stays there until I hard reset my phone and do a ROM upgrade and then start the pairing again..where I just get the BT signal...then randomly..a few weeks later, the phone image appears again....very odd
Click to expand...
Click to collapse
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
schrej said:
Hi, I also have a 2008 BMW (E93) and I do see the phone logo. It also syncs about 250 of my >3000 contacts. With my TyTN2 I used "Jetware Mobile" to sync just one dedicated category. But that doesn't work anymore with MinMo 6.5
Click to expand...
Click to collapse
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
bmw
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Which ROM do you use 1.66? or earlier? With my earlier ROM I had no problems, but since I upgraded to 1.66 (German), the phonebook does not transfer...
Bluetooth auto control problem
I can’t control my bluetooth (on/off) when using Inesoft phone profiles/controls; I have also tried other programs but no success(in another program the window of bluetooth was disabled); through all programs, I could control phone, WIFI, and gprs but not the Bluetooth. The only way to turn the Bluetooth on/ off is the Comm Manager (Manually); could anyone help please. Thanks
2006 bmw
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
zipolly said:
I use the latest 1.66 wwe rom off t he htc website with no problems at all .
Click to expand...
Click to collapse
thank you, I am glad it worked for you...you must have a newer generation ULF than me then.
Is your phone HD2? mine is Toshiba TG01..I have managed to make it work 50/50 of the times, but I do not know WHAT CHANGES are between it working and not working...it is very frustating to know (and experience it working) that it can/should work, but not being able to
I have a new HTC Mini HD and have the same problems with my 2009 BMW 3. BT Headset function works just fine, but iDrive keeps trying to sync the telephone book, unsuccesfull. Instead, my phone's battery gets drained. Anyone any sollutions?
Unfortunately I don't have an answer for your question, but it sounds like it might have something to do with the bluetooth stack used for that ROM/Radio not being recognized by the car. Perhaps the layer that deals with data transfer is removed. Sorry I can't be of more help here.
What I can do to help is to offer a warning. I am a former BMW Client Advisor, and have been told many, many times by service technicians that using phones which are not specifically approved by BMW can affect your car's ECU (brain) and if it needs to be repaired or replaced, it will not be covered under warranty. That could be just nonsense to force you into buying only phones which BMW has tested (or vendors have paid for a marketing fee), or it might be spot on, in which case you run a pretty big risk.
Hope this helps.
OK, problem solved. BMW updated my carsoftware to its newest version last week and now my HD2 works perfectly with my car (again). I can make calls AND my phonebook is synced as well.
Hint1: Try if your phonebook sync problem exists with the SIM contacts as well as with the phone contacts
Hint 2: worldwideweb.bmw.com/com/de/owners/navigation/bluetooth/compatibility_check_intro.html
a_petrov303 said:
oh yes it does!
in fact, this is the only thing that works in Jetware with WM 6.5 - nothing else works in my case
i have a 2005 X5
Click to expand...
Click to collapse
zipolly said:
i have a 2006 bmw X5 and the phone book works perfect so does everything else very happy )
Click to expand...
Click to collapse
Hi All,
I have a BMW X5 2005 model. I can pair the phone OK but it constantly disconnects and reconnects once the transfer of the phonebook occurs. The phonebook transfers always start from scratch when this happens and nothing gets loaded to the car's phonebook.
If a call comes in, or if I make a call while it is connected (like within 5 seconds) the phone stays connected for the duration of the call.
I have tried all the Regisrty tweaks and none change the behaviour.
I also read it is because the HD2 uses Widcomm BT stack and not the MS BT Stack.
Zippolly and a_petrov303 and all those that have it working, can you please tell me which Rom you are using? I am using the latest Energy's 6.5.x rom. i noticed someone mentioned Miri's 6.5.x Rom works.
Thanks,
Rob
I have a 07 E60. The HD2 pairs fine, synchs contacts fine, but the sound quality is so bad it's not useable. Of course bmw says it's not a compatible phone, but I think there is a problem with the car as my Diamond won't find it, even though it is supposed to be supported
its mainly due to the car bluetooth, BMW etc don't make the car kit mostly siemens do and they are slow on the uptake of doing updates.
anybody found a snap-in for the hd2 yet?
I have a 7-series F01 and it is really annoying to have to deal with that usb cable...
Ontopic
I had the BT problem too, deleting the profile and repairing the phone did the trick for me...

X2 and PBAP (Phonebook Access Protocol)

Anyone can confirm that the supposedly present PBAP protocol is working ?
Altough my X2 is working generally better than expected, the my Alpine Car stereo is not able to show the phone's contacts.
That Car stereo was able to show the contacts with almost any phone I tried in the last couple of years.
Notably the samsung i780, the Xperia X1, the imate 8502 (which is a Mobinnova product), all the sonyericsson featurephones (k800, w995, G705, etc...).
So, is that protocol truly present (as stated on the bt cpl), and there is some compatibility issue, or is simply missing ?
Can you share your experience ?
I have no problems with the RBAP protocol on my Parrot MKi9000.
Maybe there's a problem with you Stereo.
Cheers.
Jolo_ said:
I have no problems with the RBAP protocol on my Parrot MKi9000.
Maybe there's a problem with you Stereo.
Cheers.
Click to expand...
Click to collapse
Thanks for the info.
Maybe wm 6.5.x has changed something on the protocol so the radio won't recognize it.
I'll try to flash the radio with the latest firmware to see if the problem is solved.
I haven't upgraded the FW, since it worked W/O a single problem, with any device I tried (excluding the N900 that was released w/o PBAP support).
Ok, updated the car stereo's firmware (not so easy task) to the latest revision, the caller ID is still unsent, and the phonebook unavailable from the radio's display.
The compatibility list of this FW is huge
http://italy.alpine-europe.com/file...ion3.60/CC_CDE_103BT_CDE_113BT_ver3_60_IT.pdf
So I'm still convinced that something is wrong on the X2 itself or on the windows version installed.
I have the same problem, my car can access the phone book on other phones, but not on the X2.
Anyone know what to do?
svert said:
I have the same problem, my car can access the phone book on other phones, but not on the X2.
Anyone know what to do?
Click to expand...
Click to collapse
I have the X2 and a JVC KD-NX5000 car stereo (outboard/integrated BT attachment). The X1 worked fairly flawlessly over BT (with gtrab's custom firmware).
Although I have not figured-out how to get MS Voice Cmd on the X2 to initiate calls from the JVC, the following software cured the Phonebook problem:
http://www.jetwaremobile.com/
They offer a free 30-day demo, and it's only $15 for the registered version. There's a command on the menu where (once you are paired with your BT radio), you 'force-feed' the contacts over to the radio. Worked like a charm for me. And, it's actually a bit preferable to the 'phone handles it' method. On the X1, it took the phonebook on its own, but it would update only under unknown/unexpected circumstances. With JetMobile, I believe you can re-send/overlay the contacts whenever you'd like.
(Note: This is using X2 and the May MR2 firmware release with the Saturn theme.)

Categories

Resources