HP 6828 network repair - iPAQ rw6828, XDA Atom General

Anyone knows how to repair after changing PA still no help?

any pro here can shade some light ?
please ,thank you

i thing this will help you.
http://forum.xda-developers.com/showthread.php?t=509100
regards.

Related

anyone knows where i can repair my XDA II

It has a problem with the port on the bottom, it can not be charged and sync with my PC.I'm in Harrow(London),so anyone knows any local shop that i can come to fix it?
thnx

QTEK 9000 - urgent help needed

Hi, can anyone help me. I just bought a QTEK 9000 in a electronics shop, so called new, but I have doubts that its brand new. Can anyone help me to sort this out? Thanks, Jane
Yes of course many people would like to help you if they can
You could upload some pics of your mobile and tell us where did you bought it from.
Also you could tell us where are you from. You could arrange a meeting with a member that is located near you.
That's all I think.
...check under:
Start / Settings: System, Device Information.
Check the Call Duration. A new Device should have all values on zero. A hard-Reset usually doesnt clear this...
regards
Horst
thanks
indeed the QTEK was not new....
Thanks for the help, J

HP 612c "NO NETWORK" after factory reset, SHIFU please HELP !

Hi there everyone Im new to this site so bare with me
[[[This problem/s has been solved. pls read below for details.]]]
Im at a lost when i "reset factory settings" on original Hp Wm6.0 and somehow my radio network "kapoof" no longer there...... Did any one of you had this problem b4, i wonder ? I went to Hp service centre in Sg but the phone was out of warranty and i was pissed when they only quoted me to replace the phone instead of remedy my network problems...
Wifi,bluetooth,gps on this 612c etc works wonderously. Could this be a ripped off from the service centre to get me to pay for my iching fingers ?
I had this same problem with my O2 atom life, i reflash with Wm5 and it works and i am happy that those blood suckers servicemen did not get my money then. I ha reflashed to Wm6 and now "MWG Wm6.5" then and it has been working in perfect condition except for the bluetooth on he atom which i dont border..... my main concern here is this half bricked 612c.
Is there any ShiFu "Master" here could tickle me to the site or a link to re-encode and load the radio signal which was lost during the reset of factory settings, i will be very gradfully to donate couple of "beers".......... Cheers to all the Shifu here, keep up the good work...........
Incidently, i have tried all the roms from Hp website which i had tried online with the HP servicemen and nothing seems to work ! Its driving me up the wall with no mercy / remedy ?
I tried also changing simcards,overseas simcard,unlisted simcard and still "NO NETWORK"
Surely there must be some flashing of the radiofirmware-rom or something like that ? isn't it, MASTER ?
Definately Hardware i am sure has nothing wrong..... bcos i had opened up the phone, check all the attenna contacts but still no network........ grrrrrr !!!
Anyone here,please anyone can help me ?
------------------------------------------
Owned IPAQ hw6960 flashed with new rom from HP in perfect working order now with WM5.1.
O2 MWG Atom Life, Flashed with 6.5 with some bugs with bluetooth but doesn't matter.
Nokia 6220 classic. perfect working conditons.
PS. if you need any help from my working phones, let me know but i am just a beginner, you need to give me good instructions like how to backup safety. I'm into repairing computers,hardware and software so i'm willing and maybe able to help some of you guys who brick yours
write me here [email protected] if i don't reply or i am busy,pls include header XDA-developers members as a subject, we'll see...
deranche.
______________________________________________________________________
Hi there guys, this is to inform All at XDA, i have found my bug and have released my IPAQ 612c.
I should kick whoever made these freaking problem with my network locked So, the problem with my IPAQ was that my IP lock the phone which i was unaware of it........
******to ulock (use enablerapi.cab to unlock it)******
located somewhere in this forum. do a search, you will find it. if you cannot find, PM me [email protected] but no spam pls. hahaha.
Thank you for your replies and concerned tho i solved myself kikiki.
Derek.
ps. God bless all, now i can install new roms and be a chef of ipaq 612c. gigigi.
deranche said:
Hi there everyone Im new to this site so bare with me
Im at a lost when i "reset factory settings" on original Hp Wm6.0 and somehow my radio network "kapoof" no longer there...... Did any one of you had this problem b4, i wonder ? I went to Hp service centre in Sg but the phone was out of warranty and i was pissed when they only quoted me to replace the phone instead of remedy my network problems...
Wifi,bluetooth,gps on this 612c etc works wonderously. Could this be a ripped off from the service centre to get me to pay for my iching fingers ?
I had this same problem with my O2 atom life, i reflash with Wm5 and it works and i am happy that those blood suckers servicemen did not get my money then. I ha reflashed to Wm6 and now "MWG Wm6.5" then and it has been working in perfect condition except for the bluetooth on he atom which i dont border..... my main concern here is this half bricked 612c.
Is there any ShiFu "Master" here could tickle me to the site or a link to re-encode and load the radio signal which was lost during the reset of factory settings, i will be very gradfully to donate couple of "beers".......... Cheers to all the Shifu here, keep up the good work...........
Incidently, i have tried all the roms from Hp website which i had tried online with the HP servicemen and nothing seems to work ! Its driving me up the wall with no mercy / remedy ?
I tried also changing simcards,overseas simcard,unlisted simcard and still "NO NETWORK"
Surely there must be some flashing of the radiofirmware-rom or something like that ? isn't it, MASTER ?
Definately Hardware i am sure has nothing wrong..... bcos i had opened up the phone, check all the attenna contacts but still no network........ grrrrrr !!!
Anyone here,please anyone can help me ?
------------------------------------------
Owned IPAQ hw6960 flashed with new rom from HP in perfect working order now with WM5.1.
O2 MWG Atom Life, Flashed with 6.5 with some bugs with bluetooth but doesn't matter.
Nokia 6220 classic. perfect working conditons.
PS. if you need any help from my working phones, let me know but i am just a beginner, you need to give me good instructions like how to backup safety. I'm into repairing computers,hardware and software so i'm willing and maybe able to help some of you guys who brick yours
write me here [email protected] if i don't reply or i am busy,pls include header XDA-developers members as a subject, we'll see...
deranche.
Click to expand...
Click to collapse
Which FW and OS have you installed ? There's a WM 6.1 upgrade on HP's site (sp40097.exe) ....
Dirk

[Q] screen issue help please

Hi, new to this site and wondering if someone could help me. For some reason my HTC trophy won't respond to me trying to activate the status bar or when my phone tells me that there is WiFi networks available it won't switch to the settings screen for WiFi. Has anyone had this problem??
Thanks
John

[Q] Qtek 9100 WM 6.1

Hi,
i have a problem and maybe somebody can help mi.
I would like to that if my Qtek commes out standby automatic a SMS ("Help i am having troubles") commes to my GSM (my GSM number).
It'is for my old mother.
So, the only thing she have tot do is putting the "ON" button.
Maybe this question is too much, but maybe someone can help mi.
Thanks a lot.
Pity that no one can help me.
I am sitting here than on the wrong forum?
Can someone tell me where i or should be?
Sorry for my bad English.
I do note understand well.
So many great programmers on this site and nobody can help.
I regret very much.
OK, i have another solution.
This should be closed, thank you.

Categories

Resources