Related
I just moved into this new place, just got the Cox Cable internet installed yesterday, picked up a new "Belkin N Wireless Router" model # F5D8233-4. Works fine with the laptop- I've had it setup using unsecured, WEP, & WPA/WPA2 Personal. No problems on the laptop. Inexpensive Dell Inspiron with Vista Home Basic.
However, the Wing will not cooperate at all. It only wants to connect to unsecured networks. It will connect to mine and others it detects in the appt complex. But as soon as any type of security is enabled it just tries to connect for a few seconds, then the network becomes unavailable. I'm soo tired of clicking around in the Wing with this stylus, I'm about to throw it out the window.
I've set up a static IP on the laptop so to better work with port forwarding & Azureus. Will this have an effect on what I'm trying to do? I can't see how it would, but I'm no expert.....
So here's what I've done. In the routers setup page, I've selected 64bit wep, typed in a passkey and hit generate. Wrote down the 4 keys it generated, saved the changes and exited the router setup. I think where I'm messing up is what I should be doing next with the Wing. Can anyone walk me through this?
About the only thing of note that I've done to the Wing as far as tweaking is concerned is to install Home Screen/Battery Status, overclocked to 260, and tweaked the registry to allow ring tones from the sd card.
HELP!!
maybe your wing uses the same ports as the ones you've forwarded to connect to your router. You should always make it really obscure (something like 65530-65534) to make sure that there are no conflicts between other apps and any port related protections your ISP may have implemented.
You are setting up your wing with the key, right? It might just be that the wing is incompatible with 64bit wep.
Let me clarify- the port forwarding was set up for the Azureus bit torrent client. Way obscure ports-in the 49,xxx-50,xxx range.
Yeah, setting up the wing with the key. The only choices are 64 and 128bit wep. And the WPA/PSK. Neither work. When the little window pops up asking for the net work key, I enter one of the ones I wrote down. The thing doesn't seem to be compatible with any type of security. Which kinda sucks....To use the wi-fi at home, I have to leave my router open to "signal thieves".
thats funny, actually.
I have my linksys wrt54g set to 64 bit 10 hex security and it works just fine. Maybe your problem has something to do with the wireless n part of your router? The wing is not compatible with draft-n. Does your router also broadcast with wireless-g or b?
It does...I just switched it over. Waiting for the Wing to reboot then I'll try again. Good thinking.
Ok, that didn't work either. The selections in the router are
1- Off
2- 802.11g,
3- 802.11g, 802.11b, 802.11n
4- 802.11n
It was on #3, I changed to #2 and no luck. Grrr...
Have a look on your wireless lan power settings, my Wing also had huge wifi problems all fixed when I changed the power to better performance.
I think I found a thread that mentioned that while researching this problem. Anyways, I've already made that change.
Which network adapter is the wi-fi one? Is it this- "SDIO WLAN Wireless Adapter"?
oh by the way just remembered something from my noob years.
make sure that your wing's adapter connects to "the internet" not "work"
fzzyrn said:
oh by the way just remembered something from my noob years.
make sure that your wing's adapter connects to "the internet" not "work"
Click to expand...
Click to collapse
lol, Already made sure of that. Thanks tho.
I've had the exact same issue with my MDA and originally with my Wing. It works fine now, I'm not sure why.
I just flashed to Open Touch 6.5. Still a no-go.
ok am new with this i got the tmobile wing and with the wifi i can use the internet right so that means that if i don't have a data plan i can still use the internet without getting charge for data can someone explained to me the wifi issued thanks i don't want to use the internet and later get a big bill cause i don't have data plan on my phone thanks...
so what's the wifi on the wing for???
ghostnj said:
ok am new with this i got the tmobile wing and with the wifi i can use the internet right so that means that if i don't have a data plan i can still use the internet without getting charge for data can someone explained to me the wifi issued thanks i don't want to use the internet and later get a big bill cause i don't have data plan on my phone thanks...
so what's the wifi on the wing for???
Click to expand...
Click to collapse
The wifi is just like a laptop's wifi, it connects to a wireless router and since it's not going through the cell phone towers, it will not charge you.
ivanmmj said:
The wifi is just like a laptop's wifi, it connects to a wireless router and since it's not going through the cell phone towers, it will not charge you.
Click to expand...
Click to collapse
ok thank you very much
OMG....I'm getting soooooooooooooo tired of dickin around with this thing. Now it won't connect to any network, secured or not.
I tried importing a certificate from IE on my laptop, because I got an error message on the wing saying the net work needed a personal certificate to identify me. Didn't work.
I tried a hard rest. Didn't work.
I've tried about 56,345 soft resets. Didn't work.
If there were any trees in the state of Kansas, I'd go bang my head on one of them. :
KidJethro said:
OMG....I'm getting soooooooooooooo tired of dickin around with this thing. Now it won't connect to any network, secured or not.
I tried importing a certificate from IE on my laptop, because I got an error message on the wing saying the net work needed a personal certificate to identify me. Didn't work.
I tried a hard rest. Didn't work.
I've tried about 56,345 soft resets. Didn't work.
If there were any trees in the state of Kansas, I'd go bang my head on one of them. :
Click to expand...
Click to collapse
It works fine with my current ROM. (JustMe by... Me. lol)
I'm pretty sure it's not a ROM issue...I just flashed this thing late last night. It started not connecting to anything late afternoon yesterday, while the stock T-Mobile ROM was installed.
The stock ROM never worked properly for me...
Try another ROM.
Hi guys,
To make a long story short I recently bought a Touch pro (im with alltel). I have installed wmwifirouter on my phone in hopes of using my phone as a router to connect to xbox live. Unfortunalety I have running into the problem where on the xbox live test screen it will not go pass the MTU test. I always get the MTU error status and I cannot go any further. I have read though various online sites that in order for xbox live to connect, the MTU setting on the router has to be higher than 1365. So.... my question is..... where is that setting on wmwifirouter and how do i change it.... or is there any other way to fix this problem?..... any help would be great!!!!!
I´ve got the same problem. Anyone with an answer?
I'm trying the same with my Wii but it not work with an ad-hoc network. I think that Wmwifirouter only offers this network type to sharing internet connection.
Sorry for posible errors in my english.
Shame this.
I thought it could route all network traffic but only appears to be basic.
You can get an old linksys router and install ddwrt then use the Router as a wifi repeater
If you get the version with more ram on it you can get the Fat version of DDwrt otherwise you will have to get the micro build.
It's able to route your network traffic to your wifi hub and is probably going to be more relyable as you can boost the signal output too.
I... tried to do this. and i won.
after MUCH time trying to get my 360live i finally did this...
Htc Mogul...wifirouter puttin out wifi...to my alienware laptop...eithernet cable to 360.
i thought thered be pretty bad lag... my stats prove otherwise
no problems here
I have a Touch Pro (Sprint) and I use Wifi Router regularly to connect to XBox live when not at home. It seems to work fine. I dont know about changing any settings or anything like that. I know this doesnt help you but just so you know that it has been done successfully without a hitch. No cables needed.
I have the Fuze and with WMWifirouter, DD-WRT installed on an old WRT54GL, a 12 cell rechargeable battery, some cables and a signal booster I was able to build a portable wifi station that can recharge and I usually get 9 hours of use from the router. Unfortunately the Fuze's battery usually dies within 4 hours of using WMWifirouter so it's kinda pointless but I can recharge it in the car. Maybe I could solder a USB port to the router just to charge. Anyways I use this with my Wii and PS3 and I rarely experince lag online
Hi Friends,
Hope you could help. I have a X1 and I been trying to get it connected to my DIR-655 thru wifi with no avail. Surprisingly, I have 2 wifi network at home and it could get connected to the other one. I am sure it is not a router issue as my iPhone could connect to it using same login settings. Both my wifi routers are on WPA2. This is really puzzling me.
Cheers and thanks,
I have trouble with WPA2 security as well. WEP works just fine, though.
Sfkn2 said:
I have trouble with WPA2 security as well. WEP works just fine, though.
Click to expand...
Click to collapse
But the thing is it is working with WPA2 with my other router. Very strange.
I have the same issue. Can't connect to my wi-fi router at home, though have no trouble to access others. Or better to say I get connected, but internet is working either too slow and too short, or not working at all.
I did have this issue when I gott my X1,
after a few days I unplugged the router for 2 mins and plugged back in, then waited until it started up and tried to connnect and it worked.
dont know why it worked it just did so maybe it will help you?
Have you tried logging on to your router, and allowing your X1's IP address.
Thats what i had to do on my netgear.
well, I've even arranged a static ip for the mac-adress of my x1, enabled DMZ for that ip, but still doesn't help.
I've pulled the plug of the router out many times so far, doesn't seem to help.
routers are basically rather small computers
their firmware have bugs
which is why the manufactures
put out firmware updates to fix those
newer wifi devices like phone of often give issues
with older routers with older firmware
updating firmware is pretty easy and can be downloaded from the manufactures site
yesterday I tried again and I don't why, but it is working now still a bit slow and some programs don't connect (QIP, SPb Online tv etc), but at least browsing works.
p.s. forgot about router firmware, gonna try it tomorrow.
I have a vodafone uk hd2 and have been really impressed with it as a product. I have not had any luck with the supplied wifi router software, I go through the minimal setup and press start and as far as the phone is concerned the router is up and running, the problem i have is that neither of my laptops can see the router.
Has anyone had any luck using it? Is it possible that vodafone have disabled it somehow?
Alternatively so i can manually add the router does anyone have the following details that would be setup automatically;
wep in use? is it 128 pass phrase or 40/128 key?
open system authentication or shared key?
im guessing the wep index would be 1?
Thanks
Search .. it was discussed 10 times already.
Thats as maybe but none of the several threads have a real answer as to why some people have it working and others dont. It also seems that the functionality can be effected by soft reset which isnt ideal at all. Also i havent been able to find any of the above original settings that i asked for in the threads hence the post.
Works for me
Hi,
works great for me - just have to make sure that you're not connected to WLAN with the HD2 when trying. Disabling WLAN, then starting WIFI-Router does the trick for me.
Good luck !
I am on vodafone and wifi router works perfectly for me. It worked when I had the stock 1.43 rom and it works with all the cooked roms I have used since.
i did notice it only works with 802.11g not with 802.11b devices like PSP or some other phones..
Is that really the case that it only works with 802.11g devices? Im fairly sure my netbook isnt new enough to have 802.11g and as such probably wont see the router. Has anyone found a way to get the router visible to 802.11b devices?
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Just to add on my previous post , I tried using WMWIFIRouter , also come back to same result ....
pagoda123 said:
Wonder if u have enable the N band function . I think Wi fi router will not work properly when it is enable. I did numerous testing with my laptop and iphone . When n band is enable on HD2 , Iphone can surf net thru HD2 but not the laptop . When n band is disable , device can connect no problem ..... So , to get wifi router to work , just have to stick with g band until someone can solve the issue .
Click to expand...
Click to collapse
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
N Works
bel_z_bub said:
The N band doesn't work anyway on the HD2.. better turn it off.. just because there's a parameter in the registry doesn't mean it works..
I have a N router at home and while it looks like it's doing N and it states "auto" instead of 54mbs, it still connects to the narrow band channel on the router..
Click to expand...
Click to collapse
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Any chance it's the computer you are trying to connect with? Tried with my work computer, but couldn't because our Dells have computer to computer(adhoc) connections locked out for security. Does the wifi router function show up as adhoc or access point?
zSpinner said:
N Works. I have a Linksys WRT320N router that can operate on N only, and the phone connects fine (at regular 2,4 ghz, the new 5 ghz doesn't work). Didn't speedtest.
I tried the standard sharing prog and wmwifi router (different versions) and can only, with a lot of effort, get my laptop on the net through the BT of my HD2. I have the N tweak on. Also did the trying in range of the router.
Click to expand...
Click to collapse
ok, now try and get N speed with only one antenna...
Ok Ive got a similar problem with the wifi router and vodafone
everything works hunky dory wifi router turns on, computer connects all is good only when i try and access a website i get a http error 403 forbidden message as if voda have restricted access i have no idea how this would be possible though.
Ive tried many site same result and many browsers chrome, safari, ie, firefox and opera
same thing
the strange part is that tweetdeck and skype work while the browsers don't
HHMMM
anyone else experienced this problem
As I'm on O2 I was quite keen to flash a new ROM to get the wifi router working as they did the dirty on us by ripping it out of the 1.43 they shipped it with...suffice to say that I'm not overly impressed with it after the couple of trials I've made using 1.66 ROM as the speeds its capable of generally fall short of what you get if you simply connect it via usb and use data sharing..bear in mind that I've only tried it twice so far and as such I may refine my opinion with further trials in different locations but as I was hoping to avoid repeatedly connecting leads to the usb socket it's a bit of a blow sooner or later, wear and tear will be an issue to think about.
my findings
had a play with the router, just to see and initially thought it wasn't working.it connected, but wouldn't pass any data.
25 minutes of my best network technician skillz later still no joy... that is until I remembered the laptop has a fixed ip and default dns server address set. as soon as I set them to automatic, bingo, fully working.
did a speed test from the laptop (mobilespeedtest.com) and got just under 900kbit over 3g. winner!
The connection only shows as 802.11b, but that's fast enough for the 3g connection so no worries.
the only down side is that it's adhoc, so the wifes n95 doesn't see it..but then again thats possibly a blessing In disguise!
EDIT as mentioned by the poster below, I had three connections present, (wap.o2.co.uk, mobile.o2.co.uk and paymonthly.o2.co.uk) and the router wouldn't work on them all, though I forget now which it would and which it wouldn't.
I never tried with 1.43 O2 ROM, but after flashing to 1.66 stock rom I just tried this.
For some reason I have 3 internet connection options:
1) Pay monthly contract
2) o2 active
3) mobile web
My standard connection is "mobile web" so I tried this first, and my laptop couldnt see the HD2 as a WIFI router. I then tried the "pay monthly contract" option and it worked straight away.
Now under my Notifications screen under O2 3G UK, I have two connections running, and the download speeds running the same as my home broadband due to the HSPA connectivity available through the phone.
Anyway, I just thought I would share this with anyone it may help.
i got my new omnia 7 today and i can't connect to my home wifi router. i tried to disable security, tried wep.....but it allways says "couldn't reach wifi network" or "password incorect". i tried to reset my router and my omnia 7, but nothing helped.
thanks in advance!
today, i connected just fine on one open ap, and one wep protected ap, but i still can't connect to my home wi fi ap. really confusing. my laptop and old htc prophet connects just fine, but my new omnia 7 won't. any advice?
thanks!
ok, so since no one tried to help me here, i tried every single thing on my router and it seems that the phone can't handle b+g standards, so i switched to g allone and now i'm able to connect. i hope this will help someone else too.
Nice tip
Hey man,i guess no one had the problem or didnt know what to do,anyway i had a differrent problem,when i was close to my router (no more than 8 meters) my phone connected normaly to the wifi,but once i was in my room which is further away from the router the phone wouldnt connect although it showed the wifi router signal had two bars,i tried your method in switching to g only and it worked ,now i connect to my wifi with no problem,thx for the tip ,hope they fix the issue in mango,cheers.
phobius87 said:
ok, so since no one tried to help me here, i tried every single thing on my router and it seems that the phone can't handle b+g standards, so i switched to g allone and now i'm able to connect. i hope this will help someone else too.
Click to expand...
Click to collapse
I have the same problem with my wifi router.
My phone is HTC 7 Throphy.
I have to reset my router every time my phone needs to connect to it.
My router is configured for DHCP.
I noticed that if there is a wireless device connected to my wifi network,
my phone gives that error and cannot connect.
If I try to connect to a wifi network which is secured with a password,
I always get 'Incorrect password' message.
I try reseting my phone with no effect.
I'm still looking for a solution.
Same prob here....
princegoro said:
Hey man,i guess no one had the problem or didnt know what to do,anyway i had a differrent problem,when i was close to my router (no more than 8 meters) my phone connected normaly to the wifi,but once i was in my room which is further away from the router the phone wouldnt connect although it showed the wifi router signal had two bars,i tried your method in switching to g only and it worked ,now i connect to my wifi with no problem,thx for the tip ,hope they fix the issue in mango,cheers.
Click to expand...
Click to collapse
no problem man.
it seems that there are many troubles with wifi on windows phone 7 and many users are complaining. i hope too that mango will fix most of those issues. mango will bring possibility to connect to hidden network.
for other users posting on this topic, i suggest that they try switching to g standard only, becose i too had this incorect password message allways poping up before the switching. it can be done in the router web configuration interface. u get in usualiy by typing 192.168.1.1 in your adress bar.
phobius87 said:
no problem man.
it seems that there are many troubles with wifi on windows phone 7 and many users are complaining. i hope too that mango will fix most of those issues. mango will bring possibility to connect to hidden network.
for other users posting on this topic, i suggest that they try switching to g standard only, becose i too had this incorect password message allways poping up before the switching. it can be done in the router web configuration interface. u get in usualiy by typing 192.168.1.1 in your adress bar.
Click to expand...
Click to collapse
My router is on g standart only but I still get that error.
well, if you know what you'r doing, you could try different configurations in your router. play with the settings and see if it will work, but again, only if you'r sure you won't screw up anything.
I found a fix.
In my router settings I changed the Chanel from 6 to 10.
I think the problem is that I have too many wireless devices in a small room.
you lucky bastards with wifi connectivity.. i have a pppoe account on my wifi and there is no way for me to connect to it whatsoever.
if you have access to your router settings, you can change briged to routed connection.
for some reason, i can't access router! i tried contacting my ISP, did not want to die waiting for an answer.
but i remember trying to do that before, and not knowing how.
Could you post a link with the instructions, zemljak?
you have a pm.
phobius87 said:
you have a pm.
Click to expand...
Click to collapse
i dont know if you are receiving my pm's, i dont see it them in sent.
I have this intermittent connection on a netgear wireless router too, its set to use dhcp, and only fix is a reboot of the router.
I think the phone is storing an ip (dhcp assigned) which when you reconnect to your wifi may have been re-assigned (ip lease) to a.n.other device in the meantime.
So, lets say on Monday I obtained 192.168.0.2
didnt access the wifi for a day or so
lease expires (router)
a.n.other device connects, e.g. iPad, obtained 192.168.0.2 via dhcp
then you try and use your wifi on your phone and it doesnt connect.....
so I think it might be storing the ip address, rather than checking for a new one each time it connects, or something similar.
Over a half year I had the same problem. But now I fixed it, by simply change the wlan-key, because in my old key I had letters like ä, ö, ü. That didn´t work. May be this works for you.
FIX!
tchimev said:
I found a fix.
In my router settings I changed the Chanel from 6 to 10.
I think the problem is that I have too many wireless devices in a small room.
Click to expand...
Click to collapse
I started having the same problem with the phone prompting me that i had the incorrect password. I changed the channel in my router and now my Surround is connecting without hessitation! Thanks!
Hi,
I have Nokia Lumia 800 with Windows Phone 7.5 and also have problems with my home wifi connection. Firstly I had an old pentagram router and couldn't to connect with it, I tried WPA, WPA 2, WEP, WPA 2 mixed or even no security, always had the same problem, shows "network don't respond".
The phone itself connects to other networks, but not my home network.
I thought that it was problem with my router (but every other device had no problems with conenction, ipad, galaxy s, laptops or even TV), so I took another router (techniklab) and I have the same problem.
On both routers in "active clients" I saw the phone when it was trying to connect, logs looks like:
Code:
Aug 20 22:13:31 wlan0: WPA2-AES PSK authentication in progress...
Aug 20 22:13:31 wlan0: A wireless client is associated - 50:2D:1D:E2:8A:87
Aug 20 22:13:31 wlan0: Open and authenticated
Aug 20 22:13:53 wlan0: A wireless client is disassociated - 50:2D:1D:E2:8A:87
Windows on my phone is up to date, router firmware also.
I can add that from couple of days I have Windows 8 (on PC) and it also cannot connect to my router, could it be some problems in new microsoft windows??
Any suggestions?