For now I have noticed these two problem on simple reboot:
- fast call number associations is resetted and only "1" on "answering service" is associated
- Optical joystick return enabled... and I don't want...
Other have same problems? Other problems?
Related
When I open Programs I always have an shortcut named: "Fun & Info".
I know it's a shortcut to the file: stk_uippc.exe
Is there any way to get rid of this icon? I don't mind that the file keeps existing in the Windows directory.
I tried delete the shortcut but it keeps coming back after a soft reset.
Think I've found it myself, but I wanted to share it with my fellow forum members
[HKEY_LOCAL_MACHINE\Services\STK_Service]
"Keep"=dword:00000001
Changed to:
"Keep"=dword:00000000
That's all!
Thanks for the info, but after changing it in the registry my phone starts up very slow than before. It takes about 2,5 times longer, about 4 minutes. (After I shut it down and switch it on again, or when using a soft reset)
If I change it back again in the registry to "1" (Decimal) my phone starts up at normal speed..... (about 1,5 minutes)
Is this normal, or am I doing something wrong?
On WM6 I've noticed that it doesn't change no matter what value I set in the regsitry.
I've tested it and it works perfect for me:
Just delete the complete "STK_Service" key. After this I soft reset my phone. Make sure you have removed the STK Shortcut of course
If you want to restore the key I suggest you export the key before deleting it!
Thanks for the fast reply. Just tried and it works.
Btw, do you know how to get Fring working with Orange world / proxy?
I can't get past the initial registration due to the message: internet connection is not available.
I can use IE and browse the internet with no problems.
Sorry if it's not the right topic to post the question.
Indeed a bit off topic.. ..try searching the forum
TIP:
www.google.com
SEARCH TERM site:http://forum.xda-developers.com
Works much better than the build in search.
mccune said:
On WM6 I've noticed that it doesn't change no matter what value I set in the regsitry.
I've tested it and it works perfect for me:
Just delete the complete "STK_Service" key. After this I soft reset my phone. Make sure you have removed the STK Shortcut of course
If you want to restore the key I suggest you export the key before deleting it!
Click to expand...
Click to collapse
haha thanx man! i was looking everywhere for this solution. I have a vodafone card and it keeps inserting a CytaVodaMENU in my start menu. deleting the registry value fixed my probs! thanx!
So I worked with others on this and have successfully come up with a solution to this problem.
Step one is to download the attached file and extract the files to your SD card.
Step 2 is to run your msvc1.6 .cab install.
After reboot run we run the extracted .cab files.
First run the Voice Command Apache Fix . cab install
then go into your button setup in control panel and set button 1 to start menu and the first button 5 to none.
Next run the LennySH VoiceCommand WM6 Fix .cab install
now soft reset.
Next you need to run the IDTransferV1[1].cab
After install it may ask you to soft reset... this is fine.
Almost there.
Now go into file explorer and find the IDtransfer icon in windows/startmenu/programs
copy that file and go to windows/startup and paste the program in there.
Soft reset one more time.
Now when your phone reboots it is almost ready.
You will have IDTransfer come up and u need to check Enable and click on hide. If you ever soft reset you will have to repeat this process to keep IDTransfer running in the background.
Now to go your control panel and click on phone and set your ring type to ring and ringtone silent.
next we go to the control panel again and select voice command.
under voice command select phone and options.
check Announce incoming calls
click ok to save and again ok to save
close out of the control panel
soft reset
when IDTransfter comes up select enable and click ok.
Now go into your BT pairing and remove your existing BT device and then re-add it.
After that you should be in working order and the voice dial and call announce works fine.
What exactly does this fix?
When you say fixed, what exactly are you fixing? What is broken in my view is that when I place a call by bluetooth, the "voice in my head" (AKA my bluetooth earpiece) repeats my request back, it might even ask for more details, (i.e. "work", "home", "mobile" etc.) and I say "Yes" at which point the earpiece goes deaf. And when it can't hear my response it shuts off. Are you saying this fix, fixs this?
finally you got it working
thank you so much it only took me 4 hours to find this
but everything works like it should
Voice Command Fix
I tried this and followed directions exactly, but when I got to the following step "Settings" freezes and I'm not able to configure Voice Command causing me to have to soft reset and am not able to complete the steps.
"next we go to the control panel again and select voice command.
under voice command select phone and options.
check Announce incoming calls
click ok to save and again ok to save
close out of the control panel"
I have some problems with the Ms Voice Command:
I had installed two of the CABs of this program, which I found here in one of the threads:
"Microsoft.Voice.Command.v1.6.21725.cab"
"MSVC-1.0 Control.cab" (for setting the "TFlo3d Phone key" to the "Voice Command Button").
I also set to "Set rate to 1 Slower" and "Increase the volume to 5"
The problems:
1. The play-back/response of the program is very fast and usually can't be understood.
2. When I'm Trying to call by saying a phone number (e.g. "Dial 04-818-2905"), the program don't understand my command numbers and repeats a wrong number.
3. I lost hope and I'm trying to remove the program, but I'm getting an announcement that the program can't be fully uninstalled. Practically the program isn't removed. I made a few reboots, I made reinstall, I set the "TFlo3d Phone key" back to "phone" (it's still functioning as a "Voice Command Button").
Can someone help me with one or some of those problems? especially with removing the program, before I'll need no make a full-reset.
I have some problems with the Ms Voice Command:
I had installed two of the CABs of this program, which I had found here in one of the threads:
"Microsoft.Voice.Command.v1.6.21725.cab"
"MSVC-1.0 Control.cab" (for setting the "TFlo3d Phone key" to the "Voice Command Button").
I also set to "Set rate to 1 Slower" and "Increase the volume to 5"
The problems:
1. The play-back/response of the program is very fast and usually can't be understood.
2. When I'm Trying to call by saying a phone number (e.g. "Dial 04-818-2905"), the program doesn't understand my command numbers and repeats a wrong number.
3. I lost my hope and I'm trying to remove the program, but I'm getting an announcement that the program can't be fully uninstalled. Practically the program isn't removed. I made a few reboots, I made reinstall, I set the "TFlo3d Phone key" back to "phone" (it's still functioning as a "Voice Command Button").
Can someone help me with one or some of those problems? especially with removing the program, before I'll need no make a full-reset.
hello
1. where's the option to automaticly lock phone when "end call" button is pressed? I saw it somewhere but now I cannot find it...
2. is there a way to disable 3G connections? standard battery will last longer problably if this would be done.
3. finally, how to disable automatic keyboard open when cursor is places on a text field (like when entering new message composing)? I tried adding "TurnOffAutoDeploy" 1 string in this registry location -> HKEY_CURRENT_USER\ControlPanel\Sip but that didnt worked.