MS Voice Command problems! - HD2 General

I have some problems with the Ms Voice Command:
I had installed two of the CABs of this program, which I had found here in one of the threads:
"Microsoft.Voice.Command.v1.6.21725.cab"
"MSVC-1.0 Control.cab" (for setting the "TFlo3d Phone key" to the "Voice Command Button").
I also set to "Set rate to 1 Slower" and "Increase the volume to 5"
The problems:
1. The play-back/response of the program is very fast and usually can't be understood.
2. When I'm Trying to call by saying a phone number (e.g. "Dial 04-818-2905"), the program doesn't understand my command numbers and repeats a wrong number.
3. I lost my hope and I'm trying to remove the program, but I'm getting an announcement that the program can't be fully uninstalled. Practically the program isn't removed. I made a few reboots, I made reinstall, I set the "TFlo3d Phone key" back to "phone" (it's still functioning as a "Voice Command Button").
Can someone help me with one or some of those problems? especially with removing the program, before I'll need no make a full-reset.

Related

Cyberon voice command shortcut on your screen

Hi mates, actualy i found this:
-Cyberon voice command use the record button to start, but you can do another trick:
1-Install the latest spb pocket plus
2-Choose one of the tabs (lets say MAIN) and click add items
3-Choose custom and at the botton left click add/file and then browse the windows folder and choose "sddialer.exe"
4-Now you can start cyveron voice command from your selected tab on the touch screen.
All we need now is some one that can find a way to point the "head set button" to this new short cut.

Uninstall MS Voice Command & back to Voice Speed Dial - how to?

OK I tried MS Voice Command, didn't like it & decide to get back to the old good Voice Speed Dial...
Unfortunately when i press a button on my BT headset it only brings up phone application - there's no possibility to use voice dialling
I tired to replace the registry string "HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand" with a sddaemon.exe and then with sddialer.exe - just for sure, but this solution didn't work
Can anyone check its own Wizard and come up with any solution?
I would appreciate pasting the actual correct registry keys from Voice Command section. Do I nedd to create a key called path or should I just place everything under default value? (I've already tried both....)
mikolajek said:
OK I tried MS Voice Command, didn't like it & decide to get back to the old good Voice Speed Dial...
Unfortunately when i press a button on my BT headset it only brings up phone application - there's no possibility to use voice dialling
I tired to replace the registry string "HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand" with a sddaemon.exe and then with sddialer.exe - just for sure, but this solution didn't work
Can anyone check its own Wizard and come up with any solution?
I would appreciate pasting the actual correct registry keys from Voice Command section. Do I nedd to create a key called path or should I just place everything under default value? (I've already tried both....)
Click to expand...
Click to collapse
Try the cab in this thread... I created the cab and tested it on my wizard...VC 1.6 works flawlessly for me... Good luck
http://forum.xda-developers.com/showthread.php?t=283412&page=5
Thanks, but it didnt' work
I installed the cab and then changed the file in the path for the original voice command. But pushing the button still brings up the phone... :|

voice command bt initiation

soooo is anyone working on this for the hw6900? or are we waiting for the update from microsoft?
I would love lend a hand to anyone willing to try, but unfortuantely my technical know how is not as high as my enthusiasm...
even in the mS Mobile page says, the voice commands does not works with the Ipaq, is an issue with the buetooth stack, I know some people change it and has a different stack, but...after a while they go back, because has more issues than solutions, sorry.
folow next step:
1. copy shortcut voicecmd.exe from \program files\voice command to \windows\start menu\programs.
2. open buttons (start\setings)
3. Assign a program to button 1 (press-n-hold) assign voicecmd (not assign voice command)
This procedure work 100% microsoft voice command 1.6 my 6915
spgi said:
folow next step:
1. copy shortcut voicecmd.exe from \program files\voice command to \windows\start menu\programs.
2. open buttons (start\setings)
3. Assign a program to button 1 (press-n-hold) assign voicecmd (not assign voice command)
This procedure work 100% microsoft voice command 1.6 my 6915
Click to expand...
Click to collapse
This is how the program is ment to be used, but what we are trying to accomplish is starting the program (or voice prompt) via pressing the button on our bt headset.
anyone working on this?
TRY THIS ONE
http://forum.xda-developers.com/showpost.php?p=1282191&postcount=28

The real fix for MS Voice Command and Wm6 rom

So I worked with others on this and have successfully come up with a solution to this problem.
Step one is to download the attached file and extract the files to your SD card.
Step 2 is to run your msvc1.6 .cab install.
After reboot run we run the extracted .cab files.
First run the Voice Command Apache Fix . cab install
then go into your button setup in control panel and set button 1 to start menu and the first button 5 to none.
Next run the LennySH VoiceCommand WM6 Fix .cab install
now soft reset.
Next you need to run the IDTransferV1[1].cab
After install it may ask you to soft reset... this is fine.
Almost there.
Now go into file explorer and find the IDtransfer icon in windows/startmenu/programs
copy that file and go to windows/startup and paste the program in there.
Soft reset one more time.
Now when your phone reboots it is almost ready.
You will have IDTransfer come up and u need to check Enable and click on hide. If you ever soft reset you will have to repeat this process to keep IDTransfer running in the background.
Now to go your control panel and click on phone and set your ring type to ring and ringtone silent.
next we go to the control panel again and select voice command.
under voice command select phone and options.
check Announce incoming calls
click ok to save and again ok to save
close out of the control panel
soft reset
when IDTransfter comes up select enable and click ok.
Now go into your BT pairing and remove your existing BT device and then re-add it.
After that you should be in working order and the voice dial and call announce works fine.
What exactly does this fix?
When you say fixed, what exactly are you fixing? What is broken in my view is that when I place a call by bluetooth, the "voice in my head" (AKA my bluetooth earpiece) repeats my request back, it might even ask for more details, (i.e. "work", "home", "mobile" etc.) and I say "Yes" at which point the earpiece goes deaf. And when it can't hear my response it shuts off. Are you saying this fix, fixs this?
finally you got it working
thank you so much it only took me 4 hours to find this
but everything works like it should
Voice Command Fix
I tried this and followed directions exactly, but when I got to the following step "Settings" freezes and I'm not able to configure Voice Command causing me to have to soft reset and am not able to complete the steps.
"next we go to the control panel again and select voice command.
under voice command select phone and options.
check Announce incoming calls
click ok to save and again ok to save
close out of the control panel"

a

I have some problems with the Ms Voice Command:
I had installed two of the CABs of this program, which I found here in one of the threads:
"Microsoft.Voice.Command.v1.6.21725.cab"
"MSVC-1.0 Control.cab" (for setting the "TFlo3d Phone key" to the "Voice Command Button").
I also set to "Set rate to 1 Slower" and "Increase the volume to 5"
The problems:
1. The play-back/response of the program is very fast and usually can't be understood.
2. When I'm Trying to call by saying a phone number (e.g. "Dial 04-818-2905"), the program don't understand my command numbers and repeats a wrong number.
3. I lost hope and I'm trying to remove the program, but I'm getting an announcement that the program can't be fully uninstalled. Practically the program isn't removed. I made a few reboots, I made reinstall, I set the "TFlo3d Phone key" back to "phone" (it's still functioning as a "Voice Command Button").
Can someone help me with one or some of those problems? especially with removing the program, before I'll need no make a full-reset.

Categories

Resources