Hi bros and sis,
i recently install CE star into my treo pro, after installation i realised that all the buttons are not reponding when i try to use (qwerty keyboard, directional button, side and top button) all not responding. i unistall the software and try again but all the buttons still not responding..i try a few soft reset and the result is the same.. any one here able to offer helps??
Regards
you might install the wrong version. There are two versions: one for palm; one for non-palm.
darren25 said:
Hi bros and sis,
i recently install CE star into my treo pro, after installation i realised that all the buttons are not reponding when i try to use (qwerty keyboard, directional button, side and top button) all not responding. i unistall the software and try again but all the buttons still not responding..i try a few soft reset and the result is the same.. any one here able to offer helps??
Regards
Click to expand...
Click to collapse
I'm using CeStar for my treo pro and everything is fine. I've installed it to the storage card. You've to enable it after install by running it from the start menu and do a soft reset after that. It worked for me.
Related
Hi everyone,
I'd like to remap my directional pad in the Today screen to stuff like Calendar, Mail, etc...
I tried VITO Buttonmapper but that didn't have an option for the directional pad, and I tried buttonMax, but that messed up my device and I had to do a hard reset (I submitted it to wm5fixsite right away...), tried AE Button Plus but that doesn't have direction pad controls either...
Anyone have any other software or options that might work ?
Thanks !
I think ButtonMax was the only one I ever saw to remap the directional pad.
V
ButtonMax does work on the JasJar as I have it on mine and it works fine. You can map Apps or functions to the direction pad. Works well from the today screen.
which version of buttonmax did you install ? cuz it really messed up my Jasjar... half of the buttons on the keyboard and the touchscreen stopped working...
ButtonMax doesn't work yet - Required Hard reset
Just for fun I just tried loading ButtonMax 2.1 to see if I could at least use it for the direction pad mapping. Wow ... it totally messed up all the keys and even the touch screen would not respond to taps. I'm going to now give tom_hiro255's PQz (http://forum.xda-developers.com/vie...tdays=0&postorder=asc&highlight=map&start=100) or http://www.nicque.com/PQz.
This also gave me a chance to see if the SpriteBackup beta will actually work to restore my JasJar. The automatic exe doesn't work yet, so I had to re-connect and reload Spritebackup to get it to restore.
Read http://forum.xda-developers.com/showthread.php?p=1591870
Hi! I have a HTC TyTn and I have a trouble with the possibility to reassign the functions to the hardware buttons START and OK in the front of the device in the D-Pad. Infact, In my previous device, a Qtek S200, I was to be able to assign a different shortcut (for example, in replacement of the OK button, I put the wisbar lite task manager link).
I have also tried AE Button Plus, but che Start and OK remains hold on.
Is there anyway to activate this possibility?
Thanks in advance!
Bye
Stefano
Sorry.... Is there a solution? anyone?
Thanks
Stefano
I'm also interested in this. Is there any way to reassign the functions of the "start" (windows) and "ok" buttons to the left and right of the d-pad on the hermes?
AE Button plus, but I have found it twitchy on the TyTN. If you only map those two buttons, you should experience little trouble though.
Hi Guys,
Has anyone developed an app like Key Swop for the Kaiser that works for the HTC Touch Pro.
I would really like to change my left soft key to open my iContact app.
Regards
Rich
key swap should work on the touch pro, too. did you try it?
Yes, but it would change the soft key. However when booting up the handset, (when it shows the HTC logo) it does show the iContact text, and you can click on it and launch the app, but when it has finished booting, it goes back to showing "Phone".
Can someone verify this to make sure it is not handset specific.
Regards
Rich
ive been using SoftKeyManager lately since DCD's latest ROMs arent compatible with key swop. you could give it a shot
Sorry but have just tried the Softkey manager app and it wont change the soft keys on the Touch Pro
regards
Rich
Try This
You can download it from here.
http://www.freewarepocketpc.net/get-keyswop.html
Jimllfixit said:
Hi Guys,
Has anyone developed an app like Key Swop for the Kaiser that works for the HTC Touch Pro.
I would really like to change my left soft key to open my iContact app.
Regards
Rich
Click to expand...
Click to collapse
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
iv got version 3.5 aswel, iv had no problems with it
the only problem i have is that, in landscape mode the key sizes dont increase, it appears small, but never the less a great keyboard
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
gt112 said:
Hi xdaman85
Try running Remote Desktop and see if the keyboard behaves there, thats where it dies on me.
Click to expand...
Click to collapse
just tried that, no problem what so ever
try this
uninstall, soft reset, install, soft reset, then go to settings, inputs, choose touchpal as default keyboard, then press ok, then soft reset
i know thats long but it should do the trick, seems to me as if that it wasnt installed correctly and theres some errors, so try what i said and let me know if it works
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
gt112 said:
OK guys, it seems I am not alone in having prolems with TouchPal on the HD. See this thread on CoolTek's forum.
http://www.cootek.com/forum/forum_posts.asp?TID=742&PN=1
I have tried everything, I have uninstalled the kb, reinstalled it. Last night I completely reinstalled the entire phone (hard reset, wipe, reistall) but TouchPal still stops working after a while.
Click to expand...
Click to collapse
just the thread, i guess your right, your not alone...but..its still wierd as iv been using touchpal since last wednesday and its still working fine for me
could it be that touchpal is conflicting with another keyboard on the device?
Have you gone to settings/inputs and selected touchpal as the keyboard?
I cant think of any other ideas because its working perfectly for me
Thanks xdaman
Just done a new re-install and it seems ok now. TBH I am now using the version from Cooltek so I may have had myself to blame.
On another note, I am having probs setting custom commands, I have the followig questions, can anyone offer any wisdom ?
You can setup custom commands such as Ctrl+z etc. They can be stored in place holders accessed by tab+downslide on the Control Tab button (the one with the 4 arrows). The instructions for creating custom command scan be found in the manual (section 4.2) here
Here are my questions
1. How do you create a combination command? e.g. They have a built in command called "Select All && Copy". This is 2 commands. How do you create this ?
2. After I mess up all my command buttons. How do I reset them to their defaults ?
3. When I create a command, Is Flag5 the ASCII key code? The manual is not specific on this. Also, if Flag5 is the ASCII code, why do I need to then enter the Alphabet index of the letter ?
4. I only seem to be able to edit the top Custom command button. If I try and assign values to the lower buttons, the edit appears in the top button. Is this a bug ?
cant install/wont install
downloaded the cab file..after it ran..it looks like explorer window pops up and tried to o something..anyway it says the page cant be found..tried loading in both card and local and get the same response..it does tell me the it was unsuccessful in loading
i gues its the lastest becuase i downloaded from the site
gt112 said:
Hi folks
I love this forum and am so glad its here, it seems to be the only place where ppl can get support for the HD right now.
I am using the TouchPal keyboard 3.5. It installed fine and I started using it and configuring it grand etc. But after a while it stops responding.
If I click on the small keyoard icon at the bottom of my screen, no keyboard pops up whatsoever. If I go to settings and change the default keyboard from TouchPal to say - Full Querty and press OK, the change does not take place (If I go back into settings, the keyboard is reset to TouchPal).
So I am left wthout a keyboard and I have to do a full restart of the phone. If I uninstall TouchPal all is well and the keyboard system reverts back to working normally.
Has anyone else expereinced similar ?
Many thanks for any help
gt
Click to expand...
Click to collapse
Hi, I am looking for a small program to soft reset my diamond, instead of pounch the hole with my stylus. Any suggestion?
Thanks
check tihs out. its mapped ti the power off key. just install the cab then hold down power button.
I've used this for years, and works on the diamond.
http://freewareppc.com/utilities/softresetforpocketpc.shtml