Hello people,
I have a bit of a problem with my sms sound on my HD. I dont get any sound notifications when a new SMS comes. I have enable sound, under settings, sound and notifications i have checked Play Sound and selected a builtin one. Vibration is off. Any ideas of what maybe the problem?
Thank you in advance.
ck Settings>Sounds&Notifications>Sounds and see if the Notifications box is ck'd or unck'd.
re
same situation here. settings cant change. very strange. i change option, but after close dialg windows, and reopen it, nothing change
i have exactly the opposite problem, i want to disable the SENT notification sound!
I confirm the problem about changing ring tones about call, sms etc ... very very strange ! I open dialg window, change ring tone from the list, but it cannot be played or assigned. I have not install odd 3rd party apps. except offcial HTC fix from here
http://www.htc.com/www/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
please help !!!
Solved?
Check once again step by step Your settings - it helped in my case - they often weirdly switching off for no good reason...
re
I am going to open new topic about general tones problem
same problem
moukis said:
Hello people,
I have a bit of a problem with my sms sound on my HD. I dont get any sound notifications when a new SMS comes. I have enable sound, under settings, sound and notifications i have checked Play Sound and selected a builtin one. Vibration is off. Any ideas of what maybe the problem?
Thank you in advance.
Click to expand...
Click to collapse
I have the same problem. it used to work, but now no sound, the vibration still happens though!!! settings look ok, and soft reset does not help.
Any ideas?
solved
Hey guys,
as it turned out the Ring sound level is only for the ringing tone. I had ring level on maximun while system level was off. I raised the system volume and the sms sound was back on. I dont know if this applies to the rest of you but give it a shot. Thanks for your replies.
Related
It seems that u can use any MP3, wav etc. files as your ringtone. But if you set your ringtone to vibrate and ring, the audio will play well but the vibrate mode will continue vibrating until the audio finish, and this is kinda annoying.
Is there any software that could edit this ringtone and vibration mode?
I know that nokia ringtones has the ability to control the vibrate pattern with their .nrg files, but i don't think it's supported with PPC and you can't get the .nrg editor. They keep it close to themselves.
Do let me know if there's any such s/ware or any of u guys who could develop it...
Thxs
Anyone have an answer to this? I know that this post is old but perhaps there is still no clear answer (yes I have done the search thing but nothing came out) so I am having the same problem, anyone out there who could shed light into this? It would be also be beneficial if someone could tell me if there is a way to make the long custom sms stop when I have already acknowledged the alert? it is kinda annoying specially if you forget to set to silent on a meeting, it still plays even if I have already touched the phone and tried to switch it off. please help? thanks.
i am searching for this function too. vibrate and sound at the same time. every profile-manager i have seen can make only vibrate or sound. or first sound an then vibrate.
This Software can make it:
http://www.spbsoftwarehouse.com/products/phonesuite/screenshots.html
(Profil: loud)
but i need only a software for profiles not for contacts and so on.
Hey everyone,
Had a question,
My phone, when on vibrate, does a good 10seconds for any text message, phone call, or what not - any ideas how to edit this - it's WAYY to long of a vibration and I end up needing to have the phone on silent.
Thanks,
~Maciek
if you have a 3prt profile app chack if there are settings regarding this issue ,you can also try diff ring and ring settings of the phone ,most likely you have a software that dose it ,try also to check on start/settings/sound & notification /notification if the settings are ok (play with it) as last option you can always backup your device prform hr and check this function (to know your device is ok) good luck with finding it
maciekl said:
Hey everyone,
Had a question,
My phone, when on vibrate, does a good 10seconds for any text message, phone call, or what not - any ideas how to edit this - it's WAYY to long of a vibration and I end up needing to have the phone on silent.
Thanks,
~Maciek
Click to expand...
Click to collapse
Yeah i find the vibrations to be way too long also. I wish there was a way to change it.
Guys, here is my question... My Titan blinks the yellow flashing light when there is a missed call, but has no sound. I went in to sounds and added a sound, which is makes when the missed call comes up on the display. However, it never beeps again. I have time when I am in loud areas or don't have my phone on me, and won't notice a missed call until a few hours later. Is there a way to make a beep sound of some kind for a missed call every few minutes? I am using Reloaded 4 ROM. Thanks!
Anyone? Help!
start-settings-sounds¬ifications-notifications
I imagine this is in the manual.
drewcam888 said:
start-settings-sounds¬ifications-notifications
I imagine this is in the manual.
Click to expand...
Click to collapse
Tried that, as posted above, but the repeat check box is grayed out and I cannot put a check in it, no matter what sound I pick. As for the manual, its kinda pointless with a homemade ROM installed.
Well my dcd rom has that option so I guess yours is messed up or you have programs or settings not allowing you to change it.
Go to settings/sounds and notifications
make sure the events (warnings, system sounds) is checked otherwise the repeat as you found out will be grayed out. I tried this and it does gray out when unchecked...
There must be an issue with the Reloaded ROM that I have. I can check and uncheck the events check box, and go into where you set the missed calls sound, but the repeat check box is still grayed out. I guess I may have to see if I can find a tweak to fix it.
Found the registry change to fix this... http://www.pdaphonehome.com/forums/546050-post18.html
Thanks guys.
Delete..........
The reg hack works.... But after I "dismiss" the notification it still keeps notifying me.
fish2222 said:
Found the registry change to fix this... http://www.pdaphonehome.com/forums/546050-post18.html
Thanks guys.
Click to expand...
Click to collapse
I had the diamond and the HTC Pro2 before and whenever I got a ring that I don't want, I just press on one of the volume buttons and it will mute the ring, but in the HD2, I remember it was working at the begininning but after some installation or tweak I lost it and even the mute ring button on screen is not working any more, does anybody know how to fix this. Thanks
medman said:
I had the diamond and the HTC Pro2 before and whenever I got a ring that I don't want, I just press on one of the volume buttons and it will mute the ring, but in the HD2, I remember it was working at the begininning but after some installation or tweak I lost it and even the mute ring button on screen is not working any more, does anybody know how to fix this. Thanks
Click to expand...
Click to collapse
Both actions should mute the ring. Try the third option. Flip over the phone to face it down. It also mutes.
I also have this issue but on text messages.. I have a song as the ringer for a text.. the ringer wont stop unless i actually open the message that was received. =(
If i get one txt after another, both songs overlap
txlatino1983 said:
I also have this issue but on text messages.. I have a song as the ringer for a text.. the ringer wont stop unless i actually open the message that was received. =(
If i get one txt after another, both songs overlap
Click to expand...
Click to collapse
Any help??
txlatino1983 said:
Any help??
Click to expand...
Click to collapse
nope, it does that for everyone. Use a shorter sound?
samsamuel said:
nope, it does that for everyone. Use a shorter sound?
Click to expand...
Click to collapse
Thanks for reply.. However, to those considering using a shorter sound as an sms. if the mp3 sound is to short or file size to small, the phone wont pick it up, it wont even appear as an option to use as a ringer.
in that case use wma or wav files. the alarms that come built in are around 50k wma files.
Another observation was that if you fo to Setting> All Setting> Sound & Notifications.. Notifications tab, Select Incoming Message, and select Display Message on Screen.. Then the ringtone will only sound for 3-5 secons...
Just FYI..
Hello, I'm trying to find a setting to disable watch vibration while receiving notifications so that only notification sound would be played. For some reason disabing vibration under sound settings does not do the trick. Any thoughts is that even possible ?
Thanks !
I have same prob did ya get an answer