edit: /me thinks i need to search the forum before posting and stop being such a noob!
lol so its the voda rom i have, damn il need to unbrand
yus
try to assing your "wifi" network as your "default" network connection
settings -> connections tab
PS: it uses obsolete names such as "my work network"...
but you can configure WiFi as "internet" and set it as "default"
Related
Anybody know some application that can configure proxy (use ou not) in each connection?
I use proxy for GSM data connection to work remotly (work network), but when connect by WiFi or GPRS I don't use proxy and have to enter configuration connections to disable...
Can I assign proxy settings to each connection?
Thanks
i had the same problem as well, do a search for proxy and you'll find it, also go to start>help and search proxy and it will tell you there.
fone_fanatic said:
i had the same problem as well, do a search for proxy and you'll find it, also go to start>help and search proxy and it will tell you there.
Click to expand...
Click to collapse
But, do you know any software that can do it???
I know configure proxy any time but i want an app that can do it for me (in each connection)!
Thanks
Change which network each connection uses (ie work, internet - make more of your own) then each one can have different proxy settings.
Beeble said:
Change which network each connection uses (ie work, internet - make more of your own) then each one can have different proxy settings.
Click to expand...
Click to collapse
Hello,
But at WiFi connection I can't, because there is not any modem config.!
Anyone?
Thanks
arp said:
Beeble said:
Change which network each connection uses (ie work, internet - make more of your own) then each one can have different proxy settings.
Click to expand...
Click to collapse
Hello,
But at WiFi connection I can't, because there is not any modem config.!
Anyone?
Thanks
Click to expand...
Click to collapse
Settings, connections, connections, advanced, select network, NEW "make profile for WIFI use eg wifi"
Settings, connections, network cards, select AP, "connects to" wifi
steeings, connections, connections, tasks - edit porxy for "wifi"
Hope it helps
Ok, this thread is a little old, but it is close to what I am looking at.
I just got my bill from O2 and I have been charged £1.50 for "GPRS data" although I think it is actually MMS messages being sent or received by GPRS. I am guessing this is because it is set up incorrectly by me.
I did have it set to collect MMS over the "mobile.o2.co.uk" settings (as opposed to the "wap.o2.co.uk" settings) and wifi could be enabled, but if I tried to use the browser without enabling wifi it automatically dialled the GPRS connection.
Could someone give me an idea on how to set it so that
A) MMS messages only count as MMS messages and are sent and received by GPRS.
B) WiFi is the preferred connection for everything else.
C) GPRS is available if WiFi is not available (and preferably after getting confirmation from the user), ie I dont have to find the settings and re-enter them.
I realise this is probably not possible, but any help and/or pointers are appreciated.
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
egg said:
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
Click to expand...
Click to collapse
maybe i'm to simple, but i only use Internet settings and don't use @work @all.
And it works fine everywhere, @home, @work, via GPRS and via WiFi. Have you tried this?
and why would you put your gprs setting under Work?
Extremely sorry no one has replied to your post with a solution yet, I maybe too late but I only joined this forum yesterday.
You want multiple Network settings with independent Proxy settings and IP, DNS etc right??
Go to Start>Settings>Connections>Tap connections >go to the "Advanced" Tab. Tap "Select Networks" Here you are given 2 Choices of Network settings you can use. Work Network and Internet (or ISP). You have your work settings saved on Work network so do not edit that. choose the other one and edit it to enter all your GPRS settings. and save as your gprs connection. Now if you want to add a third independent setting, from the select Networks tab, click on new and you can create a third Set of connection settings (for your home maybe). Your PPC can handle 2 simultaneous connection settings perfectly, ex. 1 for Pass through and 2 for GPRS. But each time you want to connect to a third or different setting, you just go to the "Advanced Tab"> select Networks> tap the pull down options menu and select the other connection set that you would like to use et voila it is that simple.
hi there,
I edited my isp setting as O2 GRPS. I cannot use XDA with Activesynce and pc to get on the internet.
I think I must creat the my isp setting again. Anyone can share your "My ISP" setting with me?
MAny thanks!!!
use search
pick networking it forum
search for
"o2 AND gprs"
you'll find the settings in no time
Rudegar said:
use search
pick networking it forum
search for
"o2 AND gprs"
you'll find the settings in no time
Click to expand...
Click to collapse
Thanks for your remind.
I have sent the O2 GRPS sucessfuly, but I lost the setting of "MY ISP", which make me cannot got online by activesyne and PC.
I need the setting of My ISP, which i could not find in past messages.
grps settings == my isp settings
you pretty much just need the
access point name
and depending on the network username and password
those are typed out in many many many posts if you do the search
i said
I'm sorry to bring this up again folks, I have read and searched forum for similar threads but am still confused.
I find the WM6.1 network connections interface very confusing. Can anyone tell me step by step how to setup vodafone?
Should it be setup as part of "My Work Network" or as its own "Vodafone Live" ?
When I set it up, I still want my phone to use my WiFi connection at home as default, and only use vodafone live if I specifically tell it to. Is this possible ?
Under Netwotk Management
Surely "programs that auto connect to the internet" and "programs that auto connect to a private network" would be one and the same no ? What about when we use our private network to connect to the internet (via router etc) ??
as I say, I find the entire windows mobile networking system a mess, very confusing and have never gotten vodafone live working properly.
btw, my phone is HTC Touch HD
Many thanks for any desperately needed help
Update...
If I setup the phone to use just "My Work Network" under both "programs that auto connect to the internet" and under "programs that auto connect to a private network"....
and then manually setup vodafone under the "My Work Network" device as follows...(using my local vodafone settings)
1. add new modem connection
2. name it (vodafone etc)
3. select modem to cellular line (gprs, 3g)
4. enter apn "live.vodafone.com"
5. username and password - "vodafone"
6. under "My Work Network" setup proxy as 10.24.59.100
7. under advanced set socks to 10.24.59.100:1080
Then it works. I can disable wifi, enable data connection and browse the internet.
THE PROBLEM here, is that if I go into college, and use my phone over their wifi, the proxy server gets changed thus disabling vodafone all over again.
So, it works if you set it up manually under the "My Work Network" device. But I need it set it up as a seperate device so that the proxy doesnt get messed up. I have tried editing the auto created "vodafone live" device, it just wont work. I tried editing the "my isp" device but that has no proxy setting.
Can anyone please help me make any frickin sense of this. ?
Hi everyone,
im a newbie with WM (formally Symbian) and i have a question regarding setting my wifi as a defaut connection whether checking email, browse internet, update my weather...and the etc. is there a way of setting it? everytime i try to update my weather or any internet connection it keep trying to connect to the phone data connection which i did disable and ofcourse it tell me there's a problem with connection.
Any help would be appreciated
Drew
settings menu all settings connections connections advanced select networks top dropdown select "the internet" or maybe my work network(I forget what it says).you'll get it when you see
Works perfect - thanks bunch!
Question: Can I somehow setup my device that after I click to update MyWeather automatically connects to WiFi vs clicking ToggleWiFi button?
sorry, no clue.like auto on wifi. should think so if you look hard enough.