I have heard about this Forum and the better things it does.
please can somebody help me uoploading my MDA Touch?
I have allready done this:
-download "touch essential V3.5 Manilla
- I tried unsuccessfully to save the unpack software trough AVS upload in the Phone.
-Please tell me what should i do?
Should also download the ZIP- Document?
thank u
Lepape
Related
please advice!
Atom Hiddenpartition
Let me give you what you need. You have been very persistent
follow this link. http://forum.xda-developers.com/attachment.php?attachmentid=28395&d=1149224627
If it does not work go to this page and scroll down to the 4th post. It was posted by Kropotov
http://forum.xda-developers.com/showthread.php?t=267305
Copy to your device and run. Soft reset and when you go into files on your device, you should see the conrents of the extrom revealed, asuming it works like on the Atom. Good luck
Cheers
Victor
hi and 10x for the replay.
well it didnt work.
i want to extract the answering machine...
What is the software list in O2 AutoInstall?
1) O2 plus
2) O2 phone plus
please help me to unhide the ext rom i want to take out the answering machine
i tried atom_hiddenpartition_614.cab on my atom exec and it worked
could u pls try it and copy and share the answering machine cab file??
thx
In the TotalCommander write \apkdjlowhjusqsmd
But there is nothing interesting...
Hello.
After hours and hours looking for a pretty cube effect for my Trinity, I don't found a solution.
I have a Faman Spanish 4.02 (WM6), it runs ok. I downloaded differents .cab for TouchFlo and the Cube, but don't work. I think I'm a little lost in what I must do.
Somebody can help me? Please, link to any post wich really explain how to install cube-effect or put the link to applications here, I'm lost with the different versions
Thanks a lot!!!
Hello again. I'm still looking for the cube.
I read that i need to install TouchFlo, and I have tried with FTouchFlo. I do softreset and... nothing. After it, I read that I need to install Flash Cube too, because it's said that is faster than the original one but... There is a lot of posts where is used but I don't find how to install it.
Finally I just found HTC TouchFLO Cube Ctrl at http://forum.xda-developers.com/showthread.php?t=343583 but i don't know if it is what I want. I'm going to try it..
The instructions of HTC TouchFlo Cube Ctrl says:
1. You need to already have the HTC TouchFLO cube software installed
and operating on your device. This includes the apps:
ApLauncher.exe, QuickDial.exe, MediaHubMini.exe, and Biotouch.exe
2. You need to have FTouchFlo installed and working on your device.
I tested with the latest version v1.4.1
I don't find the archives of the point one, so I looked the interventios of FAMAN and I found the FTouchFloCubeESv3.cab that I'm going to try a this moment. Any other idea?
Bah, I desist.
No way, I can't do work the cube. In addition, I downloaded FTouchFloCubeESv3.cab from a external page and it changed my Trinity password (I flashed again and ok). The password change don't happens with the file linked in the xda-forums, I checked it. If somebody can do a little howto, step by step, I'll try it again...
Thanks in anyway.
I'm lucky. Just when I went to uninstall... Surprise! It Works!
Mini How-to:
Download Faman's FTouchFloCubeESv3.cab only from xda-forums (external links may block your Trinity): http://forum.xda-developers.com/showpost.php?p=1694816&postcount=126 and install it. With this, you completed step 1 of the of HTC TouchFlo Cube.
Install FTouchFLO from http://forum.xda-developers.com/showthread.php?t=338143
Install HTC TouchFLO Cube Ctrl from http://forum.xda-developers.com/showthread.php?t=343583 (read instructions)
Install sdkcerts.cab from http://forum.xda-developers.com/showpost.php?p=2064462&postcount=16
Softreset and... done! Remenber: quick-gestures and with moderate pression.
hey XDA
i have a CDMA version of the touch diamond, so can someone help me with downloading themes with the CDMA version? because ive tried other ways but it doesnt seem too work
so if anyone could help it would be greatly appreciateedd !
If it is a .theme file you will need to install a program (name slips me) otherwise .cab files seem ur route.
you need to download tf3d config v.67, its somewhere here in the forum. i actually attched it for you. from there you just have to download the themes and run the program.
when i installed it, and tried to run it, it was unexpected error occured?
Okay, I put the cad file on my phone and then installed it. It wouldn't work so I deleted the tweak.xml. Now it works but when I click the tweaks tab nothing shows up. Could somebody help me fix this?
Rom version 1.10.661.41 if that helps... sry just got it today and don't really get all of this yet
cant anyone help me?
You can't expect an answer within the hour, man You are using a Diamond? What kind of cab did you install? If you have a diamond, you have TF3D (also known as Manila) preinstalled and you're not supposed to install anything...
so what where you trying to do? and can you post the link of the page that has the cab file you loaded?
we have to know more in detail you just cant say. i installed something on my car and now it wont start.
you installed a cab ( i installed something on my car )
now it wont start ( you delteded the xml file and now nothing happens )
just give us more in detail what you where trying to do. what program or cab was it and what was it for. what carrier do you have?
hello...
gud day to everyone..
Pls help me on how to get rid of this tri-color that appears on the screen of my htc p4350 with an IPL 4.17.0002 and SPL 4.17.0000 written on it.. I really don't know what to do with this problem.. help me pls. pls. pls.
thank u so much..
1. This is the development forum. Your post is not a development post.
2. This has been covered a million times. Please search.
3. The tri-color screen is your bootloader. What did you do in the first place to get to this point? The more information about your problem that you give, the easier it is for everyone else to figure out what happened.
Hello..
Thank you for the reply...
I'm so sorry for posting in a wrong thread... What happened was.. I accidentally installed a wrong application on my phone.. The application I installed was for HTC touch.. so it was not compatible on my phone.. Everytime I turned on my phone the tri color screen appears and it displayed on the screen all the time.. I could not also hard reset the phone because of that tri color..
Pls help me what to do.. thanks much..
What "application" was it? Was it a ROM? Was it a HardSPL?
If it was a ROM, just flash another ROM.
If it was a HardSPL, search for "Goldcard" and create a goldcard.
hello..
The application I installed was the Touch-flo application.. But the application was saved on the memory card.. when I run the application, its when the tri color starts to appear..
Thanks much...
Can you give me an exact link to the application that you used?
Sorry I could not anymore remember what site it was.. It's been 6 months now that my phone was not working... It's only today that I discovered this site and I was so happy coz maybe u can help me..
thanks
Without knowing what program you used, it will be harder to figure out how to fix it.
The only thing I can say is:
1a) try to flash a Herald ROM through SD (read the walkthrough) (if your device is HardSPL'd)
1b) try to flash the stock ROM through SD (read the walkthrough) if your device isn't HardSPL'd)
2) If you still can't get past the bootloader screen, try searching for the word "goldcard" and follow those instructions on how to create a goldcard. You can use the goldcard to restore your phone back to working condition.
i'll try these options..
thank u so much..
hi ivan.. i have some questions regarding gold card.. i'm really new to this & don't have that much idea.. hope you can help me... thanks..
I have done the previous steps but I couldn't get this..
Ad.4) run Perl Package Manager from Windows Start Menu
change PPM Preferences (run Preferences from the Perl Package Manager menu and switch to the repository tab):
- Add repositories:
Name: itsme
Location: http://www.xs4all.nl/~itsme/projects/perl/ppm (there are many files on this location & i don't know what to download)
- Add repository:
Name: theoryx
Location: http://theoryx5.uwinnipeg.ca/ppms/package.xml
After database synchronization install those packages (at the main window of Perl Package manager find those packages, mark them for install (the icon with green plus, next to the search bar) and run marked action(green arrow icon)):
-Crypt-DES
-XdaDevelopers-NbfUtils
by the way, i'm using Windows XP service pack 2.. is it okay? eventhough the requirements is SP3? thanks much..
hello.. i'm so desperate.. could someone help me on this.. pls pls.. \
thank u so much...