Unable to accept incoming calls - Palm Treo Pro

this is a weird one. when I have an incoming call, the phone does not ring, vibrate or even show the incoming call screen. the only thing I can see is the little icon next to 3G icon on the top of the screen showing there is an icoming call. if i press the green button nothing happens. I am not able to recieve calls what so ever! a sof reset does nothing for this problem. a hard reset and restoring with Sprite Backup fixes the problem but it comes back after a few days. any body can help me with this problem? I am using Samsung today plugin. doe it have anything to do with the problem?

Do You use realVGA??

If you are using RealVGA, launch this application, choose 96dpi and uncheck "Disable phone skin", then tap OK to reset.

Related

Phone locks "on call" - phone app crash

Hi,
I faced this problem too often, so I ask on this forum to know if it only happens to me:
when I end the call, telephone programs stucks. In the top bar, the indication of an on going call is still there. Everything is working except telephone application. I can't open the telephone options. Even if I turn on Airplane mode, the phone logo in the top bar remains.
Any idea?
I had that problem once. Did it occur when you dialed a number not in your phone book? It turned out the prompt for saving a new dialed number was still there but I somehow couldn't access it. Perhaps turn that setting off?
no, it was an outgoing call to someone in my phonebook. (at least in my last problem)
facing the same problem. after ending a call the phone app freeze a couple of minutes and sometimes more than ten minutes
Did you installed the HTC patch to avoid the freeze ?
I didn't.
Could it be usefull there ?
This is really annoying if you have to wait 10mn before doing an another call !
Problem happened again
The problem happened again yesterday.
But worse. I was leaving a message on an answering machine. and I couldn't end the call !
Pressing the right key (end call) had no effect !
Usually in my previous problems, the other user was ending the call.
So I had to switch off the phone in comm manager !
I'm surprised that no one else faced this problem !
I tried to follow one's advice to wait then until phone gets back to normal. (release the phone icon in the top bar).
After one hour, I finaly rebooted the phone to be able to do an outgoing call.
Help !
Phone blocks during or after a call
Hello guys and girls
I had the same problem last week, a couple of times in a row, I was on the phone with a contact, after a couple of minutes I couldn't hear anything anymore and tried to end the call but no joy, a soft reset did the thing the first time, the second I waited a couple of minutes wich worked aswell. It was very annoying I must say especially as it happened 4 times in a row...
Hoping for a solution
Greetz
It seems a bug. You can press volume up/down buttons on the device itself to open the volume bar screen. After that just press somewhere on the grey area to go back to home screen. The top bar will restore from the phone application.
It's not the top bar. The phone application is completely unavailable.
We see the top bar,but the phone icon is stuck. Like if we were still on call.
I too have a similar problem.
Although I haven't particularly logged the prolems, I think that it only happens on incoming calls, and not outgoing ones.
During a phone call, the incoming sound just goes mute, and afterwards I can't hang up the call.
I reckon I have lost well over half the calls I have received because of this.
Luckily, not many people call me!!
I reckon this is a CRAP phone, and am seriously thinking of getting a REAL phone, and just using the HD as a PDA device. Good old HTC!!!!!!
I edited the title of this topic.
The phone app is really stucked : I called an answering machine, I wasn't able to end the call !
Help !
I am thinking of changing ROM.

G1 hanging up before i can answer

I tried good searching this and searching it here and it didnt come up.
This is a bizarre issue that has been intermittent for a while but has been very persistent over the last few weeks.
It seems that every time my phone rings and i take it out of my pocket to answer it hangs up on the call and doesn't even put a 'miss call' notification in the status bar. I am sure im not pressing the end call button before anyone asks!
Then if i try to dial back immediately it wont call - it goes to the call screen and then immediately goes red and says 'call ended'
I'm using root and jeasusfreak cupcake
I have the same problem
Do you have grooveshark appl too ?

Need help, mute ring doesnt work

When there is an incoming call, i press the mute ring button under the slide answer but it doesnt work. The graphic shows that the key is pressed but the ring still keeps ringing.
I just realised that when this happened, my (hard) call key also not functioning. although i can still use the phone on screen button to get to the call log. Anybody have solution for this.
Note: after i soft reset, the function is back to normal but will be the same after few days.
seem like i have decided to buy the wrong os mobile since thereisnt seem to be much help here

[Q] call screen, dial pad problem

my dial pad is missing when calling someone. screen flashes and the call screen is lost. but the call is normal.
a few times phone opened automaticly coming call. I checked all call settings, there is no anormal setting, please help.
I tried all versions rom. 2.1, 2.2, omg, chayogen etc. now I'm using 2.1 update, kernel leshak 2.6.29, lk2.08.1 samdroid
I have the same problem!
I have the same problem. It started about 3 days ago for no reason. When you press the call button after entering a number, the screen goes black and all the three buttons at base (back, windows and search) are not responsive. There is nothing you can do...you can't hangup or enter numbers until the other party hangs up, unless you reboot. (You can still talk and make the call as normal).
I tried rebooting, took battery out and also did a factory reset but nothing has resolved the problem.
However, I did find a workaround: flip phone over so it goes into speaker mode and then the dialpad becomes visible and you can end the call or use number pad, but you have to keep phone flipped over all the while. Another workaround is to use a Bluetooth headset when making or answering calls. Then the dialpad is always visible as normal.
If anyone knows what to do please respond!
there is no hope (from xda)
I decided to go service...(its doesnt matter I tried al versions rom, I hate this phone, enough, I tired to reload rom vs.)

[Bug] [CM11] Dialer bug when making calls

This has been a consistent bug I've had over months of different versions of cm11. When I make or receive calls there is an option to show the dealer screen to press buttons during a call; this never loads properly the first time for me. It just shows a small part of the top of the dialer when I press the button to show it. If I press the back button and load it again it works fine. Does anyone else have this bug or know a fix? I've tried resetting the data for the phone app. Thanks.

Categories

Resources