This has been a consistent bug I've had over months of different versions of cm11. When I make or receive calls there is an option to show the dealer screen to press buttons during a call; this never loads properly the first time for me. It just shows a small part of the top of the dialer when I press the button to show it. If I press the back button and load it again it works fine. Does anyone else have this bug or know a fix? I've tried resetting the data for the phone app. Thanks.
Related
Hi All,
I've found a strange little problem with my new HTC 3600i, for a little while (1 or 2 minutes) after a call my start menu doesn't work (no matter if i select from the windows button or clicking the screen via stylus). I've also noted that the Green call button also doesn't work.
This doesn't happy 100% of the time, but often enough to be annoying.
Any suggestions?
TIA
Hi,
I faced this problem too often, so I ask on this forum to know if it only happens to me:
when I end the call, telephone programs stucks. In the top bar, the indication of an on going call is still there. Everything is working except telephone application. I can't open the telephone options. Even if I turn on Airplane mode, the phone logo in the top bar remains.
Any idea?
I had that problem once. Did it occur when you dialed a number not in your phone book? It turned out the prompt for saving a new dialed number was still there but I somehow couldn't access it. Perhaps turn that setting off?
no, it was an outgoing call to someone in my phonebook. (at least in my last problem)
facing the same problem. after ending a call the phone app freeze a couple of minutes and sometimes more than ten minutes
Did you installed the HTC patch to avoid the freeze ?
I didn't.
Could it be usefull there ?
This is really annoying if you have to wait 10mn before doing an another call !
Problem happened again
The problem happened again yesterday.
But worse. I was leaving a message on an answering machine. and I couldn't end the call !
Pressing the right key (end call) had no effect !
Usually in my previous problems, the other user was ending the call.
So I had to switch off the phone in comm manager !
I'm surprised that no one else faced this problem !
I tried to follow one's advice to wait then until phone gets back to normal. (release the phone icon in the top bar).
After one hour, I finaly rebooted the phone to be able to do an outgoing call.
Help !
Phone blocks during or after a call
Hello guys and girls
I had the same problem last week, a couple of times in a row, I was on the phone with a contact, after a couple of minutes I couldn't hear anything anymore and tried to end the call but no joy, a soft reset did the thing the first time, the second I waited a couple of minutes wich worked aswell. It was very annoying I must say especially as it happened 4 times in a row...
Hoping for a solution
Greetz
It seems a bug. You can press volume up/down buttons on the device itself to open the volume bar screen. After that just press somewhere on the grey area to go back to home screen. The top bar will restore from the phone application.
It's not the top bar. The phone application is completely unavailable.
We see the top bar,but the phone icon is stuck. Like if we were still on call.
I too have a similar problem.
Although I haven't particularly logged the prolems, I think that it only happens on incoming calls, and not outgoing ones.
During a phone call, the incoming sound just goes mute, and afterwards I can't hang up the call.
I reckon I have lost well over half the calls I have received because of this.
Luckily, not many people call me!!
I reckon this is a CRAP phone, and am seriously thinking of getting a REAL phone, and just using the HD as a PDA device. Good old HTC!!!!!!
I edited the title of this topic.
The phone app is really stucked : I called an answering machine, I wasn't able to end the call !
Help !
I am thinking of changing ROM.
my dial pad is missing when calling someone. screen flashes and the call screen is lost. but the call is normal.
a few times phone opened automaticly coming call. I checked all call settings, there is no anormal setting, please help.
I tried all versions rom. 2.1, 2.2, omg, chayogen etc. now I'm using 2.1 update, kernel leshak 2.6.29, lk2.08.1 samdroid
I have the same problem!
I have the same problem. It started about 3 days ago for no reason. When you press the call button after entering a number, the screen goes black and all the three buttons at base (back, windows and search) are not responsive. There is nothing you can do...you can't hangup or enter numbers until the other party hangs up, unless you reboot. (You can still talk and make the call as normal).
I tried rebooting, took battery out and also did a factory reset but nothing has resolved the problem.
However, I did find a workaround: flip phone over so it goes into speaker mode and then the dialpad becomes visible and you can end the call or use number pad, but you have to keep phone flipped over all the while. Another workaround is to use a Bluetooth headset when making or answering calls. Then the dialpad is always visible as normal.
If anyone knows what to do please respond!
there is no hope (from xda)
I decided to go service...(its doesnt matter I tried al versions rom, I hate this phone, enough, I tired to reload rom vs.)
I have searched and then made this thread. There were some people with home button issue but None of those were related to my problem.
PHONE MODEL - GT-I9505 ( International version)
I have had my S4 for a couple of months now and I am addicted to flashing. I flash a test lot of new roms.
MY PROBLEM
When i make or I get a call, Once i pick the call and put my phone to the ear and after the proximity sensor turns off the screen i cannot use my home button or powerbutton to wake the screen during call. For example if i want to cut the call During a call. I simply cannot do it. Sometimes the home button will respond, Some times it wont
For the home button to work The other party has to cut the all only when my phone detects that the call has been disconnected it wakes up. Looks like the home button stops functioning ?
I dont know what is happening.
I thought it was the rom issue, But it isnt. I tried two different roms. Did the same behaviour.
Any advice or anything to help me will be appreciated. Is my hardware damaged?
My phone is never dropped and is very new like .
ROMS I TRIED
Wanam Lite.
Cynogenmod 10.1
same problem. any solutions?
I am having the same issue with my home button. Won't press during calls. Did you ever find a solution? Thanks!
rdhalla said:
I have searched and then made this thread. There were some people with home button issue but None of those were related to my problem.
PHONE MODEL - GT-I9505 ( International version)
I have had my S4 for a couple of months now and I am addicted to flashing. I flash a test lot of new roms.
MY PROBLEM
When i make or I get a call, Once i pick the call and put my phone to the ear and after the proximity sensor turns off the screen i cannot use my home button or powerbutton to wake the screen during call. For example if i want to cut the call During a call. I simply cannot do it. Sometimes the home button will respond, Some times it wont
For the home button to work The other party has to cut the all only when my phone detects that the call has been disconnected it wakes up. Looks like the home button stops functioning ?
I dont know what is happening.
I thought it was the rom issue, But it isnt. I tried two different roms. Did the same behaviour.
Any advice or anything to help me will be appreciated. Is my hardware damaged?
My phone is never dropped and is very new like .
ROMS I TRIED
Wanam Lite.
Cynogenmod 10.1
Click to expand...
Click to collapse
jasonbosch said:
I am having the same issue with my home button. Won't press during calls. Did you ever find a solution? Thanks!
Click to expand...
Click to collapse
Go to Apps - Settings - My device - Call - Untick Turn off screen during calls :highfive:
This is something I hadn't encountered before--I find that none of my dialers (the marshmallow stock dialer or my usual app DW Contacts) sends a DTMF tone when I am in a call. Example: "press 1 to talk to Jack". I can press 1 but nothing happens on the other end, doesn't matter who I am calling.
Second problem: when I'm in a call, I don't see any options for hanging up. Maybe this is some strange marshmallow "optimization"? I've looked in the settings for stock dialer and DW Contacts but don't see anything to remove the option to hang up.
UPDATE: I flashed this same ROM but the 6.0 non-debloated version. The DTMF tones are now working properly and I'm getting DTMF tones (both on my end and registering when I call a number and press a key in response to the menu) and an option for hangup (a red "hang up" icon in the middle of the screen.) I don't know if this means the February update caused a problem, or possibly something was missing in the debloated version. It could certainly be that the SIM card which was previously in another phone wasn't working properly with this phone until I called AT&T and asked them to "register" my Pure on this SIM. if the latter, it took a while, since I was still having the problem an hour later when I downloaded and flashed the non-debloated version.
Anyway, that's how I solved this problem, if it's useful to anyone.
Thanks. Been having same issue!
kettir said:
This is something I hadn't encountered before--I find that none of my dialers (the marshmallow stock dialer or my usual app DW Contacts) sends a DTMF tone when I am in a call. Example: "press 1 to talk to Jack". I can press 1 but nothing happens on the other end, doesn't matter who I am calling.
Second problem: when I'm in a call, I don't see any options for hanging up. Maybe this is some strange marshmallow "optimization"? I've looked in the settings for stock dialer and DW Contacts but don't see anything to remove the option to hang up.
UPDATE: I flashed this same ROM but the 6.0 non-debloated version. The DTMF tones are now working properly and I'm getting DTMF tones (both on my end and registering when I call a number and press a key in response to the menu) and an option for hangup (a red "hang up" icon in the middle of the screen.) I don't know if this means the February update caused a problem, or possibly something was missing in the debloated version. It could certainly be that the SIM card which was previously in another phone wasn't working properly with this phone until I called AT&T and asked them to "register" my Pure on this SIM. if the latter, it took a while, since I was still having the problem an hour later when I downloaded and flashed the non-debloated version.
Anyway, that's how I solved this problem, if it's useful to anyone.
Click to expand...
Click to collapse
Thanks. I've been having the same issue on my new Moto X Pure (rooted on Sprint), and was starting to freak out today when I realized that my phone wasn't being recognized for menu options AND there was no way to hang up from a call.
Fingers crossed that this will work for me as well with the non-debloated version.