Hi there
I seemed to have got myself into trouble. My HD Touch has locked itself.
I restored a backup from SPB Backup, it has asked for a password and I have tried both passwords which I had on the system and without any result.
I have also tried to perform a hard reset using the power keys and the pressing the two volume buttons but I held onto them for over 5 minutes without any result.
Has anyone got any other ideas how I can get back into the phone?
Thanks
Kaid
A hard reset is press and hold power to turn off.
Then press and hold both volume buttons, whilst holding the volume buttons press and release the power button.
Once the boot screen is visible release the volume buttons and follow the on-screen instructions.
Thank You - Relief
Mild panic was beginning to set in here as I thought I had f**ked up a very expensive phone.
Back in business!
Cause of lock..
Hi,
Any idea on what the cause of the lock was?
If you use pushmail you're pushmail provider (mostly work) may have a policy which requires a password. They can remotely activate this..
If this was the case, google for "Zenyee Stay Unlock" works great for me..
Regards.
BSmart said:
They can remotely activate this..
Click to expand...
Click to collapse
So a push-mail provider is able to totally lock my device? Another reason not to make use of this service .
Related
hello...
my on/off button is defect. so i cant switch it on. Only via reset
can i configure another button for reactivation from standby? because that does not work anymore too
thanks for help
not sure about hermes but my phone turn on at the press of any key unless i set it only to turn on by on button in buttons in settings
Go to the settings, then to system, then go to the keylock options in there and set it to not lock at any time.
Works with any key, but its not really a good idea to have that in your pocket.
I would say you should get the button repaired instead.
Thanks a lot guys...
does someone knows how i can switch off the phone? everytime i want to swithc it off i have to push the reset button or do a soft reset :/ i thin k a regular shutdown would be better...
i friggin have the same problem. My girl dropped my phone and the power button is messed up...
I press the camera button to turn on tho.. i cant turn off unless i let it sit and it does it itself.
http://www.mobiletopsoft.com/pocket-pc/download-psshutxp-turn-off-display-off-pda-0-29.html
Thank You ^^^
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
honduh said:
Hello all,
I am new to the forums but I have been using the HTC Touch for a few months now, and would like some guidance about a few problems i'm having. First off, I am using the official 6.1 rom with sprint....
I am running S2U2 and am having a problem with my phone turning off while in my pocket. It seems the power off menu can be brought up if you hold the power button, even if S2U2 is running. This is very frustrating, is there anyway to lock the power button when S2U2 is running, or any other option?
Is there any edits that can be done to make S2U2 call the factory device lock? I couldnt find anything related to the lock in the registry. If there is, is there anyway to assign the factory device lock to the power button, so that when you blank the screen it auto-locks? I love this feature with s2u2, and with stock device lock it takes 3 buttons to do this...
Thanks!
Click to expand...
Click to collapse
The only thing that I could suggest that might help is to get yourself a good case for your phone that would protect the button from being accidentally pushed. I have never had this problem with my phone. The button actually has to be pressed and held to bring up the power off menu. Even when not in it's case, I have never had this happen; however, the phone is only out of it's case, when I am using it. In the case, there is even less chance of powering off the device.
Rod.
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
TheChampJT said:
The default device lock works just like S2U2, as it leaves only the power button unlocked. If you locked all buttons, how would you turn your phone back on??
Click to expand...
Click to collapse
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Find what the application is that launches when pressing the button and add it to the S2U exclusions list.
I have a verizon and my power button toggles screen off and on, so im not entirely sure, Is this a stock popup or a program you installed ? There is probably a registry entry somewhere that defines how the power button functions jsut as the button manager does for other buttons.
honduh said:
The problem i'm having is that the phone actually powers off while in my pocket somehow....what i'm saying is that the phone not only "wakes up" from the standby mode, but also calls the shut down window and you can press the "yes its ok to shut down" button while s2u2 is running, something the stock device lock will not do.
It would be really nice if there was a slide type lock that was based off the code of the stock device lock.
Thanks for the replys
Click to expand...
Click to collapse
I understand your point, and am still wondering what it is you keep in your pocket with your phone that shuts it off!? Anyways, why do you keep referring back to the default device lock? S2U2 performs the same way, as it locks everything besides the power button. If the power button is locked, how would you wake up the device to unlock it ???
the power button has two functions, it blanks the screen if you press it, or it brings up the power off menu when you long press it. The problem i'm having is s2u2 doesnt prevent the power off menu from coming up, where as the stock device lock does. Thus, it is possible to completely power off the phone while the keys are locked.... of course I want to be able to wake the phone up with the power button, but i dont want to be able to turn it completely off.
And i'm not sure how it turns off in my pocket, except i usually carry it with the power button face down (phone upside down) and it must press against the bottom of my pocket...
The application that it is calling is the stock shut down menu, i'm not sure how I could add this to the exception list, as I dont know how to call it remotely....
Thanks again for the replies!
The title of this caught my attention.
It would be very nice to have a registry edit that will lock the device when powered off or on device wake up.
I use S2U2 and I am really not liking it personally, but it is better then the default setup currently I feel.
I locked my Touch HD with a blackberry connect password. Now the device dosn't accept the password and it is locked before SIM password request is showing up. So I cannot access any function/ program anymore. How can I reset the device without touchscreen interaction. Please help, my HD is just a brick now! Thanks in advance, Regards, Thorsten
tleyh said:
I locked my Touch HD with a blackberry connect password. Now the device dosn't accept the password and it is locked before SIM password request is showing up. So I cannot access any function/ program anymore. How can I reset the device without touchscreen interaction. Please help, my HD is just a brick now! Thanks in advance, Regards, Thorsten
Click to expand...
Click to collapse
Turn off the device. Press both volume keys and then power on while holding the 2 keys down.
Moved to general!
turn off device
Press in the same time the 2 volumes button (up and down) and a quick press in the power button
Release power button and follow what is writen on the screen....
Thanks Israel, it works again. Buhhh I'm lucky!!!!!!!!!!!!!!!
the instructions to hard reset are in the manual
Hello to all of you... I have a Mega...I actived the wlan and my phone got stuck...I turned it off and now, when i turn it back on, it hangs on the 'insert pin' screen...i removed my simcard but the same happens...i click 'cancel' and I can see that wlan is still on..an my phone is still stuck..it doesn't connect via active sync, i can see only my sd-card...i have some cntacts i would like to save from the phone's memory, but if i can't do it, i will perform a hard reset..so i'm asking you...do you happen to know how to save my contatcs??? thanks!
After hours of searching, i found out what happened to my phone..It got "Newton's ring" (an oily rectangular shape in on the display)
http://forum.xda-developers.com/showthread.php?t=591292
And it's met on the Touch Pro, Diamond and others...
I think I'll send it to warranty...
I'm not really sure but you can try a hard reset:
Hard Reset
1. Power Off the phone.
2. Press Both Volume UP & DOWN Keys together.
3. Keeping the keys pressed, power up the phone.
4. The screen will display a message.
5. Press the Volume UP Key.
Hello everyone here,
I just run into trouble - a power button on my Galaxy J5 failed. Few days ago home button failed too.
Device is still on and running, so I need a quick check for not locking myself out.
1) after phone was locked - can volume keys wake the screen? (so I can enter e.g. an unlock pattern)
2) does J5 require to press power or home button to turn it on (e.g. after power down)
3) does J5 require to press power or home button to wake screen after it is restarted?
also, if anyone would like to suggest...
4) how can I access restart menu? or just restart the device?
5) any other issues I can run into?
6) can the be a software issue?
7) can a non-affiliated repair shop get this easily fixed or would they probably make things worse?
any advice is welcome!
phone is not rooted. Lock screen security (pattern) is now deactivated.
Model SM-J510FN, J510FNXWUAQG1, Android 6.0.1,
thanks!
Plug in charging, if it wakes up its working!!
thanks for feedback!
yes, it is working I installed Gravity Screen app and it seems to be doing fine with turning screen on and off.
The only question left is what to expect if the battery should run off one day or I'll need to reboot the phone or take out the battery... I am afraid it expects pressing power button to start booting, but its not working... any ideas?
hovaz said:
Hello everyone here,
I just run into trouble - a power button on my Galaxy J5 failed. Few days ago home button failed too.
Device is still on and running, so I need a quick check for not locking myself out.
1) after phone was locked - can volume keys wake the screen? (so I can enter e.g. an unlock pattern)
2) does J5 require to press power or home button to turn it on (e.g. after power down)
3) does J5 require to press power or home button to wake screen after it is restarted?
also, if anyone would like to suggest...
4) how can I access restart menu? or just restart the device?
5) any other issues I can run into?
6) can the be a software issue?
7) can a non-affiliated repair shop get this easily fixed or would they probably make things worse?
any advice is welcome!
phone is not rooted. Lock screen security (pattern) is now deactivated.
Model SM-J510FN, J510FNXWUAQG1, Android 6.0.1,
thanks!
Click to expand...
Click to collapse
I dunno but tapping on home button wakes the screen..
hovaz said:
thanks for feedback!
yes, it is working I installed Gravity Screen app and it seems to be doing fine with turning screen on and off.
The only question left is what to expect if the battery should run off one day or I'll need to reboot the phone or take out the battery... I am afraid it expects pressing power button to start booting, but its not working... any ideas?
Click to expand...
Click to collapse
Yep.. Then you'll have to take it to the service centre, that's the only solution I can think of.. :silly:
today the power button misteriously started to act again. I'll stick to Gravity app for waking the screen and hope the button will work in rare cases when needed after powerdown....
thanks everyone for suggestions!