Hi Everyone,
I use Fedora linux as host OS in my PC and XP as guest OS with VirtualBOX. I installed the ActiveSync to the XP, but my HD can't connect to the OS. The XP wrote "new hardware found" as PCI device, but couldn't find driver in the internet. (I think driver is not necessary) I see my HD under My Computer, but it is inactive. How can I make a connection between the windows guest and my HD? Please anybody help me!
Thanks
(PS:Sorry for my poor english.)
Related
I cann't find HTC modem driver for GPRS connection through USB cable or BlueTooth
Help, please!
Maybe some suggestions how make corrections to existing x86 usbmdm.inf file (if it possibly and comes easily)?
i would not hold my breath
even mayor brand scanner, printer and webcam makers
have desided to skip xp 64bit allgoether
and not support 64bit untill vista
Help Vista Lost
Help i lost my Windows Vista in my HTC SHIFT pleas dump a HDD image for one Shift Vista and upload .
Thanks
Same here. I lost vista partition and recevery partition
My Partition is clear , i run Linux ot my Shift my linux build work .
My Wireless not Run in Linux.And I need a Vista original Image Vista to run WiFi.
http://ndiswrapper.sourceforge.net/joomla/
with that you can use windows driver on your Linux.
My WiFI it TurnOFF in Vista.
I Need a TunrON WiFI in Vista to work in Linux.
Install new Vista in my Shift and no drivers found .
My HDD Not and vista no install..
Same here. HTC refuses (by now) to send install DVD (Its incredible)
I Need dump for hdd on HTC Shift
Hey guys, i'm stuck with an old GSM version of my Artemis and cannot upgrade it...
I've tryed to upgrade using VMWare (running a XP SP3 virtual machine), but when the phone goes to Bootloader mode, the VMWare loose the USB connection... When i switch to Windows Vista, there isn't any device that correspond to my Mobile Phone... Since Vista cannot "see" the phone anymore, the VMware doesn`t "see" it too...
I`ve tryed to run a Bart_pe winxp enveiroment, but I cannot install active_sync on it...
Anyone has come to this problem?? Vista OS stop "seeing" the phone at bootloader mode??
Win 7 (Full "Vista") has the same Problem. When the flashing should start, it loses the connection and fails.
You need a full WinXP on a real PC to do a this.
okay so i cant find a solution to this one, if you can help me, id really apreciate it.
okay so im trying to connect my hd2 to my windows 7 laptop. whenever i connect the two. nothing happens except my phone starts charging!
I tried it on 4 computers, all didn't work
i did the "turn off faster sync thing, that didn't work
ii JUST got this usb cord, so its not broken or anything
i also hard reseted my phone a while back if that helps
thanks in advance
What OS are you running on your HD2?
Windows Mobile 6.5 requires Active Sync to be installed on your machine and should prompt you to do so the first time you connect via USB.
Android should be effortless by just selecting the USB connectivity from the drop down alert menu.
WP7 requires that you have installed the latest version of Windows Mobile Device Center, which can be found by online search. You must download the appropriate x86 or x64 version, as is appropriate to your version of Win7.
Is there a scenario that I've missed?
Thank you for posting!!
my phone runs on windows 6.5.
do i download activesync to my phone or computer? i tried doing it on my computer but it gives me an error :
" This Program is blocked due to compatibility issues"
"previous versions of Active sync cannot be installed on windows vista or later."
i was trying to download Activesync 4.5
PaigeLovesU said:
Thank you for posting!!
my phone runs on windows 6.5.
do i download activesync to my phone or computer? i tried doing it on my computer but it gives me an error :
" This Program is blocked due to compatibility issues"
"previous versions of Active sync cannot be installed on windows vista or later."
i was trying to download Activesync 4.5
Click to expand...
Click to collapse
You are Windows 7 so require WMDC 6.1
are you 32 bit or 64 bit W7 ? they require different WMDC 6.1 installs ...
Download: WMDC6.1 32bit
Download: WMDC6.1 64bit
hello!
i have a 64 bit
link above, good luck
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
erik.aragorn said:
Hi, is it possible connect WIN CE with WIN 10(1909)?
I use Riftek PDA(Railway Wheel Profile Gauge IKP,IMR, IDK) with WIN CE 6.x...but problem is with connection via WMDC. PC just ignoring connection. I try WIN 7 in VB, but no lucky too. Please, can somebody help me with this? I need connection with PC for download and back up data from measuring.
https://riftek.com/eng/products/~show/instruments/railway-devices/railway-wheel-profile-gauge-ikp
Click to expand...
Click to collapse
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Mik-el said:
Don't use a usb 3.0 port, try a 2.0.
Did you try to run WinMo device manager in compatibility mode for Win7?
Click to expand...
Click to collapse
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
erik.aragorn said:
Problem is still continue. I try USB 2.0.
In windows 10 it was once connect with HTC Touch 2, what I try. But Riftek PDA still nothing. And HTC have too problem, after PC restart.
Win 7 in VirtualBox have problem too, with WIndows Mobile and CE connect. It wrote me error with USB sync driver, code 10. But driver install was from MS Update.
Click to expand...
Click to collapse
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Mik-el said:
I've never had problems connecting my WinMo device to my computers.
Before WinMo device manager there was Active Sync, if I'm not wrong it works on Win XP only.
I don't use virtual machine very often, if I insert a usb pendrive to my pc I can't see it on my virtual machine obliviously, you need to change settings for the virtual machine and so on. In the worst case I suggest you to install a lite version of Win7 alongside the main Windows installation on your computer
Click to expand...
Click to collapse
Yes I have not problem too, but last 2 update make big problems with WMDC under Windows 10. Only solution what I see is, found old NB and run Windows 7/8 on it.
Or is it possible run Win CE 6.x app from this PDA on WIndows Mobile device with WIndows 6..1/6.5? I try it, but i got error. But I think it with little editing it is possible run it. But how?
https://riftek.com/eng/support ->Railway Wheel Profile Gauge -> IKP-5 Software for PDA (from 2016) (2MB)