urgent help needed - iPAQ rw6828, XDA Atom General

my o2 atom cannot connect to telephone network...it sometime connects but still cant call from mobile...whenever there is network it says "want to auto configure?"when presed yes there aint my country listed there & when pressed no it shows traingle icon right on the top bar & though tower no phonecall can be made...tried upgrading the rom aswell, not helping

Related

GPRS+NETWORK REGISTRATION+CALL MISSING PROBLEM

Hello there i got some probs here releted to GPRS, Network Registration and Call Missing...
They are odd and annoyning..so please read through the topic and if possble then gave me some feedback on how to solve the probs..
My Problems Are...
1) if i insert a sim into i-mate jam which is gprs anabled 4m the service provider...then it take 2-3 minute to show the network bar after a reset....but it doesnt happen if i insert a sim from same provider which gprs is deactivated.....
2)And sometimes i just do miss calles even i have full network but others called me and hear that the computer telling my cell is off or out of network covarage...and on that times if i want to do any network tasks like checking my credit by *566# then my jam hangs in phone menu for 1 min then show failed then reregister my network..this think is doing frequently..as a result i have to check that am i in hanged network or not if im on hanged network i cant receive or make call i have to do a reset to get rid of that probs..but again after some hour it came back again..(full network-but cant receive call or make call)..
3) and when the gprs activated sim is inserted and after 2-3 minuted when network bar and "G" icon came i cant log into gprs connection which shows a error "the answering modem is disconnected......tap setting" just after i select connect....even it didnt try to connect..means just it showed up instantly no trying as it happend in earlier farmware which was releted to caller id software... but i found a solution for it (My problem)...
the think i have to do is...go to start>setting>phone>network>network selection..then select manual...after a searching i select my network operator 4m drop down list...then after a minute or two i became again register to the network...then i again select automatic 4m the network list...this time the network search doesnt occure and now i can connect to gprs as usual..... (notes i need to do the same process everytime i reset the device otherwise i cant connect to gprs...and i have to complete the cycle..means after selecting manual and then 4m the availaval network list i register to my operator....but even this time it cant connect gprs...only after that process when i select automatic again then i can connect gprs)
all this think happen to those sim which have gprs connection...means "after inserting those sim the "G" icon appear"...the sim's which are not gprs activated "Means "G" icon doesnt appear after inserting the sim" is not affected by this problem....(for those sim the network bar came just after a reset no legged time..just normal..and call missing probs is not present..but i cant use gprs in a non activated sim!!!!...if i active gprs in that same sim by calling the service provider then the problem started to occure)
NOTES:
i have switched a number of sim 4m 2 provider.....for operator with EDGE support (My operator) has the problem in gprs activated sim..but not in gprs deactivated sim... and another operator which have old gprs only (no edge support) is not effected by this problem..means i can connect to gprs and network legging is not present..
i have done a number of hard reset.....
i tried it in a clean jam with no software..or ex rom installed...
i have intalled the latest firmware from here.... 1.13 and radio 1.13
even did tried it in older firmware 1.11 with various radio started 4m 1.01,1.06,1.11 and others
my network operator run on 900mhz frequency... (GrameenPhone-Bangladesh)
i was able to use the gprs as usual even a month earlier without any problem...it started recently 4m the day the regisrtation to network lag problem started....so im sure they are releted with each other...
i also tried changing the gprs slot 4m setting menu....
i have used the sim(s) in another jam i owened....there has no such problem... on that set everything works ok.
Other nokia or sonyerricson set is also working...so i dont think it is a network probs..
all the other pda funtinallity other then the phone portion works great...no probs atall there..so i guiss it has omething to do with radio portion..
and all gprs desabled sim works flawless in that set...
but nothing is helping me other then of the network selection method i mentioned earlier (first manual>then again automatic...)
now my question is what can i do???
1) to solve the network bar problem (means registration to network) which came after 2-3 minute after the reset...so i cant call within 4 minute after reset...cant even go to prone pad..it doesnt came before the network bar came...
2) why i cant connect to gprs without doing that nasty trick....i have mentioned earlier...
3)And is it a hardware fault or rom fault??or in somehow my operators fault as another operator sim works flawless..
PS:recently i montored that i can update firmware via activesync/pc as usual the i-mate's one or t-mobile one with noid..but if i tried to do update via SD card then the radio portion doesnt updates...
as an example i have 1.11,1.11 rom-radio combination installed..and i have a earlier backup of bigstorage rom of my jam with rom radio combination 1.13,1.13..but after doing the sd update only the rom portion did updated to 1.13 radio is still in 1.11...though i can updated it later on by pc using activesync..
and again with ntrw writer i did copied only the radio file (1.13) to my sd card (downloaded 4m ftp of the forum...the dumped sd card one not the nb1 file.)..but when i tried to update in bootloader mode it gave me a error called "section 1 error" and it doesnt start the flash..though the complete rom package did updates via bootloder but again radio portion didnt updated..
Anyways if anyone can enlighten me on how to solve that very stupid problems then i will be greatfull!!
Thanks

Trinity locks up when answering/ending call

I have a colleague with a HTC P3600 GER, he complains that sometimes when he presses green button to answer a call or red button to end the call the device becomes unresponsive and he has to soft reset the device.
Is this a known problem?
Problem 3G -> GSM
Hi !
Same issue with my device but only in one condition:
I get an incoming call within a mixed 3G/GSM provider network (A1-Vodafone Austria) - i press the green button and my Trinity switches from 3G to G - the call seems to be answered but i cannot hear anything.
----->I wrote the following error description to HTC:
Massive problem answering phone calls in mixed GSM/UMTS network.
My P3600 works fine when the display shows 3G Network. Answering a call works fine by pressing the left phone button. The display closes the caller bubble and switches to the connected status and shows caller and time and so on. But every time the phone is connected to only GSM radio station - display shows "G" beside the antenna icon i cannot answer a single call. Pressing the left phone button results in showing the white bubble with caller information and nothing happens - the call doesnt start the calling party always hear the normal beep tone while waiting for pick up of the phone. In this circumstances i cannot hear anything from speaker and also cannot end the call by pressing the right phone button (hangup) - the software of the P3600 stops responding and the caller bubble is frozen at the display. When the call is discontinued by the caller the P3600 resets to normal activity waiting for a call and showing a missed call !! This happens at every GSM call - about 10 t! imes since yesterday !! It is very important for me that i can answer calls in both network connection modes because the austrian provider A1/Vodafone has mixed environment all over the country. The receipton of GSM while the problem comes up is always more than 2 or 3 bars on antenna display.
Hope that there is some possible solution for this problem.
ROM Software Version is:
1.16.407.2 (German)
Setting for network provider is:
Automatic
Band selection is:
Auto
Auto
Many thanks in advance !!
Gerhard from Austria
----->The answer from HTC was:
Hello
This seems to be a very strange issue that you are experiencing and something that we have not heard of before.
Does this occur every time that you receive a call in a non-3G area?
I would recommend that you perform a Hard Reset on the device. This will restore the device back to the factory software settings. This will also remove all settings, contact , calendar information as well as any files and SMS.
Once this has been performed I would ask you to test if this has resolved your issue. If this has then you should experience no more issues. If this does not solve your issue then I would recommend that you contact your local repair center, details below, to arrange a repair of your device.
+ 43 (0) 508115555
[email protected] <mailto:[email protected]>
Yours sincerely
Dan Mackie
[email protected]
http://www.htc.com
----->The Hardreset does not fix the problem :-(
Still waiting for a firmware upgrade ....
Gerhard
Since Uprade to Radio ROM 1.41.00.11 (http://forum.xda-developers.com/showthread.php?t=304006) i have no more problems with answering phone calls !!!
Hope the Radio ROM will be included in an official ROM Upgrade from HTC soon.
Gerhard

Problem Network

hi all,
pls help me .my pda problem with phone and attena.some time network good work but some time no attena and after make call for calling message on screen show that; network service is not avalible.try again..
pls help for me,
my pda o2 flame
0s wm5
GSM VERSION5C2

"phone not ready" error O2 phone on Orange (Fixed)

Hi
I am trying to get my O2 XDA mini s working with orange. I have CID and SIM unlocked the phone, loaded the recommended 1.05 button rom (eventually!) and installed 2 "network select" programs. The phone works in normal "talk" mode so I can make and receive calls. If I try to send a text message (SMS) I get a message box which states "phone not ready, try again in 15 seconds". If I tap the signal strength icon at the top of the screen and tap "settings" I get the same error. If I go to settings/phone I get the same message! This is driving me NUTS!
What am I missing?
Pete
Sorted, just needed to load the T Mobile rom. Must be related to the old GSM radio rom?

O2 XDA Flame incompatible with New BTS

Hi
when insert sim card to my device (O2 Flame) detect network automatically and i can send sms with it....when i have incoming call i can not answer it because answering key (green key) is inactive and on screen button is inactive too ........when i call somebody it does not last very long because deactive call ends automatically after 13 secondes...... the other problem is about 15 min NO SERVICE massage is shown on screen.......
i install this WM5.0 or cookes (WM6.1) ROM and other rom but don't solve this problem...i think O2 Flame compatible with Nokia BTS and incompatible with other BTS.......i need hack my device
Plz help meeeeeeeee......thanks

Categories

Resources