Related
Hi,
I just bought an MDA Pro direct from T-Mobile's website and it was delivered today. Unfortunately, while the PDA side of things works perfectly, it won't connect to T-Mobile at all.
On the 'T-Mobile' start up screen it displays the text 'No GSM' above what I think must be version information.
It reports 'no service' in the phone status bubble, and SIM Manager says: "Only emergency service calls can be made without a PIN" When I enter the PIN I was given, nothing happens. I think it goes into 'change PIN mode' because then I can put two more 4-digit numbers in (it doesn't matter which!) and then it says "Unknown PIN Status. Unknown PIN Error"
Unfortunately it isn't just a SIM problem as the SIM works in my O2 P800.
I've spoken with T-Mobile and they want to swap the handset, which would be fine if they had any in stock! I'm wondering if anyone here had any advice on ways I could try fixing this short of waiting for them to get in touch and tell me they have another handset I can try.
Any suggestions would be much appreciated!
Hi,
what is your local provider ? Is it T-Mobile, Vodafone, E-plus or O2 ?
The mda pro only works with a t-mobile sim !
- Superbowl
Try to clean the sim before putting it back in the MDA Pro,
Generally works for me!
i had the same problem with my jasjar here is Australia......my sim works on any other pda and phones but not the jasjar.....apparently the sim that i have or some of the new sims have a little higher voltage than normal.......and the jasjar dont like it.....so what i did was replace the sim with another one and that worked......al they had to do was port my number to the new sim......but before it did that tried to put the sim in first and it started to look for a network so i knew this was gonna work......becoz before when i put my old sim in it just says invalid sim or no sim........so try replacing ur sim with another one......perhaps try and get an old sim maybe the sim has some in stock.....i bet ya that will wrok....good luck
Thanks guys ... I'm trying to find an older T-Mobile SIM to try. It's just frustrating! I've tried giving the SIM a wipe, to no avail. If it is that the SIM is slightly incompatible, T-Mobile sending out another unit won't really help, right?
How annoying!
If anyone else has any great ideas I'd love to hear them!
try using someone elses sim and put it in the device and give it a try to check if its definitely the unit and not the sim......when i rang the tech support for optus thats what i was advised.....and they were right....sim voltage was the problem......anyways try getting another sim.
Contact customer services.
The problem sounds like you SIM is too old.
They should ask for your SIM serial number, if its too old they'll offer to send you a new SIM or something else to make it work straight away??? :wink:
The MDA PRO as its a 3G type phone with WCDMA it needs a diffrent sim card that is usaly known as a 3V USIM.
Its the same on Three in the UK, the sims from their phones will only work in 3G phones not standard GSM ones and vica-versa.
Old SIMs (from about 5 years ago) are rated at 5 volts. Newer ones are 3 volts (not just for 3G). Trust me, I work for a certain mobile phone company who sponser West Brom. ;-)
The problem will be fixed in a future software upgrade. But for now you need a new SIM or your phone unlocked.
Trouble is, this *is* a new SIM... I'm moving back to the 'hardware fault' diagnosis I think.
I went to a friendly carphone warehouse shop in Oxford and tried a new (and definately working) T-Mobile PAYG SIM and that gave exactly the same error.
Maybe T-Mobile need to send me a 3G SIM. I guess I'm probably just going to have to wait until they can send me a new handset to see what happens.
Ho hum!
There's no such thing as a 3G SIM. The 3G gigery pokery happens on the phone. There is no need for a different SIM. The MDA Pro has a problem with SIMs with certain serial numbers (Don't know which coz I'm not at work). You need either a SIM that the phone likes or your phone unlocked. Call customer services if you still have your phone.
Had the same problem allready twice in 2 weeks.
One time a soft reset made the device working again - another time I had to take out the sim card and put it in again, then it worked. But all email accounts were gone and had to be installed again.
Chris
Slave1 said:
There's no such thing as a 3G SIM. The 3G gigery pokery happens on the phone. There is no need for a different SIM. The MDA Pro has a problem with SIMs with certain serial numbers (Don't know which coz I'm not at work). You need either a SIM that the phone likes or your phone unlocked. Call customer services if you still have your phone.
Click to expand...
Click to collapse
Hi, thanks for that reply... it seems very useful! If you could post/pm me the numbers of those SIMs that the MDA Pro is unlikely to like I'd really appreciate it... customer services aren't striking me as very helpful (and certainly not knowledgable) and I can tell that if I call them they're still going to say: Wait until we have another handset in stock and we'll see what happens then. Which doesn't help me much as who knows when that will be?
Thanks!
Any SIM serial not starting with 06 or 07 will be affected by the issue.
eg 90043575, the serial starts with 04.
This will be fixed with a software upgrade in the future, in the mean time you either need new SIM or you handset unlocked. For either call customer services.
I got my MDA Pro a few days ago also, had the same problem as you, basically the handset is network locked, not sure how they managed to lock all UK network, basically give Tmob a call and make sure your stay on the line until they provide with an unlock code, i got mine, now my old sim works and my handset is unlocked
I got my MDA Pro a few days ago also, had the same problem as you, basically the handset is network locked, not sure how they managed to lock all UK network, basically give Tmob a call and make sure your stay on the line until they provide with an unlock code, i got mine, now my old sim works and my handset is unlocked
i had the same problem with my ASUS P535 (here is France) with new SIM card.
seen from :http://vip.asus.com/forum/view.aspx?id=20070818011855796&board_id=6&model=P535&page=1&SLanguage=en-us
Thanks.
I had the same problem BUT-
I had the same problem but i had been using the sim card successfully with the exec for a year, after a hard reset it doesnt recognise the sim. will a ROM upgrade fix it or is it a hardware failiure?
My solution
lauriewsmith said:
I had the same problem but i had been using the sim card successfully with the exec for a year, after a hard reset it doesnt recognise the sim. will a ROM upgrade fix it or is it a hardware failiure?
Click to expand...
Click to collapse
I had this happening to me just last week with a card that works all the time. Then followed that I had no sound coming off speakers or bluetooth. In my case it was a third party software problem. Don't ask me which as I install and uninstall too many applications and my Uni gets in a tangle sometimes. A soft reset instantly (in terms!) restored phone activities and sound, so I recommend a reset if you haven't tried it already. Maybe you will need more than one.
Hello..
I last night put my phone onto "flight mode" so that i was not distrubed in the night if a text came through....
this morning i set it back to normal but the network reception reported NO SERVICE
when it had not come back this evening.... i put my sim in a different phone and used a different network's sim card in my pda.... NO SERVICE was reported for this as well but the sim that was placed in the other phone registered on o2 as soon as the phone was switched on
I've only just bought my MDA but off ebay... although it was new i am unable to contact the seller... please can anybody help??
email me to [email protected] or [email protected] if anybody can help
Thanks
MORE info re above
Hi again
In my frustration I have swapped sims again and this time put VODAFONE pay as you go sim in the MDA Magician above.... It found the network and i was able to ring/text from it.....
On putting the O2 Sim Back into the MDA it said NO SERVICE again.....
But using that very same sim in my nokia finds a network.....
The MDA is originally a TMOBILE one that has been unlocked...
ANY help on this would be very appreciated as I'm very annoyed that it's stopped working.
Thank you
Soft reset?
Although, I think taking your batter out and swapping sims may count as a soft reset.
Thanks for the reply - but again that did not solve it... besides to eliminate this i did a HARD RESET as well and re configured it....
I've even RE UNLOCKED it in case this was the problem
(its a T MOBILE PDA) with an O2 SIM IN...... I bought it in November time and unlocked it the same time... My O2 Sim has been working ok in it until the other night when i decided to put it in "flight mode"(so i wasn't disturbed at night)
Im suspecting that it anything to do with IMEI number vs SIM CARD number? Could this have been blocked somehow to that phone?
Its very confusing as it WORKS with VODA sim and DOESNT with O2 yet the SAME O2 sim works in my old nokia 6610.... aaarggghhhh!! LOL
If your MDA works with a Vodafone SIM, it certainly can't be blacklisted for all UK networks since it picks up Vodafone. Secondly, it sounds more like a SIM card issue relating strictly to the MDA. What happens when you try another O2 SIM card in the same MDA?
Make sure the O2 SIM hasn't been damaged in some way, if all fails you might want to take the MDA to T-Mobile to see if they can determine whether its IMEI has been blacklisted for certain networks. Otherwise a ROM upgrade may also help fix the problem.
Good Luck
My guess is that your magician is reported & listed as stolen. Probably not all providers are using the same list with blocked IMEI numbers. Which can explain that one sim works & the other doesn't though works in an other phone.
See if you can find a list for your country on the web. There are some references to such lists in this forum.
Regards, M
check which band your phone is using....
go Phone>Options>band> then select auto
Ok, I have been browsing this forum for a solution to my problem and none seem too specific, at least for my BA wm6.
Here is the problem: I just received a dual sim adapter (the one that needs cutting) -both sims work fine. I can't get them to switch from one sim to the other from my phone. power on/off and flight mode won't do it either. I tried phone alarm, dual sim switcher, and wivit. They don't work for my phone. I also have a wm2003 se BA and tried it on there and I was only to get the dual sim to switch once. So now the dual sim is stuck on SIM2. So it doesn't matter which phone I use I can only use the sim that is on the SIM 2 slot! Blah!!
What I need: A program, or anything to switch my SIMs for my BA wm6. I don't want to keep taking out my sim and open the sim adapter and switch the two sims all the time.
Edit: after fooling around with my 2003se BA I managed to get the Dual Sim Manager to work again, and I noticed that despite switching SIMS, phone information alway display the default SIM. Does this mean that it is not switching? Does this mean that it does switch but the phone does not display it? If latter is the case then I am in big trouble! One SIM has unlimited internet and texting and other one is just a basic plan. Please help! I don't want a surprise bill!
Edit: Sorry, I needed an answer so I'm feverishly testing this crap out. And the answer is yes the sim changes but the phone does not display so. The trick I used is texting my account info and voila! Two different accounts! So, now over to my wm6 BA and check that out
I'm really surprised, that people are so patient to fight with such an uneffective and clumsy device as dual SIM adapter: you have to cut/destroy those SIM cards, then you have to pray that i works with your phone...
I really think, that if you really need to use 2 SIMcards, why not buying a 2nd phone, or just a special phone with 2 radios and for 2 SIMs.
And please don't tell me it's "for comfort" - dualSIM is antiComfort...
There are other solutions that you don't need to cut the sim, one that I have seen is the addapter is placed in the sim slot and the simm are part of the battery pack.
Bottom line is that that one sucks as well.
I feel there is a valid need in my line of work were I would need at least 3 laptops to support the Builds of my customers however VMWare gets me by fine.
As for the phone, I need 2, carry 2 and hate it.
So I would be a buyer if there was anything around worth having. (which as I still have a BA seems not the case).
Dual Sim Problem
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
JFLB said:
Hi pharmeceutikle,
I wonder how this device works for BA at all!
I tried an adapter like yours of a friend of mine and it just doesn't work with my BA.After inserted, I don't see any new menu for it and when I restart the BA, it shows invalid sim message at startup. I have installed a WM6.1 ROM downloaded at this site [20749 (Build 20749.1.4.0 PV DVH) - v13] and my radio version is 1.12 (by the way, it was 1.15 but 1.12 is the only one that worked fine for my device). The same adapter, once installed on a Motorola phone of my friend works pretty fine! so, it's not a problem with the adapter, I guess...
Did you change anything on registry? could you please tell me how did you proceed since cutting the sims until you got it to work, please?
Many thanks!
Click to expand...
Click to collapse
This dual sim adapter only works if you have a working STK ROMs. I believe I used Helmi's original wm6 as one of them and then I went to others but I can't quite remember which. I posted an experiment with the all the ROMS I used awhile ago so just do a search under my name. Anyways, I couldn't get it to switch sims normally so I had to reset the damn thing all the time. I would go to the STK menu and choose either sim 1 or 2 and then quit out and then reset my phone for it to make the change which really is a pain. As soon as my second sim ran out I just tossed the infernal thing and stuck one sim per phone! Sorry couldn't be much more of a help.
Thanks
Thanks anyway I'll keep searching for a while.
Hi, I just bought an HTC HD2 off ebay and its got a sim card problem, when I try putting my O2/ T mobile sim cards in it switches off the phone part, all other functions work so you can still use it as a PDA, it does also occasionally reboot itself when I use it for the internet. Any help would be much appreciated. I bought the phone as a faulty unit so knew it had a sim card problem, but not the rebooting prob.
woz111 said:
Hi, I just bought an HTC HD2 off ebay and its got a sim card problem, when I try putting my O2/ T mobile sim cards in it switches off the phone part, all other functions work so you can still use it as a PDA, it does also occasionally reboot itself when I use it for the internet. Any help would be much appreciated. I bought the phone as a faulty unit so knew it had a sim card problem, but not the rebooting prob.
Click to expand...
Click to collapse
Hello, I have the same problem with HTC HD2.telefon works in WM 6.5 super and when I put the SIM card mementalno WM crashes and can not it will turn. Remove the SIM is operating normally
Hello all, I bought a used HD2 off CL (USA), hoping to unlock it (if locked) and use it with my ATT prepaid sim.
Outwardly, the phone looks fine and everything about it works quite nicely, EXCEPT that when I insert my SIM card and start the phone, it shows me an exclamation mark on the antenna icon. When I disable all wireless connections and then re-enable it, the icon now changes to the SIM card icon with an 'x' next to it, and I am shown a screen with a keypad and the following message: 'The SIM card is missing. You can still make emergency calls if your service provider supports it.'
Thinking it was a ROM issue, I successfully loaded the latest ROM from [showthread.php?t=789506] but it did not resolve the issue. There is no issue with the SIM because it works nicely with my AT&T Samsung a607. There are no signal strength issues either.
Please help!
Can someone please provide some insight on my situation? I hope I haven't posted in the wrong forum; if so, mods may move it to the appropriate place.
Any advice on diagnosing the issue will be appreciated; I don't even know why the phone is acting the way it is. Many thanks!
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Thanks much for the reply. Other phones usually prompt for a SIM unlock code by themselves... why doesn't this one?
Running simlock.exe from Windows does give me the message "Network is locked, please input unlock code". Before I buy the code, I want to make sure that there's nothing physically wrong with the phone. It should give me at least *some* sign that my SIM is being recognized, but rejected due to network-locking, no?
Thanks again!
See thats the thing. With a foreign SIM card in the device, IF LOCKED, simlock.exe should run automatically on startup and ask for the code....so honestly I do not know if your device is messed up somehow, or if its just being wonky for the sake of being wonky. Perhaps you might want to flash a new Radio ROM and see if it then recognizes your SIM. BE SURE to NOT flash one with .51 in its name.
Thanks again. Can you point to a thread with detailed instructions for flashing a new radio ROM for my device? I found many threads while searching and I am confused. I don't want to choose the wrong instructions and brick this device; I haven't done anything of this sort before.
Look at the top of these forums for a stickie by Snarksneeze that will teach you everything you need to know.
Hi again... I don't have a spare 8GB MicroSD card lying around. Is there any way I can do this flashing over USB? I did read that there's a risk associated with flashing over USB (cable yanks, power loss, etc.) but I did flash the newest ROM without any issue, and hopefully I can do the same for the new Radio ROM.
The Radio version shown in the 'About Phone' section is 2.14.50.04, btw.
You can use your 16GB that came with the phone, or any other one for that matter. That requirement is more of a recomendation really. I have flashed with my stock 16GB many times. And yes, you can do it via USB aswell.
OK, so I have more information about the problem. I got the phone unlocked (I heartily recommend 'fastunlocker' on eBay) thinking that it would solve the issue... but it didn't. But, on a lark, I tried my friend's post-paid T-Mobile SIM in the HD2 and it worked! My AT&T pre-paid SIM does not... can this be a problem? The damn thing works nicely in other (unlocked) phones.
Is anyone else successfully using a AT&T GoPhone (prepaid) SIM on a TMOUS HTC HD2?
It may very well be the problem then. I have heard that some phones are incompatible with pre-paid SIMs.
God, that would suck donkeyballs. Can someone confirm that an unlocked TMOUS HD2 does not work with AT&T GoPhone prepaid SIMs?
had this same exact issue and realized that one of the pins in the sim card reader was stuck in the down position. I poked it with a small screwdriver and it popped back into place. works like a charm now.
Thanks for the reply. Are you sure this is the issue? As I mentioned in a previous post in this thread, my friend's T-Mobile SIM works nicely with the phone.
EDIT: Also, are you using it with an AT&T GoPhone SIM?
Bump... anyone?
Final bump: maybe I am SOL. :'(
Is anyone successfully using a TMOUS HD2 with an AT&T Prepaid (GoPhone) SIM?
Give it some time. Sometimes threads at XDA stay dormant for months and then suddenly BAM! a breakthrough happens.
I would say its your sim. How old is it?
I had the exact same problem. I bought a HD2 off cl and put my sim in and got the no sim message and exclamation point. I was using a sim from the voicesteam days but guess what it worked just fine in the Nexus one I had just gotten so I figured it had to be the phone. I finally used a friends sim and it worked fine. So I would turn the phone off in settings then slip his sim out with the battery still in and put my sim in and turn the phone back on. Guess what, it would work for about 10 min then it would suddenly go back to no sim message. So I went and got a new sim from T-Mobile and walla works like a charm. So try what I did and if you end up with the same problem try a new sim from AT&T. I don't know what is different about the HD2 but there something about the older sims that it doesn't like.
Hope that helps!
Hey... thanks for ther reply! My SIM is brand new (about two weeks old). I will however go to the AT&T store and get it replaced to see if it fixes the problem. Thanks again, I appreciate it.
Dear look my problem...
ashasaur said:
Wait a moment, so your device isnt already SIM unlocked? Sounds to me like you need to go ahead and get an unlock code for it, then navigate to the \Windows folder and hit up the program called "simlock.exe" and input your unlock code, then try your ATT SIM again.
Click to expand...
Click to collapse
-----------
I have a HTC HD2 working excellent with my card. Some day i received message : card is missing ....like you.
But restarting 2-3 times all ok. In a week the same problem again here.
Now i cant make a call. The same card in another hd2 works good. Any other card in MINE phone is missing...
Please help me.
Many thanks
[email protected]