Related
In the power settings on the WM side, I can set to "Turn off device if not used for x minutes". When the device turns off, how do you turn it back on?
The only thing that I have been able to figure out, is to use the Shift Control on Vista side to Reset SnapVUE. Am I missing something?
I am running ThaiHugos snapvue+gps rom.
i believe it's auto...
i believe that when you press the button to go to the snapview side it gets swiched on automatically...
vulcan_gr said:
i believe that when you press the button to go to the snapview side it gets swiched on automatically...
Click to expand...
Click to collapse
That is the first thing that I tried. And the screen remains black. I also tried to press the button to go to the snapview side, and then slide the power button (the same as bringing Vista out of sleep). No go.
Did you try pressing it twice? When the screen powers off, pressing the "Shift" button will shift the device to Vista but the screen will be blank if Vista is not running. Pressing it again shifts it back to SnapVue and the screen should come back again.
At least that is what happens with the stock rom!
Regards,
Dave
Go to settings -->connections-->USB to PC and check "enable advanced network functionality" for some reason this causes problems with resuming.
sniveri said:
Go to settings -->connections-->USB to PC and check "enable advanced network functionality" for some reason this causes problems with resuming.
Click to expand...
Click to collapse
Thanks! Works again. But it is a bummer as I cannot use USBTool when this is unchecked.
If someone would make new version of usb-tool that unchecks that setting if it is registrysetting and maybe sets "turn of device if not used" to "never" when usbtool is in use. When querying usbtool to close it would undo those changes. This would not be hard to do after all?
sniveri said:
This would not be hard to do after all?
Click to expand...
Click to collapse
In that case, do let us know when you've done it.
Pantaloonie said:
In that case, do let us know when you've done it.
Click to expand...
Click to collapse
I have done launcer that first sets Enable advanced network functionality unchecked via registry and then launches USBTool. After USBTool Exits my launcher sets Enable advanced network functionality to checked state. I did`nt find this registrykey for device turning off yet. I had to do own launcher because I did`nt know where to get sources for USBTool.
I didn`t find correct settings for that "turn off device if not used"-setting so I just made Power-settings to appear Before and after USBTool is executed so I can check and uncheck it easily when I want to use USBTool. Now it works everytime.
sniveri said:
I didn`t find correct settings for that "turn off device if not used"-setting so I just made Power-settings to appear Before and after USBTool is executed so I can check and uncheck it easily when I want to use USBTool. Now it works everytime.
Click to expand...
Click to collapse
How did you make it appear before and after?
Thanks
Ram
Removed the tool for a while..
I withdraw my sarcastic message telling you to make the tool yourself!
This has still one problem.. After rebooting WM side you have to manually go check and uncheck USB to PC setting and after that this works.. Sorry about it
EDIT: It is someway related how the USB-drivers are loaded? After those are once loaded you can switch between them or something, I don`t really know.. But something like this would be nice to get to the next generation of USBTool.
To get this "USB to PC" functionality work there is few registry settings that is changed. First of all there is driver setting that set is the RNDIS or Serial_Class used. Changing this checks and unchecks USB to PC checkbox. This can be found at:
Code:
HKEY_LOCAL_MACHINE\Drivers\USB\FunctionDrivers
There is DefaultClientDriver what changes between RNDIS and Serial_Class.
Other settings are found at:
HKEY_LOCAL_MACHINE\Drivers\Active\ + some number. For USB Driver-settings they change between 50-135(on my machine.. I don`t know about others). For example settings could be found at:
Code:
HKEY_LOCAL_MACHINE\Drivers\Active\120
If you have unchecked "USB to PC" setting, you should have values:
Code:
BusName: USBFN_1_0, REG_SZ
BusParent: 5543120, REG_DWORD
Hnd: 5544944, REG_DWORD
Key: \Drivers\USB\FunctionDrivers\Serial_Class, REG_SZ
Name: COM8: , REG_SZ
For me those BusParent and Hnd settings are something that I don`t understand. Those values varies each time you check and uncheck USB to PC CheckBox. If this could be found out after that you could start rnaap.exe and rapiclnt.exe with correct parameters and after that USBTool should connect right away. So does anyone know how to know what should be used for BusParent and Hnd values. If those are wrong I get error when connecting to "`USB".
Easier solution would be to just show user this USB to PC -window for first place but it has some bug that it closes at the same second when opened with cplmain.cpl, 28 command.
Pantaloonie said:
I withdraw my sarcastic message telling you to make the tool yourself!
Click to expand...
Click to collapse
Only sarcastic thing is that I shared cab which did not do the job actually. It worked for me 15 times but after that I was in trouble again.. but after all device turning off-settings worked fine.
Tried also with IOCTL_UFN_ENUMERATE_AVAILABLE_CLIENTS and IOCTL_UFN_GET_CURRENT_CLIENT. But available clients returns only current client so this was a dead-end too.. I have to give up.
Just a quick question, does the stock ROM have power off after X enabled?
I have disabed power off and have no probems now with any change in battery life (using thaihugo's myself) and just shutdown the screen with the screen switch button. Always comes up then and have no data disconnects.
Just wondered if this should be the norm as never looked at the default setting on the stock ROM.
hi all i want to put 3g in comm manager
becuse i cant turn it of by system > phone
i have some poplems with my sim card
or tell me another way to turn 3g off
oaldawe said:
hi all i want to put 3g in comm manager
becuse i cant turn it of by system > phone
i have some poplems with my sim card
or tell me another way to turn 3g off
Click to expand...
Click to collapse
Use Advanced Config 3.3 to modify your comm manager for the items that you want.
I was able to add beam and 3G.
thanks
i added it but it dosnt work
@ alltheway: have you tried to use the 3g-switch? i was able to set it into my comm manager but it doesn´t work. but in opposite to you i had no icon for it as well.
AllTheWay said:
Use Advanced Config 3.3 to modify your comm manager for the items that you want.
I was able to add beam and 3G.
Click to expand...
Click to collapse
AllTheWay said:
Use Advanced Config 3.3 to modify your comm manager for the items that you want.
I was able to add beam and 3G.
Click to expand...
Click to collapse
this was the first thing i tried. no luck! grayed...
It appears that if the PHONE setting is not displayed (the least useful switch if you ask me) then the DATA CONNECTIONS and 3G tabs will bevgreyed out an inaccessible.
Having said that, turning off data connection seems to be useless. It turns itself on the moment Opera or anything tries to access the net. I haven't tried it roaming yet but am going abroad next week so will update then.
I don't see the option in Advanced Config 3.3.
Any solution yet how to get 3G into the Comm Manager?
It's not in the regular options. Got to MENU (right soft key) then MORE SETTINGS then COMM MANAGER
Perhaps we need a 10 Button Manager
This is why it would be SOOOOO useful to have the old 10 button manager back from the Hermes days, just like the thread I started 14 Dec 08, but got no-where....
http://forum.xda-developers.com/showthread.php?t=459270
Just wish Schaps or some one would be able to help out and create a new 10 button manager and resolve ALL our issues.
Thank you, but doesn't work for me also. I need an option to change 3G to GPRS...
Hi!
In order that it works 3G in CommManager it is necessary to add a few values in the register.
I detail the steps, if you want to do it.
To enable 3G I have replaced it with Direct Push option, because I do not use her, but it can be for any different.
First we change the option "Direct Push" for "3G":
You should accede to the key of the register "\HKLM\Software\HTC\CommManager\4" and to change the value "AUTD" that appears in "(default)" for "3G".
Now we have to add two values in the register in order that on having clic in the CommManager on the option of 3G, it should change GSM to 3G:
You should accede to the key of the register "\HKLM\Software\OEM\UMTS" and to add the following values (DWORD):
"PrefDomain" value decimal "2"
"PrefRAT" value decimal "1"
Bye and good luck !
Sento
PD: I apologise for my english
ok guys, there is an easy way to do this as AllTheWay stated earlier. Simply use Advanced Config V3.3
Go to Menu (right soft key) > More Settings > Comm Manager and then simply choose which settings you want
See attached screenshot
sento74 said:
Hi!
In order that it works 3G in CommManager it is necessary to add a few values in the register.
I detail the steps, if you want to do it.
To enable 3G I have replaced it with Direct Push option, because I do not use her, but it can be for any different.
First we change the option "Direct Push" for "3G":
You should accede to the key of the register "\HKLM\Software\HTC\CommManager\4" and to change the value "AUTD" that appears in "(default)" for "3G".
Now we have to add two values in the register in order that on having clic in the CommManager on the option of 3G, it should change GSM to 3G:
You should accede to the key of the register "\HKLM\Software\OEM\UMTS" and to add the following values (DWORD):
"PrefDomain" value decimal "2"
"PrefRAT" value decimal "1"
Bye and good luck !
Sento
PD: I apologise for my english
Click to expand...
Click to collapse
Hi sento74!!
Thank you for your suggestion.. It do exactly what you say and i hate install a utility only to do a mod.. i like do by myself if is possible ..just the case!
Nice One
Regards
Hi all ...just got the HD2 yesterday ...so far fairly impressed with it ..battery usage is a little scary down to 58 after 15 hours and most of those hours where at night ...but still got to be kind of realistic with the size of screen and cpu it has anyway could anyone help/tell me a way to turn off the vibrate function will typing on the keyboard... I’m finding typing is not a problem at with the standard setup just the annoying vibrate feedback ...ive gone through all the menus on the phone looking for the option to turn it off but nothing found also quickly checked the forum to, and didn’t see anything???..
thanks
Go to the settings tab, select the topmost option for adjusting background, tabs, etc. On the next screen you'll find an option for turning vibration feedback on/off.
Actual names might be different as I'm using a Dutch language ROM.
thank you ...was looking in the wrong place ..(the keyboard setup menu)
HD2 (Leo) Disabling keyboard vibration
Thank you..You are absolutely correct.. missed this one and was looking in all other places.
Its located under Sense UI settings > Personalize > Vibration
Thanks again..
Atomzk said:
Go to the settings tab, select the topmost option for adjusting background, tabs, etc. On the next screen you'll find an option for turning vibration feedback on/off.
Actual names might be different as I'm using a Dutch language ROM.
Click to expand...
Click to collapse
doing this doesn´t disable the vibration on my keyboard what can i do?
Settings -> Personalize -> Vibration. Untick the box for 'Vibrate when I tap buttons in HTC Sense,....'
doing the above will also lose the feedback vibration while clicking the tabs in homescreen...... the other simple way to only disable vibration in keyboard alone is do the following registry tweak
Using Resco Registry, go to Hkey Local Machine / Software / HTC / ezsip
Add a new DWORD Value string and call it "VibrationEnabled" (without the quotes) and give it a value of 0.
then Soft reset and enjoy!
or install this cab.
I need help in disabling vibration when using the keyboard. I've tried to look for it in the forums and in the device settings but did not find anything. There is no personalization in the Settings tab.
I know the setting is in there somewhere. A search for "vibrate typing" turned up amongst others:
http://forum.xda-developers.com/showthread.php?t=588026
http://forum.xda-developers.com/showthread.php?t=630388&highlight=vibrate+typing
I guess you'll find the answer in both of those threads.
15dty said:
I know the setting is in there somewhere. A search for "vibrate typing" turned up amongst others:
http://forum.xda-developers.com/showthread.php?t=588026
http://forum.xda-developers.com/showthread.php?t=630388&highlight=vibrate+typing
I guess you'll find the answer in both of those threads.
Click to expand...
Click to collapse
thanks for the links! but i think the HD2 US that i have does not have that remove vibration option in the settings. i tried to look for that option in all the settings but i could not find it. if it's there, then i definitely need to have my eyes checked.
Im running a generic HTC ROM on my T9193 model; go to the Settings tab (in Sense), then Personalize, then Vibration
Using Resco Registry go to
Hkey Local Machine > Software > HTC > ezsip
Add a new DWORD Value string and call it "VibrationEnabled" (without the quotes) and give it a value of 0.
Soft reset and BAM!
But this is with Resco Registry, with another reg edit program, i am not sure what kind of string you are adding, hopefully it is still called DWORD.
matthewf01 said:
Im running a generic HTC ROM on my T9193 model; go to the Settings tab (in Sense), then Personalize, then Vibration
Click to expand...
Click to collapse
I don't have Personalize in Settings tab!
the_cool said:
Using Resco Registry go to
Hkey Local Machine > Software > HTC > ezsip
Add a new DWORD Value string and call it "VibrationEnabled" (without the quotes) and give it a value of 0.
Soft reset and BAM!
But this is with Resco Registry, with another reg edit program, i am not sure what kind of string you are adding, hopefully it is still called DWORD.
Click to expand...
Click to collapse
Yes, this works! I'm a happy camper now. Thank you!!!
woohoo! enjoy the hell out of your vibrationless keyboard!
the_cool said:
woohoo! enjoy the hell out of your vibrationless keyboard!
Click to expand...
Click to collapse
You're the man , thank u for saving my precious battery energy :">
Thanks for the reg tip,I had it off in preferences and also off in BSB tweaks too but it was still there untill this reg tweak.
Thanks
the_cool said:
Using Resco Registry go to
Hkey Local Machine > Software > HTC > ezsip
Add a new DWORD Value string and call it "VibrationEnabled" (without the quotes) and give it a value of 0.
Soft reset and BAM!
But this is with Resco Registry, with another reg edit program, i am not sure what kind of string you are adding, hopefully it is still called DWORD.
Click to expand...
Click to collapse
awsome works for me thanks
the_cool said:
Using Resco Registry go to
Hkey Local Machine > Software > HTC > ezsip
Add a new DWORD Value string and call it "VibrationEnabled" (without the quotes) and give it a value of 0.
Soft reset and BAM!
But this is with Resco Registry, with another reg edit program, i am not sure what kind of string you are adding, hopefully it is still called DWORD.
Click to expand...
Click to collapse
This is really useful, especially because it turns off only keyboard vibration. Thank you very much!
If anyone is still having issues with this problem there is an easier way without messing around with the registry. From any screen hit the Windows button to the right of the home button on the phone itself, not the touchscreen. Then find the "settings" icon and tap that. Next you will see a "personalize" tab and tap it, at the very bottom of those options you will see a "vibration" tab, tap that and you will be taken to a screen that allows you to change the settings for the keyboard, simply uncheck the box, tap done and your all set
Mr_windycityxxx said:
If anyone is still having issues with this problem there is an easier way without messing around with the registry. From any screen hit the Windows button to the right of the home button on the phone itself, not the touchscreen. Then find the "settings" icon and tap that. Next you will see a "personalize" tab and tap it, at the very bottom of those options you will see a "vibration" tab, tap that and you will be taken to a screen that allows you to change the settings for the keyboard, simply uncheck the box, tap done and your all set
Click to expand...
Click to collapse
I'm using the NRG ROM, and those instructions don't make any sense to me. Also, be aware that the stock TMOUS ROM (as I recall, I didn't use it long), does not give access to the standard "Settings" icon except via the Sense tab.
stevedebi said:
I'm using the NRG ROM, and those instructions don't make any sense to me. Also, be aware that the stock TMOUS ROM (as I recall, I didn't use it long), does not give access to the standard "Settings" icon except via the Sense tab.
Click to expand...
Click to collapse
You are correct, on a stock ROM if I remember right you have to go to Settings>Menu>All Settings>Personal>Imput I think it has been a little while since I used any Windows Mobile ROMs now.
Registry hack worked for me.
Would be interesting to determine impact on battery life.
TMOUS-Sense Vibration Settings
This is an old thread but there was a recent reply. For the T-Mobile HD2 with a stock ROM amd/or the Sense overlay, go to the Settings tab, select Personalize, select Vibration and then uncheck the box. However, this did not turn off vibration for the Swype keyboard.
If you have another ROM, then these settings may not be available via this method. BSB Tweaks has settings to turn off/on vibration for HTC apps and calculator vibration. Of course, the registry editing will work. I have found the Resco registry editor to be easy and useful.
First off, i have spent several hours looking through this forum and cannot find an answer.
I turned off sense yesterday through the home/today settings in the settings menu so i could just see what the base os looked like and now i cannot access the settings menu, or turn sense back on. Also there is no link in my start menu for settings. Not in the tools, or app folder.
Please forgive me if this is a wasteful post i didnt know where else to ask.
Thanks
Enable it through BSB Tweaks.
start button > settings > home > check sense
He said he couldn't access the settings menu in the start menu because it would redirect to the sense one which was disabled. . .BSB Tweaks can enable the regular settings menu so he can enable sense again.
hklm/security/shell/start info
change hidesettings to 0 and it will show in start menu.
Thanks all.
Thank you. I am so used to android. The reg tibp and the bsb tip both work, but i actually made a script to pull the settings program wrom the windows dir onto the menu as a short cut.
Im glad there are people on here willing t help!