Hi all,
I often have to work in different countries and when I cross border coming home with my car, the phone keeps being on the foreign network for quite a while- meaning roaming and huge costs - before automatically changing to my provider.
If I want to make a call and avoid costs I need to go in comm manager/settings/phone/network tab/ and finally click find network.
That is 5 clicks.
Is it possible to have an exe I could map to a soft/hard key to automatically launch "find network"???
I searched the board but couldn't find anything.
thank you for you answers.
brad
Hello,
just asking again sorry. Anyone can help?
Is it possible to launch "find network" from phone settings with a small software or mortscript? similar to wifi or bluetooth toggle but for finding cellular network.
Thank you for your help.
Brad
I'd like to have something like this too. Anyone can help us?
ok.I think I made what you needed.I attached it at the bottom.Just unzip the file,and copy it to windows/start menu/programs.Every time you lunch it,it will display the network connections
Ps.If you use less than 7 programs in the quick menu,the you can copy it in windows/start menu and when you push start,it will show you my shortcut
Thank you very much. Now I try it
Related
Undoubtly there will be some
Just wanted to ask if you guys changed/did any settings to make the Hermes to make it work better with the network.
I'm also planning to upgrade to WM6 and i need to save the GPRS and MMS settings to 3 so that it will work again, currently mine are all vodaphone ones as i have a vodaphone version of the hermes.
Also we're not able to use the '3' portal that is normally on a contract handset right?
Thanks in advance
Jason
bump? anyone please?
Not on 3 anymore, but do know that the portal can't be loaded on the Hermes, irrespective of the version you use. It's something to do with 3 not the phone, their pages are just not compatible.
As for the settings, they've been posted on the site already, use the search facility. You can also try www.filesaveas.co.uk.
thanks for your advice latinoxxx.
i have seen the settings posted twice here. therefore i dont know which one to use.
please could someone paste the correct ones down. it will save me from asking again if i get it wrong
thanks in advance for the help guys. really appriciate it.
sugest you try THIS. Its the settings setup program from HTC:
[/list]
[*]Under Network Settings Wizard click the "Download Software" Button
[*]On the next page tick the box, then in the drop down menu which appears select "Network Settings Wizard-UK" then click "Download"
[*]Save the zip file, and run the .exe it has inside it (make sure your Hermes is connected to activesync).
[*]Select the three network and i think it should setup your device with the correct settings?!?
[/list]
Try that out??
thank you so much mr vanx, you dont know how much i appriciate this.
btw, someone has started a thread about "Call for Operator Settings for ALL NETWORKS "
maybe if you add this tool there, it may save a few posts and guarentee that the settings are correct since they are form HTC and given by the operators themselves.
thanks again
If I press wlan button in Comm Manager than WiFi should be ON but it is not. I did use some different roms but still nothing. Somebody know what to do ?
settings-connections-wireless lan - there is only message:
Wireless LAN is OFF.Turn on Wireless LAN.
It does not work. Please help me.
Go back to wm5. If your lucky it might come back. The more I dig through here the more I see people with wifi problems after flashing. You might be out of luck
HOWEVER
I noticed under WM6 the bubble that pops up when you click on the wifi tower ALWAYS says 'turn on wifi'
Good luck!
Same problem with my WI-FI, Not working please help!!!!
Hi All. I am facing the same problem with my WI-FI as Vomithaus is having. Whenever I try to to connect to WIFI from Commmanager, it tries to and then to show disconnected. When i go to settings> Wireless LAN, it asks me to "Configure Network Adaptors", and lists all the adaptors and going into them asks about the ip settings and stuff like that. By the Way I Bricked my phone once and then i flashed with T-Mobile Ship WM6.0 RUU for the WING. And I strongly suspect that the registry setting are not right or the Radio ROM is F***ed up. Can any knowledgeable person help me please? I would greatly appreciated any help.
Same problem with my WI-FI, Not working please help!!!!
This is the addeneum to the last post. The last remaining screenshot for the above post. The last screen shot of the "Wi-Fi Status" in the "Settings > Connection", gives me an option to "Turn on Wi-Fi" but toggeling it results in nothing. Thank You everybody for your time and consideration.
It might help us to figure out how this happened too. I bought the EXEC off of ebay and it was like this from the get go. The previous owner flashed it to wm6 about 1 month ago, but said it was working fine... all he did was hard reset to get rid of the personal information. I want to believe him, but there are a few people on here complaining of flashing the exec and losing wifi. (even the official rom from O2).
Flashing COULD have damaged the transmitter, but it seems more likely that a setting is wrong somewhere (especially since there is a slider bar for WIFI battery vs performance).
This is good news (somewhat), but the bad news is that if there is one, no one knows about it. I have messed around in the registry (there were some promising entries related to POWER), but nothing that even showed a response. I found the entry that connects to the slider bar, but PERFORMANCE = zero, so there is nowhere to go there but WORSE.
This really sucks, is all I can say. I blew $500 on something that is useless (well... not useless, but no WIFI? WHY COULD IT HAVE NOT BEEN BLUETOOTH!)
Another step I have taken is contacting PPC Tech's via email and asking them if they have any idea how to repair it, and how much $$$
I'll keep you informed.
Can you tell me if yours EVER worked, and if so, when it stopped?
I just looked closer at your screenshots.... Do you have a WIFI card? (it say's 'adapter').
No, I dont have a WIFI card but this is way how windows handles all is peripherals (services), as an add-on card. just like you laptop.
Guys, There is a registry fix for this problem.
Please take look here :
http://forum.xda-developers.com/showpost.php?p=1475527&postcount=14
Ron
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
In my herald i can't see TNETWLN1 or TNETWLN12345 too.
I did use Mobile Registry Editor for that , what you guys are useing?
(sorry for my English, if you dont understand me just tell me please)
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
f_v_man said:
I am afraid Ron that this is not a case as suggested in Beowulf6's solution. If it is the solution I dont know how to exactly implement it. But I am posting here the exact registry key screenshot for you guys to take a look also. I can't see and TNETWLN1 or TNET12345 key here in my device. I still think it has to something with the registry. Can any one here with a T-Mobile WING verify and post their screen shot? or maybe send me a registry backup to compare with? It would be really grateful it some does that. Thanks everybody for a few seconds to read this.
Click to expand...
Click to collapse
It is like Bio88 says.
You are already on the right track... click on WLAN and you will find the key.
Change the value of the key into TNETWLAN1
Done
bio88 said:
Look at the screenshots, there a Reg Folder with the name WLAN, open it, and then open the key with all the numbers and letters. At the end of that line is a code. TNETWLAN1 is what it should be for the Herald.
Click to expand...
Click to collapse
Hi Please look at my screen shot again clearly. I did post what is inside the WLAN folder. There are only two keys :
1) (Default) \Windows\ctlpnl.exe
2) CmdLine cplmain17
I still can't figure where is the key with numbers and letters. Sorry If I am a bit dumb or wrong. Thanks.
it is possible if you use the default Commanager that you dont have this registry key.
I dont know if it helps if you create it on your own.
but for me where i installed a different commanager, the Key was there and i edited it for the wlan button.
My Tmo Wing has "TIACXWLN1" in that registry key.
Do those changes apply to the herald and the Wing interchangeably?
Anyone can change the weather location and get weather updates?
I tried many times and it returns error saying search service is not enabled....
It works a bit weird
Yes I did that. Origami is cool. I seem to remember that selecting another city is difficult as hell. You really have to give an "enter" keystroke to accept the new city.
Keep trying, it must work .!
origami
after first boot of my shift, closed origami. than i'm gone on control pannel and unistalled it.
Adding a different city
Intuitively, you would think you could change the city as with HTC Home, but not the case here. MS knows better, you need to tap the settings gear then add a new tile. When you add the new weather tile, you get to search the new city by name or by zip code (USA). Then if you are annoyed by the default Seatle Weather tile, remove it! Try connected to WiFi and/or through GSM. I beleive the WiFi connected and updated when I added my local town.
thanks for the replies, I tried all methods and it still gives me the message : Can't search for the location, The search service or the internet connection may be unavailable"
I of course have internet connection established and available for all other programs...
Is there a registry fix?
We heard you
pitt1983 said:
after first boot of my shift, closed origami. than i'm gone on control pannel and unistalled it.
Click to expand...
Click to collapse
We understand, you don't want Origami Experience. Fine for you, you don't have to post it in any thread that discusses OE.
vaio said:
thanks for the replies, I tried all methods and it still gives me the message : Can't search for the location, The search service or the internet connection may be unavailable"
I of course have internet connection established and available for all other programs...
Is there a registry fix?
Click to expand...
Click to collapse
I have the same issue. I am not able to update weather tile.
I have now found out, you have to set your location and system locale to United States to make it work..... not sure why there is such requirement....
Guys,
My apologies if this has been covered but I'd like to know if there is a fix, trick, or software you can recommend that will allow me to save files to a particular area.
Maybe I am missing something (unfortunately at the moment I don't have much time/resources to go hunting for the answer myself) but whenever I save a file via Bluetooth it gets saved to some remote part on the My Device/Windows.
I then have to perform a search to find out where the file has been saved to.
Obviously there is a simple solution to this and again I apologies in advance but can someone point me in the right direction.
Cheers.
Go to Settings, Connections, OBEX Inbox and change there.
I have attached the cab if you don't already have this installed.
xmsnx said:
Go to Settings, Connections, OBEX Inbox and change there.
I have attached the cab if you don't already have this installed.
Click to expand...
Click to collapse
Many thanks xmsnx.... appreciated.
Not had chance yet to try but quick question ~ Whats the other .cab file?
didnt work for me!
xmsnx said:
Go to Settings, Connections, OBEX Inbox and change there.
I have attached the cab if you don't already have this installed.
Click to expand...
Click to collapse
Does the dialog box for choosing the destination directory appear on your Touch HD when you press the "..." button?
It doesn't appear on my Touch HD, but it will appear fine on my HP 6828 (320x240, WM6.1).
These are my requests that I have which would actually "complete" my perfect HD2... if any members here would like to contribute some info as to how I may go about and fulfill them, then I would have much gratitude. Thanks
-Aside from the volume control that MysticGenious posted along with his taskbar, is there any other cab or registry change that will allow me to change my volume in increments of 1 as opposed to 3 bars each time? I am familiar with the paid app, but I do not want to go that route.. If mysticGenious created something that works when you use his taskbar, then I'm sure someone else has created something.
-Take the application "FootPrints" for example... Unless I have that activated on my tab screens, I am unable to create a shortcut so that I can save it on as a quicklink. This is the same with the HTC Calender App and any other tab application. If its not active in the Tab menu then the shortcuts doesn't exist. Is there a workaround? I would like to use Foot Prints, but I only want it as a quicklink, NOT as a Tab folder. I have already tried activating the tab and creating the shortcut to the quicklinks, but as soon as i removed it from the Tab Menus, it disappeared. There has got to be a way for this to happen. Cause I mean the program is there, but for some reason it only works if its active in Tabs.
-Transformers... I have tried reinstalling the Transformers cab but that didn't work. I just want to be able to click the Transformers shortcut and be able to select either 1 or 2 and then the movie instantly pops up. I have the movies saved on my sd card now, but because i moved them out of the SD card and onto my computer at one point in time, the link that connected them is no longer there. Basically I have all the components, I just need some guidance on how to make the shortcut link and work again... I'm assuming that i have to direct the file via registry editor "Total Commander" or something, I am just confused when it comes to that stuff on my HD2
and believe it or not, thats actually the only issues I have left with the phone, I'm sure that someone has a suggestion, or knows an answer... thanks a lot guys
i haven't given up hope on the members here....
anyone know any information about any of the 3 that i have listed??
*Update*
I have solved my transformers issue...
thanks for the help community???................................................................
ehhh......
well either way.. in case someone runs into the same situation heres the original thread...
http://forum.xda-developers.com/showthread.php?p=6392077#post6392077
cheers...
so any chances someone is gonna be able to point me in right direction for my other requests?? or perhaps even an answer??
cause this is a active hd2 forum, with many users willing to help out each other right???
one can dream.....
wrt links to footprints etc
you should be able to create your own shortcuts to the applications using File Explorer. footprints.exe exists in the Windows directory, you just need to copy it and past as short cut in the windows-start menu-programs directory. These short cuts shouldn't disappear when you disable the tab.
Lynehammike said:
wrt links to footprints etc
you should be able to create your own shortcuts to the applications using File Explorer. footprints.exe exists in the Windows directory, you just need to copy it and past as short cut in the windows-start menu-programs directory. These short cuts shouldn't disappear when you disable the tab.
Click to expand...
Click to collapse
yea you would think so right?? but unfortunately this is the case... and i'm wondering how would we be able to remedy this.. cause yea.. footprinks.lnk does not exist... until it is activated in tabs.. and even if i decide to make a shortcut of the footprints.lnk when it shows up.. the shortcuts becomes inactive one you deactivate the tab...
its WEIRD... i think what it is.. is that HTC put a lock on that application, since its one of their own.. so that it can only work if its activated under sense UI... which sucks..
but yea.. so i've already tried all the "doable" attempts... i'm basically asking someone who is more skilled to tell me whats going on... cause the developers can do amazing things.. this would be a walk in the park...